Yoichi M. A. Yamada
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Yoichi M. A. Yamada has a total of 229 co-authors. Here are the top co-authors by number of shared publications:
Yasuhiro Uozumi
Institute for Molecular Science (IMS) 444-8787 Okazaki Aichi Japan
90 shared publicationsAya Ohno
RIKEN Center for Sustainable Resource Science
47 shared publications- Yasuhiro Uozumi
Institute for Molecular Science, Myodaiji, Okazaki 444-8787, Japan
46 shared publications Takuma Sato
Green Nanocatalysis Research Team, RIKEN Center for Sustainable Resource Science, Wako, Saitama 351-0198, Japan
32 shared publicationsHeeyoel Baek
RIKEN Center for Sustainable Resource Science
26 shared publicationsAbhijit Sen
RIKEN Center for Sustainable Resource Science (CSRS) Wako Saitama Japan
12 shared publications
Latest Publications
- Open Access
- 10 September 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Microwave electric field-induced dynamic hydration enables selected dehydration of formic acid over a poly(m-phenolsulfonic acid–formaldehyde Catalyst
Formic acid is a promising renewable C1 feedstock and a safe liquid precursor for on-demand carbon monoxide (CO) production. However, selective dehydration of formic acid to CO remains challenging because solid acid catalysts generally require high temperatures and suffer from competing dehydrogenation and water-induced inhibition of acid sites. Here, we report the selective dehydration of formic acid over a poly(m-phenolsulfonic acid–formaldehyde) (PAFR II) catalyst under microwave irradiation. PAFR II afforded CO in 65% yield at 120 C without detectable formation of hydrogen or carbon dioxide. The catalyst was reused three times while maintaining selective CO formation. PAFR II showed stable catalytic activity during continuousflow dehydration, exhibiting a CO productivity of 31–37 mmol g-1 h-1. This activity was higher than that of previously reported solid acid catalysts operating at or below 150 °C. The resulting CO was directly used for the alkoxycarbonylation of iodobenzene to afford propyl benzoate in 92% yield, demonstrating the practical applicability of this system as an on-demand CO source. Water-addition experiments showed that adsorbed water strongly inhibited dehydration. Microwave electric-field irradiation afforded substantially higher activity than magnetic-field irradiation and conventional heating. Fourier-transform infrared difference spectroscopy and phase-resolved modulation infrared spectroscopy revealed reversible changes in adsorbed water around the sulfonic acid moieties under microwave irradiation. These results suggest that the microwave electric field dynamically modulates the hydration structure around the acid sites, temporarily increasing their accessibility to formic acid.
- 10 September 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessMicrowave electric field-induced dynamic hydration enables selected dehydration of formic acid over a poly(m-phenolsulfonic acid–formaldehyde Catalyst
Formic acid is a promising renewable C1 feedstock and a safe liquid precursor for on-demand carbon monoxide (CO) production. However, selective dehydration of formic acid to CO remains challenging because solid acid catalysts generally require high temperatures and suffer from competing dehydrogenation and water-induced inhibition of acid sites. Here, we report the selective dehydration of formic acid over a poly(m-phenolsulfonic acid–formaldehyde) (PAFR II) catalyst under microwave irradiation. PAFR II afforded CO in 65% yield at 120 C without detectable formation of hydrogen or carbon dioxide. The catalyst was reused three times while maintaining selective CO formation. PAFR II showed stable catalytic activity during continuousflow dehydration, exhibiting a CO productivity of 31–37 mmol g-1 h-1. This activity was higher than that of previously reported solid acid catalysts operating at or below 150 °C. The resulting CO was directly used for the alkoxycarbonylation of iodobenzene to afford propyl benzoate in 92% yield, demonstrating the practical applicability of this system as an on-demand CO source. Water-addition experiments showed that adsorbed water strongly inhibited dehydration. Microwave electric-field irradiation afforded substantially higher activity than magnetic-field irradiation and conventional heating. Fourier-transform infrared difference spectroscopy and phase-resolved modulation infrared spectroscopy revealed reversible changes in adsorbed water around the sulfonic acid moieties under microwave irradiation. These results suggest that the microwave electric field dynamically modulates the hydration structure around the acid sites, temporarily increasing their accessibility to formic acid.
- Open Access
- 20 August 2026
- Published by Wiley in European Journal of Organic Chemistry
- Vol. 29 (37) , e70787
Direct Conversion of Aryl Iodides Into Benzylamines by Aminomethylation: Reaction Scope, Mechanistic Studies, and Applications
Despite the high utility and value of benzylamines and their derivatives, their synthesis is hindered by a limited substrate availability and nonreusable transition‐metal catalysts. To that end, this study develops an aminomethylation strategy using aryl iodides and formamides while examining the substrate scope and underlying mechanism for synthesizing benzylamines under parts‐per‐million‐level (65 ppm) reusable palladium catalysis. This method can accommodate a wide range of substrates, including electron‐rich and electron‐deficient aryl, polyaryl, and heteroaryl iodides. Similarly, various formamide derivatives yield aminomethylated products. This aminomethylation strategy is used to directly synthesize biologically active molecules, such as a rivastigmine analog, and natural products, e.g., gramine. In addition, tryptamine, a serotonin receptor, and diindolylmethane, a metabolite, are successfully produced by derivatizing the aminomethylated products. Isotope‐labeling experiments indicate that formamide derivatives were precursors for the reducing agent, in addition to providing both amines and carbon. A plausible catalytic pathway is proposed based on isotope‐labeling experiments and density functional theory calculations, providing insights for future research and new applications in organic synthesis and medicinal chemistry.
- 20 August 2026
- Published by Wiley in European Journal of Organic Chemistry
- Vol. 29 (37) , e70787
Open AccessDirect Conversion of Aryl Iodides Into Benzylamines by Aminomethylation: Reaction Scope, Mechanistic Studies, and Applications
Despite the high utility and value of benzylamines and their derivatives, their synthesis is hindered by a limited substrate availability and nonreusable transition‐metal catalysts. To that end, this study develops an aminomethylation strategy using aryl iodides and formamides while examining the substrate scope and underlying mechanism for synthesizing benzylamines under parts‐per‐million‐level (65 ppm) reusable palladium catalysis. This method can accommodate a wide range of substrates, including electron‐rich and electron‐deficient aryl, polyaryl, and heteroaryl iodides. Similarly, various formamide derivatives yield aminomethylated products. This aminomethylation strategy is used to directly synthesize biologically active molecules, such as a rivastigmine analog, and natural products, e.g., gramine. In addition, tryptamine, a serotonin receptor, and diindolylmethane, a metabolite, are successfully produced by derivatizing the aminomethylated products. Isotope‐labeling experiments indicate that formamide derivatives were precursors for the reducing agent, in addition to providing both amines and carbon. A plausible catalytic pathway is proposed based on isotope‐labeling experiments and density functional theory calculations, providing insights for future research and new applications in organic synthesis and medicinal chemistry.
- 22 July 2026
- Published by Wiley in Chemistry – A European Journal
- Vol. 32 (40) , e71429
Heat‐Induced Granular Motion in Quasi‐Solid‐State Suzuki–Miyaura Reaction
Solid‐state cross‐coupling is a promising synthetic strategy, enabling green processes and access to otherwise unattainable products. To date, avoiding the harsh mechanical force while achieving the synthesis of highly insoluble materials under mild, additive‐free, and solid‐state conditions remains a challenge especially if heterogeneous catalysis is considered. Inspired by the fundamental diffusion dynamics observed in nature, we developed a polymeric palladium‐catalyzed quasi‐solid‐state Suzuki–Miyaura reaction that proceeds without mechanical input; that is, a granular motion of the components results from heat‐induced convection‐driven mass transfer. This approach enabled the synthesis of various polycyclic aromatic hydrocarbons and functional materials in up to 93% yields with Pd loadings as low as 500 mol ppm. Gram‐scale synthesis of dinaphthyl anthracene as a functional material was successfully achieved under the quasi‐solid‐state reaction conditions. Notably, since no mechanical force is applied during the reaction, it is well‐suited to be analyzed in real time, which is a challenge in solid‐state systems. As a result, in‐situ monitoring of the chemical changes of each of the solid reactants allowed the identification and real time monitoring of a boronate intermediate. In addition, direct microscopic visualization revealed changes in morphology and element distributions, proposing a granular motion mechanism for this transformation.
- 22 July 2026
- Published by Wiley in Chemistry – A European Journal
- Vol. 32 (40) , e71429
Heat‐Induced Granular Motion in Quasi‐Solid‐State Suzuki–Miyaura Reaction
Solid‐state cross‐coupling is a promising synthetic strategy, enabling green processes and access to otherwise unattainable products. To date, avoiding the harsh mechanical force while achieving the synthesis of highly insoluble materials under mild, additive‐free, and solid‐state conditions remains a challenge especially if heterogeneous catalysis is considered. Inspired by the fundamental diffusion dynamics observed in nature, we developed a polymeric palladium‐catalyzed quasi‐solid‐state Suzuki–Miyaura reaction that proceeds without mechanical input; that is, a granular motion of the components results from heat‐induced convection‐driven mass transfer. This approach enabled the synthesis of various polycyclic aromatic hydrocarbons and functional materials in up to 93% yields with Pd loadings as low as 500 mol ppm. Gram‐scale synthesis of dinaphthyl anthracene as a functional material was successfully achieved under the quasi‐solid‐state reaction conditions. Notably, since no mechanical force is applied during the reaction, it is well‐suited to be analyzed in real time, which is a challenge in solid‐state systems. As a result, in‐situ monitoring of the chemical changes of each of the solid reactants allowed the identification and real time monitoring of a boronate intermediate. In addition, direct microscopic visualization revealed changes in morphology and element distributions, proposing a granular motion mechanism for this transformation.
- Open Access
- 20 May 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Direct Conversion of Aryl Iodides to Trialkylamines via Aminomethylation: Reaction Scope, Mechanistic Studies, and Applications
Despite the high utility and value of trialkylamines and their derivatives, their synthesis is hindered by a limited substrate availability and non-reusable transition-metal catalysts. To that end, this study develops an aminomethylation strategy using aryl iodides and formamides while examining the substrate scope and underlying mechanism for synthesizing trialkylamines under parts-per-million-level (65 ppm) reusable palladium catalysis. This method can accommodate a wide range of substrates, including electron-rich and electrondeficient aryl, polyaryl, and heteroaryl iodides. Similarly, various formamide derivatives yield aminomethylated products. This aminomethylation strategy is used to directly synthesize biologically active molecules, such as a rivastigmine analog, and natural products, e.g., gramine. In addition, tryptamine, a serotonin receptor, and diindolylmethane, a metabolite, are successfully produced by derivatizing the aminomethylated products. Isotopelabeling experiments indicate that formamide derivatives were precursors for the reducing agent, in addition to providing both amines and carbon. A plausible catalytic pathway is proposed based on isotope-labeling experiments and density functional theory calculations, providing insights for future research and new applications in organic synthesis and medicinal chemistry.
- 20 May 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessDirect Conversion of Aryl Iodides to Trialkylamines via Aminomethylation: Reaction Scope, Mechanistic Studies, and Applications
Despite the high utility and value of trialkylamines and their derivatives, their synthesis is hindered by a limited substrate availability and non-reusable transition-metal catalysts. To that end, this study develops an aminomethylation strategy using aryl iodides and formamides while examining the substrate scope and underlying mechanism for synthesizing trialkylamines under parts-per-million-level (65 ppm) reusable palladium catalysis. This method can accommodate a wide range of substrates, including electron-rich and electrondeficient aryl, polyaryl, and heteroaryl iodides. Similarly, various formamide derivatives yield aminomethylated products. This aminomethylation strategy is used to directly synthesize biologically active molecules, such as a rivastigmine analog, and natural products, e.g., gramine. In addition, tryptamine, a serotonin receptor, and diindolylmethane, a metabolite, are successfully produced by derivatizing the aminomethylated products. Isotopelabeling experiments indicate that formamide derivatives were precursors for the reducing agent, in addition to providing both amines and carbon. A plausible catalytic pathway is proposed based on isotope-labeling experiments and density functional theory calculations, providing insights for future research and new applications in organic synthesis and medicinal chemistry.
- Open Access
- 27 April 2026
- Published by Springer Nature in Communications Chemistry
- Vol. 9
Polymeric iridium catalysts for C–H borylation of arenes under batch and continuous flow conditions
Iridium-catalyzed direct C-H borylation of arenes has been extensively studied as an efficient method for synthesizing arylboronates. However, this transformation predominantly relies on homogeneous iridium catalysts, which are typically air-sensitive and difficult to recover. Here we show that pyridine-containing polymeric iridium catalysts can promote C-H borylation under both batch and continuous flow conditions. A ternary copolymer synthesized from 4-vinylpyridine, 4-tert-butylstyrene, and N-isopropylacrylamide served as an effective support for immobilizing and stabilizing the iridium species. This catalyst enabled batch C-H borylation of 20 arenes with yields up to 87%, as well as continuous flow synthesis of borylated products under ambient air conditions for over 24 h. XAFS analysis revealed partial reduction of the iridium precursor during catalyst preparation and in situ during the borylation reaction. This study provides an instructive and practical approach for designing immobilized iridium catalysts, thereby advancing the diverse applications of C-H borylation reactions.
- 27 April 2026
- Published by Springer Nature in Communications Chemistry
- Vol. 9
Open AccessPolymeric iridium catalysts for C–H borylation of arenes under batch and continuous flow conditions
Iridium-catalyzed direct C-H borylation of arenes has been extensively studied as an efficient method for synthesizing arylboronates. However, this transformation predominantly relies on homogeneous iridium catalysts, which are typically air-sensitive and difficult to recover. Here we show that pyridine-containing polymeric iridium catalysts can promote C-H borylation under both batch and continuous flow conditions. A ternary copolymer synthesized from 4-vinylpyridine, 4-tert-butylstyrene, and N-isopropylacrylamide served as an effective support for immobilizing and stabilizing the iridium species. This catalyst enabled batch C-H borylation of 20 arenes with yields up to 87%, as well as continuous flow synthesis of borylated products under ambient air conditions for over 24 h. XAFS analysis revealed partial reduction of the iridium precursor during catalyst preparation and in situ during the borylation reaction. This study provides an instructive and practical approach for designing immobilized iridium catalysts, thereby advancing the diverse applications of C-H borylation reactions.
- 20 April 2026
- Published by Georg Thieme Verlag KG in Synlett
- Vol. 37 (14) , 1442-1446
Direct Photocatalytic Trifluoromethyl-Carboxylation of Enamides: A Gateway to α-Trifluoroethyl Phenylglycines
Dedicated to Professor Masakatsu Shibasaki on the occasion of his 80th birthday. Incorporation of the trifluoromethyl (CF₃) groups is a well-established tactic to improve pharmacokinetic properties—metabolic stability, lipophilicity, and bioavailability—of bioactive molecules, including amino acids. Here we report a visible-light photocatalytic method for the direct trifluoromethyl carboxylation of enamides using sodium trifluoromethanesulfinate (CF₃SO₂Na) and CO₂, catalyzed by [Ir(ppy)₂(dtbbpy)](PF6). The reaction proceeds via a radical pathway and enables concurrent installation of CF₃ and carboxyl groups in a single step to furnish α-trifluoroethylated arylglycines. The protocol shows broad functional-group tolerance, accommodating halogen, alkyl, trifluoromethyl, and acetamido substituents on aryl enamides. This strategy provides streamlined access to CF₃-containing amino acid motifs relevant to medicinal chemistry and materials science. Received: 05 March 2026 Accepted after revision: 14 April 2026 Accepted Manuscript online: 20 April 2026 Article published online: 29 April 2026 © 2026. Thieme. All rights reserved. Georg Thieme Verlag KG Oswald-Hesse-Straße 50, 70469 Stuttgart, Germany
- 20 April 2026
- Published by Georg Thieme Verlag KG in Synlett
- Vol. 37 (14) , 1442-1446
Direct Photocatalytic Trifluoromethyl-Carboxylation of Enamides: A Gateway to α-Trifluoroethyl Phenylglycines
Dedicated to Professor Masakatsu Shibasaki on the occasion of his 80th birthday. Incorporation of the trifluoromethyl (CF₃) groups is a well-established tactic to improve pharmacokinetic properties—metabolic stability, lipophilicity, and bioavailability—of bioactive molecules, including amino acids. Here we report a visible-light photocatalytic method for the direct trifluoromethyl carboxylation of enamides using sodium trifluoromethanesulfinate (CF₃SO₂Na) and CO₂, catalyzed by [Ir(ppy)₂(dtbbpy)](PF6). The reaction proceeds via a radical pathway and enables concurrent installation of CF₃ and carboxyl groups in a single step to furnish α-trifluoroethylated arylglycines. The protocol shows broad functional-group tolerance, accommodating halogen, alkyl, trifluoromethyl, and acetamido substituents on aryl enamides. This strategy provides streamlined access to CF₃-containing amino acid motifs relevant to medicinal chemistry and materials science. Received: 05 March 2026 Accepted after revision: 14 April 2026 Accepted Manuscript online: 20 April 2026 Article published online: 29 April 2026 © 2026. Thieme. All rights reserved. Georg Thieme Verlag KG Oswald-Hesse-Straße 50, 70469 Stuttgart, Germany
- Open Access
- 11 February 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (8) , 3897-3898
Correction: Upcycling waste polyoxymethylene to value-added chemicals using reusable polymeric acid catalysts at ppm levels
Correction for ‘Upcycling waste polyoxymethylene to value-added chemicals using reusable polymeric acid catalysts at ppm levels’ by Abhijit Sen et al. , Green Chem. , 2026, 28 , 2814–2821, https://doi.org/10.1039/D5GC06065F.
- 11 February 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (8) , 3897-3898
Open AccessCorrection: Upcycling waste polyoxymethylene to value-added chemicals using reusable polymeric acid catalysts at ppm levels
Correction for ‘Upcycling waste polyoxymethylene to value-added chemicals using reusable polymeric acid catalysts at ppm levels’ by Abhijit Sen et al. , Green Chem. , 2026, 28 , 2814–2821, https://doi.org/10.1039/D5GC06065F.
- 5 February 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (4) , 3782-3790
Quadruple Switchable Catalysis: sp 3 C–H Arylation, Aminomethylation, sp 2 C–H Arylation, and Deiodination
- 5 February 2026
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 16 (4) , 3782-3790
Quadruple Switchable Catalysis: sp 3 C–H Arylation, Aminomethylation, sp 2 C–H Arylation, and Deiodination
- Open Access
- 12 January 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (6) , 2814-2821
Upcycling waste polyoxymethylene to value-added chemicals using reusable polymeric acid catalysts at ppm levels
Waste polyoxymethylene (POM) plastic was upcycled using m -phenolsulfonic acid-formaldehyde resin, a polymeric catalyst, to afford value-added chemicals, including insecticides and herbicides, using biomass-derived alcohols, amines or water.
- 12 January 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (6) , 2814-2821
Open AccessUpcycling waste polyoxymethylene to value-added chemicals using reusable polymeric acid catalysts at ppm levels
Waste polyoxymethylene (POM) plastic was upcycled using m -phenolsulfonic acid-formaldehyde resin, a polymeric catalyst, to afford value-added chemicals, including insecticides and herbicides, using biomass-derived alcohols, amines or water.
- Open Access
- 17 November 2025
- Published by Springer Nature in Research Square
Polymeric Iridium Catalysts for C–H Borylation of Arenes under Batch and Continuous Flow Conditions
Arylboronates are key intermediates in the synthesis of pharmaceuticals and functional materials, yet their direct C–H borylation typically requires air-sensitive homogeneous iridium catalysts, limiting catalyst recovery and scalability. Here we show that pyridine-containing polymer-supported Ir catalysts can promote C–H borylation under both batch and continuous flow conditions. A ternary copolymer synthesized from 4-vinylpyridine, 4- tert -butylstyrene, and N -isopropylacrylamide served as an effective support for immobilizing and stabilizing the Ir species, yielding the polymeric Ir catalyst. This catalyst enabled batch C–H borylation of 20 arenes with yields up to 87% and continuous flow synthesis of borylated products under air, producing multiple compounds in a single reactor over 42 h. XAFS analysis revealed partial reduction of the Ir(III) precursor during catalyst preparation and in situ during the borylation reaction. This study provides a practical approach for designing immobilized iridium catalysts, advancing the scalable application of C–H borylation reactions.
- 17 November 2025
- Published by Springer Nature in Research Square
Open AccessPolymeric Iridium Catalysts for C–H Borylation of Arenes under Batch and Continuous Flow Conditions
Arylboronates are key intermediates in the synthesis of pharmaceuticals and functional materials, yet their direct C–H borylation typically requires air-sensitive homogeneous iridium catalysts, limiting catalyst recovery and scalability. Here we show that pyridine-containing polymer-supported Ir catalysts can promote C–H borylation under both batch and continuous flow conditions. A ternary copolymer synthesized from 4-vinylpyridine, 4- tert -butylstyrene, and N -isopropylacrylamide served as an effective support for immobilizing and stabilizing the Ir species, yielding the polymeric Ir catalyst. This catalyst enabled batch C–H borylation of 20 arenes with yields up to 87% and continuous flow synthesis of borylated products under air, producing multiple compounds in a single reactor over 42 h. XAFS analysis revealed partial reduction of the Ir(III) precursor during catalyst preparation and in situ during the borylation reaction. This study provides a practical approach for designing immobilized iridium catalysts, advancing the scalable application of C–H borylation reactions.