Graziella Roselli
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Graziella Roselli has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
- Carlo Santulli
School of Science and Technology, Università di Camerino
4 shared publications - Daniele Mirabile Gattia
Department of Sustainability, Circularity, and Climate Change Adaptation of Production and Territorial Systems (SSPT), Research Centre of Casaccia, Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA), Via Anguillarese 301, 00123 Rome, Italy
2 shared publications - Fabrizio Scognamiglio
Technologies and Diagnostics for Conservation and Restoration Laboratory, School of Science and Technology, University of Camerino, Via Pacifici Mazzoni 2, 63100 Ascoli Piceno, Italy
2 shared publications - Franca Persia
Department of Sustainability SSPT-ENEA—Casaccia Research Center, Via Anguillarese 301, 00123 Rome, Italy
2 shared publications - Giuseppe Di Girolami2 shared publications
Paolo Cinaglia
2 shared publications
Latest Publications
- Open Access
Use and Roles of Tannins in Polysaccharide-Based Bioplastics and Biocomposites
Most bioplastics are based on polysaccharides, which are either synthesized from a variously sourced monomer or extracted from some biomass waste. In many cases, some lignocellulosic fibers are then added to the obtained bioplastics to form biocomposites and extend their range of applications beyond packaging films and generically easily biodegradable materials. Plant-extracted tannins, which, as such, might also be building blocks for bioplastics, do nonetheless represent a useful complement in their production when added to polysaccharide-based plastics and biocomposites, since they offer other functions, such as bioadhesion, coloration, and biocidal effect. The variety of species used for tannin extraction and condensation is becoming very wide and is also connected with the local availability of amounts of bio-waste from other productions, such as from the food system. This work tries to summarize the evolution and recent developments in tannin extraction and their increasing centrality in the production of polysaccharide-based plastics, adhesives, and natural fiber composites.
Open AccessUse and Roles of Tannins in Polysaccharide-Based Bioplastics and Biocomposites
Most bioplastics are based on polysaccharides, which are either synthesized from a variously sourced monomer or extracted from some biomass waste. In many cases, some lignocellulosic fibers are then added to the obtained bioplastics to form biocomposites and extend their range of applications beyond packaging films and generically easily biodegradable materials. Plant-extracted tannins, which, as such, might also be building blocks for bioplastics, do nonetheless represent a useful complement in their production when added to polysaccharide-based plastics and biocomposites, since they offer other functions, such as bioadhesion, coloration, and biocidal effect. The variety of species used for tannin extraction and condensation is becoming very wide and is also connected with the local availability of amounts of bio-waste from other productions, such as from the food system. This work tries to summarize the evolution and recent developments in tannin extraction and their increasing centrality in the production of polysaccharide-based plastics, adhesives, and natural fiber composites.
- Open Access
- 30 September 2024
- Published by Valahia University of Targoviste - Journal of Science and Arts in Journal of Science and Arts
- Vol. 24 (3) , 645-662
ELEMENTAL ANALYSIS BY XRF OF COLOR SAMPLES USED BY GIORGIO DE CHIRICO SAMPLED IN THE MASTER'S ATELIER AT THE HOUSE MUSEUM LOCATED IN PIAZZA DI SPAGNA IN ROME
The aim of this paper is to analyze numerous materials utilized by the esteemed artist Giorgio de Chirico underwent analysis. These materials are housed in the House Museum of Piazza di Spagna in Rome, where the painter spent the last thirty years of his life, thanks to the resources provided by the Giorgio and Isa de Chirico Foundation. Besides samples of resins and oils, including both pure and mixed varieties, approximately one hundred samples of tube colors were extracted from various boxes used by de Chirico, which are displayed in the Maestro's Atelier. Concurrently, ten paintings, with nearly 220 analysis points (one for every five years spanning from the 1930s to the 1970s), located within the House Museum, underwent analysis as well. The main objective is to establish a correlation between the tube colors utilized by the Master and the colors present in his paintings, aiming to identify significant markers that could serve as references for questions regarding the authenticity of his works. Additionally, the study conducts an in-depth investigation into the artistic technique of the great master, who was known for his penchant for experimenting with personal formulations in utmost secrecy. Furthermore, this study aims to contribute to the analysis of color degradation on canvas exposed to specific environmental conditions, in contrast to the original color preserved within the tube. The intriguing findings that have emerged need to be further enriched in the future through additional comparative analyses on a broader range of paintings and extended to contemporary painters. This endeavor aims to establish a technical-scientific database of reference for scholars of 20th Century painting.
- 30 September 2024
- Published by Valahia University of Targoviste - Journal of Science and Arts in Journal of Science and Arts
- Vol. 24 (3) , 645-662
Open AccessELEMENTAL ANALYSIS BY XRF OF COLOR SAMPLES USED BY GIORGIO DE CHIRICO SAMPLED IN THE MASTER'S ATELIER AT THE HOUSE MUSEUM LOCATED IN PIAZZA DI SPAGNA IN ROME
The aim of this paper is to analyze numerous materials utilized by the esteemed artist Giorgio de Chirico underwent analysis. These materials are housed in the House Museum of Piazza di Spagna in Rome, where the painter spent the last thirty years of his life, thanks to the resources provided by the Giorgio and Isa de Chirico Foundation. Besides samples of resins and oils, including both pure and mixed varieties, approximately one hundred samples of tube colors were extracted from various boxes used by de Chirico, which are displayed in the Maestro's Atelier. Concurrently, ten paintings, with nearly 220 analysis points (one for every five years spanning from the 1930s to the 1970s), located within the House Museum, underwent analysis as well. The main objective is to establish a correlation between the tube colors utilized by the Master and the colors present in his paintings, aiming to identify significant markers that could serve as references for questions regarding the authenticity of his works. Additionally, the study conducts an in-depth investigation into the artistic technique of the great master, who was known for his penchant for experimenting with personal formulations in utmost secrecy. Furthermore, this study aims to contribute to the analysis of color degradation on canvas exposed to specific environmental conditions, in contrast to the original color preserved within the tube. The intriguing findings that have emerged need to be further enriched in the future through additional comparative analyses on a broader range of paintings and extended to contemporary painters. This endeavor aims to establish a technical-scientific database of reference for scholars of 20th Century painting.
- 15 January 2024
- Published by Elsevier in Journal of Cultural Heritage
- Vol. 66, 476-482
The detection of incamottatura through radiography: investigations on real cases and panel painting mock-ups
- 15 January 2024
- Published by Elsevier in Journal of Cultural Heritage
- Vol. 66, 476-482
The detection of incamottatura through radiography: investigations on real cases and panel painting mock-ups
- Open Access
The Use of a Natural Polysaccharide as a Solidifying Agent and Color-Fixing Agent on Modern Paper and Historical Materials
This article presents results on the use of a new material as a solidifying agent and/or color-fixing agent. A special polysaccharide material extracted from the prickly pear cactus (Opuntia ficus indica) was tested on historical materials and modern papers. An old book from the 18th century was chosen as historical material. From the mentioned book 42 pages were taken, on which a conservation and restoration pretreatment was performed before applying the polysaccharide material: sampling, fiber analysis, dry cleaning, ink solubility, pH test, thickness measurement and wet cleaning. The paper sheets provided for the test were divided into 4 groups, 3 of which were treated with gel and one left untreated as a reference. The division into groups is not only due to the different method of application, but also due to the process of gel extraction. The effect of the treatment was analyzed using FTIR-ATR. To test the mucilage as color-fixing agent 2 samples were prepared using watercolor papers colored with 6 different watercolors applied to 2.5 cm2 samples for each color in two rows of different intensity. One of the 2 samples was treated with gel, but both were immersed for 3 times in a water-ethanol solution for approximately 20 min as is standard practice in conservation and restoration. After washing, both specimens were subjected to colorimetric analysis to assess their differences. The results provided satisfactory evidence for the protection of paints sensitive to aqueous treatments and suggest the use of mucilage as a new material in cleaning method for water-soluble media.
Open AccessThe Use of a Natural Polysaccharide as a Solidifying Agent and Color-Fixing Agent on Modern Paper and Historical Materials
This article presents results on the use of a new material as a solidifying agent and/or color-fixing agent. A special polysaccharide material extracted from the prickly pear cactus (Opuntia ficus indica) was tested on historical materials and modern papers. An old book from the 18th century was chosen as historical material. From the mentioned book 42 pages were taken, on which a conservation and restoration pretreatment was performed before applying the polysaccharide material: sampling, fiber analysis, dry cleaning, ink solubility, pH test, thickness measurement and wet cleaning. The paper sheets provided for the test were divided into 4 groups, 3 of which were treated with gel and one left untreated as a reference. The division into groups is not only due to the different method of application, but also due to the process of gel extraction. The effect of the treatment was analyzed using FTIR-ATR. To test the mucilage as color-fixing agent 2 samples were prepared using watercolor papers colored with 6 different watercolors applied to 2.5 cm2 samples for each color in two rows of different intensity. One of the 2 samples was treated with gel, but both were immersed for 3 times in a water-ethanol solution for approximately 20 min as is standard practice in conservation and restoration. After washing, both specimens were subjected to colorimetric analysis to assess their differences. The results provided satisfactory evidence for the protection of paints sensitive to aqueous treatments and suggest the use of mucilage as a new material in cleaning method for water-soluble media.
- 1 November 2021
- Published by Elsevier in Journal of Cultural Heritage
- Vol. 52, 202-214
Chemical, morphological and mechanical study of the ageing of textile flax fibers from 17th/18th-century paintings on canvas
- 1 November 2021
- Published by Elsevier in Journal of Cultural Heritage
- Vol. 52, 202-214
Chemical, morphological and mechanical study of the ageing of textile flax fibers from 17th/18th-century paintings on canvas
- Open Access
- 23 May 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (11) , 4788
Defining a Non-Destructive In Situ Approach for the Determination of Historical Mortar Strength Using the Equotip Hardness Tester
The determination of mechanical parameters of historical mortars is a crucial aspect in the analysis of masonry in ancient buildings, especially for evaluating their quality and planning the appropriate restoration interventions. Due to conservation reasons, creating a comprehensive database is generally not possible because cutting out masonry specimens relates to damaging historical structures. This study starts with the need to characterize the mortar quality of different buildings in the town of Camerino (Central Italy) which has been strongly damaged by the 2016–2017 seismic sequence. A non-destructive collecting data strategy based on the use of the Equotip hardness tester (EQ) has been set up by evaluating the most appropriates impact strategy (single or repeated) and the range of measurements to calculate the basic statistics. The seismic damage suffered by the buildings allowed the rare opportunity to take samples from several walls and carry out laboratory tests to determine their Uniaxial Compressive Strength (UCS). The comparison between the results of the two types of tests made it possible to calibrate a relationship between the EQ values and the UCS. The Pearson’s coefficient of determination derived from an exponential interpolation (R2 = 0.81) confirmed a strong relationship between the EQ values derived from the tests on the specimens and the UCS. Moreover, comparing the in situ EQ measurements with the ones performed on the specimens prepared for the compressive tests, a general underestimation of the in situ EQ values has been observed, possibly due to the presence of a superficial alteration layer of the exposed mortar. From these results, we propose a correction of the in situ measurements able to obtain a more appropriate strength estimate of the historical mortars.
- 23 May 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (11) , 4788
Open AccessDefining a Non-Destructive In Situ Approach for the Determination of Historical Mortar Strength Using the Equotip Hardness Tester
The determination of mechanical parameters of historical mortars is a crucial aspect in the analysis of masonry in ancient buildings, especially for evaluating their quality and planning the appropriate restoration interventions. Due to conservation reasons, creating a comprehensive database is generally not possible because cutting out masonry specimens relates to damaging historical structures. This study starts with the need to characterize the mortar quality of different buildings in the town of Camerino (Central Italy) which has been strongly damaged by the 2016–2017 seismic sequence. A non-destructive collecting data strategy based on the use of the Equotip hardness tester (EQ) has been set up by evaluating the most appropriates impact strategy (single or repeated) and the range of measurements to calculate the basic statistics. The seismic damage suffered by the buildings allowed the rare opportunity to take samples from several walls and carry out laboratory tests to determine their Uniaxial Compressive Strength (UCS). The comparison between the results of the two types of tests made it possible to calibrate a relationship between the EQ values and the UCS. The Pearson’s coefficient of determination derived from an exponential interpolation (R2 = 0.81) confirmed a strong relationship between the EQ values derived from the tests on the specimens and the UCS. Moreover, comparing the in situ EQ measurements with the ones performed on the specimens prepared for the compressive tests, a general underestimation of the in situ EQ values has been observed, possibly due to the presence of a superficial alteration layer of the exposed mortar. From these results, we propose a correction of the in situ measurements able to obtain a more appropriate strength estimate of the historical mortars.
- Open Access
Thermoplastic Starch (TPS) Films Added with Mucilage from Opuntia Ficus Indica: Mechanical, Microstructural and Thermal Characterization
Opuntia cladodes are a typical vegetable waste, from which mucilage in gel form can be extracted. This work proposes blending it with a self-produced thermoplastic starch (TPS), originating from potato starch with a high content in glycerol (ca. 30%). Three methods were compared for extraction, bare maceration (MA), mechanical blending (ME) and mechanical blending following maceration (MPM) to produce films with an approximate thickness of 150 μm. For the comparison, tensile testing, differential scanning calorimetry and scanning electron microscopy were used. The MPM process proved the most effective, not only for extraction yielding, but also to obtain a larger deformation of the samples with respect to the one allowed by the pure TPS films. A considerable plasticization effect was observed. Despite this, the mechanical performance is still not completely satisfactory, and the expected effect of the calcium and magnesium salts contained in the mucilage to improve the rigidity of the TPS film was not really revealed. Prospected improvements would concern the fabrication process and the investigation of other possible loading modes and sample geometries.
Open AccessThermoplastic Starch (TPS) Films Added with Mucilage from Opuntia Ficus Indica: Mechanical, Microstructural and Thermal Characterization
Opuntia cladodes are a typical vegetable waste, from which mucilage in gel form can be extracted. This work proposes blending it with a self-produced thermoplastic starch (TPS), originating from potato starch with a high content in glycerol (ca. 30%). Three methods were compared for extraction, bare maceration (MA), mechanical blending (ME) and mechanical blending following maceration (MPM) to produce films with an approximate thickness of 150 μm. For the comparison, tensile testing, differential scanning calorimetry and scanning electron microscopy were used. The MPM process proved the most effective, not only for extraction yielding, but also to obtain a larger deformation of the samples with respect to the one allowed by the pure TPS films. A considerable plasticization effect was observed. Despite this, the mechanical performance is still not completely satisfactory, and the expected effect of the calcium and magnesium salts contained in the mucilage to improve the rigidity of the TPS film was not really revealed. Prospected improvements would concern the fabrication process and the investigation of other possible loading modes and sample geometries.
- Open Access
Thermoplastic Starch Films Added with Dry Nopal (Opuntia Ficus Indica) Fibers
Dry fibers coming from garden waste, originating from Opuntia ficus indica, were introduced in amounts of either 8 or 16 wt % into a self-produced thermoplastic starch (TPS) based on potato starch and glycerol. Thermal (differential scanning calorimetry, DSC), mechanical (tensile tests), and morphological characterization with scanning electron microscopy (SEM) and performing energy-dispersive X-ray spectrometry (microanalysis) were carried out. The results indicated that the uneven distribution and variable geometry of fibers introduced led to a reduction of tensile stress and strain with respect to pure TPS. However, the positive effects of prolonged mixing and increased thickness were highlighted, which suggest the fabrication of the composite could be improved in the future by controlling the manufacturing procedure.
Open AccessThermoplastic Starch Films Added with Dry Nopal (Opuntia Ficus Indica) Fibers
Dry fibers coming from garden waste, originating from Opuntia ficus indica, were introduced in amounts of either 8 or 16 wt % into a self-produced thermoplastic starch (TPS) based on potato starch and glycerol. Thermal (differential scanning calorimetry, DSC), mechanical (tensile tests), and morphological characterization with scanning electron microscopy (SEM) and performing energy-dispersive X-ray spectrometry (microanalysis) were carried out. The results indicated that the uneven distribution and variable geometry of fibers introduced led to a reduction of tensile stress and strain with respect to pure TPS. However, the positive effects of prolonged mixing and increased thickness were highlighted, which suggest the fabrication of the composite could be improved in the future by controlling the manufacturing procedure.
- 31 October 2019
- Published by Springer Nature in The European Physical Journal Plus
- Vol. 134 (10) , 540
Mortar analysis of historic buildings damaged by recent earthquakes in Italy
- 31 October 2019
- Published by Springer Nature in The European Physical Journal Plus
- Vol. 134 (10) , 540
Mortar analysis of historic buildings damaged by recent earthquakes in Italy