Yeong Ho Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yeong Ho Lee has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Yong-June Shin
School of Electrical and Electronic Engineering, Yonsei University, Seoul, South Korea
9 shared publications - Geon Seok Lee
Lawrence Berkeley National Laboratory, Berkeley, CA, USA
5 shared publications Song-Ho Sohn
Korea Electric Power Corporation Research Institute, Daejeon, South Korea
4 shared publications- Su Sik Bang
Department of Electronics Engineering, Tech University of Korea, Gyeonggi-do, South Korea
4 shared publications Gu-Young Kwon
School of Electrical and Electronic Engineering, Yonsei University, Seoul, South Korea
3 shared publications- Gu-Young Kwon
The Department of Smart Information Technology Engineering, Kongju National University, Cheonan 31080, Republic of Korea
3 shared publications
Latest Publications
- 17 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (5) , 1-10
Application of Enhanced Optimal-Detection of Time–Frequency Domain Reflectometry on HTS Cable With High-Resolution
Time–frequency domain reflectometry (TFDR) has been used for sensing various types of cables including high temperature superconducting (HTS) cables. Recently, the optimal-detection of time–frequency domain reflectometry (OD-TFDR) has been proposed and has better detection and localization performance than conventional TFDR. Additionally, OD-TFDR has provided a threshold that can distinguish detected signals from Gaussian noise. However, OD-TFDR does not provide a criterion for classifying the detected signals into fault signals and artifacts. Furthermore, the diagnosis result of OD-TFDR is not intuitive because an additional tool is needed to locate each fault. Thus, this paper proposes a new diagnosis algorithm that can provides a criterion for distinguishing between artifacts and faults by considering the propagation direction of the incident signal in the join time–frequency domain while preserving the detection and localization performance of OD-TFDR. Through a template matching process of generalized time–frequency cross-correlation (GTFCC), the core algorithm of OD-TFDR, a modified–generalized time–frequency cross-correlation (M–GTFCC) function is derived. Next, a modified–time–frequency cross-correlation (M–TFCC) function is derived by slicing the M–GTFCC function considering the propagation direction of signal. Finally, M–TFCC function is proposed as a new intuitive diagnosis result with artifact-free and high-resolution. The performance of the proposed algorithm is tested via experimental setup for a real-world single phase HTS cable with an emulated local quench by heating element, and the efficacy of the proposed algorithm is verified based on three performances: fault detection, locating accuracy, and resolution.
- 17 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (5) , 1-10
Application of Enhanced Optimal-Detection of Time–Frequency Domain Reflectometry on HTS Cable With High-Resolution
Time–frequency domain reflectometry (TFDR) has been used for sensing various types of cables including high temperature superconducting (HTS) cables. Recently, the optimal-detection of time–frequency domain reflectometry (OD-TFDR) has been proposed and has better detection and localization performance than conventional TFDR. Additionally, OD-TFDR has provided a threshold that can distinguish detected signals from Gaussian noise. However, OD-TFDR does not provide a criterion for classifying the detected signals into fault signals and artifacts. Furthermore, the diagnosis result of OD-TFDR is not intuitive because an additional tool is needed to locate each fault. Thus, this paper proposes a new diagnosis algorithm that can provides a criterion for distinguishing between artifacts and faults by considering the propagation direction of the incident signal in the join time–frequency domain while preserving the detection and localization performance of OD-TFDR. Through a template matching process of generalized time–frequency cross-correlation (GTFCC), the core algorithm of OD-TFDR, a modified–generalized time–frequency cross-correlation (M–GTFCC) function is derived. Next, a modified–time–frequency cross-correlation (M–TFCC) function is derived by slicing the M–GTFCC function considering the propagation direction of signal. Finally, M–TFCC function is proposed as a new intuitive diagnosis result with artifact-free and high-resolution. The performance of the proposed algorithm is tested via experimental setup for a real-world single phase HTS cable with an emulated local quench by heating element, and the efficacy of the proposed algorithm is verified based on three performances: fault detection, locating accuracy, and resolution.
- 6 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (9) , 9494-9503
Contactless Monitoring Technique for Live Shielded Cable via Stepped-Frequency Waveform Reflectometry and Inductive Coupler
Low-voltage shielded cables serve critical roles in controlling and measuring advanced power systems to ensure their reliability and safety. As a consequence, it is important to monitor the cables. However, conventional monitoring techniques for nonoperating power systems are limited regarding safety issues that eventually affect the reliability of a power system and result in economic losses. In this article, a contactless signal communication approach via an inductive coupler is applied to stepped-frequency waveform reflectometry to monitor operating power systems. Additionally, a long short-term memory (LSTM)-based neural network model is adapted to compensate for the nonlinear distortion in signals yielded by couplers. Compared to conventional approaches, LSTM has advantages, as it can restore the nonlinearities of couplers because it can respond to various nonlinear factors, such as the dimension of the coupler, the length of the cable, or the position of the signal application. The proposed reflectometry system for monitoring live shielded cables is tested on 75-m 2-core shielded cables with two cases of fault simulations, and the efficacy of the proposed technique in real fields is also verified.
- 6 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 69 (9) , 9494-9503
Contactless Monitoring Technique for Live Shielded Cable via Stepped-Frequency Waveform Reflectometry and Inductive Coupler
Low-voltage shielded cables serve critical roles in controlling and measuring advanced power systems to ensure their reliability and safety. As a consequence, it is important to monitor the cables. However, conventional monitoring techniques for nonoperating power systems are limited regarding safety issues that eventually affect the reliability of a power system and result in economic losses. In this article, a contactless signal communication approach via an inductive coupler is applied to stepped-frequency waveform reflectometry to monitor operating power systems. Additionally, a long short-term memory (LSTM)-based neural network model is adapted to compensate for the nonlinear distortion in signals yielded by couplers. Compared to conventional approaches, LSTM has advantages, as it can restore the nonlinearities of couplers because it can respond to various nonlinear factors, such as the dimension of the coupler, the length of the cable, or the position of the signal application. The proposed reflectometry system for monitoring live shielded cables is tested on 75-m 2-core shielded cables with two cases of fault simulations, and the efficacy of the proposed technique in real fields is also verified.
- 22 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 31 (5) , 1-5
Time-Frequency Domain Reflectometry for Live HTS Cable System via Inductive Couplers and Neural Network
High-temperature superconducting (HTS) cable has become one of the most promising technology along with an adaptation of a unique superconducting conductor that allows long-distance transmission of the large volume of electronic power with less power loss. Diagnostic and monitoring technique for the reliable and safe operation of HTS cable system has also become a crucial factor to commercialize the HTS cable system in the regarding field. HTS cable system which needs a cooling process for re-activating superconductors is more affected by the loss of cost and time. This paper is proposing the time-frequency domain reflectometry (TFDR) based diagnostic technique for a live HTS cable system. By adapting inductive couplers, the live HTS cable system and the diagnostic signal would communicate without direct contact. Signal attenuation and distortion during the signal induction are compensated by LSTM-based neural network. The proposed method is applied to an AC 154 kV 600 MVA HTS cable system in and is further verified through Advanced Design System (ADS) software.
- 22 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 31 (5) , 1-5
Time-Frequency Domain Reflectometry for Live HTS Cable System via Inductive Couplers and Neural Network
High-temperature superconducting (HTS) cable has become one of the most promising technology along with an adaptation of a unique superconducting conductor that allows long-distance transmission of the large volume of electronic power with less power loss. Diagnostic and monitoring technique for the reliable and safe operation of HTS cable system has also become a crucial factor to commercialize the HTS cable system in the regarding field. HTS cable system which needs a cooling process for re-activating superconductors is more affected by the loss of cost and time. This paper is proposing the time-frequency domain reflectometry (TFDR) based diagnostic technique for a live HTS cable system. By adapting inductive couplers, the live HTS cable system and the diagnostic signal would communicate without direct contact. Signal attenuation and distortion during the signal induction are compensated by LSTM-based neural network. The proposed method is applied to an AC 154 kV 600 MVA HTS cable system in and is further verified through Advanced Design System (ADS) software.
- 28 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 70 (00189456) , 1-11
Defect Detection in Pipelines via Guided Wave-Based Time–Frequency-Domain Reflectometry
In order to improve the performance of the conventional guided wave testing (GWT) with a low sensitivity on damage in pipelines, a new GWT based on time-frequency-domain reflectometry (TFDR) is proposed. TFDR using electromagnetic signals is a diagnostic technique for electrical cables, and the signal is analyzed in both time and frequency domains to enhance the resolution of faults in the electrical cables. Since it is impossible to directly apply the TFDR methodology for electrical cables to the pipelines, this article presents new TFDR methodologies suitable for the ultrasonic characteristics of the pipelines. The proposed technique is demonstrated by experiments using a real-world pipeline. The analysis of the experimental results depending on the changes in the defect size and internal material of the pipeline is provided, and the performance of the proposed technique is confirmed by the experiments.
- 28 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 70 (00189456) , 1-11
Defect Detection in Pipelines via Guided Wave-Based Time–Frequency-Domain Reflectometry
In order to improve the performance of the conventional guided wave testing (GWT) with a low sensitivity on damage in pipelines, a new GWT based on time-frequency-domain reflectometry (TFDR) is proposed. TFDR using electromagnetic signals is a diagnostic technique for electrical cables, and the signal is analyzed in both time and frequency domains to enhance the resolution of faults in the electrical cables. Since it is impossible to directly apply the TFDR methodology for electrical cables to the pipelines, this article presents new TFDR methodologies suitable for the ultrasonic characteristics of the pipelines. The proposed technique is demonstrated by experiments using a real-world pipeline. The analysis of the experimental results depending on the changes in the defect size and internal material of the pipeline is provided, and the performance of the proposed technique is confirmed by the experiments.
- 7 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 29 (5) , 1-5
Insulation Characteristics and Fault Analysis of HTS Cable via Stepped Frequency Waveform Reflectometry
The characteristics of the HTS cable including conductivity, permittivity, and insulation characteristics vary depending on the conditions of temperature and pressure during operations. We propose a diagnostic method that estimates the propagation constant of the HTS cable and detect the location and the degree of the fault using stepped frequency waveform reflectometry. The performance of proposed method is verified by the HTS cable experiment regarding the propagation constant estimation and the fault detection. The results of HTS cable cooled by the liquid nitrogen are also compared with the results at the room temperature to analyze the insulation characteristics change according to the state. The proposed method is expected to be further applied to monitor the condition of HTS cable system regarding temperature and pressure.
- 7 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 29 (5) , 1-5
Insulation Characteristics and Fault Analysis of HTS Cable via Stepped Frequency Waveform Reflectometry
The characteristics of the HTS cable including conductivity, permittivity, and insulation characteristics vary depending on the conditions of temperature and pressure during operations. We propose a diagnostic method that estimates the propagation constant of the HTS cable and detect the location and the degree of the fault using stepped frequency waveform reflectometry. The performance of proposed method is verified by the HTS cable experiment regarding the propagation constant estimation and the fault detection. The results of HTS cable cooled by the liquid nitrogen are also compared with the results at the room temperature to analyze the insulation characteristics change according to the state. The proposed method is expected to be further applied to monitor the condition of HTS cable system regarding temperature and pressure.
- 22 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 66 (10) , 8116-8125
Time–Frequency-Based Condition Monitoring of 22.9-kV HTS Cable Systems: Cooling Process and Current Imbalance
In this paper, new time-frequency-based anomaly detection methodology is proposed for the condition monitoring of high-temperature superconducting (HTS) cable systems. The time-frequency-based anomaly detection methodology includes two indices, which are obtained via cross Wigner-Ville distribution and scattering parameter. For the validation of the proposed methodology, the methodology is applied to an ac 22.9-kV/50-MVA HTS cable system connected to the real power grid network. Furthermore, the changes in dielectric properties of the HTS cable system during the cooling process and the current imbalance failure are monitored. The proposed anomaly detection indices are shown to be able to detect the heat and the current imbalance caused by the malfunction of the joint box. For the application of the two validated indices, new anomaly detection procedure for HTS cable systems is also presented.
- 22 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 66 (10) , 8116-8125
Time–Frequency-Based Condition Monitoring of 22.9-kV HTS Cable Systems: Cooling Process and Current Imbalance
In this paper, new time-frequency-based anomaly detection methodology is proposed for the condition monitoring of high-temperature superconducting (HTS) cable systems. The time-frequency-based anomaly detection methodology includes two indices, which are obtained via cross Wigner-Ville distribution and scattering parameter. For the validation of the proposed methodology, the methodology is applied to an ac 22.9-kV/50-MVA HTS cable system connected to the real power grid network. Furthermore, the changes in dielectric properties of the HTS cable system during the cooling process and the current imbalance failure are monitored. The proposed anomaly detection indices are shown to be able to detect the heat and the current imbalance caused by the malfunction of the joint box. For the application of the two validated indices, new anomaly detection procedure for HTS cable systems is also presented.
- 27 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 28 (4) , 1-5
Monitoring Method for an Unbalanced Three-Phase HTS Cable System via Time-Frequency Domain Reflectometry
In this paper, we propose a new time-frequency based analysis method that monitors the state of the high temperature superconducting (HTS) cable system in a real-time manner and detects the current imbalance of HTS cable system. The new time-frequency-based method utilizes the cross Wigner–Ville distribution to analyze the time-frequency localized phase difference of the reflected signal, which varies depending on the insulation characteristics of the HTS cable system. Also, a real-world AC 22.9 kV 50 MVA HTS cable system and a current source are used to validate the performance of the new monitoring method in order to detect current imbalance phenomenon.
- 27 February 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 28 (4) , 1-5
Monitoring Method for an Unbalanced Three-Phase HTS Cable System via Time-Frequency Domain Reflectometry
In this paper, we propose a new time-frequency based analysis method that monitors the state of the high temperature superconducting (HTS) cable system in a real-time manner and detects the current imbalance of HTS cable system. The new time-frequency-based method utilizes the cross Wigner–Ville distribution to analyze the time-frequency localized phase difference of the reflected signal, which varies depending on the insulation characteristics of the HTS cable system. Also, a real-world AC 22.9 kV 50 MVA HTS cable system and a current source are used to validate the performance of the new monitoring method in order to detect current imbalance phenomenon.
- 16 January 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 27 (4) , 1-5
Monitoring Electrical and Thermal Characteristics of HTS Cable Systems via Time–Frequency Domain Reflectometry
A high-temperature superconducting (HTS) cable system with the 22.9 kV, 50 MVA, and 410 m length is installed and operated at 154 kV Icheon substation of Korea Electric Power Corporation (KEPCO). Unfortunately, it is a difficult task to diagnose and monitor electrical and thermal characteristics of the HTS cable system in a real-time manner. In order to protect operational failures of grid-connected HTS cable systems, this paper proposes time-frequency domain reflectometry (TFDR) and analysis techniques, i.e., time-frequency cross correlation and instantaneous frequency estimation. To verify the performance of the proposed method, the temperature is changed via the cryogenic refrigeration system and the status of the grid-connected HTS cable is monitored via TFDR in a real-time manner.
- 16 January 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 27 (4) , 1-5
Monitoring Electrical and Thermal Characteristics of HTS Cable Systems via Time–Frequency Domain Reflectometry
A high-temperature superconducting (HTS) cable system with the 22.9 kV, 50 MVA, and 410 m length is installed and operated at 154 kV Icheon substation of Korea Electric Power Corporation (KEPCO). Unfortunately, it is a difficult task to diagnose and monitor electrical and thermal characteristics of the HTS cable system in a real-time manner. In order to protect operational failures of grid-connected HTS cable systems, this paper proposes time-frequency domain reflectometry (TFDR) and analysis techniques, i.e., time-frequency cross correlation and instantaneous frequency estimation. To verify the performance of the proposed method, the temperature is changed via the cryogenic refrigeration system and the status of the grid-connected HTS cable is monitored via TFDR in a real-time manner.
- 9 January 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 27 (4) , 1-5
Analysis of Wave Propagation of HTS Cables for Compensation of Thermal Loss on Connectors
High temperature superconducting (HTS) cable operates under relatively low temperature and its unique operating condition brings new challenges in the area of maintenance and diagnostics of the cable. As an example, a temperature difference occurs on connection systems between instruments on room temperature and HTS cables which eventually leads to thermal energy loss. The thermal energy loss affects frequency characteristics of the cable which are critical aspects for simulation and maintenance of the HTS cable systems. In this paper, an attempt to reduce thermal loss is introduced with an improved connector applying a Peltier module. The performance of the designed connector is verified with analysis of electromagnetic wave propagation properties of HTS tapes and a cable. The investigation of S -parameters and the proposed connection method is expected to be further applied to various HTS systems in future.
- 9 January 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 27 (4) , 1-5
Analysis of Wave Propagation of HTS Cables for Compensation of Thermal Loss on Connectors
High temperature superconducting (HTS) cable operates under relatively low temperature and its unique operating condition brings new challenges in the area of maintenance and diagnostics of the cable. As an example, a temperature difference occurs on connection systems between instruments on room temperature and HTS cables which eventually leads to thermal energy loss. The thermal energy loss affects frequency characteristics of the cable which are critical aspects for simulation and maintenance of the HTS cable systems. In this paper, an attempt to reduce thermal loss is introduced with an improved connector applying a Peltier module. The performance of the designed connector is verified with analysis of electromagnetic wave propagation properties of HTS tapes and a cable. The investigation of S -parameters and the proposed connection method is expected to be further applied to various HTS systems in future.