Yi Zhou
Yi Zhou has a total of 49 co-authors. Here are the top co-authors by number of shared publications:
- Hongfan Hu
Petrochina Petrochemical Research Institute, Petrochina Company Limited, Beijing 102206, China
6 shared publications - Shixuan Xin
Provincial Key Laboratory of Polyolefin New Materials, College of Chemistry & Chemical Engineering, The Northeast Petroleum University, Daqing 163318, China
6 shared publications - Ziqiang Shao
Engineering Research Center of Cellulose and Its Derivatives, School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China
6 shared publications - Guoliang Mao
College of Chemistry and Chemical Engineering, Northeast Petroleum University, Daqing 163318, China
5 shared publications - Jie Wei
Beijing Engineering Research Center of Cellulose and Its Derivatives, School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, P. R. China
4 shared publications - Huashu Li
Petrochina Petrochemical Research Institute, Petrochina Company Limited, Beijing 102206, China
3 shared publications
Latest Publications
- Open Access
Recent Advances in Coordination–Insertion Copolymerization of Ethylene with Polar Monomers Catalyzed with Pd and Ni Complexes
The incorporation of polar functional groups into polyethylene (PE) chains at controlled concentrations enables tailored multi-functionality, manifesting as printability enhancement, improved dyeability, and enhanced blending compatibility with diverse polymeric materials. The most effective way to incorporate polar monomers into the PE macromolecules is the transition metal-mediated coordination–insertion copolymerization of ethylene with polar monomers. However, the Lewis basic heteroatoms (N, O, S, P, etc.) in polar monomers are prone to strongly coordinate to the catalytic center, resulting in irreversible catalyst deactivation. Owing to the nature of tolerance to Lewis basic functionalities, rationally designed Pd and Ni complexes have proven to catalyze direct coordination polymerization of ethylene with polar monomers, which opened a practical way to prepare functionalized polyethylenes (F-PEs). In this context, we summarize the recent advances of the Pd and Ni complexes catalyzed copolymerization of ethylene with various polar monomers, especially focused on those commercial polar monomer feedstocks. In addition, the effects of metal, ligand structural modification, and additives regulation on the catalytic performances were analyzed in detail. Some key ideas on the salient aspects of the catalyst are presented, and the challenges and prospects of Pd and Ni catalysts in the polar monomer copolymerization problems are also discussed.
Open AccessRecent Advances in Coordination–Insertion Copolymerization of Ethylene with Polar Monomers Catalyzed with Pd and Ni Complexes
The incorporation of polar functional groups into polyethylene (PE) chains at controlled concentrations enables tailored multi-functionality, manifesting as printability enhancement, improved dyeability, and enhanced blending compatibility with diverse polymeric materials. The most effective way to incorporate polar monomers into the PE macromolecules is the transition metal-mediated coordination–insertion copolymerization of ethylene with polar monomers. However, the Lewis basic heteroatoms (N, O, S, P, etc.) in polar monomers are prone to strongly coordinate to the catalytic center, resulting in irreversible catalyst deactivation. Owing to the nature of tolerance to Lewis basic functionalities, rationally designed Pd and Ni complexes have proven to catalyze direct coordination polymerization of ethylene with polar monomers, which opened a practical way to prepare functionalized polyethylenes (F-PEs). In this context, we summarize the recent advances of the Pd and Ni complexes catalyzed copolymerization of ethylene with various polar monomers, especially focused on those commercial polar monomer feedstocks. In addition, the effects of metal, ligand structural modification, and additives regulation on the catalytic performances were analyzed in detail. Some key ideas on the salient aspects of the catalyst are presented, and the challenges and prospects of Pd and Ni catalysts in the polar monomer copolymerization problems are also discussed.
- Open Access
The Effects of Preparation Methods and Internal Electron Donors on Ziegler-Natta Catalyst Performance and Polypropylene Properties
Ziegler-Natta (Z-N) catalysts for propylene polymerization were prepared in situ using dibutyl phthalate (DNBP) or 9,9-bis(methoxymethyl)fluorene (BMMF) as internal electron donors (IDs) by treating the support precursors (Mg(OEt)2 or MgCl2·2.5EtOH) or MgCl2 complex solutions with TiCl4 respectively. In this study, eight Z-N catalysts containing two types of IDs were prepared via different preparation routes and systematically characterized with modern analytical techniques. The results indicated that, even with the same IDs, the catalysts prepared by different methods exhibited significant differences in chemical composition, particle size distribution, catalytic activity and stereoselectivity. The properties of polypropylene (PP) were largely influenced by the preparation route of the catalysts. Particularly, the catalysts obtained by the reprecipitation method showed the highest catalytic activity and the smallest MgCl2 particle size. The distribution of stereoselective active centers in the catalysts was simultaneously affected by the preparation method and the type of IDs. In addition, the melting point (Tm) of PP could be used as an effective indicator to evaluate the relative content of the highly isotactic active centers in the catalysts. This study provides valuable insights into the rational design of Z-N catalysts for propylene polymerization, highlighting the critical role of the preparation methodology in tailoring the catalyst properties and active center distribution.
Open AccessThe Effects of Preparation Methods and Internal Electron Donors on Ziegler-Natta Catalyst Performance and Polypropylene Properties
Ziegler-Natta (Z-N) catalysts for propylene polymerization were prepared in situ using dibutyl phthalate (DNBP) or 9,9-bis(methoxymethyl)fluorene (BMMF) as internal electron donors (IDs) by treating the support precursors (Mg(OEt)2 or MgCl2·2.5EtOH) or MgCl2 complex solutions with TiCl4 respectively. In this study, eight Z-N catalysts containing two types of IDs were prepared via different preparation routes and systematically characterized with modern analytical techniques. The results indicated that, even with the same IDs, the catalysts prepared by different methods exhibited significant differences in chemical composition, particle size distribution, catalytic activity and stereoselectivity. The properties of polypropylene (PP) were largely influenced by the preparation route of the catalysts. Particularly, the catalysts obtained by the reprecipitation method showed the highest catalytic activity and the smallest MgCl2 particle size. The distribution of stereoselective active centers in the catalysts was simultaneously affected by the preparation method and the type of IDs. In addition, the melting point (Tm) of PP could be used as an effective indicator to evaluate the relative content of the highly isotactic active centers in the catalysts. This study provides valuable insights into the rational design of Z-N catalysts for propylene polymerization, highlighting the critical role of the preparation methodology in tailoring the catalyst properties and active center distribution.
- Open Access
Advances in Half-Sandwich Rare-Earth Catalysts for Conjugated Dienes Polymerization
Polybutadiene (PB) and polyisoprene (PI) rubbers are indispensable synthetic elastomeric materials widely used in tires, footwear, hose, belts, sealants, electricity, construction, and other applications. Nowadays, PB and PI elastomers are produced from butadiene (BD) and isoprene (IP) monomers via transition-metal-mediated coordination polymerization. Transition metal catalytic systems consist of a precise characteristic structural unit at the molecular level: well known as “single-site catalysts” (SSCs). These have experienced a revolutionary advance in the recently developed conjugated dienes synthetic rubber method. Among the SSCs, a class of rare-earth, metal-centered half-sandwich molecule has been identified as a high-performance catalytic system for conjugated dienes polymerization. These novel half-sandwich rare-earth (HSRE) catalytic systems exhibit several irreplaceable advantages compared with the conventional Ziegler–Natta-type catalytic systems. These HSRE catalytic systems can create novel conjugated diene rubbers (CDRs) with high catalytic reactivity, high stereoselectivity, an adjustable polymer chain microstructure, and high molecular weights and are considered to be the next generation of ecofriendly and economic catalytic systems for industrial applications. This paper delivers a concise review of some important synthetic methods for representative HSRE complexes with characteristic structures and of the utilization of some HSRE catalytic systems for the preparation of high-performance CDRs, especially highly stereoregular PI and PB materials.
Open AccessAdvances in Half-Sandwich Rare-Earth Catalysts for Conjugated Dienes Polymerization
Polybutadiene (PB) and polyisoprene (PI) rubbers are indispensable synthetic elastomeric materials widely used in tires, footwear, hose, belts, sealants, electricity, construction, and other applications. Nowadays, PB and PI elastomers are produced from butadiene (BD) and isoprene (IP) monomers via transition-metal-mediated coordination polymerization. Transition metal catalytic systems consist of a precise characteristic structural unit at the molecular level: well known as “single-site catalysts” (SSCs). These have experienced a revolutionary advance in the recently developed conjugated dienes synthetic rubber method. Among the SSCs, a class of rare-earth, metal-centered half-sandwich molecule has been identified as a high-performance catalytic system for conjugated dienes polymerization. These novel half-sandwich rare-earth (HSRE) catalytic systems exhibit several irreplaceable advantages compared with the conventional Ziegler–Natta-type catalytic systems. These HSRE catalytic systems can create novel conjugated diene rubbers (CDRs) with high catalytic reactivity, high stereoselectivity, an adjustable polymer chain microstructure, and high molecular weights and are considered to be the next generation of ecofriendly and economic catalytic systems for industrial applications. This paper delivers a concise review of some important synthetic methods for representative HSRE complexes with characteristic structures and of the utilization of some HSRE catalytic systems for the preparation of high-performance CDRs, especially highly stereoregular PI and PB materials.
- Open Access
Novel High-Efficiency Single-Site Rare Earth (RE) Catalyst System for Isoprene Polymerization
Bis-(o-dipheylphosphinophenyl)amine, a tridentate (PNP) chelating ligand, and several of their Rare Earth (RE) metal complexes, [bis-(o-dipheylphosphinophenyl)amido]-RER2, {[(C6H5)2P-o-(C6H4)]2NMR2 (R = -CH2-o-(C6H4)NMe2: M = Y, 1; Nd, 2; Gd, 3;), are prepared in high yields. When activated with the strong Lewis acid MMAO-7, all these complexes exhibit catalytic activity toward the polymerization of isoprene (IP) in non-protic hydrocarbons. While the Nd complex (2) showed moderate activity and stereoselectivity, the Y and Gd complexes (1 and 3) exhibited extremely high catalytic efficiency in IP homo-polymerization, and produced polyisoprene rubber (PI) with 95% to over 99% cis-1,4 stereoselectivity and narrow polydispersity indices (<2.0). Moreover, under industrially relevant conditions, complex 3 can catalyze IP to produce ultrahigh molecular weight PI (UHMW-PI, MW up to 1200–2600 kg/mol) rubber with a very narrow polydispersity index (PDI ca. 1.1–1.6), a high-performance elastomeric material mimic of natural rubber (NR).
Open AccessNovel High-Efficiency Single-Site Rare Earth (RE) Catalyst System for Isoprene Polymerization
Bis-(o-dipheylphosphinophenyl)amine, a tridentate (PNP) chelating ligand, and several of their Rare Earth (RE) metal complexes, [bis-(o-dipheylphosphinophenyl)amido]-RER2, {[(C6H5)2P-o-(C6H4)]2NMR2 (R = -CH2-o-(C6H4)NMe2: M = Y, 1; Nd, 2; Gd, 3;), are prepared in high yields. When activated with the strong Lewis acid MMAO-7, all these complexes exhibit catalytic activity toward the polymerization of isoprene (IP) in non-protic hydrocarbons. While the Nd complex (2) showed moderate activity and stereoselectivity, the Y and Gd complexes (1 and 3) exhibited extremely high catalytic efficiency in IP homo-polymerization, and produced polyisoprene rubber (PI) with 95% to over 99% cis-1,4 stereoselectivity and narrow polydispersity indices (<2.0). Moreover, under industrially relevant conditions, complex 3 can catalyze IP to produce ultrahigh molecular weight PI (UHMW-PI, MW up to 1200–2600 kg/mol) rubber with a very narrow polydispersity index (PDI ca. 1.1–1.6), a high-performance elastomeric material mimic of natural rubber (NR).
- Open Access
The Effects of Internal Electron Donors on MgCl2-Supported Ziegler–Natta Catalysts for Isotactic PP
The electron donors (ED) in Ziegler–Natta (Z-N) catalysis are classified as internal electron donors (IED) and external electron donors (EED), and both IED and EED are indispensable components for enhancing the catalytic reactivity and regulating the stereoregularity of polyolefinic materials in a typical industrial Z-N catalytic process. With the intensive research on ED, the Z-N catalyst performances have experienced successive progress in the last few decades. Polypropylenes (PP) as a commodity polyolefin material, especially the isotactic PP (iPP), are produced in multi-billion pounds per annum by utilization of the various IED- and EED-assisted Z-N catalysts systems. In the course of developing Z-N catalysts, the ED constitutes a key component of the content and represents a significant area of future research. In this review, we introduced a concise overview of the functions of IEDs in the generations of Z-N catalyst systems and the widely used IED types (A total of 11 different types of IEDs are encompassed within this study) that have been developed so far. In addition, we focused on the coordination modes of different IEDs in the MgCl2-supported Z-N catalyst system and analyzed the effects of different types of IEDs on the PP isotacticity, regioselectivity, hydrogen sensitivity, and briefly introduced the application of environmentally friendly rosinate and salicylate IEDs.
Open AccessThe Effects of Internal Electron Donors on MgCl2-Supported Ziegler–Natta Catalysts for Isotactic PP
The electron donors (ED) in Ziegler–Natta (Z-N) catalysis are classified as internal electron donors (IED) and external electron donors (EED), and both IED and EED are indispensable components for enhancing the catalytic reactivity and regulating the stereoregularity of polyolefinic materials in a typical industrial Z-N catalytic process. With the intensive research on ED, the Z-N catalyst performances have experienced successive progress in the last few decades. Polypropylenes (PP) as a commodity polyolefin material, especially the isotactic PP (iPP), are produced in multi-billion pounds per annum by utilization of the various IED- and EED-assisted Z-N catalysts systems. In the course of developing Z-N catalysts, the ED constitutes a key component of the content and represents a significant area of future research. In this review, we introduced a concise overview of the functions of IEDs in the generations of Z-N catalyst systems and the widely used IED types (A total of 11 different types of IEDs are encompassed within this study) that have been developed so far. In addition, we focused on the coordination modes of different IEDs in the MgCl2-supported Z-N catalyst system and analyzed the effects of different types of IEDs on the PP isotacticity, regioselectivity, hydrogen sensitivity, and briefly introduced the application of environmentally friendly rosinate and salicylate IEDs.
- Open Access
PNP-Ligated Rare-Earth Metal Catalysts for Efficient Polymerization of Isoprene
The tridentate PNP ligand-supported rare-earth metal complexes, i.e., bis[o-diphenylphosphinophenyl]amido-Re-bis[o-dimethylaminobenzyl], [(Ph2P-o-C6H4)2N]Re[(CH2-o-Me2N(C6H4))2]: (Re = Y, 1; Nd, 2; Gd, 3) were applied to isoprene polymerization. When activated with borate activator ([PhMe2NH][B(C6F5)4] (NH-BARF), catalysts 1 and 3 exhibited excellent catalytic efficiency in aromatic media, produced very-high to ultrahigh molecular weight (Mw over 130 × 104 g/moL) polyisoprene rubber (PIR), and the obtained PIR contained over 98% cis-1,4 head-to-tail repeating unites. In most cases, the borate-activated polymerization reaction proceeded in a quasi-living pattern (PDI = 1.2–1.5) under controlled monomer conversion; whereas, activated with the commercially available modified methylaluminoxane (MMAO3A) in aliphatic hydrocarbon media, complexes 1, 2 and 3 all showed high catalytic efficiency, produced high molecular weight PIR with narrow molecular weight distribution (PDI ≤ 2.0) and high cis-1,4 head-to tail repeating unites in the range of 91–95%. Thus, the catalyst systems that consisted of 1, 2 and 3/MMAO3A, are closely relevant to the current industrial polybutadiene rubber (PBR) and PIR production processes.
Open AccessPNP-Ligated Rare-Earth Metal Catalysts for Efficient Polymerization of Isoprene
The tridentate PNP ligand-supported rare-earth metal complexes, i.e., bis[o-diphenylphosphinophenyl]amido-Re-bis[o-dimethylaminobenzyl], [(Ph2P-o-C6H4)2N]Re[(CH2-o-Me2N(C6H4))2]: (Re = Y, 1; Nd, 2; Gd, 3) were applied to isoprene polymerization. When activated with borate activator ([PhMe2NH][B(C6F5)4] (NH-BARF), catalysts 1 and 3 exhibited excellent catalytic efficiency in aromatic media, produced very-high to ultrahigh molecular weight (Mw over 130 × 104 g/moL) polyisoprene rubber (PIR), and the obtained PIR contained over 98% cis-1,4 head-to-tail repeating unites. In most cases, the borate-activated polymerization reaction proceeded in a quasi-living pattern (PDI = 1.2–1.5) under controlled monomer conversion; whereas, activated with the commercially available modified methylaluminoxane (MMAO3A) in aliphatic hydrocarbon media, complexes 1, 2 and 3 all showed high catalytic efficiency, produced high molecular weight PIR with narrow molecular weight distribution (PDI ≤ 2.0) and high cis-1,4 head-to tail repeating unites in the range of 91–95%. Thus, the catalyst systems that consisted of 1, 2 and 3/MMAO3A, are closely relevant to the current industrial polybutadiene rubber (PBR) and PIR production processes.
- 4 November 2020
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (13)
Preparation of treelike and rodlike carboxymethylated nanocellulose and their effect on carboxymethyl cellulose films
In this work, carboxymethyl cellulose (CMC) with low substitution degree, followed by different posttreatments, was applied to prepare treelike CMC nanofibrils (CMCNFs) and rodlike CMC nanocrystals (CMCNCs), and their performance in CMC composite film was evaluated simultaneously. From transmission electron microscopy results, it was found that the treelike CMCNCFs exhibited a lager aspect ratio compared to the rodlike CMCNCs. As for reinforcing CMC film, 4 wt% was the best adding amount, at this time, the tensile strength of CMC/CMCNFs and CMC/CMCNCs composite films was increased by 72.1% and 47.3%, respectively. Moreover, adding these nanofillers to CMC also could enhance the thermal stability of composite films slightly, while the transmittance of composite films was reduced at the same time. In addition, CMC/CMCNFs film was designed as a packaging box to determine its performance. Therefore, this study could reveal the differences of properties for composites with different types of nanocellulose and provide a foundation for further application of nanocellulose.
- 4 November 2020
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 138 (13)
Preparation of treelike and rodlike carboxymethylated nanocellulose and their effect on carboxymethyl cellulose films
In this work, carboxymethyl cellulose (CMC) with low substitution degree, followed by different posttreatments, was applied to prepare treelike CMC nanofibrils (CMCNFs) and rodlike CMC nanocrystals (CMCNCs), and their performance in CMC composite film was evaluated simultaneously. From transmission electron microscopy results, it was found that the treelike CMCNCFs exhibited a lager aspect ratio compared to the rodlike CMCNCs. As for reinforcing CMC film, 4 wt% was the best adding amount, at this time, the tensile strength of CMC/CMCNFs and CMC/CMCNCs composite films was increased by 72.1% and 47.3%, respectively. Moreover, adding these nanofillers to CMC also could enhance the thermal stability of composite films slightly, while the transmittance of composite films was reduced at the same time. In addition, CMC/CMCNFs film was designed as a packaging box to determine its performance. Therefore, this study could reveal the differences of properties for composites with different types of nanocellulose and provide a foundation for further application of nanocellulose.
- 24 June 2019
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 7 (15) , 12887-12896
Carboxymethyl Cellulose Nanofibrils with a Treelike Matrix: Preparation and Behavior of Pickering Emulsions Stabilization
- 24 June 2019
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 7 (15) , 12887-12896
Carboxymethyl Cellulose Nanofibrils with a Treelike Matrix: Preparation and Behavior of Pickering Emulsions Stabilization
- 29 May 2019
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 7 (12) , 10690-10698
Methodology of Redispersible Dry Cellulose Nanofibrils Powder Synthesis under Waterless Condition
- 29 May 2019
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 7 (12) , 10690-10698
Methodology of Redispersible Dry Cellulose Nanofibrils Powder Synthesis under Waterless Condition
- 28 May 2019
- Published by Springer Nature in Journal of Materials Science
- Vol. 54 (17) , 11713-11725
Redispersibility of cellulose nanoparticles modified by phenyltrimethoxysilane and its application in stabilizing Pickering emulsions
- 28 May 2019
- Published by Springer Nature in Journal of Materials Science
- Vol. 54 (17) , 11713-11725
Redispersibility of cellulose nanoparticles modified by phenyltrimethoxysilane and its application in stabilizing Pickering emulsions