Yizhou Zhang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yizhou Zhang has a total of 133 co-authors. Here are the top co-authors by number of shared publications:
- Hao Li
Advanced Institute for Materials Research (WPI-AIMR), Tohoku University, Sendai, 980-8577, Japan
8 shared publications - Bryan W. Boudouris
Charles D. Davidson School of Chemical Engineering, Purdue University, West Lafayette, IN 47907, USA
5 shared publications - William A. Phillip
Department of Chemical and Biomolecular Engineering, University of Notre Dame, Notre Dame, Indiana 46556, United States
5 shared publications - Xunda Feng
State Key Laboratory of Advanced Fiber Materials Center For Advanced Low‐Dimension Materials and College of Materials Sciences and Engineering Donghua University Shanghai China
4 shared publications - Baomin Wang
State Key Laboratory of Fine Chemicals, Frontier Science Center for Smart Materials, School of Chemical Engineering Dalian University of Technology Dalian P. R. China
3 shared publications - Dawei Yang
State Key Laboratory of Fine Chemicals, Frontier Science Center for Smart Materials, School of Chemical Engineering Dalian University of Technology Dalian P. R. China
3 shared publications
Latest Publications
- Open Access
- 13 November 2026
- Published by American Chemical Society (ACS) in Macromolecules
Mesophase-Derived Polymer Membranes with Precisely Defined Pores for Molecular and Ion Separations
Polymer membranes are central components in critical technologies, including energy generation and storage, water purification, and chemical separations. There are pressing needs for membranes that transport uncharged and charged molecular, or ionic species, with bespoke selectivity and high permeability in these technological areas, including the growing need for efficient critical mineral separations and resource recovery. For these and other challenging molecular or ionic separations, the focus is on membranes with 1 nm scale (0.5–2 nm) pores that can offer both size- and affinity-based mechanisms for separation. This perspective discusses the current state of the art in nanoporous polymer membranes and reviews recent progress toward the realization of ideal membranes for such separations—i.e., membranes with uniform, continuous, and precisely defined pores at the 1 nm length scale. Emphasis is placed on materials derived from molecular self-assembly, particularly lyotropic mesophases formed from amphiphilic monomers that can be crosslinked to produce monolithic membranes with well-defined, continuous transport pathways. These materials represent a potentially important advance given their attractive separation performance, and the versatility with which their properties can be modified. Developments in fabrication, pore shape, and pore chemistry control are discussed, along with opportunities to address important contemporary and emerging applications.
- 13 November 2026
- Published by American Chemical Society (ACS) in Macromolecules
Open AccessMesophase-Derived Polymer Membranes with Precisely Defined Pores for Molecular and Ion Separations
Polymer membranes are central components in critical technologies, including energy generation and storage, water purification, and chemical separations. There are pressing needs for membranes that transport uncharged and charged molecular, or ionic species, with bespoke selectivity and high permeability in these technological areas, including the growing need for efficient critical mineral separations and resource recovery. For these and other challenging molecular or ionic separations, the focus is on membranes with 1 nm scale (0.5–2 nm) pores that can offer both size- and affinity-based mechanisms for separation. This perspective discusses the current state of the art in nanoporous polymer membranes and reviews recent progress toward the realization of ideal membranes for such separations—i.e., membranes with uniform, continuous, and precisely defined pores at the 1 nm length scale. Emphasis is placed on materials derived from molecular self-assembly, particularly lyotropic mesophases formed from amphiphilic monomers that can be crosslinked to produce monolithic membranes with well-defined, continuous transport pathways. These materials represent a potentially important advance given their attractive separation performance, and the versatility with which their properties can be modified. Developments in fabrication, pore shape, and pore chemistry control are discussed, along with opportunities to address important contemporary and emerging applications.
- Open Access
- 30 September 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (63) , e75177
Boosting Chiral Separation Through Sinuous 3D Nanochannels With Saddle–Splay Curvature in Biomimetic Membranes
Biological systems commonly leverage curved and geometrically complex transport pathways to create pockets and constrictions for precise molecular discrimination. In contrast, synthetic separation membranes mainly achieve selectivity through controlled pore size and surface chemistry, facing challenges in separating molecules that differ subtly in shape or stereochemistry. Here we report self‐assembled polymeric membranes with sinuous 3D nanochannels whose intrinsic saddle–splay geometry boosts chiral separation. Freestanding nanoporous membranes are readily fabricated by photocuring lyotropic double‐gyroid (GYR) liquid crystals (LCs) formed from amphiphiles bearing chiral moieties. Spatial variation in saddle–splay curvature within these GYR nanochannels clusters chiral selectors into precisely positioned “checkpoints” and imposes strong nanoconfinement, forcing racemates to repeatedly traverse these unavoidable stereoselective sites that cumulatively amplify enantioselectivity. The highly permeable membranes achieve enantiopure separation of model racemates such as ibuprofen, with selectivity nearly 10‐fold higher than their counterparts with sheet‐like or cylindrical‐mesh pores of comparable chemistry and size. This work establishes sinuous 3D nanochannels with saddle‐splay curvature as a biomimetic structural motif for amplifying chiral recognition in synthetic membranes.
- 30 September 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (63) , e75177
Open AccessBoosting Chiral Separation Through Sinuous 3D Nanochannels With Saddle–Splay Curvature in Biomimetic Membranes
Biological systems commonly leverage curved and geometrically complex transport pathways to create pockets and constrictions for precise molecular discrimination. In contrast, synthetic separation membranes mainly achieve selectivity through controlled pore size and surface chemistry, facing challenges in separating molecules that differ subtly in shape or stereochemistry. Here we report self‐assembled polymeric membranes with sinuous 3D nanochannels whose intrinsic saddle–splay geometry boosts chiral separation. Freestanding nanoporous membranes are readily fabricated by photocuring lyotropic double‐gyroid (GYR) liquid crystals (LCs) formed from amphiphiles bearing chiral moieties. Spatial variation in saddle–splay curvature within these GYR nanochannels clusters chiral selectors into precisely positioned “checkpoints” and imposes strong nanoconfinement, forcing racemates to repeatedly traverse these unavoidable stereoselective sites that cumulatively amplify enantioselectivity. The highly permeable membranes achieve enantiopure separation of model racemates such as ibuprofen, with selectivity nearly 10‐fold higher than their counterparts with sheet‐like or cylindrical‐mesh pores of comparable chemistry and size. This work establishes sinuous 3D nanochannels with saddle‐splay curvature as a biomimetic structural motif for amplifying chiral recognition in synthetic membranes.
- 9 September 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (44) , e9199303
A Thiolate‐Bridged Diiron Parent μ ‐Imide Involving as a Key Junction in the Bidirectional Interconversion Between Nitride and Amide
Iron parent imides serve as key intermediates for iron‐promoted nitrogen fixation and ammonia oxidation. However, these active species are difficult to be isolated, and their reactivities are underexplored. So far, only a few multinuclear iron parent imides were reported, but none plays a key intersection during the bidirectional transformation. Herein, we adopt the bulky 1,2,4‐tri( tert ‐butyl)cyclopentadienyl (Cp′) and bidentate 1,3‐propanedithiolate (pdt) ligand to provide the steric protection for the reactive [Fe 2 S 2 ] scaffold. As predicted, the highly active imido species can be captured by this [Fe 2 S 2 ] platform to generate a novel thiolate‐bridged diiron parent μ ‐imide complex 3 . Mössbauer spectroscopy and DFT calculation reveal that 3 features a bent {Fe III −NH 2− −Fe III } framework with two anti‐ferromagnetic coupled, low‐spin Fe(III) centers. Importantly, imide 3 can not only undergo protonation to generate amide and finally release ammonia, but also go through hydrogen atom transfer to regenerate nitride. This reactivity indicates that 3 is a key junction that associates the late stage (N 3− → NH 2− → NH 2 − → NH 3 ) of nitrogen fixation and the initial period (NH 2 − → NH 2− → N 3− ) of ammonia oxidation. Overall, this work provides one available strategy that can stabilize a high‐activity imide and investigate its reactivity of bidirectional interconversion.
- 9 September 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (44) , e9199303
A Thiolate‐Bridged Diiron Parent μ ‐Imide Involving as a Key Junction in the Bidirectional Interconversion Between Nitride and Amide
Iron parent imides serve as key intermediates for iron‐promoted nitrogen fixation and ammonia oxidation. However, these active species are difficult to be isolated, and their reactivities are underexplored. So far, only a few multinuclear iron parent imides were reported, but none plays a key intersection during the bidirectional transformation. Herein, we adopt the bulky 1,2,4‐tri( tert ‐butyl)cyclopentadienyl (Cp′) and bidentate 1,3‐propanedithiolate (pdt) ligand to provide the steric protection for the reactive [Fe 2 S 2 ] scaffold. As predicted, the highly active imido species can be captured by this [Fe 2 S 2 ] platform to generate a novel thiolate‐bridged diiron parent μ ‐imide complex 3 . Mössbauer spectroscopy and DFT calculation reveal that 3 features a bent {Fe III −NH 2− −Fe III } framework with two anti‐ferromagnetic coupled, low‐spin Fe(III) centers. Importantly, imide 3 can not only undergo protonation to generate amide and finally release ammonia, but also go through hydrogen atom transfer to regenerate nitride. This reactivity indicates that 3 is a key junction that associates the late stage (N 3− → NH 2− → NH 2 − → NH 3 ) of nitrogen fixation and the initial period (NH 2 − → NH 2− → N 3− ) of ammonia oxidation. Overall, this work provides one available strategy that can stabilize a high‐activity imide and investigate its reactivity of bidirectional interconversion.
- 8 September 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (44)
A Thiolate‐Bridged Diiron Parent μ ‐Imide Involving as a Key Junction in the Bidirectional Interconversion Between Nitride and Amide
Iron parent imides serve as key intermediates for iron‐promoted nitrogen fixation and ammonia oxidation. However, these active species are difficult to be isolated, and their reactivities are underexplored. So far, only a few multinuclear iron parent imides were reported, but none plays a key intersection during the bidirectional transformation. Herein, we adopt the bulky 1,2,4‐tri( tert ‐butyl)cyclopentadienyl (Cp′) and bidentate 1,3‐propanedithiolate (pdt) ligand to provide the steric protection for the reactive [Fe 2 S 2 ] scaffold. As predicted, the highly active imido species can be captured by this [Fe 2 S 2 ] platform to generate a novel thiolate‐bridged diiron parent μ ‐imide complex 3 . Mössbauer spectroscopy and DFT calculation reveal that 3 features a bent {Fe III −NH 2− −Fe III } framework with two anti‐ferromagnetic coupled, low‐spin Fe(III) centers. Importantly, imide 3 can not only undergo protonation to generate amide and finally release ammonia, but also go through hydrogen atom transfer to regenerate nitride. This reactivity indicates that 3 is a key junction that associates the late stage (N 3− → NH 2− → NH 2 − → NH 3 ) of nitrogen fixation and the initial period (NH 2 − → NH 2− → N 3− ) of ammonia oxidation. Overall, this work provides one available strategy that can stabilize a high‐activity imide and investigate its reactivity of bidirectional interconversion.
- 8 September 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (44)
A Thiolate‐Bridged Diiron Parent μ ‐Imide Involving as a Key Junction in the Bidirectional Interconversion Between Nitride and Amide
Iron parent imides serve as key intermediates for iron‐promoted nitrogen fixation and ammonia oxidation. However, these active species are difficult to be isolated, and their reactivities are underexplored. So far, only a few multinuclear iron parent imides were reported, but none plays a key intersection during the bidirectional transformation. Herein, we adopt the bulky 1,2,4‐tri( tert ‐butyl)cyclopentadienyl (Cp′) and bidentate 1,3‐propanedithiolate (pdt) ligand to provide the steric protection for the reactive [Fe 2 S 2 ] scaffold. As predicted, the highly active imido species can be captured by this [Fe 2 S 2 ] platform to generate a novel thiolate‐bridged diiron parent μ ‐imide complex 3 . Mössbauer spectroscopy and DFT calculation reveal that 3 features a bent {Fe III −NH 2− −Fe III } framework with two anti‐ferromagnetic coupled, low‐spin Fe(III) centers. Importantly, imide 3 can not only undergo protonation to generate amide and finally release ammonia, but also go through hydrogen atom transfer to regenerate nitride. This reactivity indicates that 3 is a key junction that associates the late stage (N 3− → NH 2− → NH 2 − → NH 3 ) of nitrogen fixation and the initial period (NH 2 − → NH 2− → N 3− ) of ammonia oxidation. Overall, this work provides one available strategy that can stabilize a high‐activity imide and investigate its reactivity of bidirectional interconversion.
- 7 September 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (44) , e9113894
Homo/Heterogeneous Dual Active Centers Enable Selective Electrochemical C─N Coupling of CO 2 and Nitrate to Formamide
Electrochemical C─N coupling from carbon dioxide and nitrogen oxoanions offers a sustainable route to value‐added amides, yet achieving high selectivity remains challenging due to competing reaction pathways and insufficient substrate activation. Here we report a homo/heterogeneous dual‐active‐center catalyst that integrates molecular copper phthalocyanine with atomically dispersed chromium sites on porous carbon nanospheres to enable selective electrosynthesis of formamide under neutral conditions. The molecular Cu centers selectively reduce CO 2 to CO, while Cr single atoms promote nitrate (NO 3 − ) and nitrite (NO 2 − ) activation to *NO intermediates, furnishing spatially separated yet kinetically matched reactive species. As a result, the catalyst achieves a formamide faradaic efficiency (FE) of 35.2% from CO 2 and NO 3 – , increasing to 44.9% using NO 2 − , with high stability and activity even at low NO 3 − concentrations. In situ spectroscopy and density functional theory calculations reveal *NO─CO coupling via a *NOCO intermediate as the key pathway. This work establishes a general strategy for designing dual‐site electrocatalysts for selective C─N bond formation.
- 7 September 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (44) , e9113894
Homo/Heterogeneous Dual Active Centers Enable Selective Electrochemical C─N Coupling of CO 2 and Nitrate to Formamide
Electrochemical C─N coupling from carbon dioxide and nitrogen oxoanions offers a sustainable route to value‐added amides, yet achieving high selectivity remains challenging due to competing reaction pathways and insufficient substrate activation. Here we report a homo/heterogeneous dual‐active‐center catalyst that integrates molecular copper phthalocyanine with atomically dispersed chromium sites on porous carbon nanospheres to enable selective electrosynthesis of formamide under neutral conditions. The molecular Cu centers selectively reduce CO 2 to CO, while Cr single atoms promote nitrate (NO 3 − ) and nitrite (NO 2 − ) activation to *NO intermediates, furnishing spatially separated yet kinetically matched reactive species. As a result, the catalyst achieves a formamide faradaic efficiency (FE) of 35.2% from CO 2 and NO 3 – , increasing to 44.9% using NO 2 − , with high stability and activity even at low NO 3 − concentrations. In situ spectroscopy and density functional theory calculations reveal *NO─CO coupling via a *NOCO intermediate as the key pathway. This work establishes a general strategy for designing dual‐site electrocatalysts for selective C─N bond formation.
- 7 September 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (44) , e9113894
Homo/Heterogeneous Dual Active Centers Enable Selective Electrochemical C─N Coupling of CO 2 and Nitrate to Formamide
Electrochemical C─N coupling from carbon dioxide and nitrogen oxoanions offers a sustainable route to value‐added amides, yet achieving high selectivity remains challenging due to competing reaction pathways and insufficient substrate activation. Here we report a homo/heterogeneous dual‐active‐center catalyst that integrates molecular copper phthalocyanine with atomically dispersed chromium sites on porous carbon nanospheres to enable selective electrosynthesis of formamide under neutral conditions. The molecular Cu centers selectively reduce CO 2 to CO, while Cr single atoms promote nitrate (NO 3 − ) and nitrite (NO 2 − ) activation to *NO intermediates, furnishing spatially separated yet kinetically matched reactive species. As a result, the catalyst achieves a formamide faradaic efficiency (FE) of 35.2% from CO 2 and NO 3 – , increasing to 44.9% using NO 2 − , with high stability and activity even at low NO 3 − concentrations. In situ spectroscopy and density functional theory calculations reveal *NO─CO coupling via a *NOCO intermediate as the key pathway. This work establishes a general strategy for designing dual‐site electrocatalysts for selective C─N bond formation.
- 7 September 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (44) , e9113894
Homo/Heterogeneous Dual Active Centers Enable Selective Electrochemical C─N Coupling of CO 2 and Nitrate to Formamide
Electrochemical C─N coupling from carbon dioxide and nitrogen oxoanions offers a sustainable route to value‐added amides, yet achieving high selectivity remains challenging due to competing reaction pathways and insufficient substrate activation. Here we report a homo/heterogeneous dual‐active‐center catalyst that integrates molecular copper phthalocyanine with atomically dispersed chromium sites on porous carbon nanospheres to enable selective electrosynthesis of formamide under neutral conditions. The molecular Cu centers selectively reduce CO 2 to CO, while Cr single atoms promote nitrate (NO 3 − ) and nitrite (NO 2 − ) activation to *NO intermediates, furnishing spatially separated yet kinetically matched reactive species. As a result, the catalyst achieves a formamide faradaic efficiency (FE) of 35.2% from CO 2 and NO 3 – , increasing to 44.9% using NO 2 − , with high stability and activity even at low NO 3 − concentrations. In situ spectroscopy and density functional theory calculations reveal *NO─CO coupling via a *NOCO intermediate as the key pathway. This work establishes a general strategy for designing dual‐site electrocatalysts for selective C─N bond formation.
- Open Access
- 26 August 2026
- Published by Springer Nature in Plasmonics
- Vol. 21 (9) , 3633-3645
Refractive Index Response of Square and Hexagonal Gold Nanoparticle Arrays in a Kretschmann LSPR Sensor
- 26 August 2026
- Published by Springer Nature in Plasmonics
- Vol. 21 (9) , 3633-3645
Open AccessRefractive Index Response of Square and Hexagonal Gold Nanoparticle Arrays in a Kretschmann LSPR Sensor
- 8 June 2026
- Published by Wiley in Angewandte Chemie
Modulating Ni‐O‐V Bridges in NiV‐Layered Double Hydroxides Microspheres for Robust Electrocatalytic Coupling of 1,5‐Pentanediol Oxidation and Nitrate Reduction
The co‐electrolysis system that couples anodic oxidation of biomass‐derived polyols with cathodic nitrate reduction reaction (NO 3 RR) represents a promising strategy for biomass valorization and treatment of high‐salinity wastewater. Here, we synthesize thin NiV‐layered double hydroxides (NiV‐LDHs) microspheres featuring engineered Ni‐O‐V bridge structures as dual‐channel electrocatalysts. The newly constructed Ni‐O‐V bridges confirmed by x‐ray absorption spectroscopy effectively modulate the electronic structures of both Ni and V sites. This synergistic enhancement boosts the performance of both anodic 1,5‐pentanediol electrooxidation to produce glutaric acid (GA) and NO 3 RR to ammonia. The NiV‐LDHs anode enables electrolysis at a low cell voltage of 1.5 V versus RHE, exhibiting a GA Faradaic efficiency of 98.5% and a high GA yield of 2.56 mmol h −1 cm −2 . Operando studies and density functional theory reveal that the strong electronic coupling within NiV‐LDHs optimizes the competitive adsorption between 1,5‐pentanediol and OH* on the catalyst surface. Moreover, the NiV‐LDHs cathode exhibits outstanding NO 3 RR performance, achieving a high ammonia yield of 2.28 mmol h −1 cm −2 with a Faradaic efficiency of 96.1%, surpassing most reported electrocatalysts. A continuous paired electrolysis operation over 240 h successfully produced GA (55.98 g) and NH 4 Cl (23.48 g) powders, demonstrating great potential for industrial application.
- 8 June 2026
- Published by Wiley in Angewandte Chemie
Modulating Ni‐O‐V Bridges in NiV‐Layered Double Hydroxides Microspheres for Robust Electrocatalytic Coupling of 1,5‐Pentanediol Oxidation and Nitrate Reduction
The co‐electrolysis system that couples anodic oxidation of biomass‐derived polyols with cathodic nitrate reduction reaction (NO 3 RR) represents a promising strategy for biomass valorization and treatment of high‐salinity wastewater. Here, we synthesize thin NiV‐layered double hydroxides (NiV‐LDHs) microspheres featuring engineered Ni‐O‐V bridge structures as dual‐channel electrocatalysts. The newly constructed Ni‐O‐V bridges confirmed by x‐ray absorption spectroscopy effectively modulate the electronic structures of both Ni and V sites. This synergistic enhancement boosts the performance of both anodic 1,5‐pentanediol electrooxidation to produce glutaric acid (GA) and NO 3 RR to ammonia. The NiV‐LDHs anode enables electrolysis at a low cell voltage of 1.5 V versus RHE, exhibiting a GA Faradaic efficiency of 98.5% and a high GA yield of 2.56 mmol h −1 cm −2 . Operando studies and density functional theory reveal that the strong electronic coupling within NiV‐LDHs optimizes the competitive adsorption between 1,5‐pentanediol and OH* on the catalyst surface. Moreover, the NiV‐LDHs cathode exhibits outstanding NO 3 RR performance, achieving a high ammonia yield of 2.28 mmol h −1 cm −2 with a Faradaic efficiency of 96.1%, surpassing most reported electrocatalysts. A continuous paired electrolysis operation over 240 h successfully produced GA (55.98 g) and NH 4 Cl (23.48 g) powders, demonstrating great potential for industrial application.
- 8 June 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (32) , e5292155
Modulating Ni‐O‐V Bridges in NiV‐Layered Double Hydroxides Microspheres for Robust Electrocatalytic Coupling of 1,5‐Pentanediol Oxidation and Nitrate Reduction
The co‐electrolysis system that couples anodic oxidation of biomass‐derived polyols with cathodic nitrate reduction reaction (NO 3 RR) represents a promising strategy for biomass valorization and treatment of high‐salinity wastewater. Here, we synthesize thin NiV‐layered double hydroxides (NiV‐LDHs) microspheres featuring engineered Ni‐O‐V bridge structures as dual‐channel electrocatalysts. The newly constructed Ni‐O‐V bridges confirmed by x‐ray absorption spectroscopy effectively modulate the electronic structures of both Ni and V sites. This synergistic enhancement boosts the performance of both anodic 1,5‐pentanediol electrooxidation to produce glutaric acid (GA) and NO 3 RR to ammonia. The NiV‐LDHs anode enables electrolysis at a low cell voltage of 1.5 V versus RHE, exhibiting a GA Faradaic efficiency of 98.5% and a high GA yield of 2.56 mmol h −1 cm −2 . Operando studies and density functional theory reveal that the strong electronic coupling within NiV‐LDHs optimizes the competitive adsorption between 1,5‐pentanediol and OH* on the catalyst surface. Moreover, the NiV‐LDHs cathode exhibits outstanding NO 3 RR performance, achieving a high ammonia yield of 2.28 mmol h −1 cm −2 with a Faradaic efficiency of 96.1%, surpassing most reported electrocatalysts. A continuous paired electrolysis operation over 240 h successfully produced GA (55.98 g) and NH 4 Cl (23.48 g) powders, demonstrating great potential for industrial application.
- 8 June 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (32) , e5292155
Modulating Ni‐O‐V Bridges in NiV‐Layered Double Hydroxides Microspheres for Robust Electrocatalytic Coupling of 1,5‐Pentanediol Oxidation and Nitrate Reduction
The co‐electrolysis system that couples anodic oxidation of biomass‐derived polyols with cathodic nitrate reduction reaction (NO 3 RR) represents a promising strategy for biomass valorization and treatment of high‐salinity wastewater. Here, we synthesize thin NiV‐layered double hydroxides (NiV‐LDHs) microspheres featuring engineered Ni‐O‐V bridge structures as dual‐channel electrocatalysts. The newly constructed Ni‐O‐V bridges confirmed by x‐ray absorption spectroscopy effectively modulate the electronic structures of both Ni and V sites. This synergistic enhancement boosts the performance of both anodic 1,5‐pentanediol electrooxidation to produce glutaric acid (GA) and NO 3 RR to ammonia. The NiV‐LDHs anode enables electrolysis at a low cell voltage of 1.5 V versus RHE, exhibiting a GA Faradaic efficiency of 98.5% and a high GA yield of 2.56 mmol h −1 cm −2 . Operando studies and density functional theory reveal that the strong electronic coupling within NiV‐LDHs optimizes the competitive adsorption between 1,5‐pentanediol and OH* on the catalyst surface. Moreover, the NiV‐LDHs cathode exhibits outstanding NO 3 RR performance, achieving a high ammonia yield of 2.28 mmol h −1 cm −2 with a Faradaic efficiency of 96.1%, surpassing most reported electrocatalysts. A continuous paired electrolysis operation over 240 h successfully produced GA (55.98 g) and NH 4 Cl (23.48 g) powders, demonstrating great potential for industrial application.
- Open Access
- 25 May 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (30)
Matching the Coupling of Valence Electrons in the Oxide Interface to Perturb the Magnetic Order Enhancing Oxygen Reduction in Zinc–Air Batteries
The inherently locked spin state between the metal sites and oxygen‐containing intermediates imposes an intrinsic limitation on the maximum achievable oxygen reduction reaction (ORR) activity. Herein, we construct the sub‐5 nm Fe 2 O 3 /Sm 2 O 3 heterojunctions immobilized in N‐doped carbon nanofibers (denoted as sub‐5 nm Fe 2 O 3 /Sm 2 O 3 @N‐CNFs), where coupled Fe (3d)‐O (2p)‐Sm (4f) orbitals can regulate the interfacial spin order, thereby attenuating the Fe–OH binding. Operando spectroscopy and density functional theory calculations reveal that the super‐exchange interaction across the Fe–O–Sm bond induces an antiparallel magnetic alignment, which suppresses the spin interaction with OH* at the surface, thereby accelerating OH* desorption and enhancing ORR activity. In 0.1 M KOH, the catalyst delivers excellent ORR performance with a half‐wave potential of 0.94 V and a Tafel slope of 92.4 mV dec −1 , along with long‐term stability. Furthermore, the liquid‐ and all‐solid‐state rechargeable zinc–air batteries (ZABs) assembled with sub‐5 nm Fe 2 O 3 /Sm 2 O 3 @N‐CNFs also exhibit marked device performance, surpassing Pt/C + RuO 2 benchmarks. These results demonstrate that interfacial spin regulation via Fe–O–Sm coupling is an effective strategy to enhance ORR activity and stability of catalysts by reconfiguring local magnetic ordering to tune oxygenated‐intermediate adsorption. More broadly, this intrinsic‐property modulation can be extended to other anion‐bridged compounds and spin‐involved electrocatalytic reactions.
- 25 May 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (30)
Open AccessMatching the Coupling of Valence Electrons in the Oxide Interface to Perturb the Magnetic Order Enhancing Oxygen Reduction in Zinc–Air Batteries
The inherently locked spin state between the metal sites and oxygen‐containing intermediates imposes an intrinsic limitation on the maximum achievable oxygen reduction reaction (ORR) activity. Herein, we construct the sub‐5 nm Fe 2 O 3 /Sm 2 O 3 heterojunctions immobilized in N‐doped carbon nanofibers (denoted as sub‐5 nm Fe 2 O 3 /Sm 2 O 3 @N‐CNFs), where coupled Fe (3d)‐O (2p)‐Sm (4f) orbitals can regulate the interfacial spin order, thereby attenuating the Fe–OH binding. Operando spectroscopy and density functional theory calculations reveal that the super‐exchange interaction across the Fe–O–Sm bond induces an antiparallel magnetic alignment, which suppresses the spin interaction with OH* at the surface, thereby accelerating OH* desorption and enhancing ORR activity. In 0.1 M KOH, the catalyst delivers excellent ORR performance with a half‐wave potential of 0.94 V and a Tafel slope of 92.4 mV dec −1 , along with long‐term stability. Furthermore, the liquid‐ and all‐solid‐state rechargeable zinc–air batteries (ZABs) assembled with sub‐5 nm Fe 2 O 3 /Sm 2 O 3 @N‐CNFs also exhibit marked device performance, surpassing Pt/C + RuO 2 benchmarks. These results demonstrate that interfacial spin regulation via Fe–O–Sm coupling is an effective strategy to enhance ORR activity and stability of catalysts by reconfiguring local magnetic ordering to tune oxygenated‐intermediate adsorption. More broadly, this intrinsic‐property modulation can be extended to other anion‐bridged compounds and spin‐involved electrocatalytic reactions.