LSLuis Stand

Luis Stand

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Luis Stand has a total of 157 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Evaluation of Radiation Tolerance of 6 LiInP 2 Se 6 for Neutron Science

    by Erick Hoegberg, Eric Qian, Amine Benkechkache, Mercouri G. Kanatzidis, Safdar Imam, Luis Stand, Eric Lukosi

    Lithium indium phosphorus selenide, 6 LiInP 2 Se 6 (LIPSe), has been proposed as a novel semiconductor detector for neutron scattering science applications. Compared with 3 He gas and scintillation detectors currently in use at neutron scattering facilities, semiconductors, such as LIPSe, offer excellent timing and spatial resolution with acceptable efficiency. A known drawback of semiconductor detectors is the low tolerance of heavy charged particle radiation such as the products emitted by the 6 Li( n , T) 4 He reaction used for the detection of neutrons. It is therefore necessary to study whether or not LIPSe is capable of withstanding the level of neutron fluence it may be exposed to throughout operational service as part of a thorough investigation of its suitability for use in instrumentation at modern beam lines. An analysis of radiation damage to LIPSe was conducted using grazing incidence X‐ray diffraction, UV–vis spectroscopy, Raman spectroscopy, and direct measurements of alpha radiation response. Results suggest that thin samples retain operability as a neutron detector at up to 10 15 n/cm 2  s, though some sources of systematic error may cause alpha response spectra to be degraded beyond what might be expected in practical applications.

  • Open Access

    Bi-Assisted Double-Sided ZnO Nanorod Architectures for Fast and Geometry-Enhanced X-Ray Scintillation

    by Sinem V. Kurudirek, Anna Erickson, Paul J. Sellin, Benjamin J. Lawrie, Tanya A. Balandin, Luis Stand, Charles L. Melcher, Jason D. Azoulay, Nolan E. Hertel, Murat Kurudirek

    Bi-assisted ZnO nanorod (NR) arrays are investigated as thin, transparent, and fast nanostructured scintillator architectures for X-ray detection. Vertically aligned ZnO:Bi NR arrays were grown hydrothermally on fused-silica substrates in single-sided, refresh-grown, and double-sided configurations to investigate the effects of Bi-assisted growth, effective scintillating volume, and collection geometry on the measured luminescence response. Structural and morphological analyses show that moderate Bi-assisted growth preserves the preferential c-axis-oriented wurtzite ZnO structure while producing dense, high-aspect-ratio NR arrays. Optical spectroscopy reveals a visible-emission-dominant response, with broad yellow–orange photoluminescence centered at ∼580–600 nm and weak near-band-edge emission. Cathodoluminescence imaging and spectral mapping further show that the visible emission is spatially enhanced at NR edge/sidewall regions, supporting a surface/defect-mediated recombination mechanism. X-ray photoelectron spectroscopy and energy-dispersive X-ray spectroscopy analyses of representative ZnO:Bi samples support the presence of Bi species and surface/defect-related oxygen contributions. Time-resolved PL measurements yield a fast amplitude-weighted average lifetime of ∼5.3 ns, indicating rapid defect-mediated visible recombination. Under 45 kV X-ray tube voltage, double-sided ZnO:Bi NR arrays exhibit broad radioluminescence centered at ∼600 nm in both reflection and transmission geometries. Under the investigated measurement conditions, the integrated detected RL intensity in transmission geometry is approximately 6–8 times that measured in reflection geometry. Among the double-sided samples, ZnO:Bi (5%) provides the highest measured transmission-mode RL intensity, whereas higher nominal Bi loading reduces the response, consistent with increased disorder and nonradiative loss pathways. The spectral separation between strong near-band-edge absorption and yellow–orange RL emission may reduce reabsorption losses and facilitate visible-light transport through the NR architecture. These results demonstrate that Bi-assisted double-sided ZnO NR architectures provide a promising platform for fast, transparent, and geometry-enhanced X-ray scintillators.


  • Open Access

    Synthesis and Characterization of a Compositionally Complex Aluminum Garnet Ceramic Scintillator: (Gd,Y,Tb,Lu) 3 Al 5 O 12 :Ce

    by Kaden Anderson, Nathan Gillespie, Luis Stand, Marlena Alexander, Rebecca Lalk, Matthias Müller, Nicholas Anastasi, Jaroslaw Glodo, Charles Melcher, Mariya Zhuravleva

    High‐energy X‐ray radiography plays a critical role in national security as it is used to scan cargo for illicit materials, including special nuclear materials. However, currently used scintillators face cost or performance drawbacks, driving the search for superior alternatives. We propose compositionally complex aluminum garnets, particularly (Gd 0.25 Y 0.25 Tb 0.25 Lu 0.25 ) 3 Al 5 O 12 :Ce 2% (GYTLAG), as a promising candidate for this application. In this work, we synthesized GYTLAG:Ce nanopowders and fabricated a highly dense ceramic via uniaxial hot pressing. Energy‐dispersive X‐ray spectroscopy mapping found a homogeneous elemental distribution within the garnet phase. The photoluminescence and scintillation decay kinetics are assessed. Notably, the 2% Ce‐doped GYTLAG ceramic exhibited a light yield of 13 500 photons per MeV and an afterglow of less than 1% of the initial intensity at 1 ms, making this material promising for high‐energy X‐ray radiography applications.


  • Tb-rich multi-component garnet ceramic scintillators for high-energy X-ray radiography

    by Nathan Gillespie, Kaden Anderson, Rebecca Lalk, Meredith Harpel, Luis Stand, Charles Melcher, Jarek Glodo, Matthias Müller, Govinda Adhikari, Sean Drewry, et al.


  • Crystal Growth Scale-Up and Stability of RbSr 2 X 5 :Eu Scintillators

    by Kimberly S. Pestovich, Luis Stand, Megan Gillespie, Charles L. Melcher, Edgar van Loef, Mariya Zhuravleva


  • Robust Perovskite Polymer Scintillating Fibers Converted from Tennis Strings

    by Shruti Jayaprakash Saiji, Luis Stand, Yauhen Tratsiak, Carlos Flores, Fnu Joshua, Lei Zhai, Andre J. Gesquiere, Shin‐Tson Wu, Yajie Dong

    Perovskite materials are emerging as next‐generation scintillators due to their strong light absorption, high light yield, fast response times, and solution‐processability. While single‐crystal perovskites offer excellent performance, their brittleness and environmental sensitivity hinder scalability. Perovskite nanoparticles provide a promising alternative but face challenges such as poor stability and aggregation, reducing scintillation efficiency. Embedding these nanoparticles in polymer matrices has been explored to improve stability, however, existing methods offer limited control over nanoparticle size and transparency, restrict polymer choice, and are incompatible with low‐swelling polymers like PET, which offer superior barrier properties and enhance stability. Here, these limitations are addressed using an optimized deep‐dyeing method that enables uniform incorporation of perovskite nanoparticles into PET fibers, a low‐swelling polymer previously inaccessible for composite scintillators. This approach yields transparent, color‐tunable, and thermally stable perovskite‐PET scintillating fibers suitable for scalable applications. The PET fibers used are sourced from commercially available tennis strings, offering a low‐cost, mechanically robust, and scalable platform for composite fabrication. The resulting fibers exhibit excellent photoluminescence and radioluminescence stability, full recovery after thermal cycling up to 167 °C, strong moisture resistance, and a high light yield of 23,000 photons/MeV, more than twice that of a commercial scintillating fiber. Their flexible geometry and small cross‐section allow integration into modular or wearable detection systems with high spatial resolution. Incorporating cladding layers in future designs can further enhance waveguiding and overall scintillator performance. These results highlight a scalable and versatile strategy for high‐performance scintillating fibers with broad potential in x‐ray imaging and dosimetry in harsh environments.


  • Open Access

    Core–Valence-Luminescence Cs–M–Cl (M = Zn, Mg) Scintillators for Photon-Counting X-ray Detectors

    by J. Jasper van Blaaderen, Daniel Rutstrom, Giles Bangoyina, Luis Stand, Casper van Aarle, Johan de Haas, Dennis R. Schaart, Charles L. Melcher, Mariya Zhuravleva, Pieter Dorenbos


  • Crystal Growth, Optical, and Scintillation Properties of Eu²+-Doped TlSr₂Br₅

    by Edgar van Loef, Myles Inniss, Jared Schott, Kimberly Pestovich, Luis Stand, Mariya Zhuravleva, Charles Melcher, Lakshmi Soundara Pandian, Jarek Glodo

    Crystals of undoped and Eu2+-doped TlSr2Br5 of up to 16 mm in diameter and 50 mm in length were grown by the Vertical Bridgman technique. TlSr2Br5 has the monoclinic crystal structure with space group P21/c. Its density and Zeff are 5.03 g/cm3 and 58.6, respectively. Radioluminescence spectra of undoped and Eu2+-doped TlSr2Br5 feature a broad emission band peaking at about 440 nm for undoped and 520 nm for Eu2+-doped crystals. The light yield of undoped TlSr2Br5 is 42,000 ph/MeV, which increases to 55,000 ph/MeV for Eu2+-doped crystals. The energy resolution at 662 keV (137Cs) is about 5 – 6% (FWHM). The scintillation decay of undoped and Eu2+-doped TlSr2Br5 is of the order of 100s of nanoseconds.


  • Enhanced Neutron and γ-Ray Detection via 6Li Substitution in Undoped and Tl-Doped Zero-Dimensional Perovskite Cs3Cu2I5 Scintillators

    by Luis Stand, Kimberly S. Pestovich, Ketaki Joshi, Xianfei Wen, Jason Hayward, Yauhen Tratsiak, Daniel Rutstrom, Myles Inniss, Charles L. Melcher, Jarek Glodo, et al.