Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Carrie Michele Hall has a total of 51 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Effect of EGR and boost conditions on efficiency and emissions in a DME–propane compression ignition engine

    by William de Ojeda, Levi Ranabhat, Carrie M. Hall, Simon Wu, Jorge Pulpeiro Gonzalez

  • Open Access

    Innovations in Wave Energy: A Case Study of TALOS-WEC’s Multi-Axis Technology

    by Fatemeh Nasr Esfahani, Wanan Sheng, Xiandong Ma, Carrie M. Hall, George Aggidis

    The technologically advanced learning ocean system—wave energy converter (TALOS-WEC) project addresses the urgent need for sustainable and efficient energy solutions by leveraging the vast potential of wave energy. This project presents a pioneering approach to wave energy capture through its unique multi-axis and omnidirectional point absorber design. Featuring a fully enclosed power take-off (PTO) system, the TALOS-WEC harnesses energy across six degrees of freedom (DoFs) using an innovative internal reaction mass (IRM) mechanism. This configuration enables efficient energy extraction from the relative motion between the IRM and the hull, aiming for energy conversion efficiencies ranging between 75–80% under optimal conditions, while ensuring enhanced durability in harsh marine environments. The system’s adaptability is reflected in its versatile geometric configurations, including triangular, octagonal, and circular designs, customised for diverse marine conditions. Developed at Lancaster University, UK, and supported by international collaborations, the TALOS-WEC project emphasises cutting-edge advancements in hydrodynamic modelling, geometric optimisation, and control systems. Computational methodologies leverage hybrid frequency-time domain models and advanced panel codes (WAMIT, HAMS, and NEMOH) to address non-linearities in the PTO system, ensuring precise simulations and optimal performance. Structured work packages (WPs) guide the project, addressing critical aspects such as energy capture optimisation, reliability enhancement, and cost-effectiveness through innovative monitoring and control strategies. This paper provides a comprehensive overview of the TALOS-WEC, detailing its conceptual design, development, and validation. Findings demonstrate TALOS’s potential to achieve scalable, efficient, and robust wave energy conversion, contributing to the broader advancement of renewable energy technologies. The results underscore the TALOS-WEC’s role as a cutting-edge solution for harnessing oceanic energy resources, offering perspectives into its commercial viability and future scalability.


  • Open Access

    A Control-Oriented Model for Predicting Variations in Membrane Water Content of an Open-Cathode Proton Exchange Membrane Fuel Cell

    by Adwoa S. Adunyah, Harshal A. Gawli, Carrie M. Hall

    Proton exchange membrane (PEM) fuel cells have emerged as a viable alternative energy production source for stationary and transportation applications. Reliable and sustainable fuel cell operation requires effective water management. Membrane water content can vary along the stack during transients which can lead to losses in fuel cell performance. To control these variations, a model that predicts the internal humidity dynamics of the stack is needed. In this study, a control-oriented model for predicting membrane water content variation was developed and implemented in MATLAB/Simulink. A lumped parameter model was initially developed and then further discretized into smaller control volumes to track humidity distribution along the stack. To validate the model’s predictions, the predicted results were compared to computer simulation results from GT-Suite. The root mean square error (RMSE) between the model’s prediction and GT-Suite’s simulation results was found to be within 1.5 membrane water content for all cases, demonstrating the model’s capability to capture the variation in membrane water content along the stack. The developed model will be useful for real-time control of membrane water content distribution in PEM fuel cells.


  • Open Access

    A Control-Oriented Model for Predicting Variations in Membrane Water Content of an Open-Cathode Proton Exchange Membrane Fuel Cell

    by Adwoa Adunyah, Harshal Gawli, Carrie Michele Hall

    Proton exchange membrane (PEM) fuel cells have emerged as a viable alternative energy production source for stationary and transportation applications. Reliable and sustainable fuel cell operation requires effective water management. Membrane water content can vary along the stack during transients which can lead to losses in fuel cell performance. To control these variations a model that predicts the internal humidity dynamics of the stack is needed. In this study, a control-oriented model for predicting membrane water content variation was developed and implemented in MATLAB/Simulink. A lumped parameter model was initially developed and then further discretized into smaller control volumes to track humidity distribution along the stack. To validate the model’s predictions, the predicted results were compared to computer simulation results from GT-Suite. The root mean square error (RMSE) between the model’s prediction and GT-Suite’s simulation results was found to be within 1.5 membrane water content for all cases, demonstrating the model’s capability to capture the variation of membrane water content along the stack. The developed model will be useful for real-time control of membrane water content variation in PEM fuel cells.

  • Analysis of Uncertainty Impacts on Emissions and Fuel Economy Evaluation for Chassis Dynamometer Testing

    by Miriam Di Russo, Kevin Stutenberg, Carrie M. Hall

    This study illustrates a methodology for quantifying the uncertainties encountered in the measurement of tailpipe emissions and in the fuel consumption measurements for light-duty conventional vehicles tested on a four-wheel drive chassis dynamometer. The study leverages high-fidelity experimental data collected over three standard drive cycles, UDDS, HWY and US06, intended to simulate a wide range of operating conditions. A method is developed to estimate the measurement uncertainties in fuel consumption for a test cycle, which occur due to the accumulation of measurement uncertainties propagated through the system. The uncertainty determination model uses statistical analysis and standard propagation techniques to evaluate and combine the uncertainties introduced from various sources (including the vehicle, chassis dynamometer, driver, and instrumentation). The analysis also examines three different experimental methods for determining the fuel consumption: 1) carbon mass balance, 2) volumetric fuel scale and 3) gravimetric fuel scale, and takes into consideration the properties of the instrumentation used. The results show that the most significant influence on the determination of the emissions comes from the concentration measurement, and similarly the biggest impact on the total fuel consumption uncertainty comes from the uncertainty in the determination of the carbon dioxide mass, due to the large presence of this pollutant in the overall emissions. It was found that the fuel consumption uncertainties are in the range of ±1-2% for all three methods analyzed, with the lowest values being obtained for measurements performed using the gravimetric method for all three drive cycles considered.


  • Open Access

    A Hybrid Physics-Based and Stochastic Neural Network Model Structure for Diesel Engine Combustion Events

    by King Ankobea-Ansah, Carrie Michele Hall

    Estimation of combustion phasing and power production is essential to ensuring proper combustion and load control. However, archetypal control-oriented physics-based combustion models can become computationally expensive if highly accurate predictive capabilities are achieved. Artificial neural network (ANN) models, on the other hand, may provide superior predictive and computational capabilities. However, using classical ANNs for model-based prediction and control can be challenging, since their heuristic and deterministic black-box nature may make them intractable or create instabilities. In this paper, a hybridized modeling framework that leverages the advantages of both physics-based and stochastic neural network modeling approaches is utilized to capture CA50 (the timing when 50% of the fuel energy has been released) along with indicated mean effective pressure (IMEP). The performance of the hybridized framework is compared to a classical ANN and a physics-based-only framework in a stochastic environment. To ensure high robustness and low computational burden in the hybrid framework, the CA50 input parameters along with IMEP are captured with a Bayesian regularized ANN (BRANN) and then integrated into an overall physics-based 0D Wiebe model. The outputs of the hybridized CA50 and IMEP models are then successively fine-tuned with BRANN transfer learning models (TLMs). The study shows that in the presence of a Gaussian-distributed model uncertainty, the proposed hybridized model framework can achieve an RMSE of 1.3 × 10−5 CAD and 4.37 kPa with a 45.4 and 3.6 s total model runtime for CA50 and IMEP, respectively, for over 200 steady-state engine operating conditions. As such, this model framework may be a useful tool for real-time combustion control where in-cylinder feedback is limited.