AAArdy Arsyad

Ardy Arsyad

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ardy Arsyad has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Characteristics of Liquefaction in Embankment Models Reinforced with Hybrid Piles

    by Muhammad Yunus, Achmad B. Muhiddin, Tri Harianto, Ardy Arsyad

    Liquefaction of saturated loose sand poses a serious threat to the stability of embankments subjected to seismic loading. This study aims to evaluate the effectiveness of an innovative and environmentally friendly liquefaction mitigation technique using hybrid piles (HPs) that combine structural stiffness and vertical drainage functions. A series of 1-g shaking table tests was conducted on embankment models constructed over saturated sand with an initial relative density of 40%. The models were subjected to repeated sinusoidal seismic excitations with peak ground accelerations (PGA) ranging from 0.3 g to 0.5 g. The performance of the HPs system was assessed by analyzing cone penetration resistance, acceleration response, excess pore water pressure ratio, changes in relative density and void ratio, and surface settlement. The experimental results demonstrate that the HPs system significantly enhances soil densification and stiffness, as indicated by a 1.3–3.0-fold increase in penetration resistance and a relative density increase of up to 7–10% in deeper layers. The HPs system reduced the maximum excess pore water pressure ratio by up to 16.26%, thereby delaying liquefaction onset and enhancing pore pressure dissipation under repeated seismic loading. In addition, settlement was reduced by approximately 37–42% compared with the unreinforced model across all PGA levels. The novelty of this study lies in the integrated use of locally sourced timber and prefabricated vertical drains within a single reinforcement element, providing combined mechanical reinforcement and drainage enhancement. These findings confirm that HPs offer a sustainable and effective solution for mitigating liquefaction and controlling deformation in embankment foundations under seismic conditions.

  • Seismic amplification, ground deformation, and damage in the 2021 Mamuju–Majene earthquake

    by Ardy Arsyad, Muhammad Asyhari, Mufidah Azmi Kaharuddin

    The 2021 Mamuju–Majene earthquake (Mw 6.2) caused extensive structural damage in Mamuju. This study assessed the building damage distribution across the city of Mamuju using the damage index (DI) of the European Macroseismic Scale (EMS-98) and analysed its correlation with seismic amplification and ground deformation. The site response analysis utilised the Vs30 of multichannel analysis of surface wave surveys, while seismic amplification factors were calculated through one-dimensional site response analysis. In addition, interferometric synthetic aperture radar (InSAR) analysis was employed to assess ground deformation. The findings reveal that short-period spectral amplification (0.2 s) and construction quality were the dominant factors in structural failures, particularly affecting low-rise buildings (1–3 storeys). In contrast, long-period amplification (1.0 s) exhibited a weaker correlation with the DI, likely due to the limited number of mid- and high-rise structures in the study area. While evidence of liquefaction was observed, its overall impact on building damage was less significant. The integration of InSAR-derived ground deformation, geotechnical site response analysis, and field-based damage data proved to be highly effective for post-earthquake forensic assessment. This combined framework enabled the simultaneous evaluation of seismic amplification and permanent ground deformation, offering a more holistic understanding of damage mechanisms than conventional single-discipline approaches.

  • Open Access

    Predicting CPT-based shallow foundation design adequacy using machine learning

    by Ardy Arsyad, Mohd Nur Asmawisham Alel, Patrick Kenneth Widarta, Fidya Fattimiyah Azzahra, Deniel Edyson Makadanan


  • Open Access

    Soil Reinforcement using Waterglass and Sulfuric Acid with Injection Grouting Method

    by Irwan, Abdul Rachman Djamaluddin, Achmad Bakri Muhiddin, Ardy Arsyad

    A common problem often encountered in infrastructure development, especially in tunnelling projects, involves non-cohesive soils with high groundwater levels. In tunnelling projects, the existence of non-cohesive soil is very susceptible to collapse, hindering work and even causing loss of life and damage to buildings around the construction area. To prevent such a non-cohesive soil collapse, a barrier or temporary wall is needed for the jacking installation to be carried out safely. An efficient method to achieve this is temporary reinforcement with the injection grouting method using waterglass and sulfuric acid as activators. Waterglass and sodium silicate are widely utilized in construction. This study deploys an experimental approach with two testing concepts to obtain the composition of grout materials. The first test involves simulating tunnelling on unsaturated sandy soil, while the second test is carried out on saturated sandy soil to simulate high groundwater level conditions. The analysis was conducted based on the characteristics of the sandy soil collapse zone, using parameters, such as the coefficient of permeability, direct shear test results, soil density, and index properties. The test was carried out using grouting injection with waterglass and sulfuric acid, which proved effective, since they formed a gel layer that prevents the collapse of non-cohesive soil, even under high groundwater level conditions. The novelty of this study lies in the combination of waterglass and sulfuric acid with an optimal composition with the change to gel faster to improve time efficiency during construction.


  • Open Access

    Machine Learning-Enhanced InSAR for Landslide Mapping: Differentiating Landslides from Ordinary Ground Movements

    by Ardy Arsyad

    Landslide inventory mapping over large, remote, and inaccessible areas remains a significant challenge due to the limitations of traditional field-based methods. Satellite-based InSAR (Interferometric Synthetic Aperture Radar) technology offers a viable solution by enabling the detection of surface displacements with millimeter-level precision, providing spatially extensive coverage of potentially landslide-prone areas. However, the accuracy of landslide detection using InSAR data can be compromised by the difficulty of distinguishing landslides from other types of surface deformation, such as subsidence, natural settlement, or deforestation, which can mimic landslide behavior in InSAR data. To address these challenges, we propose a machine learning-based approach that integrates InSAR-derived displacement time-series data with advanced pattern recognition techniques to identify and classify landslides, distinguishing them from ordinary ground movements. The methodology combines the high spatial and temporal resolution of InSAR with machine learning algorithms to recognize the distinctive features of landslides, such as sudden, non-linear displacements, velocity patterns, and deformation history. Feature engineering plays a crucial role, as key features like displacement rate, time-series patterns, and spatial characteristics (e.g., slope and curvature) are extracted from InSAR data to train machine learning models. These models can learn to differentiate between landslides and other ground movements by recognizing underlying patterns specific to landslide behavior. Supervised learning techniques are employed using labeled data (known landslide locations) to train models that can classify landslides accurately, even in areas with limited prior field data. In cases where labeled data is sparse, unsupervised learning techniques, such as clustering and anomaly detection, are applied to identify unusual displacement patterns that might indicate landslides. These models provide valuable insights into regions where landslides may occur, helping to distinguish between true landslide events and other non-landslide related surface changes. By integrating InSAR with machine learning-driven landslide pattern recognition, this approach enhances the accuracy and efficiency of landslide inventory mapping, particularly in large and remote areas where traditional field assessments are impractical. This methodology offers a scalable solution for early landslide detection, risk assessment, and hazard mapping. We discuss the potential benefits, challenges, and future directions of this approach, highlighting its applicability in diverse geographical settings and its role in advancing landslide monitoring and management strategies.

  • Open Access

    Seismic Performance of Reinforced Concrete Buildings in the 2021 Mamuju-Majene Earthquake Mw. 6.2, Sulawesi Indonesia

    by Ardy Arsyad, Muhammad Asyhari, Mufidatul Azmi Kaharuddin

    The seismic performance of RC buildings in Mamuju in West Sulawesi of Indonesia during the 2021 Mamuju-Majene earthquake is examined. Despite the earthquake's recorded acceleration being just 0.26 g, or 25% of the predicted acceleration (1.027 g), it has resulted in the collapse of many RC buildings across the city of Mamuju. We conducted a post-earthquake investigation to uncover the mechanism of collapsing RC buildings, with the aim of learning lessons and gaining insights for improvement in RC building design. Extensive geotechnical and geophysical investigations reveal the ground motion in the city reached 0.68 g, or about 66% of the anticipated ground motion specified for the city of Mamuju on the provision of the Indonesia Code (SNI 1726-2019). This observation suggests that the traditional design of the current RC buildings may perform seismically poorly. Therefore, elastic linear modal analysis and non-linear static and dynamic analysis were conducted to uncover the failure process of the RC building during the earthquake. The results reveal that the collapse of the RC building starts with the formation of plastic hinges at the column members on the ground floor, whereas the column members on the first and second levels remain in an elastic state. Under these circumstances, the RC building's roof displacement exceeded the critical displacement for collapse prevention. For future prevention, a revised structural design has been suggested to enhance the seismic resistance of the RC building with target performance following the Indonesia Code SNI 1726-2019. Increasing the cross-section area of the column members of RC building over a fixed base foundation can result in a more rigid structure and a lower inter-story drift ratio.


  • Landslide Susceptibility Mapping for Road Corridors by using a Combined Interferometry SAR and Machine Learning Techniques

    by Ardy Arsyad

    Landslides comprise about 42% of the entire natural hazards in Indonesia. Together with floods, landslides have claimed one-third of the annual e | ORAL