Jari Varje
Research Subjects
Research Interests
Jari Varje has a total of 227 co-authors. Here are the top co-authors by number of shared publications:
- Steven A. M. McNamara
Tokamak Energy Ltd
7 shared publications - Aleksei Dnestrovskii
Tokamak Energy Ltd
5 shared publications - Alsu Sladkomedova
Tokamak Energy Ltd
5 shared publications - Chris Marsden
Tokamak Energy Ltd
5 shared publications - E.N.J. Maartensson
Tokamak Energy Ltd
5 shared publications - Elena Vekshina
Tokamak Energy Ltd
5 shared publications
Latest Publications
- Open Access
- 10 July 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (8) , 086008
Physics basis for the reference flat-top plasma scenario in the ST–E1 fusion power plant
As part of the U.S. Department of Energy’s Milestone-Based Fusion Energy Development Program, Tokamak Energy has completed the pre-concept design of the ST–E1 fusion power plant. ST–E1 is envisaged to operate in two phases: a pilot plant phase, targeting sustained net power production of 300 − 500 MWe for a duration > 1 hr , followed by a commercial power plant phase targeting steady-state operations and a normalised overnight capital cost of ⩽ 12 000 $ / kWe . The design process adopted was highly iterative, integrating all major plant systems and progressing in a phased fidelity approach. At the pre-conceptual stage, the emphasis has been on exploring the design space, identifying the main system-level trade-offs, and making the key decisions that define the overall plant concept, rather than optimising a single operating point. This paper, part of a focused collection detailing the ST–E1 pre-concept design, addresses the development of a series of reference flat-top plasma operating points for the pilot plant phase. A modelling workflow was established to develop and assess candidate plasma design points and explore key dependencies. The workflow includes integrated core plasma modelling, magnetohydrodynamic (MHD) stability assessment, equilibrium generation, scrape-off-layer and exhaust modelling, heating & current drive design and optimisation, and turbulent transport modelling. Using this framework, the impact of several key parameters on the flat-top operating space was investigated, including the density limit, core radiation fraction and divertor power loading, level of external heating and curent drive power and assumed pedestal characteristics. The MHD stability, controllability and micro-stability characteristics of these plasmas were also analysed. These investigations informed the definition of a set of fully non-inductive, flat-top reference operating points that satisfy the high-level ST–E1 mission, including a low and high density case, a case that is stable to resistive wall modes and a case with reduced divertor power loading.
- 10 July 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (8) , 086008
Open AccessPhysics basis for the reference flat-top plasma scenario in the ST–E1 fusion power plant
As part of the U.S. Department of Energy’s Milestone-Based Fusion Energy Development Program, Tokamak Energy has completed the pre-concept design of the ST–E1 fusion power plant. ST–E1 is envisaged to operate in two phases: a pilot plant phase, targeting sustained net power production of 300 − 500 MWe for a duration > 1 hr , followed by a commercial power plant phase targeting steady-state operations and a normalised overnight capital cost of ⩽ 12 000 $ / kWe . The design process adopted was highly iterative, integrating all major plant systems and progressing in a phased fidelity approach. At the pre-conceptual stage, the emphasis has been on exploring the design space, identifying the main system-level trade-offs, and making the key decisions that define the overall plant concept, rather than optimising a single operating point. This paper, part of a focused collection detailing the ST–E1 pre-concept design, addresses the development of a series of reference flat-top plasma operating points for the pilot plant phase. A modelling workflow was established to develop and assess candidate plasma design points and explore key dependencies. The workflow includes integrated core plasma modelling, magnetohydrodynamic (MHD) stability assessment, equilibrium generation, scrape-off-layer and exhaust modelling, heating & current drive design and optimisation, and turbulent transport modelling. Using this framework, the impact of several key parameters on the flat-top operating space was investigated, including the density limit, core radiation fraction and divertor power loading, level of external heating and curent drive power and assumed pedestal characteristics. The MHD stability, controllability and micro-stability characteristics of these plasmas were also analysed. These investigations informed the definition of a set of fully non-inductive, flat-top reference operating points that satisfy the high-level ST–E1 mission, including a low and high density case, a case that is stable to resistive wall modes and a case with reduced divertor power loading.
- Open Access
- 10 July 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (8) , 086011
Power and particle exhaust in the ST-E1 fusion power plant
Power exhaust challenges and potential solutions for a 5 m major radius, low-aspect ratio burning tokamak have been explored. 1D edge plasma models have been used to screen for access to detachment using short and long outer divertor legs in double and single null configurations, using Ar as the primary impurity and assuming tungsten plasma-facing components (PFCs). These show that detachment access can be accessed for all but the most conservative assumptions on scrape-off layer (SOL) width and power, but that trade-offs will be required between magnet engineering and the size of the acceptable window of as-yet uncertain plasma parameters. SOLPS-ITER was used to further model selected plasma scenarios, confirming that Ar seeding can be used to achieve dissipative divertor scenarios with peak deposited heat fluxes below 15 MWm − 2 . Initial scoping of first wall loads and positioning of limiters has been carried out, showing the feasibility of protecting the breeding blanket wall during steady state without impeding tritium breeding. Initial PFC technology selection is also presented, identifying this as a critical area where further work is needed to find an attractive solution for helium-cooled PFCs that can handle high heat fluxes without excessive power requirements. Key questions and trade-offs for concept development have been identified, including: how to achieve high radiation for reduction of SOL power without core performance degradation; whether power exhaust can be well-controlled in a double null plasma; mechanical design and materials challenges of high-heat flux PFCs; and control of material erosion, redeposition and tritium retention.
- 10 July 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (8) , 086011
Open AccessPower and particle exhaust in the ST-E1 fusion power plant
Power exhaust challenges and potential solutions for a 5 m major radius, low-aspect ratio burning tokamak have been explored. 1D edge plasma models have been used to screen for access to detachment using short and long outer divertor legs in double and single null configurations, using Ar as the primary impurity and assuming tungsten plasma-facing components (PFCs). These show that detachment access can be accessed for all but the most conservative assumptions on scrape-off layer (SOL) width and power, but that trade-offs will be required between magnet engineering and the size of the acceptable window of as-yet uncertain plasma parameters. SOLPS-ITER was used to further model selected plasma scenarios, confirming that Ar seeding can be used to achieve dissipative divertor scenarios with peak deposited heat fluxes below 15 MWm − 2 . Initial scoping of first wall loads and positioning of limiters has been carried out, showing the feasibility of protecting the breeding blanket wall during steady state without impeding tritium breeding. Initial PFC technology selection is also presented, identifying this as a critical area where further work is needed to find an attractive solution for helium-cooled PFCs that can handle high heat fluxes without excessive power requirements. Key questions and trade-offs for concept development have been identified, including: how to achieve high radiation for reduction of SOL power without core performance degradation; whether power exhaust can be well-controlled in a double null plasma; mechanical design and materials challenges of high-heat flux PFCs; and control of material erosion, redeposition and tritium retention.
- Open Access
- 10 July 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (8) , 086001
Tokamak Energy’s pre-concept design for a fusion power plant: an overview of ST-E1
Climate change and rapidly rising energy demand, driven in part by artificial intelligence and data-centre growth, create an urgent need for stable, low-carbon, and abundant power. Fusion is a promising long-term solution, yet its commercialisation faces a fundamental paradox in today’s investment environment: pilot plants are essential to de-risk physics, engineering, and operations, but their limited lifetime energy output and high upfront costs make them difficult to finance. This paper presents Tokamak Energy’s response: ST-E1, a pre-concept design for a low-aspect-ratio tokamak power plant engineered specifically to overcome this challenge. ST-E1 is designed from the outset for phased operation—pilot and commercial phases, with an upgrade phase in between—with emphasis on commercial viability, maintainability, nuclear engineering, modularity, and upgradability. A key design principle is the deliberate separation of long-lived assets, such as the magnet cage and vacuum vessel, from replaceable in-vessel systems. This provides an attractive and credible investment approach to generate operational data and de-risk key technologies while preserving most capital-intensive assets for later commercial phases. The architecture supports continuous optimisation toward high net electric power (targeting 800–1000 MW net electric), a normalised capital expenditure of $ 12–14k/kW of net electric power, and high availability (targeting > 80 % ). A tokamak core with a 5 m major radius, aspect ratio of 2.3, and on-plasma axis toroidal field of 5.25 T was selected to meet these objectives. This paper summarises the ST-E1 design philosophy, principal features, and development methodology. It introduces a Focus Collection of 11 papers detailing the pre-concept design of the entire tokamak and corresponding plant.
- 10 July 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (8) , 086001
Open AccessTokamak Energy’s pre-concept design for a fusion power plant: an overview of ST-E1
Climate change and rapidly rising energy demand, driven in part by artificial intelligence and data-centre growth, create an urgent need for stable, low-carbon, and abundant power. Fusion is a promising long-term solution, yet its commercialisation faces a fundamental paradox in today’s investment environment: pilot plants are essential to de-risk physics, engineering, and operations, but their limited lifetime energy output and high upfront costs make them difficult to finance. This paper presents Tokamak Energy’s response: ST-E1, a pre-concept design for a low-aspect-ratio tokamak power plant engineered specifically to overcome this challenge. ST-E1 is designed from the outset for phased operation—pilot and commercial phases, with an upgrade phase in between—with emphasis on commercial viability, maintainability, nuclear engineering, modularity, and upgradability. A key design principle is the deliberate separation of long-lived assets, such as the magnet cage and vacuum vessel, from replaceable in-vessel systems. This provides an attractive and credible investment approach to generate operational data and de-risk key technologies while preserving most capital-intensive assets for later commercial phases. The architecture supports continuous optimisation toward high net electric power (targeting 800–1000 MW net electric), a normalised capital expenditure of $ 12–14k/kW of net electric power, and high availability (targeting > 80 % ). A tokamak core with a 5 m major radius, aspect ratio of 2.3, and on-plasma axis toroidal field of 5.25 T was selected to meet these objectives. This paper summarises the ST-E1 design philosophy, principal features, and development methodology. It introduces a Focus Collection of 11 papers detailing the pre-concept design of the entire tokamak and corresponding plant.
- Top Cited PapersOpen Access
- 25 February 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (11)
Overview of ST40 results and future: Expanding the physics basis of high-field spherical tokamaks
The goal of the ST40 programme is to explore the physics of high-field spherical tokamaks (STs), to validate empirical and theoretical models and, hence, to build confidence in predictions required to support the design of future generations of STs. ST40 is a compact high-field ST that has achieved the following parameters: R0 = 0.4–0.55 m, Ip = 0.20–0.85 MA, Bt(R = 0.4 m) = 0.7–2.1 T, κ ≤ 1.9, and A = 1.6–1.9. Highlights of recent experimental results include (i) H-mode and confinement studies at Bt ≤ 2.1 T, (ii) observation of bifurcation of the scrape-off-layer power fall-off width, λq, into a ‘wide’ branch that follows existing H-mode scalings and a ‘narrow’ branch that exhibits λq values that are up to 10 times lower than the predictions of established scalings, (iii) development of high-performance scenarios with plasma current, Ip, up to 0.85 MA, (iv) development of highly non-inductive scenarios with high βp , and (v) the first ST40 experiments utilising the newly commissioned impurity powder dropper. The work on all these topics has been supported by a number of advancements in ST40 hardware and software, from plasma control to data analysis and interpretation. At the end of 2025, ST40 embarked on a major upgrade to further expand its capabilities by introducing, among other improvements, all-metal plasma-facing components, 1MW of electron cyclotron heating, a pellet injector, and a pair of lithium evaporators for wall conditioning.
- 25 February 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (11)
Top Cited PapersOpen AccessOverview of ST40 results and future: Expanding the physics basis of high-field spherical tokamaks
The goal of the ST40 programme is to explore the physics of high-field spherical tokamaks (STs), to validate empirical and theoretical models and, hence, to build confidence in predictions required to support the design of future generations of STs. ST40 is a compact high-field ST that has achieved the following parameters: R0 = 0.4–0.55 m, Ip = 0.20–0.85 MA, Bt(R = 0.4 m) = 0.7–2.1 T, κ ≤ 1.9, and A = 1.6–1.9. Highlights of recent experimental results include (i) H-mode and confinement studies at Bt ≤ 2.1 T, (ii) observation of bifurcation of the scrape-off-layer power fall-off width, λq, into a ‘wide’ branch that follows existing H-mode scalings and a ‘narrow’ branch that exhibits λq values that are up to 10 times lower than the predictions of established scalings, (iii) development of high-performance scenarios with plasma current, Ip, up to 0.85 MA, (iv) development of highly non-inductive scenarios with high βp , and (v) the first ST40 experiments utilising the newly commissioned impurity powder dropper. The work on all these topics has been supported by a number of advancements in ST40 hardware and software, from plasma control to data analysis and interpretation. At the end of 2025, ST40 embarked on a major upgrade to further expand its capabilities by introducing, among other improvements, all-metal plasma-facing components, 1MW of electron cyclotron heating, a pellet injector, and a pair of lithium evaporators for wall conditioning.
- Open Access
- 29 August 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (11) , 112020
Overview of recent results from the ST40 compact high-field spherical tokamak
ST40 is a compact, high-field ( B T 0 ⩽ 2.1 T ) spherical tokamak (ST) with a mission to expand the physics and technology basis for the ST route to commercial fusion. The ST40 research programme covers confinement and stability; solenoid-free start-up; high-performance operating scenarios; and plasma exhaust. In 2022, ST40 obtained central deuterium ion temperatures of 9.6 ± 0.4 keV , demonstrating for the first time that pilot plant relevant ion temperatures can be reached in a compact, high-field ST. Analysis of these high-ion temperature plasmas is presented, including a summary of confinement, transport and microstability characteristics, and energetic particle instabilities. Recent scenario development activities have focused on establishing diverted H-mode plasmas across a range of toroidal fields and plasma currents, along with scenarios with high non-inductive current fractions. In future operations, beginning in 2025, a 1 MW dual frequency (104/137 GHz) electron cyclotron (EC) system will be installed to enable the study of EC and electron Bernstein wave plasma start-up and current drive. Predictive modelling of the potential performance of these systems is presented.
- 29 August 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (11) , 112020
Open AccessOverview of recent results from the ST40 compact high-field spherical tokamak
ST40 is a compact, high-field ( B T 0 ⩽ 2.1 T ) spherical tokamak (ST) with a mission to expand the physics and technology basis for the ST route to commercial fusion. The ST40 research programme covers confinement and stability; solenoid-free start-up; high-performance operating scenarios; and plasma exhaust. In 2022, ST40 obtained central deuterium ion temperatures of 9.6 ± 0.4 keV , demonstrating for the first time that pilot plant relevant ion temperatures can be reached in a compact, high-field ST. Analysis of these high-ion temperature plasmas is presented, including a summary of confinement, transport and microstability characteristics, and energetic particle instabilities. Recent scenario development activities have focused on establishing diverted H-mode plasmas across a range of toroidal fields and plasma currents, along with scenarios with high non-inductive current fractions. In future operations, beginning in 2025, a 1 MW dual frequency (104/137 GHz) electron cyclotron (EC) system will be installed to enable the study of EC and electron Bernstein wave plasma start-up and current drive. Predictive modelling of the potential performance of these systems is presented.
- Open Access
- 1 August 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (8)
Characterization of diamond and organic scintillation detectors utilizing radiation sources for continuous plasma operation
This paper provides a comprehensive study of neutron calibration methodologies, specifically highlighting the capabilities for n–γ discrimination in diamond and EJ-309, and stilbene scintillation detectors. The calibration process detailed in this study includes pulse height analysis and pulse shape discrimination, relying on the analysis of charge deposition resulting from both γ and neutron interactions. Utilizing 60Co and 252Cf radiation sources, the energy spectra of these sources are obtained. The characterized detectors were used in ST40 experiments and allowed acquiring neutron signal during a plasma shot with good agreement among diamond and scintillation detectors. Then, the diamond detector was cross-calibrated against indium activation foils placed at the same location in proximity to the ST40 during plasma shots: both detectors measured a neutron flux of ≈106 cm−2 s−1 at ≈1 m distance from the tokamak center, and the discrepancy between the diamond detector and the activation foils is ≈25%.
- 1 August 2024
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 95 (8)
Open AccessCharacterization of diamond and organic scintillation detectors utilizing radiation sources for continuous plasma operation
This paper provides a comprehensive study of neutron calibration methodologies, specifically highlighting the capabilities for n–γ discrimination in diamond and EJ-309, and stilbene scintillation detectors. The calibration process detailed in this study includes pulse height analysis and pulse shape discrimination, relying on the analysis of charge deposition resulting from both γ and neutron interactions. Utilizing 60Co and 252Cf radiation sources, the energy spectra of these sources are obtained. The characterized detectors were used in ST40 experiments and allowed acquiring neutron signal during a plasma shot with good agreement among diamond and scintillation detectors. Then, the diamond detector was cross-calibrated against indium activation foils placed at the same location in proximity to the ST40 during plasma shots: both detectors measured a neutron flux of ≈106 cm−2 s−1 at ≈1 m distance from the tokamak center, and the discrepancy between the diamond detector and the activation foils is ≈25%.
- Top Cited PapersOpen Access
- 17 March 2023
- Published by IOP Publishing in Nuclear Fusion
- Vol. 63 (5) , 054002
Achievement of ion temperatures in excess of 100 million degrees Kelvin in the compact high-field spherical tokamak ST40
Ion temperatures of over 100 million degrees Kelvin (8.6 keV) have been produced in the ST40 compact high-field spherical tokamak (ST). Ion temperatures in excess of 5 keV have not previously been reached in any ST and have only been obtained in much larger devices with substantially more plasma heating power. The corresponding fusion triple product is calculated to be n i 0 T i 0 τ E ≈ 6 ± 2 × 10 18 m − 3 keVs . These results demonstrate for the first time that ion temperatures relevant for commercial magnetic confinement fusion can be obtained in a compact high-field ST and bode well for fusion power plants based on the high-field ST.
- 17 March 2023
- Published by IOP Publishing in Nuclear Fusion
- Vol. 63 (5) , 054002
Top Cited PapersOpen AccessAchievement of ion temperatures in excess of 100 million degrees Kelvin in the compact high-field spherical tokamak ST40
Ion temperatures of over 100 million degrees Kelvin (8.6 keV) have been produced in the ST40 compact high-field spherical tokamak (ST). Ion temperatures in excess of 5 keV have not previously been reached in any ST and have only been obtained in much larger devices with substantially more plasma heating power. The corresponding fusion triple product is calculated to be n i 0 T i 0 τ E ≈ 6 ± 2 × 10 18 m − 3 keVs . These results demonstrate for the first time that ion temperatures relevant for commercial magnetic confinement fusion can be obtained in a compact high-field ST and bode well for fusion power plants based on the high-field ST.
- Open Access
- 1 February 2022
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 64 (3) , 035014
Simulating the impact of charge exchange on beam ions in MAST-U
A model for simulating charge exchange (CX) of fast ions with background atoms in magnetically confined fusion plasmas has been implemented in the ASCOT orbit-following code. The model was verified by comparing simulated reaction mean free paths to analytical values across a range of fusion-relevant parameters. ASCOT was used to simulate beam ions slowing down in the presence of CX reactions in a MAST-U target scenario. ASCOT predicts the CX-induced loss of beam power to be 22 % , which agrees to within 15 % with the TRANSP prediction. Due to CX, plasma heating and current drive by beam ions are strongly reduced towards the edge. However, an overall lower but noticeable increase of up to 20 % in current drive is predicted closer to the core. The simulated deposition of fast CX atoms on the wall is concentrated around the outer midplane, with estimated peak power loads of 70–80 kW m−2 on the central poloidal field coils (P5) and the vacuum vessel wall between them. This analysis demonstrates that ASCOT can be used to simulate fast ions in fusion plasmas where CX reactions play a significant role, e.g. in spherical tokamaks and stellarators.
- 1 February 2022
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 64 (3) , 035014
Open AccessSimulating the impact of charge exchange on beam ions in MAST-U
A model for simulating charge exchange (CX) of fast ions with background atoms in magnetically confined fusion plasmas has been implemented in the ASCOT orbit-following code. The model was verified by comparing simulated reaction mean free paths to analytical values across a range of fusion-relevant parameters. ASCOT was used to simulate beam ions slowing down in the presence of CX reactions in a MAST-U target scenario. ASCOT predicts the CX-induced loss of beam power to be 22 % , which agrees to within 15 % with the TRANSP prediction. Due to CX, plasma heating and current drive by beam ions are strongly reduced towards the edge. However, an overall lower but noticeable increase of up to 20 % in current drive is predicted closer to the core. The simulated deposition of fast CX atoms on the wall is concentrated around the outer midplane, with estimated peak power loads of 70–80 kW m−2 on the central poloidal field coils (P5) and the vacuum vessel wall between them. This analysis demonstrates that ASCOT can be used to simulate fast ions in fusion plasmas where CX reactions play a significant role, e.g. in spherical tokamaks and stellarators.
- Open Access
- 1 October 2021
- Published by Elsevier in Computer Physics Communications
- Vol. 267, 108041
Moment-preserving and mesh-adaptive reweighting method for rare-event sampling in Monte-Carlo algorithms
- 1 October 2021
- Published by Elsevier in Computer Physics Communications
- Vol. 267, 108041
Open AccessMoment-preserving and mesh-adaptive reweighting method for rare-event sampling in Monte-Carlo algorithms
- 16 July 2021
- Published by IOP Publishing in Nuclear Fusion
- Vol. 61 (8) , 086026
ASCOT orbit-following simulations of ion cyclotron heating with synthetic fast ion loss diagnostic: a first application to ASDEX Upgrade
- 16 July 2021
- Published by IOP Publishing in Nuclear Fusion
- Vol. 61 (8) , 086026
ASCOT orbit-following simulations of ion cyclotron heating with synthetic fast ion loss diagnostic: a first application to ASDEX Upgrade