Changzhu Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Changzhu Wu has a total of 161 co-authors. Here are the top co-authors by number of shared publications:
- Jian Li
ShanghaiTech University
11 shared publications Shan Wang
University of Southern Denmark
10 shared publicationsRené Hübner
Helmholtz‐Zentrum Dresden ‐ Rossendorf (HZDR) Institute of Ion Beam Physics and Materials Research Dresden Germany
9 shared publications- Zhiyong Sun
College of Biotechnology and Bioengineering Zhejiang University of Technology Hangzhou China
9 shared publications - Henrik Karring
Department of Green Technology, University of Southern Denmark, Odense, Denmark
8 shared publications - Ningning Zhang
Institute of Technical Chemistry, Leibniz University Hannover, Callinstr. 5, 30167 Hannover, Germany
6 shared publications
Latest Publications
- 15 October 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (42) , 29966-29980
Surface Chemistry Shapes Nanoplastic Mixture Responses in Developing Amniote Embryos
Nanoplastics (NPs) are an emerging environmental concern, yet their developmental impacts on terrestrial amniotes and their mixture effects are only beginning to be understood. Using a chicken embryo model, we compared the developmental and molecular effects of negatively charged (PS-COOH), positively charged (PS-NH2), and their equal-component mixture (50 nm). No significant mortality was observed across 0.1 to 10 ppm, whereas the lowest tested concentration (0.1 ppm) impaired growth and brain development without significantly increasing mortality. An IA-informed reference-response comparison showed that mixture effects were generally attenuated relative to reference responses derived from the experimentally tested single-particle treatments. Brain transcriptomic and proteomic analyses revealed distinct surface-chemistry-dependent responses: PS-COOH primarily affected extracellular matrix and glycan-related processes, whereas PS-NH2 altered synaptic, immune, and protein-quality-control pathways. The mixture induced the greatest number of DEGs; this broader omics response does not translate into higher phenotypic toxicity. DIABLO identified treatment-associated RNA-protein covariance, while reference-response comparisons indicated predominantly attenuated molecular responses among statistically supported deviations. Our findings demonstrate that coexposure to oppositely functionalized nanoplastics can reshape developmental and molecular responses during embryonic development.
- 15 October 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (42) , 29966-29980
Surface Chemistry Shapes Nanoplastic Mixture Responses in Developing Amniote Embryos
Nanoplastics (NPs) are an emerging environmental concern, yet their developmental impacts on terrestrial amniotes and their mixture effects are only beginning to be understood. Using a chicken embryo model, we compared the developmental and molecular effects of negatively charged (PS-COOH), positively charged (PS-NH2), and their equal-component mixture (50 nm). No significant mortality was observed across 0.1 to 10 ppm, whereas the lowest tested concentration (0.1 ppm) impaired growth and brain development without significantly increasing mortality. An IA-informed reference-response comparison showed that mixture effects were generally attenuated relative to reference responses derived from the experimentally tested single-particle treatments. Brain transcriptomic and proteomic analyses revealed distinct surface-chemistry-dependent responses: PS-COOH primarily affected extracellular matrix and glycan-related processes, whereas PS-NH2 altered synaptic, immune, and protein-quality-control pathways. The mixture induced the greatest number of DEGs; this broader omics response does not translate into higher phenotypic toxicity. DIABLO identified treatment-associated RNA-protein covariance, while reference-response comparisons indicated predominantly attenuated molecular responses among statistically supported deviations. Our findings demonstrate that coexposure to oppositely functionalized nanoplastics can reshape developmental and molecular responses during embryonic development.
- 13 July 2026
- Published by American Chemical Society (ACS) in ACS Synthetic Biology
Flavin-Decorated Proteins and Bacteria Enable Photoenzymatic Amine Valorisation
The search for more sustainable catalytic methods, such as biocatalysis and photocatalysis, has greatly contributed to a sustainable future of synthetic chemistry. Within photocatalysis, flavin-type heterocycles are powerful tools for oxidative transformations but often suffer from poor water solubility, photostability, and limited reusability. Here, we provide a proof-of-concept strategy to bridge the gap between photocatalysis and biocatalysis through the development of artificial flavin biomolecules. A 7-/8-carboxyflavin derivative was synthesized and covalently attached to protein surfaces via a biocompatible amide coupling reaction, creating an artificial flavin-decorated protein with oxidative properties. This biophotocatalyst operates efficiently in water under mild conditions, enabling the photooxidation of primary amines without external oxidants. It was also integrated into one-pot, sequential cascade reactions with whole-cell biocatalysts to achieve the enantioselective synthesis of (R)-benzoin and chiral secondary alcohols. Furthermore, the flavin photocatalyst was immobilized on the surface of Escherichia coli cells through a similar process, creating a recyclable, heterogeneous cellular photocatalyst. These modified bacteria exhibited high activity in amine oxidation, could be easily recycled, and maintained performance over multiple reaction cycles without evidence of catalyst leaching. Overall, this work establishes a versatile framework for constructing hybrid biophotocatalytic systems and showcases how they can contribute to environmentally sustainable synthesis through reactions in water and catalyst recycling.
- 13 July 2026
- Published by American Chemical Society (ACS) in ACS Synthetic Biology
Flavin-Decorated Proteins and Bacteria Enable Photoenzymatic Amine Valorisation
The search for more sustainable catalytic methods, such as biocatalysis and photocatalysis, has greatly contributed to a sustainable future of synthetic chemistry. Within photocatalysis, flavin-type heterocycles are powerful tools for oxidative transformations but often suffer from poor water solubility, photostability, and limited reusability. Here, we provide a proof-of-concept strategy to bridge the gap between photocatalysis and biocatalysis through the development of artificial flavin biomolecules. A 7-/8-carboxyflavin derivative was synthesized and covalently attached to protein surfaces via a biocompatible amide coupling reaction, creating an artificial flavin-decorated protein with oxidative properties. This biophotocatalyst operates efficiently in water under mild conditions, enabling the photooxidation of primary amines without external oxidants. It was also integrated into one-pot, sequential cascade reactions with whole-cell biocatalysts to achieve the enantioselective synthesis of (R)-benzoin and chiral secondary alcohols. Furthermore, the flavin photocatalyst was immobilized on the surface of Escherichia coli cells through a similar process, creating a recyclable, heterogeneous cellular photocatalyst. These modified bacteria exhibited high activity in amine oxidation, could be easily recycled, and maintained performance over multiple reaction cycles without evidence of catalyst leaching. Overall, this work establishes a versatile framework for constructing hybrid biophotocatalytic systems and showcases how they can contribute to environmentally sustainable synthesis through reactions in water and catalyst recycling.
- Open Access
- 24 June 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Assembly-Line Biosynthesis in Living-Cell Emulsions via Tunable Supramolecular Surface Chemistry
Nature organizes enzymes in micro-compartments to enable efficient biosynthesis, inspiring multienzyme cascades for producing complex molecules. However, practical implementation is often limited by enzyme incompatibility, poor substrate transfer, and inefficient catalyst recycling. Here, we report a living biocatalytic platform that operates as a factory-like assembly line within Pickering emulsions. Tunable supramolecular chemistry is used to graft an oil-derived photocatalyst onto enzyme-overexpressing Escherichia coli ( E. coli ) cells, generating amphiphilic “suprabacteria” that self-assemble at water–oil interfaces and stabilize emulsions. These interfacial suprabacteria accelerate chemoenzymatic and multienzyme cascades, achieving reaction rates up to 45-fold higher than conventional biphasic systems. The platform supports single-step, sequential, and one-pot cascade reactions, including gram-scale benzoin synthesis. Importantly, the dynamic supramolecular linkage enables on-demand dual recycling: either the living-cell conjugate is reused, or the synthetic catalyst is selectively recovered and reattached to fresh cells. This strategy integrates chemical and biological catalysis in a sustainable, scalable platform for future greener industrial biosynthesis.
- 24 June 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessAssembly-Line Biosynthesis in Living-Cell Emulsions via Tunable Supramolecular Surface Chemistry
Nature organizes enzymes in micro-compartments to enable efficient biosynthesis, inspiring multienzyme cascades for producing complex molecules. However, practical implementation is often limited by enzyme incompatibility, poor substrate transfer, and inefficient catalyst recycling. Here, we report a living biocatalytic platform that operates as a factory-like assembly line within Pickering emulsions. Tunable supramolecular chemistry is used to graft an oil-derived photocatalyst onto enzyme-overexpressing Escherichia coli ( E. coli ) cells, generating amphiphilic “suprabacteria” that self-assemble at water–oil interfaces and stabilize emulsions. These interfacial suprabacteria accelerate chemoenzymatic and multienzyme cascades, achieving reaction rates up to 45-fold higher than conventional biphasic systems. The platform supports single-step, sequential, and one-pot cascade reactions, including gram-scale benzoin synthesis. Importantly, the dynamic supramolecular linkage enables on-demand dual recycling: either the living-cell conjugate is reused, or the synthetic catalyst is selectively recovered and reattached to fresh cells. This strategy integrates chemical and biological catalysis in a sustainable, scalable platform for future greener industrial biosynthesis.
- 18 June 2026
- Published by American Chemical Society (ACS) in Biomacromolecules
Grafted-from Polymer Surface Display: A Platform for In Situ Engineering of Robust and Recoverable Biocatalysts
Protein-polymer conjugation and microbial surface display are two dominant strategies for enzyme engineering, yet they have evolved in isolation, restricted by distinct limitations in purification or stability. Here, we bridge this divide by introducing "grafted-from surface display," a platform that enables in situ atom transfer radical polymerization (ATRP) directly on surface-displayed proteins without prior and post purification. Using Escherichia coli displaying a cysteine-engineered benzaldehyde lyase (sBALS174C), we grew thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) polymers that significantly enhanced the surface-displayed enzyme's robustness, retaining >60% activity at 50 °C where unmodified variants lost substantial function. This architecture preserves cell viability and allows for the reversible, temperature-controlled recovery and purification of membrane-bound biocatalysts via simple centrifugation. In a multienzyme cascade with alcohol dehydrogenase, the conjugates achieved a benzoin yield of 15 mM and retained over 80% activity after four recycling cycles. This strategy establishes a facile framework for integrating synthetic polymer chemistry with cellular machinery, creating robust, self-recovering biocatalysts while eliminating the need for laborious protein isolation.
- 18 June 2026
- Published by American Chemical Society (ACS) in Biomacromolecules
Grafted-from Polymer Surface Display: A Platform for In Situ Engineering of Robust and Recoverable Biocatalysts
Protein-polymer conjugation and microbial surface display are two dominant strategies for enzyme engineering, yet they have evolved in isolation, restricted by distinct limitations in purification or stability. Here, we bridge this divide by introducing "grafted-from surface display," a platform that enables in situ atom transfer radical polymerization (ATRP) directly on surface-displayed proteins without prior and post purification. Using Escherichia coli displaying a cysteine-engineered benzaldehyde lyase (sBALS174C), we grew thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) polymers that significantly enhanced the surface-displayed enzyme's robustness, retaining >60% activity at 50 °C where unmodified variants lost substantial function. This architecture preserves cell viability and allows for the reversible, temperature-controlled recovery and purification of membrane-bound biocatalysts via simple centrifugation. In a multienzyme cascade with alcohol dehydrogenase, the conjugates achieved a benzoin yield of 15 mM and retained over 80% activity after four recycling cycles. This strategy establishes a facile framework for integrating synthetic polymer chemistry with cellular machinery, creating robust, self-recovering biocatalysts while eliminating the need for laborious protein isolation.
- Open Access
- 15 June 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 18453
Chemical composition of essential oil from Lavandula dentata L. to control citrus aphids selectively
The green citrus aphid (Aphis spiraecola) is a major pest in Mediterranean citrus orchards, transmits phytoviruses, and shows increasing resistance to synthetic insecticides. This study aimed to evaluate the chemical composition and aphicidal activity of essential oil (EO) from Lavandula dentata and to assess its selectivity toward beneficial insects. EO was extracted by hydrodistillation from leaves and analyzed using gas chromatography–mass spectrometry, yielding 1.8% of the dry biomass. The major constituents were monoterpenes (45.5%) and sesquiterpenes (22.4%), with eucalyptol (12.8%), β-pinene (5.7%), linalool (4.7%), camphene (4.4%), murolan-3,9 (11)-diene-10-peroxy (4.3%), and α-pinene (4.0%) as dominant compounds. The oil exhibited significant contact insecticidal activity against A. spiraecola. After 24 h, LD₅₀ and LD₉₀ values were 6.02 and 23.56 µL mL⁻1, respectively. At 48 h, LD₅₀ decreased to 0.16 µL mL⁻1. and LD₉₀ to 20.02 µL mL⁻1, while at 72 h, values reached 0.07 and 3.39 µL mL⁻1, respectively. Exposure to an LD₉₀ of 20.02 µL mL⁻1 for 48 h on aphids caused no adverse effects on key aphid predators (ladybird beetles, cecidomyiid, and chrysopid larvae) or adult honeybees.
- 15 June 2026
- Published by Springer Nature in Scientific Reports
- Vol. 16 (1) , 18453
Open AccessChemical composition of essential oil from Lavandula dentata L. to control citrus aphids selectively
The green citrus aphid (Aphis spiraecola) is a major pest in Mediterranean citrus orchards, transmits phytoviruses, and shows increasing resistance to synthetic insecticides. This study aimed to evaluate the chemical composition and aphicidal activity of essential oil (EO) from Lavandula dentata and to assess its selectivity toward beneficial insects. EO was extracted by hydrodistillation from leaves and analyzed using gas chromatography–mass spectrometry, yielding 1.8% of the dry biomass. The major constituents were monoterpenes (45.5%) and sesquiterpenes (22.4%), with eucalyptol (12.8%), β-pinene (5.7%), linalool (4.7%), camphene (4.4%), murolan-3,9 (11)-diene-10-peroxy (4.3%), and α-pinene (4.0%) as dominant compounds. The oil exhibited significant contact insecticidal activity against A. spiraecola. After 24 h, LD₅₀ and LD₉₀ values were 6.02 and 23.56 µL mL⁻1, respectively. At 48 h, LD₅₀ decreased to 0.16 µL mL⁻1. and LD₉₀ to 20.02 µL mL⁻1, while at 72 h, values reached 0.07 and 3.39 µL mL⁻1, respectively. Exposure to an LD₉₀ of 20.02 µL mL⁻1 for 48 h on aphids caused no adverse effects on key aphid predators (ladybird beetles, cecidomyiid, and chrysopid larvae) or adult honeybees.
- 12 June 2026
- Published by American Chemical Society (ACS) in ACS ES&T Water
- Vol. 6 (7) , 4397-4412
Charge Matters, but So Does Species: Amphibian Early Development under Exposure to Clean Dialyzed Nanoplastics
- 12 June 2026
- Published by American Chemical Society (ACS) in ACS ES&T Water
- Vol. 6 (7) , 4397-4412
Charge Matters, but So Does Species: Amphibian Early Development under Exposure to Clean Dialyzed Nanoplastics
- Open Access
- 26 May 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (34) , e2267541
A Cholesterol Analogue for Cell‐Surface Enzyme Display
The cell membrane is a prime target for the introduction of novel cellular functionalities, as it is a complex system with many routes for surface modification. Several chemical coating and genetic engineering methods have thus been developed for this purpose. Here, a distinct way to enable enzyme‐binding onto the surface of bacterial cells is explored using biomimetic lipids that integrate within the cell membrane. E. coli cells were equipped with a cholesterol‐based artificial lipid containing a nitrilotriacetic acid (NTA) group which, when loaded with Ni 2+ ions, selectively binds His‐tagged enzymes through affinity interactions. This interaction is stable and selective for tagged proteins including green fluorescent protein, enabling their direct one‐step purification and immobilisation from cell lysates. Furthermore, the process is biocompatible and preserves both intracellular and cell‐surface enzymatic activity. This strategy further enables binding of benzaldehyde lyase or amine transaminase enzymes to the surface of bacterial cells for recyclable single‐step enzymatic reactions. Importantly, it allowed the creation of a single‐cell system for the two‐step cascade reaction from benzyl alcohol to (R) ‐benzoin using both intracellular and surface‐immobilised enzymes. This provides a solid proof of concept for the streamlined development of cascade reaction systems in a single cell through non‐genetic cell surface enzyme immobilisation.
- 26 May 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (34) , e2267541
Open AccessA Cholesterol Analogue for Cell‐Surface Enzyme Display
The cell membrane is a prime target for the introduction of novel cellular functionalities, as it is a complex system with many routes for surface modification. Several chemical coating and genetic engineering methods have thus been developed for this purpose. Here, a distinct way to enable enzyme‐binding onto the surface of bacterial cells is explored using biomimetic lipids that integrate within the cell membrane. E. coli cells were equipped with a cholesterol‐based artificial lipid containing a nitrilotriacetic acid (NTA) group which, when loaded with Ni 2+ ions, selectively binds His‐tagged enzymes through affinity interactions. This interaction is stable and selective for tagged proteins including green fluorescent protein, enabling their direct one‐step purification and immobilisation from cell lysates. Furthermore, the process is biocompatible and preserves both intracellular and cell‐surface enzymatic activity. This strategy further enables binding of benzaldehyde lyase or amine transaminase enzymes to the surface of bacterial cells for recyclable single‐step enzymatic reactions. Importantly, it allowed the creation of a single‐cell system for the two‐step cascade reaction from benzyl alcohol to (R) ‐benzoin using both intracellular and surface‐immobilised enzymes. This provides a solid proof of concept for the streamlined development of cascade reaction systems in a single cell through non‐genetic cell surface enzyme immobilisation.
- Open Access
- 26 May 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (34)
A Cholesterol Analogue for Cell‐Surface Enzyme Display
The cell membrane is a prime target for the introduction of novel cellular functionalities, as it is a complex system with many routes for surface modification. Several chemical coating and genetic engineering methods have thus been developed for this purpose. Here, a distinct way to enable enzyme‐binding onto the surface of bacterial cells is explored using biomimetic lipids that integrate within the cell membrane. E. coli cells were equipped with a cholesterol‐based artificial lipid containing a nitrilotriacetic acid (NTA) group which, when loaded with Ni 2+ ions, selectively binds His‐tagged enzymes through affinity interactions. This interaction is stable and selective for tagged proteins including green fluorescent protein, enabling their direct one‐step purification and immobilisation from cell lysates. Furthermore, the process is biocompatible and preserves both intracellular and cell‐surface enzymatic activity. This strategy further enables binding of benzaldehyde lyase or amine transaminase enzymes to the surface of bacterial cells for recyclable single‐step enzymatic reactions. Importantly, it allowed the creation of a single‐cell system for the two‐step cascade reaction from benzyl alcohol to (R) ‐benzoin using both intracellular and surface‐immobilised enzymes. This provides a solid proof of concept for the streamlined development of cascade reaction systems in a single cell through non‐genetic cell surface enzyme immobilisation.
- 26 May 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (34)
Open AccessA Cholesterol Analogue for Cell‐Surface Enzyme Display
The cell membrane is a prime target for the introduction of novel cellular functionalities, as it is a complex system with many routes for surface modification. Several chemical coating and genetic engineering methods have thus been developed for this purpose. Here, a distinct way to enable enzyme‐binding onto the surface of bacterial cells is explored using biomimetic lipids that integrate within the cell membrane. E. coli cells were equipped with a cholesterol‐based artificial lipid containing a nitrilotriacetic acid (NTA) group which, when loaded with Ni 2+ ions, selectively binds His‐tagged enzymes through affinity interactions. This interaction is stable and selective for tagged proteins including green fluorescent protein, enabling their direct one‐step purification and immobilisation from cell lysates. Furthermore, the process is biocompatible and preserves both intracellular and cell‐surface enzymatic activity. This strategy further enables binding of benzaldehyde lyase or amine transaminase enzymes to the surface of bacterial cells for recyclable single‐step enzymatic reactions. Importantly, it allowed the creation of a single‐cell system for the two‐step cascade reaction from benzyl alcohol to (R) ‐benzoin using both intracellular and surface‐immobilised enzymes. This provides a solid proof of concept for the streamlined development of cascade reaction systems in a single cell through non‐genetic cell surface enzyme immobilisation.
Responsive Emulsions Enabled by Supramolecular Polymers for Recyclable Biocatalysis
Emulsion biocatalysis harnesses liquid–liquid interfaces to facilitate mass transfer for achieving efficient biocatalysis. However, it has been a great challenge in recycling the emulsions in the downstream process. Here, we present a supramolecular approach to design a responsive emulsion for recyclable biocatalysis. Crown ether acrylate monomers are copolymerized with N ‐isopropylacrylamide to yield amphiphilic supramolecular polymer as emulsifiers, which further enable to form robust emulsions, accommodating both isolated enzymes and whole‐cell catalysts and supporting single‐step transformations as well as multi‐enzymatic cascades, with performance that surpasses conventional biphasic systems. Importantly, leveraging the reversible crown‐ether/secondary‐ammonium recognition, the introduction of a complementary dibenzylammonium guest triggers supramolecular cross‐linking, enabling straightforward recovery and reuse of both emulsifier and catalyst with minimal activity loss, and subsequent mild pH modulation de‐complexes the host–guest assembly, resulting in a reversibly switching system between emulsion and two‐phase states. Additionally, Escherichia coli overexpressing BAL retains 80% of its initial activity over three consecutive cycles in this responsive emulsion. Therefore, our findings establish supramolecular polymer–stabilized emulsions as a versatile, recyclable platform for biocatalysis, providing a general strategy that bridges supramolecular polymer design with green chemical synthesis and offering strong potential for sustainable industrial chemical synthesis.
Responsive Emulsions Enabled by Supramolecular Polymers for Recyclable Biocatalysis
Emulsion biocatalysis harnesses liquid–liquid interfaces to facilitate mass transfer for achieving efficient biocatalysis. However, it has been a great challenge in recycling the emulsions in the downstream process. Here, we present a supramolecular approach to design a responsive emulsion for recyclable biocatalysis. Crown ether acrylate monomers are copolymerized with N ‐isopropylacrylamide to yield amphiphilic supramolecular polymer as emulsifiers, which further enable to form robust emulsions, accommodating both isolated enzymes and whole‐cell catalysts and supporting single‐step transformations as well as multi‐enzymatic cascades, with performance that surpasses conventional biphasic systems. Importantly, leveraging the reversible crown‐ether/secondary‐ammonium recognition, the introduction of a complementary dibenzylammonium guest triggers supramolecular cross‐linking, enabling straightforward recovery and reuse of both emulsifier and catalyst with minimal activity loss, and subsequent mild pH modulation de‐complexes the host–guest assembly, resulting in a reversibly switching system between emulsion and two‐phase states. Additionally, Escherichia coli overexpressing BAL retains 80% of its initial activity over three consecutive cycles in this responsive emulsion. Therefore, our findings establish supramolecular polymer–stabilized emulsions as a versatile, recyclable platform for biocatalysis, providing a general strategy that bridges supramolecular polymer design with green chemical synthesis and offering strong potential for sustainable industrial chemical synthesis.
- 6 December 2025
- Published by Wiley in Angewandte Chemie
Photoenzymatic Aliphatic C─Br Activation for Enantioselective Synthesis of γ‐Stereogenic Nitriles from Alkenes
Enzymatic strategies for direct cyano group incorporation remain underdeveloped, creating synthetic bottlenecks for accessing chiral nitrile derivatives in pharmaceuticals and functional materials. Herein, we have developed a photoenzymatic γ‐hydrocyanation strategy that addresses this gap. The system demonstrates remarkable efficiency in activating the challenging aliphatic C─Br bond of bromoacetonitrile through engineered ene‐reductase catalysis. Upon visible light excitation, the reduced flavin cofactor generates cyanomethyl radicals that are spatially confined and precisely oriented within the enzyme's active site for efficient coupling with α‐methylstyrenes. This synergistic photoenzymatic system also demonstrates distinct stereochemical control, with the engineered active site simultaneously governing radical generation and subsequent enantioselective hydrogen atom transfer to afford a large range of γ‐stereogenic nitriles in up to 93% yield, 94% ee – a transformation that poses considerable challenges for traditional transition metal catalysis. Beyond providing a robust platform for asymmetric cyanoalkylation, this work significantly advances photoenzymatic catalysis by establishing unactivated alkyl bromides as viable radical precursors for selective bond formations.
- 6 December 2025
- Published by Wiley in Angewandte Chemie
Photoenzymatic Aliphatic C─Br Activation for Enantioselective Synthesis of γ‐Stereogenic Nitriles from Alkenes
Enzymatic strategies for direct cyano group incorporation remain underdeveloped, creating synthetic bottlenecks for accessing chiral nitrile derivatives in pharmaceuticals and functional materials. Herein, we have developed a photoenzymatic γ‐hydrocyanation strategy that addresses this gap. The system demonstrates remarkable efficiency in activating the challenging aliphatic C─Br bond of bromoacetonitrile through engineered ene‐reductase catalysis. Upon visible light excitation, the reduced flavin cofactor generates cyanomethyl radicals that are spatially confined and precisely oriented within the enzyme's active site for efficient coupling with α‐methylstyrenes. This synergistic photoenzymatic system also demonstrates distinct stereochemical control, with the engineered active site simultaneously governing radical generation and subsequent enantioselective hydrogen atom transfer to afford a large range of γ‐stereogenic nitriles in up to 93% yield, 94% ee – a transformation that poses considerable challenges for traditional transition metal catalysis. Beyond providing a robust platform for asymmetric cyanoalkylation, this work significantly advances photoenzymatic catalysis by establishing unactivated alkyl bromides as viable radical precursors for selective bond formations.