Carlos Daniel Pintassilgo
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Carlos Daniel Pintassilgo has a total of 97 co-authors. Here are the top co-authors by number of shared publications:
- Vasco Guerra
Instituto de Plasmas e Fusão Nuclear
21 shared publications - Jorge Loureiro
Universidade de Lisboa
13 shared publications - Luis Lemos Alves
Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa
8 shared publications - Tiago Silva
Universidade de Lisboa
6 shared publications - Olivier Guaitella
LPP, CNRS, École Polytechnique, Sorbonne Université, Université Paris-Saclay, IP-Paris 91128 Palaiseau, France
5 shared publications A Rousseau
4 shared publications
Latest Publications
- Open Access
- 12 November 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
LoKI-GM: a global model framework for plasma chemistry studies
Global (zero-dimensional or spatially averaged) models are widely employed to study complex chemistries in low-temperature plasmas (LTPs). By adopting a spatially average description of the plasma, they substantially reduce the computational cost while still providing reliable and detailed insight into the key processes taking place in the plasma. In their most general formulation, global models involve the coupled solution of a Boltzmann solver (to describe the electron kinetics) and a Chemistry solver (to describe the heavy-species kinetics). This paper presents a tutorial on the LisbOn Kinetics Global Model (LoKI-GM) framework, developed in MATLAB and available as open-source code. The framework couples the Boltzmann solver LoKI-B, which solves the space-independent form of the two-term electron Boltzmann equation for non-magnetised non-equilibrium LTPs, excited by DC/HF electric fields or time-dependent (non-oscillatory) electric fields, and the Chemistry solver LoKI-C, which solves the system of zero-dimensional rate balance equations for the main charged and neutral species in the plasma and at the surface, receiving as input the kinetic schemes for the gas/plasma/surface system under study. Distinctive features of LoKI-GM include the closure of the model through charge neutrality, which yields the self-consistent maintenance field of DC and HF discharges, and the availability of several transport models for charged and neutral species. LoKI-GM can also couple a microkinetic mesoscopic surface model and a gas thermal model to the volume kinetics. We briefly present the formulation of LoKI-GM, including its numerical solution strategy, input/output parameters, and calculation workflow for both active discharges and afterglow plasmas. The main differences with respect to existing global models are highlighted, and the flexibility of the code for plasma chemistry studies is demonstrated through representative simulation results obtained across a range of gas discharge configurations and operating conditions.
- 12 November 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
Open AccessLoKI-GM: a global model framework for plasma chemistry studies
Global (zero-dimensional or spatially averaged) models are widely employed to study complex chemistries in low-temperature plasmas (LTPs). By adopting a spatially average description of the plasma, they substantially reduce the computational cost while still providing reliable and detailed insight into the key processes taking place in the plasma. In their most general formulation, global models involve the coupled solution of a Boltzmann solver (to describe the electron kinetics) and a Chemistry solver (to describe the heavy-species kinetics). This paper presents a tutorial on the LisbOn Kinetics Global Model (LoKI-GM) framework, developed in MATLAB and available as open-source code. The framework couples the Boltzmann solver LoKI-B, which solves the space-independent form of the two-term electron Boltzmann equation for non-magnetised non-equilibrium LTPs, excited by DC/HF electric fields or time-dependent (non-oscillatory) electric fields, and the Chemistry solver LoKI-C, which solves the system of zero-dimensional rate balance equations for the main charged and neutral species in the plasma and at the surface, receiving as input the kinetic schemes for the gas/plasma/surface system under study. Distinctive features of LoKI-GM include the closure of the model through charge neutrality, which yields the self-consistent maintenance field of DC and HF discharges, and the availability of several transport models for charged and neutral species. LoKI-GM can also couple a microkinetic mesoscopic surface model and a gas thermal model to the volume kinetics. We briefly present the formulation of LoKI-GM, including its numerical solution strategy, input/output parameters, and calculation workflow for both active discharges and afterglow plasmas. The main differences with respect to existing global models are highlighted, and the flexibility of the code for plasma chemistry studies is demonstrated through representative simulation results obtained across a range of gas discharge configurations and operating conditions.
- Open Access
- 1 October 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (10) , 105012
Nanosecond-pulsed volume DBD plasma in saturated humid air: a combined experimental and computational study using EFISH and LIF
This study presents a detailed investigation of a nanosecond-pulsed volume dielectric barrier discharge (VDBD) plasma in saturated humid air at atmospheric pressure, combining experimental diagnostics with kinetic modeling. Electric field-induced second harmonic generation (EFISH), employing a spatial filter and a picosecond laser, enabled electric field measurements with high spatial (270 µm) and temporal (28 ps) resolution at three distinct positions across the inter-electrode VDBD gap. These measurements revealed previously unobserved features and consistent differences between the discharge center and regions near the ground and high-voltage (HV) electrodes. Near the ground electrode, a higher electric field was observed prior to the first positive plasma discharge, along with an overshoot up to 50 kV cm−1 during plasma breakdown, absent at the center and near the HV electrode. A sharper post-breakdown decrease and recovery in the electric field was also observed near the ground electrode, differently from the other positions. This pattern inverted during the subsequent negative discharge at the end of the HV pulse, with the higher electric field being measured near the HV electrode. To complement the electric field data, the concentrations of nitric oxide (NO) and hydroxyl radical (OH) were measured using laser-induced fluorescence (LIF), providing insight into their temporal dynamics during and after the discharge. The EFISH data served as input for a zero-dimensional kinetic model, which revealed the dynamics of both charged and neutral species, showing excellent agreement with the LIF data and validating the model accuracy. The simulation identified OH−, O 2 − , and O 4 − as the key negative ions responsible for the stable electric field after plasma breakdown. This research highlights the importance of understanding electric field dynamics and reactive species formation in low-temperature plasmas. Integrating EFISH and LIF data with kinetic modeling provides a robust framework to optimize plasma-based systems, improving their performance and safety in practical applications.
- 1 October 2025
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 34 (10) , 105012
Open AccessNanosecond-pulsed volume DBD plasma in saturated humid air: a combined experimental and computational study using EFISH and LIF
This study presents a detailed investigation of a nanosecond-pulsed volume dielectric barrier discharge (VDBD) plasma in saturated humid air at atmospheric pressure, combining experimental diagnostics with kinetic modeling. Electric field-induced second harmonic generation (EFISH), employing a spatial filter and a picosecond laser, enabled electric field measurements with high spatial (270 µm) and temporal (28 ps) resolution at three distinct positions across the inter-electrode VDBD gap. These measurements revealed previously unobserved features and consistent differences between the discharge center and regions near the ground and high-voltage (HV) electrodes. Near the ground electrode, a higher electric field was observed prior to the first positive plasma discharge, along with an overshoot up to 50 kV cm−1 during plasma breakdown, absent at the center and near the HV electrode. A sharper post-breakdown decrease and recovery in the electric field was also observed near the ground electrode, differently from the other positions. This pattern inverted during the subsequent negative discharge at the end of the HV pulse, with the higher electric field being measured near the HV electrode. To complement the electric field data, the concentrations of nitric oxide (NO) and hydroxyl radical (OH) were measured using laser-induced fluorescence (LIF), providing insight into their temporal dynamics during and after the discharge. The EFISH data served as input for a zero-dimensional kinetic model, which revealed the dynamics of both charged and neutral species, showing excellent agreement with the LIF data and validating the model accuracy. The simulation identified OH−, O 2 − , and O 4 − as the key negative ions responsible for the stable electric field after plasma breakdown. This research highlights the importance of understanding electric field dynamics and reactive species formation in low-temperature plasmas. Integrating EFISH and LIF data with kinetic modeling provides a robust framework to optimize plasma-based systems, improving their performance and safety in practical applications.
- Open Access
- 20 June 2024
- Published by Springer Nature in Plasma Chemistry and Plasma Processing
- Vol. 44 (4) , 1575-1594
Modeling Study of Chemical Kinetics and Vibrational Excitation in a Volumetric DBD in Humid Air at Atmospheric Pressure
A zero-dimensionl model is developed to study the chemical kinetics of a volumetric dielectric barrier discharge (DBD) reactor operating with humid air at atmospheric pressure. This work focuses on the relation between molecular vibrational excitation, the plasma reactor input power and the number densities of several species that are known to play an important role in biomedical applications (e.g. $$\textrm{O}_{3},\textrm{NO, NO}_{2}$$ , ...). A preliminary study is carried out to observe the influence of water molecules on the electron energy distribution function for different values of water concentration and reduced electric field. A simplified approach is then adopted to quantify the contribution of vibrationally-excited $$\textrm{O}_{2}$$ molecules to $$\textrm{NO}$$ formation. The results obtained using our detailed model suggest that for the physical conditions considered in this work $$\textrm{O}_{2}$$ vibrational kinetics can be neglected without compromising the overall accuracy of the simulation. Finally, a reaction set is coupled with an equivalent circuit model to simulate the E-I characteristic of a typical DBD reactor. Different simulations were carried out considering different values of the average plasma input power densities. A particular focus was given to the influence of the Zeldovich mechanism on $$\textrm{O}_{3}$$ and $$\textrm{NO}_\textrm{X}$$ production performing simulations where this reaction is not considered. The obtained results are shown and the role of vibrationally excited $$\textrm{N}_{2}$$ molecules is discussed. The simulation results indicate also that $$\textrm{N}_{2}$$ vibrational excitation, and more precisely the Zeldovich mechanism, has a larger effect on $$\textrm{O}_{3}$$ and $$\textrm{NO}_\textrm{X}$$ production at intermediate input power levels.- 20 June 2024
- Published by Springer Nature in Plasma Chemistry and Plasma Processing
- Vol. 44 (4) , 1575-1594
Open AccessModeling Study of Chemical Kinetics and Vibrational Excitation in a Volumetric DBD in Humid Air at Atmospheric Pressure
A zero-dimensionl model is developed to study the chemical kinetics of a volumetric dielectric barrier discharge (DBD) reactor operating with humid air at atmospheric pressure. This work focuses on the relation between molecular vibrational excitation, the plasma reactor input power and the number densities of several species that are known to play an important role in biomedical applications (e.g. $$\textrm{O}_{3},\textrm{NO, NO}_{2}$$ , ...). A preliminary study is carried out to observe the influence of water molecules on the electron energy distribution function for different values of water concentration and reduced electric field. A simplified approach is then adopted to quantify the contribution of vibrationally-excited $$\textrm{O}_{2}$$ molecules to $$\textrm{NO}$$ formation. The results obtained using our detailed model suggest that for the physical conditions considered in this work $$\textrm{O}_{2}$$ vibrational kinetics can be neglected without compromising the overall accuracy of the simulation. Finally, a reaction set is coupled with an equivalent circuit model to simulate the E-I characteristic of a typical DBD reactor. Different simulations were carried out considering different values of the average plasma input power densities. A particular focus was given to the influence of the Zeldovich mechanism on $$\textrm{O}_{3}$$ and $$\textrm{NO}_\textrm{X}$$ production performing simulations where this reaction is not considered. The obtained results are shown and the role of vibrationally excited $$\textrm{N}_{2}$$ molecules is discussed. The simulation results indicate also that $$\textrm{N}_{2}$$ vibrational excitation, and more precisely the Zeldovich mechanism, has a larger effect on $$\textrm{O}_{3}$$ and $$\textrm{NO}_\textrm{X}$$ production at intermediate input power levels. - Open Access
- 1 September 2023
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 32 (9) , 095003
Effect of the magnetic field on the electron kinetics under AC/DC electric fields: benchmark calculations and electron cyclotron resonance
This work presents a numerical study of the electron kinetics under AC/DC electric fields and DC magnetic fields crossed at arbitrary angles. The physical phenomena are studied both in model gases (Reid-ramp and Lucas–Saelee) and in real gases (N2 and Ar). The simulations are carried out with an upgraded version of the Monte Carlo open-source code LoKI-MC. The code is compared against several independent benchmark calculations available in the literature. In addition, new benchmark calculations for electron kinetics solvers are produced in conditions of coexistent AC electric and DC magnetic fields, accounting for the effect of the crossing angle between the fields and discriminating the evolution along the AC cycle. The role of the magnetic field is discussed, distinguishing the configurations with DC and AC electric fields. In DC electric fields, the oscillatory motion caused by the magnetic field decreases the efficiency of the electron acceleration, which manifests on the power absorbed by the electric field and on the electron mean energy. Notably, an exceptional behavior is found in Ar for small regions of E / N and B / N , where: for constant B / N , the mean energy decreases with increasing E / N ; and, for constant E / N , it increases with increasing B / N . These phenomena were firstly reported by Ness and Makabe in 2000 and are now confirmed by means of Monte Carlo simulations. In AC electric fields, when the magnetic field value is such that the electron cyclotron frequency is similar to the angular frequency of the electric field, the synchronization of the cyclotron motion with the electric field enhances electron acceleration, through the well-known electron cyclotron resonance. However, for conditions where the mean collision frequency is much higher than the cyclotron frequency, the synchronization tends to breakdown and the magnetic field is detrimental for the electron acceleration, as in the DC electric field case.
- 1 September 2023
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 32 (9) , 095003
Open AccessEffect of the magnetic field on the electron kinetics under AC/DC electric fields: benchmark calculations and electron cyclotron resonance
This work presents a numerical study of the electron kinetics under AC/DC electric fields and DC magnetic fields crossed at arbitrary angles. The physical phenomena are studied both in model gases (Reid-ramp and Lucas–Saelee) and in real gases (N2 and Ar). The simulations are carried out with an upgraded version of the Monte Carlo open-source code LoKI-MC. The code is compared against several independent benchmark calculations available in the literature. In addition, new benchmark calculations for electron kinetics solvers are produced in conditions of coexistent AC electric and DC magnetic fields, accounting for the effect of the crossing angle between the fields and discriminating the evolution along the AC cycle. The role of the magnetic field is discussed, distinguishing the configurations with DC and AC electric fields. In DC electric fields, the oscillatory motion caused by the magnetic field decreases the efficiency of the electron acceleration, which manifests on the power absorbed by the electric field and on the electron mean energy. Notably, an exceptional behavior is found in Ar for small regions of E / N and B / N , where: for constant B / N , the mean energy decreases with increasing E / N ; and, for constant E / N , it increases with increasing B / N . These phenomena were firstly reported by Ness and Makabe in 2000 and are now confirmed by means of Monte Carlo simulations. In AC electric fields, when the magnetic field value is such that the electron cyclotron frequency is similar to the angular frequency of the electric field, the synchronization of the cyclotron motion with the electric field enhances electron acceleration, through the well-known electron cyclotron resonance. However, for conditions where the mean collision frequency is much higher than the cyclotron frequency, the synchronization tends to breakdown and the magnetic field is detrimental for the electron acceleration, as in the DC electric field case.
- 24 June 2021
- Published by Springer Nature in The European Physical Journal D
- Vol. 75 (6) , 1-35
Theoretical and experimental aspects of non-equilibrium plasmas in different regimes: fundamentals and selected applications
- 24 June 2021
- Published by Springer Nature in The European Physical Journal D
- Vol. 75 (6) , 1-35
Theoretical and experimental aspects of non-equilibrium plasmas in different regimes: fundamentals and selected applications
- Open Access
- 1 June 2021
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 30 (6) , 065008
On the quasi-stationary approach to solve the electron Boltzmann equation in pulsed plasmas
This work analyzes the temporal evolution of the electron kinetics in dry-air plasmas (80% N2: 20% O2), excited by electric-field pulses with typical rise-times of 10−9 and 10−6 s, applied to a stationary neutral gaseous background at pressures of 105, 133 Pa and temperature of 300 K. The study is based on the solution of the electron Boltzmann equation (EBE), adopting either (i) a time-dependent formulation that considers an intrinsic time evolution for the electron energy distribution function (EEDF), assuming the classical two-term expansion and a space-independent exponential temporal growth of the electron density; or (ii) a quasi-stationary approach, where the time-independent form of the EBE is solved for different values of the reduced electric-field over the duration of the pulse. The EBE was solved using the LisbOn KInetics Boltzmann solver (LoKI-B), whose original capabilities were extended to accept time-dependent non-oscillatory electric fields as input data. The role of electron–electron collisions, under specific conditions, is also reported and discussed. The simulations show that the quasi-stationary approach gives solutions similar to the time-dependent formulation for rise-times longer than the characteristic evolution time of the EEDF, i.e. 20 ns at 105 Pa and 20 μs at 133 Pa, meaning that a quasi-stationary description is possible in a high-collisionality situation and long rise-times (e.g. microsecond pulses at atmospheric pressure), failing for faster rise-times (e.g. nanosecond pulses for both pressures considered here).
- 1 June 2021
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 30 (6) , 065008
Open AccessOn the quasi-stationary approach to solve the electron Boltzmann equation in pulsed plasmas
This work analyzes the temporal evolution of the electron kinetics in dry-air plasmas (80% N2: 20% O2), excited by electric-field pulses with typical rise-times of 10−9 and 10−6 s, applied to a stationary neutral gaseous background at pressures of 105, 133 Pa and temperature of 300 K. The study is based on the solution of the electron Boltzmann equation (EBE), adopting either (i) a time-dependent formulation that considers an intrinsic time evolution for the electron energy distribution function (EEDF), assuming the classical two-term expansion and a space-independent exponential temporal growth of the electron density; or (ii) a quasi-stationary approach, where the time-independent form of the EBE is solved for different values of the reduced electric-field over the duration of the pulse. The EBE was solved using the LisbOn KInetics Boltzmann solver (LoKI-B), whose original capabilities were extended to accept time-dependent non-oscillatory electric fields as input data. The role of electron–electron collisions, under specific conditions, is also reported and discussed. The simulations show that the quasi-stationary approach gives solutions similar to the time-dependent formulation for rise-times longer than the characteristic evolution time of the EEDF, i.e. 20 ns at 105 Pa and 20 μs at 133 Pa, meaning that a quasi-stationary description is possible in a high-collisionality situation and long rise-times (e.g. microsecond pulses at atmospheric pressure), failing for faster rise-times (e.g. nanosecond pulses for both pressures considered here).
- Top Cited Papers
- 1 July 2019
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 28 (7) , 073001
Modelling N 2 –O 2 plasmas: volume and surface kinetics
This paper reviews the basics of kinetic modelling in low-temperature N 2 –O 2 plasmas, including the strong coupling between electron, vibrational, chemical and surface kinetics. The main approaches to investigate each of these kinetics are outlined and the most widely used ones are discussed in some detail. The interdependency of the different kinetics is also considered. In such a formulation, the building blocks of kinetic models in molecular plasmas are the electron Boltzmann equation, a system of rate balance equations describing the creation and loss of the most important neutral and charged heavy-particles, including the relevant vibrationally excited states and all vibration energy transfers, a proper description of transport of charged particles, and a description of heterogeneous particle destruction and molecule formation. All the details required to build a model for N 2 –O 2 plasmas are given either explicitly or by indicating relevant references, so that the interested reader has all the necessary information to build a similar model. Some new calculations are presented to illustrate and study a few specific phenomena, including the electron power transfer in air plasmas, the formation of the vibrational distribution function in O 2 dc discharges, the calculation of gas heating in pulsed air plasmas, and the heterogeneous formation of ozone in an oxygen afterglow. Finally, some open challenges and directions for further research are pointed out.
- 1 July 2019
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 28 (7) , 073001
Top Cited PapersModelling N 2 –O 2 plasmas: volume and surface kinetics
This paper reviews the basics of kinetic modelling in low-temperature N 2 –O 2 plasmas, including the strong coupling between electron, vibrational, chemical and surface kinetics. The main approaches to investigate each of these kinetics are outlined and the most widely used ones are discussed in some detail. The interdependency of the different kinetics is also considered. In such a formulation, the building blocks of kinetic models in molecular plasmas are the electron Boltzmann equation, a system of rate balance equations describing the creation and loss of the most important neutral and charged heavy-particles, including the relevant vibrationally excited states and all vibration energy transfers, a proper description of transport of charged particles, and a description of heterogeneous particle destruction and molecule formation. All the details required to build a model for N 2 –O 2 plasmas are given either explicitly or by indicating relevant references, so that the interested reader has all the necessary information to build a similar model. Some new calculations are presented to illustrate and study a few specific phenomena, including the electron power transfer in air plasmas, the formation of the vibrational distribution function in O 2 dc discharges, the calculation of gas heating in pulsed air plasmas, and the heterogeneous formation of ozone in an oxygen afterglow. Finally, some open challenges and directions for further research are pointed out.
- Open Access
- 1 April 2019
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 28 (4) , 043001
The LisbOn KInetics Boltzmann solver
- 1 April 2019
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 28 (4) , 043001
Open AccessThe LisbOn KInetics Boltzmann solver
- 21 November 2018
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 61 (1) , 014026
Kinetic mechanisms in air plasmas
A self-consistent kinetic model is developed to study air (N 2 –20%O 2 ) plasma discharges in single pulses, their afterglows, and in repetitively pulsed discharges produced at low-pressures (133, 210 and 400 Pa) in a 1 cm inner radius tube. Since the pulse duration ranges from ∼0.3 up to ∼10 ms, the model includes the interplay of the vibrational kinetics of N 2 and chemical kinetics involving neutral, excited and charged species, which are coupled to the electron Boltzmann equation during the active plasma phase. A satisfactory agreement is found between modelling simulations and different experimental results. A comprehensive and detailed analysis of the modelling calculations is carried out, providing a general overview and insight of the most important mechanisms that take place in air plasmas at low-pressures.
- 21 November 2018
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 61 (1) , 014026
Kinetic mechanisms in air plasmas
A self-consistent kinetic model is developed to study air (N 2 –20%O 2 ) plasma discharges in single pulses, their afterglows, and in repetitively pulsed discharges produced at low-pressures (133, 210 and 400 Pa) in a 1 cm inner radius tube. Since the pulse duration ranges from ∼0.3 up to ∼10 ms, the model includes the interplay of the vibrational kinetics of N 2 and chemical kinetics involving neutral, excited and charged species, which are coupled to the electron Boltzmann equation during the active plasma phase. A satisfactory agreement is found between modelling simulations and different experimental results. A comprehensive and detailed analysis of the modelling calculations is carried out, providing a general overview and insight of the most important mechanisms that take place in air plasmas at low-pressures.
- 1 November 2018
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 27 (11) , 115009
Kinetic study of CO 2 plasmas under non-equilibrium conditions. II. Input of vibrational energy
This is the second of two papers presenting the study of vibrational energy exchanges in non-equilibrium CO 2 plasmas in low-excitation conditions. The companion paper addresses a theoretical and experimental investigation of the time relaxation of ∼70 individual vibrational levels of ground-state CO 2 ( X 1 Σ + ) molecules during the afterglow of a pulsed DC glow discharge, operating at pressures of a few Torr and discharge currents around 50 mA, where the rate coefficients for vibration–translation (V–T) and vibration–vibration (V–V) energy transfers among these levels are validated (Silva et al 2018 Plasma Sources Sci. Technol. 27 015019). Herein, the investigation is focused on the active discharge, by extending the model with the inclusion of electron impact processes for vibrational excitation and de-excitation (e-V). The time-dependent calculated densities of the different vibrational levels are compared with experimental data obtained from time-resolved in situ Fourier transform infrared spectroscopy. It is shown that the vibrational temperature of the asymmetric stretching mode is always larger than the vibrational temperatures of the bending and symmetric stretching modes along the discharge pulse—the latter two remaining very nearly the same and close to the gas temperature. The general good agreement between the model predictions and the experimental results validates the e-V rate coefficients used and provides assurance that the proposed kinetic scheme provides a solid basis to understand the vibrational energy exchanges occurring in CO 2 plasmas.
- 1 November 2018
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 27 (11) , 115009
Kinetic study of CO 2 plasmas under non-equilibrium conditions. II. Input of vibrational energy
This is the second of two papers presenting the study of vibrational energy exchanges in non-equilibrium CO 2 plasmas in low-excitation conditions. The companion paper addresses a theoretical and experimental investigation of the time relaxation of ∼70 individual vibrational levels of ground-state CO 2 ( X 1 Σ + ) molecules during the afterglow of a pulsed DC glow discharge, operating at pressures of a few Torr and discharge currents around 50 mA, where the rate coefficients for vibration–translation (V–T) and vibration–vibration (V–V) energy transfers among these levels are validated (Silva et al 2018 Plasma Sources Sci. Technol. 27 015019). Herein, the investigation is focused on the active discharge, by extending the model with the inclusion of electron impact processes for vibrational excitation and de-excitation (e-V). The time-dependent calculated densities of the different vibrational levels are compared with experimental data obtained from time-resolved in situ Fourier transform infrared spectroscopy. It is shown that the vibrational temperature of the asymmetric stretching mode is always larger than the vibrational temperatures of the bending and symmetric stretching modes along the discharge pulse—the latter two remaining very nearly the same and close to the gas temperature. The general good agreement between the model predictions and the experimental results validates the e-V rate coefficients used and provides assurance that the proposed kinetic scheme provides a solid basis to understand the vibrational energy exchanges occurring in CO 2 plasmas.