Nazim Babacan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Nazim Babacan has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
Muhammed Taha Yildiz
Institute of Defence Technologies, Sivas University of Science and Technology, Sivas, Turkey
4 shared publications- Istemi Baris Ozsoy
TOBB University of Economics and Technology, Department of Mechanical Engineering, Ankara, 06560, Turkey
3 shared publications Abdullah Atilgan
2 shared publicationsFurkan Ozdemir
2 shared publicationsRumeysa Ozdemir
Institute of Defence Technologies, Sivas University of Science and Technology, Sivas, Turkey
2 shared publications- Tobias Gustmann
OSCAR PLT GmbH, Klipphausen, Germany
2 shared publications
Latest Publications
- 2 November 2026
- Published by Taylor & Francis
- p. 205-221
Multimaterial and Hybrid Fabrication Strategies
In today’s engineering, especially in the aerospace and biomedical industries, the demand for lightweight and complex components has made single-material systems often insufficient. While non-conventional manufacturing helps create complex structures, it still struggles with surface quality and precision. This is where hybrid manufacturing (HM) stands out , combining additive, subtractive, and joining processes into a single process chain. This integration eliminates the need for transporting parts between machines, significantly reducing production time, costs, and the risk of defects. A key driver of this evolution is multimaterial manufacturing , which allows us to strategically place different materials within a single component. Instead of being limited by one material’s properties, we can design parts where one region handles heavy loads while another resists corrosion or dissipates heat. This chapter covers the importance of achieving strong interfacial integrity and creating functionally graded materials (FGMs) to ensure smooth transitions between diverse material groups. Finally, this chapter highlights how moving beyond single-material constraints opens up unprecedented design freedom and operational efficiency, marking a natural evolution in modern manufacturing.
- 2 November 2026
- Published by Taylor & Francis
- p. 205-221
Multimaterial and Hybrid Fabrication Strategies
In today’s engineering, especially in the aerospace and biomedical industries, the demand for lightweight and complex components has made single-material systems often insufficient. While non-conventional manufacturing helps create complex structures, it still struggles with surface quality and precision. This is where hybrid manufacturing (HM) stands out , combining additive, subtractive, and joining processes into a single process chain. This integration eliminates the need for transporting parts between machines, significantly reducing production time, costs, and the risk of defects. A key driver of this evolution is multimaterial manufacturing , which allows us to strategically place different materials within a single component. Instead of being limited by one material’s properties, we can design parts where one region handles heavy loads while another resists corrosion or dissipates heat. This chapter covers the importance of achieving strong interfacial integrity and creating functionally graded materials (FGMs) to ensure smooth transitions between diverse material groups. Finally, this chapter highlights how moving beyond single-material constraints opens up unprecedented design freedom and operational efficiency, marking a natural evolution in modern manufacturing.
- 26 August 2026
- Published by Springer Nature in Transactions of the Indian Institute of Metals
- Vol. 79 (9) , 229
Effect of Different Heat Treatment Temperatures on the Shape Memory Characteristics of a Co–Cr–Al–Si Alloy
- 26 August 2026
- Published by Springer Nature in Transactions of the Indian Institute of Metals
- Vol. 79 (9) , 229
Effect of Different Heat Treatment Temperatures on the Shape Memory Characteristics of a Co–Cr–Al–Si Alloy
- 6 August 2026
- Published by Springer Nature in Journal of Materials Science
- Vol. 61 (39) , 30111-30130
Effect of laser powder bed fusion processing parameters on the microstructure and shape recovery of heat-treated Fe–30Mn–6Si alloy
- 6 August 2026
- Published by Springer Nature in Journal of Materials Science
- Vol. 61 (39) , 30111-30130
Effect of laser powder bed fusion processing parameters on the microstructure and shape recovery of heat-treated Fe–30Mn–6Si alloy
- 18 April 2026
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
Topology optimization and hybrid production of an AlSi10Mg robotic arm gripper: A case study
The integration of simulation-driven design tools into additive manufacturing (AM) technologies offers new pathways for producing lightweight structures. In addition, some simulation tools enable the prediction of potential defects and failures caused by residual stresses prior to manufacturing. In this study, a systematic workflow combining topology optimization (TO), laser powder bed fusion (PBF-LB/M), and hybrid post-processing is presented for the development of a robotic arm gripper. Using finite element (FE)-based TO, the original gripper geometry was redesigned to achieve a 65% mass reduction, decreasing the component weight from 570 to 192 g, while maintaining structural integrity. Residual stress accumulation and potential distortion occurring during PBF-LB/M were predicted using inherent-strain-based simulations, including the stress relief achieved by post–heat treatment scenario. The optimized design was manufactured using AlSi10Mg powder via PBF-LB/M, followed by 300°C for 2 h annealing, and subsequently refined through drilling, tapping, and surface finishing as part of a hybrid AM approach. Post-processing reduced the surface roughness from 3.4 (as-built) to 0.035 µm on functional contact regions, enabling precise joint compatibility. This study provides a transferable engineering framework that integrates computational design, distortion prediction, and hybrid manufacturing to realize lightweight, functionally efficient structures for robotic applications.
- 18 April 2026
- Published by SAGE Publications in Journal of Intelligent Material Systems and Structures
Topology optimization and hybrid production of an AlSi10Mg robotic arm gripper: A case study
The integration of simulation-driven design tools into additive manufacturing (AM) technologies offers new pathways for producing lightweight structures. In addition, some simulation tools enable the prediction of potential defects and failures caused by residual stresses prior to manufacturing. In this study, a systematic workflow combining topology optimization (TO), laser powder bed fusion (PBF-LB/M), and hybrid post-processing is presented for the development of a robotic arm gripper. Using finite element (FE)-based TO, the original gripper geometry was redesigned to achieve a 65% mass reduction, decreasing the component weight from 570 to 192 g, while maintaining structural integrity. Residual stress accumulation and potential distortion occurring during PBF-LB/M were predicted using inherent-strain-based simulations, including the stress relief achieved by post–heat treatment scenario. The optimized design was manufactured using AlSi10Mg powder via PBF-LB/M, followed by 300°C for 2 h annealing, and subsequently refined through drilling, tapping, and surface finishing as part of a hybrid AM approach. Post-processing reduced the surface roughness from 3.4 (as-built) to 0.035 µm on functional contact regions, enabling precise joint compatibility. This study provides a transferable engineering framework that integrates computational design, distortion prediction, and hybrid manufacturing to realize lightweight, functionally efficient structures for robotic applications.
- Open Access
- 30 April 2025
- Published by International Journal of 3D Printing Technologies and Digital Industry in International Journal of 3D Printing Technologies and Digital Industry
- Vol. 9 (1) , 36-44
COMPARATIVE ANALYSIS OF BCCZZ LATTICE STRUCTURE COMPRESSION BEHAVIOR: EXPERIMENTAL, NUMERICAL, AND MACHINE LEARNING APPROACHES
In this study, the compression behavior of the body-centered cubic with exterior and interior vertical struts (BCCZZ) lattice structure produced with Polylactic Acid (PLA) has been investigated using experimental, numerical, and machine-learning algorithms. When comparing digital image correlation and the ANSYS Static Structural numerical module, the measurements of deformation in the -Y direction taken from the top-right, top-left, middle-right, and middle-left points of the lattice structure are closely matched, with differences of 3.5%, 0.66%, 22.3%, and 12.69%, respectively. However, measurements from the bottom-left and bottom-right points show discrepancies of 49.17% and 58.91%, respectively. The lack of agreement between numerical and digital image correlation (DIC) analyses at the bottom-left and bottom-right points of the lattice structure is attributed to deformation in the lower section observed in the experimental study. The numerical study, modeling only elastic deformation, fails to account for broken regions' deformation adequately. Furthermore, the elastic deformation region has been comparatively investigated using experimental, numerical, and multilinear regression (MLR) models. Despite the MLR algorithm being trained with data from the compression test and achieving an R2 value of 0.97, numerical modeling is closer to the experimental results. Thus, for the first time in the literature, the compression behavior of the BCCZZ lattice structure made from PLA+ has been comparatively investigated using experimental, numerical, and machine learning methods.
- 30 April 2025
- Published by International Journal of 3D Printing Technologies and Digital Industry in International Journal of 3D Printing Technologies and Digital Industry
- Vol. 9 (1) , 36-44
Open AccessCOMPARATIVE ANALYSIS OF BCCZZ LATTICE STRUCTURE COMPRESSION BEHAVIOR: EXPERIMENTAL, NUMERICAL, AND MACHINE LEARNING APPROACHES
In this study, the compression behavior of the body-centered cubic with exterior and interior vertical struts (BCCZZ) lattice structure produced with Polylactic Acid (PLA) has been investigated using experimental, numerical, and machine-learning algorithms. When comparing digital image correlation and the ANSYS Static Structural numerical module, the measurements of deformation in the -Y direction taken from the top-right, top-left, middle-right, and middle-left points of the lattice structure are closely matched, with differences of 3.5%, 0.66%, 22.3%, and 12.69%, respectively. However, measurements from the bottom-left and bottom-right points show discrepancies of 49.17% and 58.91%, respectively. The lack of agreement between numerical and digital image correlation (DIC) analyses at the bottom-left and bottom-right points of the lattice structure is attributed to deformation in the lower section observed in the experimental study. The numerical study, modeling only elastic deformation, fails to account for broken regions' deformation adequately. Furthermore, the elastic deformation region has been comparatively investigated using experimental, numerical, and multilinear regression (MLR) models. Despite the MLR algorithm being trained with data from the compression test and achieving an R2 value of 0.97, numerical modeling is closer to the experimental results. Thus, for the first time in the literature, the compression behavior of the BCCZZ lattice structure made from PLA+ has been comparatively investigated using experimental, numerical, and machine learning methods.
- Open Access
- 17 April 2024
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 132 (7-8) , 3861-3875
Dynamic mechanical properties of selective laser-melted AlSi10Mg lattice structures: experimental and numerical analysis with emphasis on Johnson-Cook model parameters
Additively manufactured lattice structures are extensively utilized because of their unique characteristics, including lightweight design, high energy absorption capabilities, and exceptional specific strength. This study focuses on accurately simulating the dynamic mechanical behavior of AlSi10Mg lattice structures produced using selective laser melting (SLM). A series of experimental studies has been conducted to establish the parameters of the J–C hardening and damage model for additively manufactured AlSi10Mg alloys. The lattice structures, featuring face-centered cubic (FCC) and diamond topologies with a 25% designed relative density, underwent scanning electron microscopy (SEM) for geometrical precision assessment. Dynamic compressive behavior was investigated via split Hopkinson pressure bar (SHPB) tests. Numerical simulations in Ls-Dyna, utilizing the identified J–C parameters, were employed to replicate SHPB tests. Findings indicate that the specific strength and the specific energy absorption values of FCC lattice samples have higher than those of diamond samples at strain rates of 750 and 1100 s−1. While the overall strains and deformation modes were well predicted by numerical analyzes, a deeper insight into local stress concentrations under dynamic loads was achieved. Consequently, the obtained J–C model parameters offer valuable insight into characterizing the dynamic behavior of AlSi10Mg lattice structures produced by SLM.
- 17 April 2024
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 132 (7-8) , 3861-3875
Open AccessDynamic mechanical properties of selective laser-melted AlSi10Mg lattice structures: experimental and numerical analysis with emphasis on Johnson-Cook model parameters
Additively manufactured lattice structures are extensively utilized because of their unique characteristics, including lightweight design, high energy absorption capabilities, and exceptional specific strength. This study focuses on accurately simulating the dynamic mechanical behavior of AlSi10Mg lattice structures produced using selective laser melting (SLM). A series of experimental studies has been conducted to establish the parameters of the J–C hardening and damage model for additively manufactured AlSi10Mg alloys. The lattice structures, featuring face-centered cubic (FCC) and diamond topologies with a 25% designed relative density, underwent scanning electron microscopy (SEM) for geometrical precision assessment. Dynamic compressive behavior was investigated via split Hopkinson pressure bar (SHPB) tests. Numerical simulations in Ls-Dyna, utilizing the identified J–C parameters, were employed to replicate SHPB tests. Findings indicate that the specific strength and the specific energy absorption values of FCC lattice samples have higher than those of diamond samples at strain rates of 750 and 1100 s−1. While the overall strains and deformation modes were well predicted by numerical analyzes, a deeper insight into local stress concentrations under dynamic loads was achieved. Consequently, the obtained J–C model parameters offer valuable insight into characterizing the dynamic behavior of AlSi10Mg lattice structures produced by SLM.
- 1 December 2023
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 131 (5) , 936-942
Comparison of tensile properties and porcelain bond strength in metal frameworks fabricated by selective laser melting using three different Co-Cr alloy powders
- 1 December 2023
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 131 (5) , 936-942
Comparison of tensile properties and porcelain bond strength in metal frameworks fabricated by selective laser melting using three different Co-Cr alloy powders
- 27 June 2023
- Published by Springer Nature in Shape Memory and Superelasticity
- Vol. 9 (3) , 447-459
Effects of Remelting on the Properties of a Superelastic Cu–Al–Mn Shape Memory Alloy Fabricated by Laser Powder Bed Fusion
- 27 June 2023
- Published by Springer Nature in Shape Memory and Superelasticity
- Vol. 9 (3) , 447-459
Effects of Remelting on the Properties of a Superelastic Cu–Al–Mn Shape Memory Alloy Fabricated by Laser Powder Bed Fusion
- Open Access
- 31 August 2022
- Published by International Journal of 3D Printing Technologies and Digital Industry in International Journal of 3D Printing Technologies and Digital Industry
- Vol. 6 (2) , 286-291
INVESTIGATION OF THE LOAD-BEARING CAPACITY OF Co-Cr LATTICE STRUCTURES FABRICATED BY SELECTIVE LASER MELTING
Additively manufactured Co-Cr lattice structures are promising choices especially in medical applications. This study involves the designing and fabrication of a novel lattice structures with FCCZZ (face-centered cubic with exterior and interior vertical struts) unit cell topology. The manufacturability by selective laser melting (SLM) and the load-bearing capacity of this structure were examined by utilizing scanning electron microscope (SEM) observations and uniaxial compression tests. The samples with FCCZ (face-centered cubic with vertical struts) structures were also produced and analyzed for comparison. The designed lattice structures were successfully manufactured by SLM even though an approximately 1.5-2% increase in the theoretical relative density values was observed. The novel FCCZZ samples exhibited superior performance in terms of the load-bearing capacity compared to FCCZ samples by possessing 17% higher specific strength value.
- 31 August 2022
- Published by International Journal of 3D Printing Technologies and Digital Industry in International Journal of 3D Printing Technologies and Digital Industry
- Vol. 6 (2) , 286-291
Open AccessINVESTIGATION OF THE LOAD-BEARING CAPACITY OF Co-Cr LATTICE STRUCTURES FABRICATED BY SELECTIVE LASER MELTING
Additively manufactured Co-Cr lattice structures are promising choices especially in medical applications. This study involves the designing and fabrication of a novel lattice structures with FCCZZ (face-centered cubic with exterior and interior vertical struts) unit cell topology. The manufacturability by selective laser melting (SLM) and the load-bearing capacity of this structure were examined by utilizing scanning electron microscope (SEM) observations and uniaxial compression tests. The samples with FCCZ (face-centered cubic with vertical struts) structures were also produced and analyzed for comparison. The designed lattice structures were successfully manufactured by SLM even though an approximately 1.5-2% increase in the theoretical relative density values was observed. The novel FCCZZ samples exhibited superior performance in terms of the load-bearing capacity compared to FCCZ samples by possessing 17% higher specific strength value.