Giuseppe Caputo

The inclusion of fluorescent molecules within the pores of an inorganic host system ensures an outstanding improvement of stability against photo oxidation under different experimental conditions.

Metal-free dye molecules for dye-sensitized solar cells application can avoid some of the typical drawbacks of common metal-based sensitizers, that are high production costs, relatively low molar extinction coefficient in the visible region, limited availability of precursors, and waste disposal issues. Recently we have proposed an innovative organic dye based on a simple hemi-squaraine molecule (CT1). In the present work, the effect of the sensitization time of the TiO₂photoelectrode in the dye solution is studied with the aim of optimizing the performance of CT1-based DSCs. Moreover, the addition of the chenodeoxycholic acid (CDCA) as coadsorbent in the dye solution at different concentrations is investigated. Both CT1-sensitized mesoporous TiO₂photoanodes and complete solar cells have been fully characterized in their electrical and absorption properties. We have found that the best photoconversion performances are obtained with 1 hour of impregnation time and a 1 mM CDCA concentration. The very fast kinetics in dye adsorption, with optimal sensitization steps almost 15 times faster than conventional Ru-based sensitizers, confirms the theoretical predictions and indicates a strong interaction of the semisquaric acid group with the anatase surface. This result suggests that this small molecule can be a promising sensitizer even in a continuous industrial process.

A simple hemi-squaraine dye (CT1) has been studied as a TiO₂ sensitizer for application in dye sensitized solar cells (DSCs) by means of a combined experimental and theoretical investigation. This molecule is a prototype dye presenting an innovative anchoring group: the squaric acid moiety. Ab initio calculations based on Density Functional Theory (DFT) predict that this acid spontaneously deprotonates at the anatase (101) surface forming chemical bonds that are stronger than the ones formed by other linkers (e.g. cathecol and isonicotinic acid). Moreover an analysis of the electronic structure of the hybrid interface reveals the formation of a type II heterostructure ensuring adiabatic electron transfer from the molecule to the oxide. DSCs containing hemi-squaraine dyes were assembled, characterized and their performances compared to state of the art cells. Experimental results (large incident photon-to-electron conversion efficiency and an efficiency of 3.54%) confirmed the theoretical prediction that even a simple hemi-squaraine is an effective sensitizer for TiO₂. Our study paves the way to the design of more efficient sensitizers based on a squaric acid linker and specifically engineered to absorb light in a larger part of the visible range.

Highly bright and photostable cyanine dye‐doped silica nanoparticles, IRIS Dots, are developed, which can efficiently label human mesenchymal stem cells (hMSCs). The application procedure used to label hMSCs is fast (2 h), the concentration of IRIS Dots for efficient labeling is low (20 μg mL⁻¹), and the labeled cells can be visualized by flow cytometry, confocal microscopy, and transmission electron microscopy. Labeled hMSCs are unaffected in their viability and proliferation, as well as stemness surface marker expression and differentiation capability into osteocytes. Moreover, this is the first report that shows nonfunctionalized IRIS Dots can discriminate between live and early‐stage apoptotic stem cells (both mesenchymal and embryonic) through a distinct external cell surface distribution. On the basis of biocompatibility, efficient labeling, and apoptotic discrimination potential, it is suggested that IRIS Dots can serve as a promising stem cell tracking agent.

Background and methods: Nanoparticles engineered to carry both a chemotherapeutic drug and a sensitive imaging probe are valid tools for early detection of cancer cells and to monitor the cytotoxic effects of anticancer treatment simultaneously. Here we report on the effect of size (10–30 nm versus 50 nm), type of material (mesoporous silica versus polystyrene), and surface charge functionalization (none, amine groups, or carboxyl groups) on biocompatibility, uptake, compartmentalization, and intracellular retention of fluorescently labeled nanoparticles in cultured human ovarian cancer cells. We also investigated the involvement of caveolae in the mechanism of uptake of nanoparticles. Results: We found that mesoporous silica nanoparticles entered via caveolae-mediated endocytosis and reached the lysosomes; however, while the 50 nm nanoparticles permanently resided within these organelles, the 10 nm nanoparticles soon relocated in the cytoplasm. Naked 10 nm mesoporous silica nanoparticles showed the highest and 50 nm carboxyl-modified mesoporous silica nanoparticles the lowest uptake rates, respectively. Polystyrene nanoparticle uptake also occurred via a caveolae-independent pathway, and was negatively affected by serum. The 30 nm carboxyl-modified polystyrene nanoparticles did not localize in lysosomes and were not toxic, while the 50 nm amine-modified polystyrene nanoparticles accumulated within lysosomes and eventually caused cell death. Ovarian cancer cells expressing caveolin-1 were more likely to endocytose these nanoparticles. Conclusion: These data highlight the importance of considering both the physicochemical characteristics (ie, material, size and surface charge on chemical groups) of nanoparticles and the biochemical composition of the cell membrane when choosing the most suitable nanotheranostics for targeting cancer cells.

Bright photoluminescent mesostructured silica nanoparticles were synthesized by the incorporation of fluorescent cyanine dyes into the channels of MCM-41 mesoporous silica. Cyanine molecules were introduced into MCM-41 nanoparticles by physical adsorption and covalent grafting. Several photoluminescent nanoparticles with different organic loadings have been synthesized and characterized by X-ray powder diffraction, high resolution transmission electron microscopy and nitrogen physisorption porosimetry. A detailed photoluminescence study with the analysis of fluorescence lifetimes was carried out to elucidate the cyanine molecules distribution within the pores of MCM-41 nanoparticles and the influence of the encapsulation on the photoemission properties of the guests. The results show that highly stable photoluminescent hybrid materials with interesting potential applications as photoluminescent probes for diagnostics and imaging can be prepared by both methods.

Peer reviewed article authored by (Ekkapongpisit M, Giovia A, Nicotra G, Ozzano M, Caputo G, Isidoro C). Read article or submit your manuscript for publishing.

The N-heterocyclic carbene (NHC) precursor, 1-(2-aminoethyl)-3-methylimidazolium nitrate, [NH₂(CH₂)₂imMe)]NO₃ ([3][NO₃]) reacted with Ag₂CO₃ in dimethyl sulfoxide readily yielding a Ag(I)-(NHC-NH₂) complex presenting limited stability in solution. The in situcarbene transfer reaction of the latter with [Au(tht)Cl] afforded the first example of a dinuclear gold(I) complex [Au₂(NH₂(CH₂)₂imMe)₂][NO₃]₂ ([5][NO₃]₂) bearing a primary amino-functionalized NHC ligand. The complex has been characterized by NMR, mass spectrometry, X-ray crystallography and cyclic voltammetry; the electrochemical behaviour and photophysical properties of [5][NO₃]₂ have been also investigated and the experimental data have been compared with density functional theory (DFT) and Time Dependent (TDDFT) calculations. Single-crystal structural studies showed that the Au(I)-carbene compound contains dinuclear (AuL)₂ cations in which pairs of gold(I) centres are linked by a pair of bridging ligands, with a Au⋯Au aurophilic contact of 3.2332(17) Å that is maintained in solution as documented by the DFT calculations. Complex [5][NO₃]₂ is photoluminescent in solution at room temperature and the high energy emission peak at 410 nm is remarkably shifted with respect to the absorption band centered at 260 nm.