HBHamid Reza Bayat

Hamid Reza Bayat

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hamid Reza Bayat has a total of 52 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Predictive residual stress analysis in gear units: an artificial intelligence approach based on finite element data

    by Hamid Reza Bayat, Bilawal Mustaq, Axel Vötterl

    Determining residual stresses is essential for ensuring the safety and longevity of gear components. Traditional methods, such as analytical, numerical, and experimental approaches, are often costly, time-consuming, and sometimes destructive. This study proposes a new method to predict residual stresses in gear units using artificial intelligence based on data from finite element analysis. To achieve this, a commercial finite element tool models the heat treatment and carburization processes, grounded in thermomechanical metallurgical physics. The residual stresses obtained from finite element analysis are then compared to the ones from experiment using deep hole drilling approach. This is followed by a sensitivity analysis. Next, a specific class of gearbox component geometries and the computed stress fields are utilized to train artificial neural networks. The performance of the artificial neural networks approach is compared to that of two different machine learning regression methods. It has been concluded that this technique successfully anticipates residual stresses in components with scaled geometries and similar heat treatment steps, outperforming the two regression models in accuracy and efficiency. Importantly, it achieves this with incomparable, significantly less computation time compared to standard finite element analysis.


  • Modeling of failure at the interface of ductile materials by applying the cohesive discontinuous Galerkin method

    by Hamid Reza Bayat, Ali Rajaei Harandi, Shahed Rezaei, Tim Brepols, Stefanie Reese

    ESAFORM is an association with the mission to stimulate applied and fundamental research in the field of material forming. Its annual conference, the International ESAFORM Conference on Material Forming, is used to achieve one of the main goals of ESAFORM: to spread scientific and technological information related to material forming within academic and industry. The next conference will be held online on 14-16 April 2021.

  • Open Access

    About the influence of neglecting locking effects on the failure behavior at the interface

    by Hamid Reza Bayat, Shahed Rezaei, Ali Rajaei Harandi, Tim Brepols, Stefanie Reese

    In the present work, a novel cohesive discontinuous Galerkin (CDG) method is proposed to model interfacial failure of brittle materials. Before the failure, an incomplete interior penalty Galerkin (IIPG) variant of discontinuous Galerkin (DG) family is applied for the linear elasticity. Once the failure criterion is met, an extrinsic cohesive zone (CZ) model captures the failure behavior of the interface. Through application of the DG method in combination with reduced integration on the boundary terms, the locking problem of the bulk elements is solved as well as a realistic propagation of the crack is obtained. In addition, due to the presence of the DG elements prior to failure, remeshing of the interface during crack propagation is not required for the proposed extrinsic CZ model. Delamination of a composite structure is simulated in a numerical example. Furthermore, the performance of the CDG element formulation in comparison to a conventional intrinsic CZ element is discussed and conclusions are drawn.


  • Open Access

    A Selection of Benchmark Problems in Solid Mechanics and Applied Mathematics

    by Jörg Schröder, Thomas Wick, Stefanie Reese, Peter Wriggers, Ralf Müller, Stefan Kollmannsberger, Markus Kästner, Alexander Schwarz, Maximilian Igelbüscher, Nils Viebahn, et al.

    In this contribution we provide benchmark problems in the field of computational solid mechanics. In detail, we address classical fields as elasticity, incompressibility, material interfaces, thin structures and plasticity at finite deformations. For this we describe explicit setups of the benchmarks and introduce the numerical schemes. For the computations the various participating groups use different (mixed) Galerkin finite element and isogeometric analysis formulations. Some programming codes are available open-source. The output is measured in terms of carefully designed quantities of interest that allow for a comparison of other models, discretizations, and implementations. Furthermore, computational robustness is shown in terms of mesh refinement studies. This paper presents benchmarks, which were developed within the Priority Programme of the German Research Foundation ‘SPP 1748 Reliable Simulation Techniques in Solid Mechanics—Development of Non-Standard Discretisation Methods, Mechanical and Mathematical Analysis’.


  • Open Access

    Locking‐free interface failure modeling by a cohesive discontinuous Galerkin method for matching and nonmatching meshes

    by Hamid Reza Bayat, Shahed Rezaei, Tim Brepols, Stefanie Reese

    Summary: In this work, modeling of brittle failure of the interface for a linear elastic material is presented. The idea is to integrate a novel extrinsic cohesive zone model into the incomplete interior penalty Galerkin variant of the discontinuous Galerkin (DG) method. As a result, the initial stiffness in the prefailure regime is omitted without having to remesh the crack path during the crack propagation. The interface model is used in combination with different discretization techniques, including matching and nonmatching meshes. This is possible due to the DG method's weak continuity constraint. Moreover, the locking problem in the bulk is cured by the application of a reduced Gaussian integration scheme on the boundary terms. The performance of the new cohesive discontinuous Galerkin elements with different integration schemes is compared with one of the standard intrinsic cohesive models. Due to the elimination of locking, crack initiation at the interface can be realistically displayed.


  • Open Access

    Modeling of Forming Limit Bands for Strain-Based Failure-Analysis of Ultra-High-Strength Steels

    by Hamid Reza Bayat, Sayantan Sarkar, Bharath Anantharamaiah, Francesco Italiano, Aleksandar Bach, Shashidharan Tharani, Stephan Wulfinghoff, Stefanie Reese

    Increased passenger safety and emission control are two of the main driving forces in the automotive industry for the development of light weight constructions. For increased strength to weight ratio, ultra-high-strength steels (UHSSs) are used in car body structures. Prediction of failure in such sheet metals is of high significance in the simulation of car crashes to avoid additional costs and fatalities. However, a disadvantage of this class of metals is a pronounced scatter in their material properties due to e.g., the manufacturing processes. In this work, a robust numerical model is developed in order to take the scatter into account in the prediction of the failure in manganese boron steel (22MnB5). To this end, the underlying material properties which determine the shapes of forming limit curves (FLCs) are obtained from experiments. A modified Marciniak–Kuczynski model is applied to determine the failure limits. By using a statistical approach, the material scatter is quantified in terms of two limiting hardening relations. Finally, the numerical solution obtained from simulations is verified experimentally. By generation of the so called forming limit bands (FLBs), the dispersion of limit strains is captured within the bounds of forming limits instead of a single FLC. In this way, the FLBs separate the whole region into safe, necking and failed zones.


  • Numerical evaluation of discontinuous and nonconforming finite element methods in nonlinear solid mechanics

    by Hamid Reza Bayat, Julian Krämer, Linus Wunderlich, Stephan Wulfinghoff, Stefanie Reese, Barbara Wohlmuth, Christian Wieners


  • Generation of forming limit bands for ultra-high-strength steels in car body structures

    by Hamid Reza Bayat, Sayantan Sarkar, Francesco Italiano, Aleksandar Bach, Stephan Wulfinghoff, Stefanie Reese

    The application of ultra-high-strength steels in safety-related automotive components has led to higher safety levels as well as weight reduction. Nevertheless, this class of advanced high-strength steels (AHSS) show material scatter due to its manufacturing processes. To address this problem in advance, it is of significance not only to model the failure of the sheet metal but also to specify a band for the necking regime. The former is described by a forming limit curve (FLC), whereas a forming limit band (FLB) introduces the upper and lower bounds for the permissible strains. The objective of the present work is to generate a robust prediction of the strain-based failure of the sheet metal during a car crash. The FLCs are generated numerically applying a modified Marciniak-Kuczynski (MK) model, where the existence of an angled groove is mandatory. This assures to obtain the maximum admissible strain. In addition, a zero extension angle is utilized for the left hand side of the FLC (tension-compression). The material scatter is captured in experiments and applied in the hardening relations. Necking strains are recorded experimentally by a digital image correlation based system (ARAMIS). Later, they are fit into the FLC based on an inhomogeneity parameter fi from the MK model. In order to generate a theoretical FLB, first a statistical approach is exploited to take the experimental data into consideration. Eventually, the forming limit band distinguishes between safe, necking and failed regions.

  • Discontinuous Galerkin (DG) method in 3D linear elasticity with application in problems with locking

    by Hamid Reza Bayat, Steffen Kastian, Stephan Wulfinghoff, Stefanie Reese

    In the present work, a three‐dimensional discontinuous Galerkin (DG) formulation is presented and investigated for linear elastic problems, with special emphasis on locking phenomena. Among different variations of DG methods, the incomplete interior penalty Galerkin (IIPG) method is applied here, where the symmetry term is absent and the approach is stable through the application of a penalty term. Different examples are calculated to investigate the locking behavior of the DG method compared to continuous Galerkin (CG) method. Additionally, A locking‐free 3D element formulation based on reduced integration and hourglass stabilization (Q1SP) is applied to compare and evaluate the results of the DG formulation in both shear and volumetric locking‐dominated problems. Due to the discontinuity of the DG elements, a new meshing approach is applied in the finite element analysis program FEAP.