Aleksey S. Ivanov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Aleksey S. Ivanov has a total of 364 co-authors. Here are the top co-authors by number of shared publications:
L P Cherepenin
13 shared publicationsS. V. Murkin
Bauman Moscow State Technical University, Moscow, Russia
13 shared publicationsM. M. Ermolaev
Bauman Moscow State Technical University, 105005, Moscow, Russia
10 shared publicationsB A Konstantinov
9 shared publicationsG M Baloian
8 shared publications- Sergey A. Somov
Institute of Continuous Media Mechanics, Ural Branch, Russian Academy of Sciences, Perm, Russia
8 shared publications
Latest Publications
- 15 September 2026
- Published by Elsevier in Journal of Magnetism and Magnetic Materials
- Vol. 657
Ponderomotive force acting on a current-carrying wire in a liquid magnetic medium with linear magnetization law
- 15 September 2026
- Published by Elsevier in Journal of Magnetism and Magnetic Materials
- Vol. 657
Ponderomotive force acting on a current-carrying wire in a liquid magnetic medium with linear magnetization law
- Open Access
- 14 December 2025
- Published by Institute of Continuous Media Mechanics in Computational Continuum Mechanics
- Vol. 18 (3) , 346-353
Магнитное поле в окрестности однородного магнетика, заполняющего осесимметричную односвязную или многосвязную область
Designing inertial magnetorheological sensors requires calculating the spatial distribution of the magnetic field strength and its gradient, which characterize the magnetic system of their sensing elements. A sensing element includes a combined source of a constant magnetic field, consisting of a set of axially magnetized cylindrical, disc, or ring magnets with a finite aspect ratio of their main parameters and non-magnetic inserts. The assembly of magnets and non-magnetic elements is covered with a magnetic fluid that acts as a lubricant and is held in place by the field created by the assembly. The aim of the study is to obtain an expression that mathematically represents the magnetic field in the vicinity of an individual permanent magnet or a system of these magnets. The magnetostatic problem was solved in two stages using Ampere's method based on abstract magnetic poles. In the first stage, the north pole of a semi-infinite magnetized cylinder was considered. In the vicinity of this magnet an expression for the scalar magnetic potential was found. In the second stage, by applying the principle of superposition, an expression for the field near disc and ring magnets in a cylindrical coordinate system was obtained. The constructed expressions contain infinite series, which makes them difficult to use in practice. The number of terms in a series sufficient to describe the field with a predetermined accuracy was determined by comparing the data of analytical and numerical calculations. The corresponding two-dimensional axisymmetric magnetostatic problem was solved numerically using the Finite Element Method Magnetics package. For disc and ring magnets, the magnetic field strength magnitude at points in the surrounding space was calculated. It is shown that the first six terms in a series are sufficient for analytical and numerical solutions to coincide within 2%, which is an acceptable deviation equal to the typical instrument error of a modern teslameter. As the number of terms in a series increases, the error decreases, but the complexity of calculations increases. Moreover, it is impossible to verify the increase in accuracy experimentally. In the case of axisymmetric combined field sources, the derived expressions simplify the calculation of the magnetic field. The expression for the magnetic field distribution proposed by the authors can be used for the optimization of the design and manufacture of magnetofluid sensors.
- 14 December 2025
- Published by Institute of Continuous Media Mechanics in Computational Continuum Mechanics
- Vol. 18 (3) , 346-353
Open AccessМагнитное поле в окрестности однородного магнетика, заполняющего осесимметричную односвязную или многосвязную область
Designing inertial magnetorheological sensors requires calculating the spatial distribution of the magnetic field strength and its gradient, which characterize the magnetic system of their sensing elements. A sensing element includes a combined source of a constant magnetic field, consisting of a set of axially magnetized cylindrical, disc, or ring magnets with a finite aspect ratio of their main parameters and non-magnetic inserts. The assembly of magnets and non-magnetic elements is covered with a magnetic fluid that acts as a lubricant and is held in place by the field created by the assembly. The aim of the study is to obtain an expression that mathematically represents the magnetic field in the vicinity of an individual permanent magnet or a system of these magnets. The magnetostatic problem was solved in two stages using Ampere's method based on abstract magnetic poles. In the first stage, the north pole of a semi-infinite magnetized cylinder was considered. In the vicinity of this magnet an expression for the scalar magnetic potential was found. In the second stage, by applying the principle of superposition, an expression for the field near disc and ring magnets in a cylindrical coordinate system was obtained. The constructed expressions contain infinite series, which makes them difficult to use in practice. The number of terms in a series sufficient to describe the field with a predetermined accuracy was determined by comparing the data of analytical and numerical calculations. The corresponding two-dimensional axisymmetric magnetostatic problem was solved numerically using the Finite Element Method Magnetics package. For disc and ring magnets, the magnetic field strength magnitude at points in the surrounding space was calculated. It is shown that the first six terms in a series are sufficient for analytical and numerical solutions to coincide within 2%, which is an acceptable deviation equal to the typical instrument error of a modern teslameter. As the number of terms in a series increases, the error decreases, but the complexity of calculations increases. Moreover, it is impossible to verify the increase in accuracy experimentally. In the case of axisymmetric combined field sources, the derived expressions simplify the calculation of the magnetic field. The expression for the magnetic field distribution proposed by the authors can be used for the optimization of the design and manufacture of magnetofluid sensors.
- 24 November 2025
- Published by Pleiades Publishing Ltd in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 89 (S1) , S34-S40
Heat Flow Measurements in Gas Mixtures of Air with Undecane or Water Vapor Exhibiting Phase Transitions
Heat flows characterizing free thermoconcentration convection of air–gas mixtures with undecane or water vapor, exhibiting first-order phase transitions, were measured. In the case of undecane, the Nu(Ra) dependence closely matches that of dry air. It is shown that experimental data for humid air require supplementary numerical processing, accounting for intensive and complex diffusive mass transfer. The role of thermodiffusion and Stefan flow in humid air is discussed.
- 24 November 2025
- Published by Pleiades Publishing Ltd in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 89 (S1) , S34-S40
Heat Flow Measurements in Gas Mixtures of Air with Undecane or Water Vapor Exhibiting Phase Transitions
Heat flows characterizing free thermoconcentration convection of air–gas mixtures with undecane or water vapor, exhibiting first-order phase transitions, were measured. In the case of undecane, the Nu(Ra) dependence closely matches that of dry air. It is shown that experimental data for humid air require supplementary numerical processing, accounting for intensive and complex diffusive mass transfer. The role of thermodiffusion and Stefan flow in humid air is discussed.
- 24 November 2025
- Published by Pleiades Publishing Ltd in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 89 (S1) , S9-S14
Magnetic Field of a Ferrofluid Support Composed of Cylindrical Magnetic and Non-Magnetic Body Sequence
A spatially periodic gradient magnetic field generated by cylindrical assemblies of permanent magnets and non-magnetic washers is investigated numerically. The study shows that the magnetic fluid is most efficiently retained within the coaxial gap between the assembly and the outer non-magnetic wall when the distance between adjacent magnets exceeds their height.
- 24 November 2025
- Published by Pleiades Publishing Ltd in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 89 (S1) , S9-S14
Magnetic Field of a Ferrofluid Support Composed of Cylindrical Magnetic and Non-Magnetic Body Sequence
A spatially periodic gradient magnetic field generated by cylindrical assemblies of permanent magnets and non-magnetic washers is investigated numerically. The study shows that the magnetic fluid is most efficiently retained within the coaxial gap between the assembly and the outer non-magnetic wall when the distance between adjacent magnets exceeds their height.
- 1 October 2025
- Published by Allerton Press in Russian Engineering Research
- Vol. 45 (10) , 1360-1366
Calculation of a Highly Loaded Gear Coupling
Calculations for highly loaded gear couplings are developed. Calculations of the bending endurance of gear teeth and of the heat generation processes that
- 1 October 2025
- Published by Allerton Press in Russian Engineering Research
- Vol. 45 (10) , 1360-1366
Calculation of a Highly Loaded Gear Coupling
Calculations for highly loaded gear couplings are developed. Calculations of the bending endurance of gear teeth and of the heat generation processes that
- Open Access
- 10 August 2025
- Published by Institute of Continuous Media Mechanics in Computational Continuum Mechanics
- Vol. 18 (2) , 214-224
Получение и сравнение расчетных и экспериментальных голографических интерферограмм для описания квази-2D конвективного течения прозрачной газовой смеси
The numerical simulation made in this research serves as a methodological and proof basis for the previously performed experiments on steady-state thermoconcentration convection in gas mixtures of dry air and undecane or water vapor. Experimental data were obtained by two methods: a thermocouple method for quantitative description of the heat flux and holographic interferometry for qualitative visualization of the transparent gas motion (as an alternative to the particle image velocimetry). Convection due to the simultaneous action of vapor concentration and temperature gradients is described by the ratio of the concentration Rayleigh number for the gas mixture and the thermal Rayleigh number for dry air at the same temperature. The quantitative data from thermocouple measurements are interpreted under the assumption of a single-vortex quasi-two-dimensional flow in a rectangular convective cell of dimensions 15х15х320 mm. The aim of the work is to verify and validate the flow of this type by comparing the experimental and calculated interferograms (light refractive index surface) obtained from numerical simulations of thermal convection of dry air. The boundary conditions and geometry of the problem correspond to the experimental conditions. The equations of thermal convection in the Boussinesq approximation are written in the formulation of the two-field approach. The system of differential equations is solved numerically using a grid method by means of a program written in the Python programming language. The experimental interferograms were processed manually in a graphic editor. A direct comparison of about fifty pairs of coinciding experimental and calculated interferograms relating to the same values of temperatures of the heater and cooler of the cell was performed. The comparison of the calculated data and measurements confirmed the correctness of prediction of a single-vortex two-dimensional convective gas flow.
- 10 August 2025
- Published by Institute of Continuous Media Mechanics in Computational Continuum Mechanics
- Vol. 18 (2) , 214-224
Open AccessПолучение и сравнение расчетных и экспериментальных голографических интерферограмм для описания квази-2D конвективного течения прозрачной газовой смеси
The numerical simulation made in this research serves as a methodological and proof basis for the previously performed experiments on steady-state thermoconcentration convection in gas mixtures of dry air and undecane or water vapor. Experimental data were obtained by two methods: a thermocouple method for quantitative description of the heat flux and holographic interferometry for qualitative visualization of the transparent gas motion (as an alternative to the particle image velocimetry). Convection due to the simultaneous action of vapor concentration and temperature gradients is described by the ratio of the concentration Rayleigh number for the gas mixture and the thermal Rayleigh number for dry air at the same temperature. The quantitative data from thermocouple measurements are interpreted under the assumption of a single-vortex quasi-two-dimensional flow in a rectangular convective cell of dimensions 15х15х320 mm. The aim of the work is to verify and validate the flow of this type by comparing the experimental and calculated interferograms (light refractive index surface) obtained from numerical simulations of thermal convection of dry air. The boundary conditions and geometry of the problem correspond to the experimental conditions. The equations of thermal convection in the Boussinesq approximation are written in the formulation of the two-field approach. The system of differential equations is solved numerically using a grid method by means of a program written in the Python programming language. The experimental interferograms were processed manually in a graphic editor. A direct comparison of about fifty pairs of coinciding experimental and calculated interferograms relating to the same values of temperatures of the heater and cooler of the cell was performed. The comparison of the calculated data and measurements confirmed the correctness of prediction of a single-vortex two-dimensional convective gas flow.
- Open Access
- 8 August 2025
- Published by Southwest State University in Proceedings of the Southwest State University. Series: Engineering and Technology
- Vol. 15 (2) , 76-88
Dynamic tests of a shock absorber based on elastomer with ferromagnetic micron-sized powder filler
Purpose. Experimental study of the vibration characteristics of a passive damper using an elastomer with ferromagnetic powder filler as a working body.Methods. Measurement of amplitude-frequency characteristics of a uniaxial damper on a vibration test bench in a wide range of frequencies of harmonic action. Laboratory tests of the damper were performed in the loaded and unloaded conditions, varying the simulated payload from 0 to 600 g in 200 g increments.Results. Uniaxial dampers of the original design of Stepanov G.V., consisting of two cylindrical magnetizable elastomers located between three ring permanent magnets facing each other with same poles, were manufactured. The elastic elements are placed inside an assembled supporting housings equipped with flanges for bolting to the vibration test platform. The housings were made of plastic by 3D printing. In a wide range of vibration loads the influence of the magnetic field on the vibration-protective characteristics of the damper by replacing permanent magnets with nonmagnetic washers was investigated. The amplitude-frequency characteristics of the dampers are typical for similar industrial products with a small bandwidth in the lower frequency region and a resonance peak after which the transfer function monotonically decreases. The measured characteristics demonstrate that the presence of permanent magnets in the damper design leads to a significant reduction of the transmission coefficient at the resonant frequency while increasing the bandwidth.Conclusion. Elastomers with powder ferromagnetic filler are promising materials for manufacturing dampers of new designs. The use of magnetic interaction forces of filler particles in the polymer matrix enhances dissipative properties of the damper, which reduces the response of the system at its own resonant frequency, which demonstrates the prospects of their application for the protection of electronic devices under vibration loads.
- 8 August 2025
- Published by Southwest State University in Proceedings of the Southwest State University. Series: Engineering and Technology
- Vol. 15 (2) , 76-88
Open AccessDynamic tests of a shock absorber based on elastomer with ferromagnetic micron-sized powder filler
Purpose. Experimental study of the vibration characteristics of a passive damper using an elastomer with ferromagnetic powder filler as a working body.Methods. Measurement of amplitude-frequency characteristics of a uniaxial damper on a vibration test bench in a wide range of frequencies of harmonic action. Laboratory tests of the damper were performed in the loaded and unloaded conditions, varying the simulated payload from 0 to 600 g in 200 g increments.Results. Uniaxial dampers of the original design of Stepanov G.V., consisting of two cylindrical magnetizable elastomers located between three ring permanent magnets facing each other with same poles, were manufactured. The elastic elements are placed inside an assembled supporting housings equipped with flanges for bolting to the vibration test platform. The housings were made of plastic by 3D printing. In a wide range of vibration loads the influence of the magnetic field on the vibration-protective characteristics of the damper by replacing permanent magnets with nonmagnetic washers was investigated. The amplitude-frequency characteristics of the dampers are typical for similar industrial products with a small bandwidth in the lower frequency region and a resonance peak after which the transfer function monotonically decreases. The measured characteristics demonstrate that the presence of permanent magnets in the damper design leads to a significant reduction of the transmission coefficient at the resonant frequency while increasing the bandwidth.Conclusion. Elastomers with powder ferromagnetic filler are promising materials for manufacturing dampers of new designs. The use of magnetic interaction forces of filler particles in the polymer matrix enhances dissipative properties of the damper, which reduces the response of the system at its own resonant frequency, which demonstrates the prospects of their application for the protection of electronic devices under vibration loads.
- 1 August 2025
- Published by Innovative Mashinostroenie Publishing
Influence of lubricants on tribological properties of powder mixtures based on low-alloyed iron powder
The influence of lubricants on the tribological parameters of powder mixtures based on low-alloy iron powder (УЕ-6) is studied. The technological properties of samples pressed from УЕ-6 at a constant pressure of 1000 MPa with liquid (machine oil) and solid (graphite and zinc stearate) lubricants in different ratios are investigated. Keywords iron powder, lubricant, compressibility, pressure, machine oil, graphite, zinc stearate, porosity saida.jafarova2011@gmail.com
- 1 August 2025
- Published by Innovative Mashinostroenie Publishing
Influence of lubricants on tribological properties of powder mixtures based on low-alloyed iron powder
The influence of lubricants on the tribological parameters of powder mixtures based on low-alloy iron powder (УЕ-6) is studied. The technological properties of samples pressed from УЕ-6 at a constant pressure of 1000 MPa with liquid (machine oil) and solid (graphite and zinc stearate) lubricants in different ratios are investigated. Keywords iron powder, lubricant, compressibility, pressure, machine oil, graphite, zinc stearate, porosity saida.jafarova2011@gmail.com
- 16 July 2025
- Published by Pleiades Publishing Ltd in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 89 (7) , 1058-1065
Experimental Verification of Couette–Poiseuille Flow of a Magnetic Fluid Filling the Coaxial Gap between the Inner Magnetic and Outer Nonmagnetic Walls
An experimental investigation was made of the viscous friction of the coaxial layer of a magnetic fluid between the inner wall of a nonmagnetic tube and a cylindrical assembly of permanent magnets during translational motion of the latter. The results of measurements of friction coefficient were compared with the results of calculations within the framework of analytical models. It was shown that the model prohibiting the flow of the magnetic fluid from the gap gives the best estimate of the friction coefficient. Several series of experiments on laboratory models differing in geometrical dimensions and aspect ratio of magnetic bodies have accumulated experimental data confirming the type of Couette–Poiseuille hydrodynamic flow in the system under study.
- 16 July 2025
- Published by Pleiades Publishing Ltd in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 89 (7) , 1058-1065
Experimental Verification of Couette–Poiseuille Flow of a Magnetic Fluid Filling the Coaxial Gap between the Inner Magnetic and Outer Nonmagnetic Walls
An experimental investigation was made of the viscous friction of the coaxial layer of a magnetic fluid between the inner wall of a nonmagnetic tube and a cylindrical assembly of permanent magnets during translational motion of the latter. The results of measurements of friction coefficient were compared with the results of calculations within the framework of analytical models. It was shown that the model prohibiting the flow of the magnetic fluid from the gap gives the best estimate of the friction coefficient. Several series of experiments on laboratory models differing in geometrical dimensions and aspect ratio of magnetic bodies have accumulated experimental data confirming the type of Couette–Poiseuille hydrodynamic flow in the system under study.
- 1 April 2025
- Published by Allerton Press in Russian Engineering Research
- Vol. 45 (4) , 476-483
Study of Contact Stiffness in Mechanism Joints
The study investigates contact stiffness in joints of mechanisms. The relationships used for calculation of contact-stiffness-related changes in the parame
- 1 April 2025
- Published by Allerton Press in Russian Engineering Research
- Vol. 45 (4) , 476-483
Study of Contact Stiffness in Mechanism Joints
The study investigates contact stiffness in joints of mechanisms. The relationships used for calculation of contact-stiffness-related changes in the parame