Kazuro Kikuchi
Research Subjects
Research Interests
Kazuro Kikuchi has a total of 269 co-authors. Here are the top co-authors by number of shared publications:
- Sze Yun Set
The University of Tokyo
33 shared publications Y. Takushima
Research Center for Advanced Science and Technology, University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo, 153-8904, Japan
31 shared publicationsK. Katoh
29 shared publicationsKoji Igarashi
The University of Tokyo, Japan
28 shared publicationsKazuhiro Katoh
The University of Tokyo, Japan
25 shared publicationsN. Sugimoto
Research Center, Asahi Glass Company, Ltd., 1150 Hazawa-cho, Kanagawa-ku, Yokohama 221-8755, Japan
22 shared publications
Latest Publications
- Open Access
- 7 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Analysis of laser-amplifier noise: A review of the method and its application to optical communications
This study summarizes the theory of laser-amplifier noise based on the master equation, the quantum-mechanical Langevin equation, and the rate equation. The three approaches are used differently depending on the application. Laser-amplifier noise in the direct-detection receiver is described by the master equation. Meanwhile, the quantum-mechanical Langevin equation is most effective for analyzing noise appearing in coherent optical communication systems. The rate equation approach provides a clear understanding of the intensity-noise characteristics of laser oscillators, including the amplitude squeezing.
- 7 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessAnalysis of laser-amplifier noise: A review of the method and its application to optical communications
This study summarizes the theory of laser-amplifier noise based on the master equation, the quantum-mechanical Langevin equation, and the rate equation. The three approaches are used differently depending on the application. Laser-amplifier noise in the direct-detection receiver is described by the master equation. Meanwhile, the quantum-mechanical Langevin equation is most effective for analyzing noise appearing in coherent optical communication systems. The rate equation approach provides a clear understanding of the intensity-noise characteristics of laser oscillators, including the amplitude squeezing.
- Open Access
- 24 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Reduction of nonlinear impairments in optical transmission systems for high-order quadrature-amplitude-modulation signals by using phase-conjugated twin waves
Using computer simulations, we analyze the bit-error rate (BER) characteristics of the optical transmission system repeated by erbium-doped fiber amplifiers (EDFAs) and two-mode phase-sensitive optical parametric amplifiers (PSAs), where phase-conjugated (PC) twin waves are co-propagating through the link. We focus on the 256 quadrature-amplitude-modulation (QAM) format, whose transmission characteristics are seriously affected by fiber nonlinearity because the required power is significantly high. Changing the repeater spacing and group-velocity dispersion (GVD) of fibers for transmission in the two-mode PSA-based system, we calculate the BERs as a function of the launched power. When the repeater spacing and GVD value of fibers are properly designed, the two-mode PSA-based system can mitigate nonlinear impairments more effectively than the EDFA-based PC twin system.
- 24 January 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessReduction of nonlinear impairments in optical transmission systems for high-order quadrature-amplitude-modulation signals by using phase-conjugated twin waves
Using computer simulations, we analyze the bit-error rate (BER) characteristics of the optical transmission system repeated by erbium-doped fiber amplifiers (EDFAs) and two-mode phase-sensitive optical parametric amplifiers (PSAs), where phase-conjugated (PC) twin waves are co-propagating through the link. We focus on the 256 quadrature-amplitude-modulation (QAM) format, whose transmission characteristics are seriously affected by fiber nonlinearity because the required power is significantly high. Changing the repeater spacing and group-velocity dispersion (GVD) of fibers for transmission in the two-mode PSA-based system, we calculate the BERs as a function of the launched power. When the repeater spacing and GVD value of fibers are properly designed, the two-mode PSA-based system can mitigate nonlinear impairments more effectively than the EDFA-based PC twin system.
- Open Access
- 29 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Mitigation of nonlinear waveform distortion in high-order QAM optical transmission systems by two-mode phase-sensitive optical parametric amplifiers
Using computer simulations, we analyze the bit-error rate (BER) characteristics of a high-order QAM optical transmission system repeated by two-mode phase-sensitive optical parametric amplifiers (PSAs). In this system, an idler, which is a phase-conjugated twin of a signal, propagate through the link together with the signal. One advantage of this system is that the noise figure of two-mode PSAs used as repeaters can approach 0 dB. The other advantage is that two-mode PSAs cancel out self-phase modulation of the signal at each repeater through the interaction between the transmitted signal and idler. Owing to these advantages, the BER characteristics of 16, 64, and 256QAM signals are significantly improved compared with the system using erbium-doped fiber amplifiers and phase-conjugation twin waves, provided that dispersion-shifted fibers are employed for transmission.
- 29 September 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessMitigation of nonlinear waveform distortion in high-order QAM optical transmission systems by two-mode phase-sensitive optical parametric amplifiers
Using computer simulations, we analyze the bit-error rate (BER) characteristics of a high-order QAM optical transmission system repeated by two-mode phase-sensitive optical parametric amplifiers (PSAs). In this system, an idler, which is a phase-conjugated twin of a signal, propagate through the link together with the signal. One advantage of this system is that the noise figure of two-mode PSAs used as repeaters can approach 0 dB. The other advantage is that two-mode PSAs cancel out self-phase modulation of the signal at each repeater through the interaction between the transmitted signal and idler. Owing to these advantages, the BER characteristics of 16, 64, and 256QAM signals are significantly improved compared with the system using erbium-doped fiber amplifiers and phase-conjugation twin waves, provided that dispersion-shifted fibers are employed for transmission.
- Open Access
- 27 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Theory of noise in optical transmission systems repeated by two-mode phase-sensitive optical parametric amplifiers
We analyze the noise characteristics of an optical transmission system repeated by two-mode phase-sensitive optical parametric amplifiers. In such a system, the non-degenerated signal and idler waves co-propagate through the link, interacting with each other in the optical parametric amplifiers. For the first time, we derive a closed-form expression for the accumulated noise using the quantum-mechanical Langevin-equation approach. The derived noise formula allows calculating the noise figure of the optical-amplifier chain under the influence of the internal loss of the amplifiers and the transmission loss of the link, thereby theoretically demonstrating its low-noise characteristics.
- 27 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in TechRxiv
Open AccessTheory of noise in optical transmission systems repeated by two-mode phase-sensitive optical parametric amplifiers
We analyze the noise characteristics of an optical transmission system repeated by two-mode phase-sensitive optical parametric amplifiers. In such a system, the non-degenerated signal and idler waves co-propagate through the link, interacting with each other in the optical parametric amplifiers. For the first time, we derive a closed-form expression for the accumulated noise using the quantum-mechanical Langevin-equation approach. The derived noise formula allows calculating the noise figure of the optical-amplifier chain under the influence of the internal loss of the amplifiers and the transmission loss of the link, thereby theoretically demonstrating its low-noise characteristics.
- 19 August 2020
- Published by Optica Publishing Group in Optics Express
- Vol. 28 (18) , 26007-26017
Sensitivity analysis of optically preamplified Stokes-vector receivers using analytically derived formulae for bit-error rate
This study analyzes the bit-error-rate characteristics of Stokes-vector modulation–demodulation systems employing optically preamplified receivers. We derive unified analytical formulae for the bit-error rate of binary, quad, and octal modulation formats, in which Stokes vectors are modulated in a binary manner per dimension. The receiver sensitivities estimated from the derived bit-error-rate formulae are examined by analyzing the probability-density function of noise in the Stokes-vector direct-detection receiver. In addition, the bit-error-rate formulae enable a comprehensive comparison of the sensitivity among various optical receivers, such as coherent, direct-detection, optically differential direct-detection, and Stokes-vector direct-detection receivers.
- 19 August 2020
- Published by Optica Publishing Group in Optics Express
- Vol. 28 (18) , 26007-26017
Sensitivity analysis of optically preamplified Stokes-vector receivers using analytically derived formulae for bit-error rate
This study analyzes the bit-error-rate characteristics of Stokes-vector modulation–demodulation systems employing optically preamplified receivers. We derive unified analytical formulae for the bit-error rate of binary, quad, and octal modulation formats, in which Stokes vectors are modulated in a binary manner per dimension. The receiver sensitivities estimated from the derived bit-error-rate formulae are examined by analyzing the probability-density function of noise in the Stokes-vector direct-detection receiver. In addition, the bit-error-rate formulae enable a comprehensive comparison of the sensitivity among various optical receivers, such as coherent, direct-detection, optically differential direct-detection, and Stokes-vector direct-detection receivers.
- Open Access
- 17 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (12) , 3164-3172
Quantum Theory of Noise in Stokes Vector Receivers and Application to Bit Error Rate Analysis
Polarization-modulated optical signals can be demodulated via direct detection of Stokes vectors. In this study, we develop a quantum theory of noise in the Stokes vector receiver. Examining the conditions that enable simultaneous measurement of three elements of the Stokes vector, we demonstrate that an optical pre-amplifier in front of the Stokes vector receiver can reduce the power penalty associated with simultaneous measurements, down to the quantum limit of 3 dB. Then, the 3-dimensional Gaussian noise model for the shot noise and optical pre-amplifier noise is discussed. Subsequently, based on the noise analyses, we derive bit error rate formulae for the cubic-lattice polarization modulation format and evaluate the sensitivity of the Stokes vector receiver.
- 17 January 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 38 (12) , 3164-3172
Open AccessQuantum Theory of Noise in Stokes Vector Receivers and Application to Bit Error Rate Analysis
Polarization-modulated optical signals can be demodulated via direct detection of Stokes vectors. In this study, we develop a quantum theory of noise in the Stokes vector receiver. Examining the conditions that enable simultaneous measurement of three elements of the Stokes vector, we demonstrate that an optical pre-amplifier in front of the Stokes vector receiver can reduce the power penalty associated with simultaneous measurements, down to the quantum limit of 3 dB. Then, the 3-dimensional Gaussian noise model for the shot noise and optical pre-amplifier noise is discussed. Subsequently, based on the noise analyses, we derive bit error rate formulae for the cubic-lattice polarization modulation format and evaluate the sensitivity of the Stokes vector receiver.
- 10 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (2) , 187-194
Decoding of Multilevel Stokes-Vector Modulated Signal by Polarization-Analyzing Circuit on InP
Of-late research on Stokes vector receiver for the short-reach optical communication has gained significant attention due to its capability to decode information in multi-dimension using cost-effective direct-detection technique. Here, we report a compact and robust photonic integrated circuit (PIC) on InP for potentially low-cost direct-detection-based Stokes vector (SV) receiver. It consists of a $1\times4$ multimode interference power splitter with different combination of polarization converters on output arms, so that input SV is projected onto distinct vectors on the Stokes space. By using the fabricated device, we experimentally demonstrate decoding of 2-level and 4-level SV-modulated signals at 3 Gbaud. With the potential of monolithically integrating high-speed InP photodetector array on the same chip, it paves the way to realize compact and low-cost SV receivers for multi-level SV modulation formats in future short-reach optical communication links.- 10 January 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 36 (2) , 187-194
Decoding of Multilevel Stokes-Vector Modulated Signal by Polarization-Analyzing Circuit on InP
Of-late research on Stokes vector receiver for the short-reach optical communication has gained significant attention due to its capability to decode information in multi-dimension using cost-effective direct-detection technique. Here, we report a compact and robust photonic integrated circuit (PIC) on InP for potentially low-cost direct-detection-based Stokes vector (SV) receiver. It consists of a $1\times4$ multimode interference power splitter with different combination of polarization converters on output arms, so that input SV is projected onto distinct vectors on the Stokes space. By using the fabricated device, we experimentally demonstrate decoding of 2-level and 4-level SV-modulated signals at 3 Gbaud. With the potential of monolithically integrating high-speed InP photodetector array on the same chip, it paves the way to realize compact and low-cost SV receivers for multi-level SV modulation formats in future short-reach optical communication links.- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Fast decoding and LLR-computation algorithms for high-order set-partitioned 4D-QAM constellations
We propose digital-signal-processing algorithms that achieve fast decoding and LLR-computation for high-order set-partitioned 4D-QAM formats based on their parity-check functions. Computer-simulation results show that computational complexity of the decoder can significantly be reduced with negligible power penalty using such algorithms.
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Fast decoding and LLR-computation algorithms for high-order set-partitioned 4D-QAM constellations
We propose digital-signal-processing algorithms that achieve fast decoding and LLR-computation for high-order set-partitioned 4D-QAM formats based on their parity-check functions. Computer-simulation results show that computational complexity of the decoder can significantly be reduced with negligible power penalty using such algorithms.
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Clock-recovery and adaptive-equalization characteristics of digital coherent receivers with symbol-rate analog-to-digital conversion
We analyze the performance of digital coherent receivers with symbol-rate analog-to-digital conversion (ADC), aiming at short/medium-reach applications. Efficient dispersion compensation can be done even under the aliasing effect associated with ADC, when the clock is extracted by our proposed method.
- 1 September 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Clock-recovery and adaptive-equalization characteristics of digital coherent receivers with symbol-rate analog-to-digital conversion
We analyze the performance of digital coherent receivers with symbol-rate analog-to-digital conversion (ADC), aiming at short/medium-reach applications. Efficient dispersion compensation can be done even under the aliasing effect associated with ADC, when the clock is extracted by our proposed method.
- Top Cited PapersOpen Access
- 3 August 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 34 (1) , 157-179
Fundamentals of Coherent Optical Fiber Communications
The recently developed digital coherent receiver enables us to employ a variety of spectrally efficient modulation formats such as M-ary phase-shift keying and quadrature-amplitude modulation. Moreover, in the digital domain, we can equalize all linear transmission impairments such as group-velocity dispersion and polarization-mode dispersion of transmission fibers, because coherent detection preserves the phase information of the optical signal. This paper reviews the history of research and development related to coherent optical communications and describes the principle of coherent detection, including its quantum-noise characteristics. In addition, it discusses the role of digital signal processing in mitigating linear transmission impairments, estimating the carrier phase, and tracking the state of polarization of the signal in coherent receivers.
- 3 August 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 34 (1) , 157-179
Top Cited PapersOpen AccessFundamentals of Coherent Optical Fiber Communications
The recently developed digital coherent receiver enables us to employ a variety of spectrally efficient modulation formats such as M-ary phase-shift keying and quadrature-amplitude modulation. Moreover, in the digital domain, we can equalize all linear transmission impairments such as group-velocity dispersion and polarization-mode dispersion of transmission fibers, because coherent detection preserves the phase information of the optical signal. This paper reviews the history of research and development related to coherent optical communications and describes the principle of coherent detection, including its quantum-noise characteristics. In addition, it discusses the role of digital signal processing in mitigating linear transmission impairments, estimating the carrier phase, and tracking the state of polarization of the signal in coherent receivers.