AGAmy E. Galanter

Amy E. Galanter

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Amy E. Galanter has a total of 45 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Water use across the conterminous United States, water years 2010–20

    by Laura Medalie, Amy E. Galanter, Anthony J. Martinez, Althea A. Archer, Carol L. Luukkonen, Melissa A. Harris, Jonathan V. Haynes

    Withdrawals of water for human use are fundamental to the evaluation of the Nation’s water availability. This chapter provides an analysis of public supply, crop irrigation, and thermoelectric power water use for the conterminous United States (CONUS) during water years 2010–20. These three categories account for about 90 percent of water withdrawals in the Nation. The values presented here are based on modeling approaches that estimate water use at temporal (monthly) and spatial scales (12-digit hydrologic unit code—small watersheds sized 50–100 square kilometers) compatible for integration into a broader national assessment of water availability. Models also provide an understanding of factors that influence water use.An estimated 244,817 million gallons per day (Mgal/d; 28,677 million cubic meters per month [Mm3/mo]) were withdrawn on average within the CONUS during water years 2010–20 from fresh water and saline water for crop irrigation, public supply, and thermoelectric power, with shares of 43, 14.5, and 42.5 percent for each of these categories, respectively. In the same period, estimated withdrawals and consumptive use (1) for public supply were 35,400 and 4,219 Mgal/d (4,081 and 486 Mm3/mo), respectively; (2) for crop irrigation were 105,497 and 75,698 Mgal/d (12,147 and 8,716 Mm3/mo), respectively; and (3) for thermoelectric power from fresh water were 82,656 and 2,904 Mgal/d (9,952 and 345 Mm3/mo), respectively.Withdrawals for these categories of water use are highly spatially variable, with western States dominated by crop irrigation and eastern States dominated by thermoelectric-power water use. Public supply accounts for the largest percentage of water use in several heavily populated northeastern States. Reliance on groundwater compared to surface water depends on the availability of water sources and the type of water use. For public supply, withdrawals from groundwater are greater than withdrawals from surface water in the Western aggregated hydrologic regions, whereas the balance shifts to more surface water for the rest of the CONUS. In all aggregated hydrologic regions, the predominant source of water for crop irrigation is groundwater. Most thermoelectric power facilities in the eastern half of the CONUS use surface water from freshwater and saline sources; most thermoelectric power facilities in the western half of the CONUS use groundwater.


  • Open Access

    Water supply in the conterminous United States, Alaska, Hawaii, and Puerto Rico, water years 2010–20

    by Galen Gorski, Edward G. Stets, Martha A. Scholl, James R. Degnan, John R. Mullaney, Amy E. Galanter, Anthony J. Martinez, Julie Padilla, Jacob H. LaFontaine, Hayley R. Corson-Dosch, et al.

    We present an assessment of water supply across the conterminous United States (CONUS), Alaska, Hawaii, and Puerto Rico covering water years 2010–20. Our analysis drew on two national hydrologic models, the National Hydrologic Model Precipitation-Runoff Modeling System and the Weather Research and Forecasting model hydrologic modeling system. Both models produced estimates of streamflow, evapotranspiration, soil moisture, snow water equivalent, and other hydrologic states and fluxes. The models were driven by the bias-adjusted 4-kilometer-resolution, long-term regional hydroclimate simulation over the conterminous United States dataset (CONUS404). We assessed spatial and temporal error distributions by comparing monthly simulations at the 12-digit hydrologic unit code and regional scale from both models against external benchmarking datasets. Results showed that average annual rainfall across the CONUS was 857 millimeters per year for the period of analysis, with water year 2012 the driest year (729 millimeters) and water year 2019 the wettest year (995 millimeters). Key interannual variability results included the following: (1) the California–Nevada hydrologic region had the highest variability in precipitation and snow accumulation, and (2) the Texas hydrologic region was among hydrologic regions with the highest variability in precipitation. We related interannual variability in precipitation to storage volumes in soil moisture, snow water equivalent, and lakes and reservoirs to highlight areas with little storage and large year-to-year variability in precipitation. These areas included the Southern High Plains, Central High Plains, Texas, Souris–Red–Rainy, Mississippi Embayment, and Midwest regions. Our analysis of groundwater-level data showed that several of these areas overlap aquifers where groundwater levels were considerably lower than historical averages, including the Colorado Plateaus aquifers, the Rio Grande aquifer system, and the Central and Southern regions of the High Plains aquifer. Many of these lowered groundwater levels are continuations of decades-long declines from overpumping that started well before the assessment period. The resulting water budgets and their analyses provide a high-resolution foundational assessment of the mean state and variability of the terrestrial hydrologic cycle across the CONUS and Alaska, Hawaii, and Puerto Rico to support a wide range of water resource management applications.


  • Open Access

    Three-dimensional geologic framework model of the Rio San Jose groundwater basin and adjacent areas, New Mexico

    by Donald S. Sweetkind, Amy E. Galanter

    As part of a U.S. Geological Survey study in cooperation with the Bureau of Reclamation and the Pueblo of Acoma, New Mexico, and the Pueblo of Laguna, New Mexico, a digital three-dimensional geologic framework model was constructed for the Rio San Jose and its surface-water drainage basin in west-central New Mexico. This three-dimensional model defines the altitude, thickness, and extent of 18 geologic units for use in a regional numerical hydrologic model. The model included an undifferentiated Proterozoic basement layer, 13 consolidated Paleozoic and Mesozoic rock units, and 4 Cenozoic units. Model input data were compiled from published cross sections, well data, structure contour maps, selected geophysical data, and data derived from geologic maps and structural features in the study area. These data were used to construct faulted surfaces that represent the upper and lower subsurface geologic unit boundaries. The digital three-dimensional geologic framework model combines faults, the altitude of the tops of each geologic unit, and boundary lines depicting the subsurface extent of each geologic unit. The digital three-dimensional geologic model described in this report and the corresponding data release represents the generalized geometry of the subsurface geologic units; it reproduces with reasonable accuracy the input geologic data and is consistent with previously published subsurface conceptualizations of the region. The geologic framework model is at a scale and resolution appropriate for use as the foundation for a numerical hydrologic model of the study area.


  • Open Access

    Development of an integrated hydrologic flow model of the Rio San Jose Basin and surrounding areas, New Mexico

    by Andre B. Ritchie, Shaleene B. Chavarria, Amy E. Galanter, Allison K. Flickinger, Andrew J. Robertson, Donald S. Sweetkind

    The Rio San Jose Integrated Hydrologic Model (RSJIHM) was developed to provide a tool for analyzing the hydrologic system response to historical water use and potential changes in water supplies and demands in the Rio San Jose Basin. The study area encompasses about 6,300 square miles in west-central New Mexico and includes the communities of Grants, Bluewater, and San Rafael and three Native American Tribal lands: the Acoma and Laguna Pueblos and the Navajo Nation. Perennial surface water features are sparse in the study area and most water resources consist of groundwater pumped from sedimentary and basalt aquifers.Calibration of the RSJIHM was performed using PEST++ (version 4.3.20) and BeoPEST (version 13.6). Model parameter values were adjusted during calibration to fit model simulated values to the measured or estimated values for several observation groups: (1) solar radiation, (2) potential evapotranspiration, (3) actual evapotranspiration, (4) precipitation and minimum and maximum air temperature, (5) snow water equivalent, (6) snow-covered area, (7) streamflow, (8) hydraulic head, (9) springflow at Ojo del Gallo, (10) springflow at Horace Springs, (11) surface-water releases from Bluewater Lake, and (12) surface-water diversions for irrigation within the Bluewater-Toltec Irrigation District.The simulated average annual hydrologic budget from 1950 through 2018 indicated that the majority (greater than 98 percent) of precipitation within the basin was consumed by evapotranspiration, leaving 1.2 percent to recharge the groundwater system, 0.47 percent to direct runoff to streams, and 0.20 percent to infiltrate the soil zone and interflow to streams. The average annual recharge to the groundwater system and runoff to streams simulated by the RSJIHM was about 28,000 and 11,000 acre-feet, respectively. The RSJIHM simulated about 590,000 acre-feet of cumulative aquifer storage depletion from 1950 through 2018.Additional work that could improve the simulation capability of the RSJIHM includes (1) further data collection (streamflow, head, springflow) in the southwestern subbasin that includes the El Malpais National Monument, (2) incorporating temporally variable vegetation parameters, (3) spatial downscaling of the hydrometeorological input datasets, (4) incorporating additional spatial variability to hydraulic property parameters on the basis of new data collection, and (5) using environmental tracers to verify and calibrate model parameters.


  • Update and recalibration of the Rio Grande Transboundary Integrated Hydrologic Model, New Mexico and Texas, United States, and northern Chihuahua, Mexico

    by Andre B. Ritchie, Amy E. Galanter, Allison K. Flickinger, Zachary M. Shephard, Ian M. Ferguson

    The Rio Grande Transboundary Integrated Hydrologic Model (RGTIHM) was developed through an interagency effort between the U.S. Geological Survey and the Bureau of Reclamation to provide a tool for analyzing the hydrologic system response to the historical evolution of water use and potential changes in water supplies and demands in the Hatch Valley (also known as Rincon Valley in the study area) and Mesilla Basin, New Mexico and Texas, United States, and northern Chihuahua, Mexico. Reclamation operates the Rio Grande Project (RGP) to store and deliver surface water for irrigation and municipal use within the study area and in the El Paso Valley south of the El Paso Narrows.Biases in the RGTIHM’s simulation of streamflow and aquifer storage depletion and the availability of new estimates of historical agricultural consumptive use in the study area initiated an update and recalibration of the RGTIHM. In addition to the new estimates of historical agricultural consumptive use, updates were made to more accurately represent the natural system and included adjustments to the initial groundwater levels; streamflow rating tables; Rio Grande, canal, and drain streambed elevations; tributary streambed elevations; surface-water inflows and diversions; RGP surface-water deliveries and canal waste; on-farm efficiency; the routing of surface-water runoff within the MODFLOW Farm Process; and general head boundaries used to simulate interbasin groundwater flow. Model settings, including the assignment of hydraulic conductivity and storage properties to model layers and the MODFLOW solver package, were adjusted to improve numerical stability, and the model was recalibrated to better simulate the natural system. The updated and recalibrated RGTIHM demonstrates a robust ability to simulate the spatially and temporally variable measurements, estimates, or reports of hydraulic head, surface-water flows, agricultural pumping, RGP surface-water deliveries and canal waste, and decadal aquifer storage changes, with improvements over the previous version of the model.


  • Estimates of water use associated with continuous oil and gas development in the Permian Basin, Texas and New Mexico, 2010–19, with comparisons to the Williston Basin, North Dakota and Montana

    by Natalie A. Houston, Grady P. Ball, Amy E. Galanter, Joshua F. Valder, Ryan R. McShane, Joanna N. Thamke, Jeremy S. McDowell

    First posted October 27, 2021 Director, Oklahoma-Texas Water Science Center U.S. Geological Survey 1505 Ferguson Lane Austin, TX 78754–4501 Contact Pubs Warehouse The Permian Basin, in west Texas and southeastern New Mexico is one of the largest conventional oil and gas reservoirs in the United States and is becoming one of the world’s largest continuous oil and gas (COG) reservoirs. Advances in technology have enabled oil and gas to be extracted from reservoirs that historically were developed using conventional, or vertical, well drilling techniques. Conventional oil and gas reservoirs have discrete deposits that are well defined and are typically trapped by an overlying geologic formation or caprock, whereas COG reservoirs contain deposits that are distributed evenly throughout the geologic formation, typically have much lower permeability (the capacity of a porous rock to transmit a fluid) than the con­ventional deposits, and require specialized horizontal extraction techniques. The methods to extract the oil from the two different reservoirs require differing amounts of water, and the horizontal extraction methods typically require substantially more water. In 2015, the U.S. Geological Survey started a topical study to quantify water used during COG development. The Permian Basin, which contains both types of reservoirs (continuous and conventional), was the second basin in the United States in the U.S. Geological Survey’s topical study to quantify water used during COG development.


  • Estimates of public-supply, domestic, and irrigation water withdrawal, use, and trends in the Upper Rio Grande Basin, 1985 to 2015

    by Tamara I. Ivahnenko, Allison K. Flickinger, Amy E. Galanter, Kyle R. Douglas-Mankin, Diana E. Pedraza, Gabriel B. Senay

    The Rio Grande flows approximately 670 miles from its headwaters in the San Juan Mountains of south-central Colorado to Fort Quitman, Texas, draining the Upper Rio Grande Basin (URGB) study area of 32,000 square miles that includes parts of Colorado, New Mexico, and Texas. Parts of the basin extend into the United Mexican States (hereafter “Mexico”), where the Rio Grande forms the international boundary between Texas and the State of Chihuahua, Mexico. The URGB was chosen as a focus area study (FAS) for the U.S. Geological Survey (USGS) National Water Census (NWC) as part of the WaterSMART initiative. The objective of the USGS NWC under WaterSMART is to focus on the technical aspects of providing information and tools to stakeholders so that they can make informed decisions on water availability.This report contains water-use withdrawal estimates of groundwater and surface water for public-supply, self-supplied domestic, and irrigation water use for years 1985–2015 at 5-year intervals for the 22 drainage basins at the subbasin 8-digit hydrologic unit code (HUC-8) level. Data for additional categories of self-supplied industrial, mining, livestock, aquaculture, thermoelectric, and hydroelectric water use are provided in the accompanying data release to illustrate total withdrawals for the URGB. The additional category data are provided in this report only for the year 2015. Deliveries of water from public-supply systems to domestic users are included and are the only water-delivery data presented in this report. Consumptive use for irrigation is reported for all HUC-8 subbasins for 2015 and for select HUC-8s in the other years beginning in 1985 (the irrigation category includes irrigation for both crop and golf). Water transported outside of the URGB (interbasin transfers) is not included as part of the withdrawals and are not accounted for in any category of use within the URGB.Estimated total withdrawals for all the water-use categories (including hydroelectric) in 2015 as reported in the USGS compilations in the URGB were 3,152.10 million gallons per day (Mgal/d). Surface water was the dominant source of water used in the URGB, providing about 71 percent of total withdrawals. Nearly all withdrawals were from freshwater sources; there was a small amount of saline groundwater that was used for public supply and self-supplied industrial, which were all reported in Texas. The proportions of total 2015 withdrawals from States in the URGB are 46 percent each in Colorado and New Mexico and 8 percent in Texas. A comparison of 2015 water withdrawals for the URGB—for the categories of public supply, self-supplied domestic, self-supplied industrial, thermoelectric, irrigation, livestock, mining, aquaculture, and hydroelectric—showed that irrigation is the dominant water use, at 74 percent of total withdrawals. Other water-use categories in the URGB that use about 1 percent or greater of the total water use by volume are public supply (9 percent) and self-supplied domestic and aquaculture (each about 1 percent). This report focuses on the higher volume, consumptively used categories of public supply, self-supplied domestic, and irrigation. A discussion on basin population provides context for the categories of public-supply and self-supplied domestic water use.The population in the part of the basin in the United States grew from 1.36 to 2.26 million people between 1985 and 2015. With the city of Ciudad Juarez, Chihuahua, Mexico, included, the total population of the URGB grew from an estimated 2.01 to 3.66 million people between 1985 and 2015. The largest concentrations of population are in New Mexico, Texas, and Chihuahua, with 98 percent of the total number of people in the basin in 1985 and 99 percent of the total in 2015 residing in these states. Albuquerque, El Paso, and Ciudad Juarez are the largest cities in the basin.Total withdrawals for public supply in the URGB averaged 277 Mgal/d from 1985 to 2015. About 60 percent of the URGB total public-supply withdrawals occurred in New Mexico, which averaged 170 Mgal/d. Groundwater provided 92 and 70 percent of the total withdrawals for public supply in 1985 and 2015, respectively. Deliveries to domestic users from public suppliers are reported for all drainage basins and years, and account for part of the total public-supply withdrawals. In the URGB, domestic deliveries from public suppliers increased from 1985 to 1995; since 2005, domestic deliveries from public supply have declined. The total populations served by public suppliers in the URGB increased by 90 percent from 1985 to 2015. In the URGB, more people were served by public-supply systems than were self-supplied, and the percentage of people on public-supply systems ranged from 81 to 92 percent from 1985 to 2015. Total domestic withdrawals in the URGB (deliveries plus self-supply withdrawals) ranged from 177.49 to 234.83 Mgal/d and peaked in 2005. Domestic use decreased from 2005 to 2010 by 17 percent and remained less than 200 Mgal/d in 2015. The per-capita daily use for the entire URGB fluctuated between the reporting years, but overall, domestic per-capita use across the basin has declined 46 percent from 145 gallons per capita daily (gpcd) in 1985 to 79 gpcd in 2015.Total irrigation withdrawals in the URGB had a mean value of 2,767.66 Mgal/d from 1985 to 2015 and withdrawals peaked in 1995 at 3,416.84 Mgal/d. Over the 30-year period, irrigation source water in the URGB has ranged from 69 to 84 percent surface water, and the most surface water diverted in the basin for irrigation was in 1995. Groundwater withdrawals for irrigation have fluctuated but overall decreased by 13 percent between 2005 and 2015. Slightly more than one-half of total irrigation withdrawals within the URGB occurred in Colorado, with a mean of 57 percent from 1985 to 2015. From the peak of water withdrawals in 1995 to the conclusion of this study in 2015, total irrigation...


  • Estimates of water use associated with continuous oil and gas development in the Permian Basin, Texas and New Mexico, 2010–19

    by Joshua F. Valder, Ryan R. McShane, Joanna N. Thamke, Jeremy S. McDowell, Grady P. Ball, Natalie A. Houston, Amy E. Galanter

    In 2015, the U.S. Geological Survey started a topical study to quantify water use in areas of continuous oil and gas (COG) development. The first phase of the study was completed in 2019 and analyzed the Williston Basin. The second phase of the study analyzed the Permian Basin using the same techniques and approaches used for the Williston Basin analysis. The Permian Basin was selected for the second phase of water-use analysis for the following reasons: (1) the basin has the largest undiscovered technically recoverable oil and gas resource in the United States, (2) the basin has a continuous resource in tight shale that primarily produces oil, and (3) the basin is within the contiguous United States. This study used data from 60 counties in Texas and New Mexico with spatial coverage based on the Permian Basin extent defined by the U.S. Energy Information Administration, a representation of the geologically defined Permian Basin.Data from several sources were used in the analysis of direct, indirect, and ancillary water use associated with COG development in the Permian Basin and are available in an associated data release. Hydraulic fracturing water-use data were used to determine the start of the recent (before 2019) COG development boom in oil production in the Permian Basin in the same way that the data were used for the Williston Basin study. Water-use data were aggregated by county and year, which were the sampling units used in the analysis.The water-use analysis of the Permian Basin contained three elements: (1) estimates of water use, in million gallons, by county and year; (2) coefficients of water use from regression models, in million gallons per developed oil and gas well; and (3) performance (based on goodness-of-fit metrics) of the regression models in estimating the observed water use.Coefficients from the linear and quantile regression models of direct, indirect, and ancillary water use in the Permian Basin were produced as aggregate values for the counties and years. The mean estimate of direct water use had a 95-percent confidence interval of 4.13–5.45 million gallons (Mgal) per developed oil and gas well. The coefficient from the linear regression model of indirect water use was 0.111 Mgal per well, with a 95-percent confidence interval of 0.104–0.117 Mgal per well. The mean estimate of ancillary water use in the Permian Basin was 1.09 Mgal per well, with a 95-percent confidence interval of 1.05–1.13 Mgal per well. Model performance was evaluated with goodness-of-fit metrics including coefficient of determination (R2), root mean square error, and the ratio of root mean square error to standard deviation of observations computed from leave-one-out cross validation of the linear and quantile regression models of direct, indirect, and ancillary water use. Model performance for direct water use was acceptable, with an R2 value of 0.91. The model performance of indirect water use was acceptable, with an R2 value of 0.89. Values of R2 for the ancillary water-use categories were at least 0.89.Annual mean estimates for hydraulic fracturing, cementing, drilling, indirect, and ancillary water use per well for the years 2010–17 were comparable between the Permian and Williston Basins. Hydraulic fracturing water use increased similarly from 2010 to 2015 in the Permian Basin and the Williston Basin, increasing from 0.6 Mgal per well in 2010 to 5.4 Mgal per well in 2015 in the Permian Basin and from 1.4 Mgal per well in 2010 to 4.7 Mgal per well in 2015 in the Williston Basin.By design, the Permian water-use assessment is a simplification of a complex and continually developing system and therefore has uncertainty and limitations in the interpretation of results. Despite the modeling limitations, the results summarized in the report, when compared to other studies, compare well with water-use estimations. The favorable comparison highlights the transferability of the water-use methodology to other areas of COG development.


  • Open Access

    Rio Grande transboundary integrated hydrologic model and water-availability analysis, New Mexico and Texas, United States, and northern Chihuahua, Mexico

    by Randall T. Hanson, Andre B. Ritchie, Scott E. Boyce, Amy E. Galanter, Ian A. Ferguson, Lorraine E. Flint, Alan L. Flint, Wesley R. Henson

    Changes in population, agricultural development and practices (including shifts to more water-intensive crops), and climate variability are increasing demands on available water resources, particularly groundwater, in one of the most productive agricultural regions in the Southwest—the Rincon and Mesilla Valley parts of Rio Grande Valley, Doña Ana and Sierra Counties, New Mexico, and El Paso County, Texas. The goal of this study was to produce an integrated hydrological simulation model to help evaluate water-management strategies, including conjunctive use of surface water and groundwater for historical conditions, and to support long-term planning for the Rio Grande Project. This report describes model construction and applications by the U.S. Geological Survey, working in cooperation and collaboration with the Bureau of Reclamation.This model, the Rio Grande Transboundary Integrated Hydrologic Model, simulates the most important natural and human components of the hydrologic system, including selected components related to variations in climate, thereby providing a reliable assessment of surface-water and groundwater conditions and processes that can inform water users and help improve planning for future conditions and sustained operations of the Rio Grande Project (RGP) by the Bureau of Reclamation. Model development included a revision of the conceptual model of the flow system, construction of a Transboundary Rio Grande Watershed Model (TRGWM) water-balance model using the Basin Characterization Model, and construction of an integrated hydrologic flow model with MODFLOW-One-Water Hydrologic Flow Model version 2 (referred to as MF-OWHM2). The hydrologic models were developed for and calibrated to historical conditions of water and land use, and parameters were adjusted so that simulated values closely matched available measurements (calibration). The calibrated model was then used to assess the use and movement of water in the Rincon Valley, Mesilla Basin, and northern part of the Conejos-Médanos Basin, with the entire region referred to as the “Transboundary Rio Grande” or TRG. These tools provide a means to understand hydrologic system response to the evolution of water use in the region, its availability, and potential operational constraints of the RGP.The conceptual model identified surface-water and groundwater inflows and outflows that included the movement and use of water both in natural and in anthropogenic systems. The groundwater-flow system is characterized by a layered geologic sedimentary sequence combined with the effects of groundwater pumping, operation of the RGP, natural runoff and recharge, and the application of irrigation water at the land surface that is captured and reused in an extensive network of canals and drains as part of the conjunctive use of water in the region.Historical groundwater-level fluctuations followed a cyclic pattern that were aligned with climate cycles, which collectively resulted in alternating periods of wet or dry years. Periods of drought that persisted for one or more years are associated with low surface-water availability that resulted in higher rates of groundwater-level decline. Rates of groundwater-level decline also increased during periods of agricultural intensification, which necessitated increasing use of groundwater as a source of irrigation water. Agriculture in the area was initially dominated by alfalfa and cotton, but since 1970 more water-intensive pecan orchards and vegetable production have become more common. Groundwater levels substantially declined in subregions where drier climate combined with increased demand, resulting in periods of reduced streamflows.Most of the groundwater was recharged in the Rio Grande Valley floor, and most of the pumpage and aquifer storage depletion was in Mesilla Basin agricultural subregions. A cyclic imbalance between inflows and outflows resulted in the modeled cyclic depletion (groundwater withdrawals in excess of natural recharge) of the groundwater basin during the 75-year simulation period of 1940–2014. Changes in groundwater storage can vary considerably from year to year, depending on land use, pumpage, and climate conditions. Climatic drivers of wet and dry years can greatly affect all inflows, outflows, and water use. Although streamflow and, to a minor extent, precipitation during inter-decadal wet-year periods replenished the groundwater historically, contemporary water use and storage depletion could have reduced the effects of these major recharge events. The average net groundwater flow-rate deficit for 1953–2014 was estimated to be about 1,090 acre-feet per year.


  • Anderson Ranch wetlands hydrologic characterization in Taos County, New Mexico

    by Amy E. Galanter, Zachary M. Shephard, Pamela Herrera-Olivas

    The Anderson Ranch property (study area), located in Taos County, north-central New Mexico, was transferred from Chevron Mining, Inc. (CMI) to the Bureau of Land Management (BLM) as part of a Natural Resource Damage Assessment and Restoration (NRDAR) court-ordered settlement. The study area supports freshwater emergent wetlands and freshwater ponds. The settlement states that CMI will provide the land and a monetary settlement to support the restoration of the wetlands on the property. To best manage the study area, the BLM requires an understanding of potential effects of climate variability and groundwater withdrawals on the wetland function. This study, completed by the U.S. Geological Survey in cooperation with the BLM, provides an initial hydrologic characterization of the study area, which included literature review, collection of groundwater-level and aqueous-chemistry data, completion of a vegetation survey, and preliminary data analysis. The data compiled, collected, and analyzed as part of this study indicate that the wetlands within the study area are groundwater fed and that the water maintaining the wetlands is modern. Surface-water levels in the pond and groundwater levels in the surrounding wetland fluctuate seasonally. The hydraulic gradient in the study area is from northeast to southwest. Evapotranspiration is a main driver of water demand within the study area.