Prasanta Kumar Datta
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Prasanta Kumar Datta has a total of 305 co-authors. Here are the top co-authors by number of shared publications:
Tara Singha
Department of Physics, Indian Institute of Technology Kharagpur, Kharagpur 721302, India
11 shared publicationsSayan Prodhan
Department of Physics, Indian Institute of Technology, Kharagpur-721302, India
9 shared publications- Manobina Karmakar
NanoScience Technology Center, University of Central Florida, 12424 Research Parkway Suite 400, Orlando, FL 32826, USA
8 shared publications Nikita Porwal
Department of Physics, Indian Institute of Technology Kharagpur, Kharagpur, WB, 721302, India
8 shared publicationsSayantan Bhattacharya
Department of Physics, Indian Institute of Technology Kharagpur, West Bengal 721302, India
7 shared publicationsAyon Jyoti Karmakar
Indian Institute of Technology Kharagpur
6 shared publications
Latest Publications
- 13 November 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
Defect-Mediated Interfacial Polarization in TiO2-Grafted CNT/PDMS Nanocomposites for Terahertz EMI Screening
Achieving tunable terahertz electromagnetic interference screening requires balance between conductive charge transport and dielectric polarization within a nanocomposite architecture. This study investigates conductive−dielectric synergy in flexible hybrid nanocomposites consisting of titanium dioxide decorated carbon nanotube nanofillers dispersed within a polydimethylsiloxane matrix. Four nanocomposites with increasing CNT loadings, namely 0.4, 0.7, 1.0, and 1.3 wt %, are fabricated, with TiO2 content fixed at 10 wt % relative to CNT mass. Their structural, morphological and thermal properties are investigated using X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, transmission electron microscopy, scanning electron microscopy, and thermogravimetric analysis. The dielectric response and charge transport dynamics are probed using an indigenously developed terahertz time-domain spectroscopy system operating over 0.2−1.1 THz, and analyzed through the Drude−Smith model. Raman analysis reveals increasing structural disorder and stronger CNT−TiO2 interfacial coupling with rising filler content. Meanwhile, the scattering time decreases, accompanied by a shift in the localization parameter, signifying enhanced carrier confinement at TiO2-induced defect and interfacial sites as the filler content is increased. This defect-mediated interfacial polarization, coupled with a persistent conductive CNT network, yields a maximum total shielding effectiveness of ∼35 dB. The results establish a direct correlation between Raman-derived structural disorder, Drude−Smith charge-transport parameters, and terahertz screening performance, demonstrating that interfacial polarization at TiO2-grafted CNT junctions and charge transport through the CNT network collectively regulate the terahertz screening response. These findings provide design guidelines for developing lightweight, flexible, and tunable TiO2-grafted CNT/PDMS nanocomposites for next-generation terahertz electromagnetic interference screening applications.
- 13 November 2026
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
Defect-Mediated Interfacial Polarization in TiO2-Grafted CNT/PDMS Nanocomposites for Terahertz EMI Screening
Achieving tunable terahertz electromagnetic interference screening requires balance between conductive charge transport and dielectric polarization within a nanocomposite architecture. This study investigates conductive−dielectric synergy in flexible hybrid nanocomposites consisting of titanium dioxide decorated carbon nanotube nanofillers dispersed within a polydimethylsiloxane matrix. Four nanocomposites with increasing CNT loadings, namely 0.4, 0.7, 1.0, and 1.3 wt %, are fabricated, with TiO2 content fixed at 10 wt % relative to CNT mass. Their structural, morphological and thermal properties are investigated using X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, transmission electron microscopy, scanning electron microscopy, and thermogravimetric analysis. The dielectric response and charge transport dynamics are probed using an indigenously developed terahertz time-domain spectroscopy system operating over 0.2−1.1 THz, and analyzed through the Drude−Smith model. Raman analysis reveals increasing structural disorder and stronger CNT−TiO2 interfacial coupling with rising filler content. Meanwhile, the scattering time decreases, accompanied by a shift in the localization parameter, signifying enhanced carrier confinement at TiO2-induced defect and interfacial sites as the filler content is increased. This defect-mediated interfacial polarization, coupled with a persistent conductive CNT network, yields a maximum total shielding effectiveness of ∼35 dB. The results establish a direct correlation between Raman-derived structural disorder, Drude−Smith charge-transport parameters, and terahertz screening performance, demonstrating that interfacial polarization at TiO2-grafted CNT junctions and charge transport through the CNT network collectively regulate the terahertz screening response. These findings provide design guidelines for developing lightweight, flexible, and tunable TiO2-grafted CNT/PDMS nanocomposites for next-generation terahertz electromagnetic interference screening applications.
- 12 October 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (14)
Ultrafast carrier dynamics and nonlinear absorption mechanisms in ZnO/MgO multilayered thin film
ZnO/MgO multilayered composite thin films have been prepared by spin coating method. XPS analysis verified the chemical states of Zn, Mg, and O, as well as the effective incorporation of MgO within the ZnO matrix. The linear optical studies revealed absorption features and emission pathways associated with the multilayer structure, while femtosecond, third-order nonlinear optical measurements demonstrated a pronounced reverse saturable absorption response. Femtosecond transient absorption spectroscopy was employed to probe the carrier dynamics, providing insights into ultrafast excitation, carrier trapping, and relaxation mechanisms. The optical limiting threshold (OLT) observed under femtosecond excitation indicates that the MgO/ZnO multilayer thin film exhibits excellent limiting performance. The interaction of the composite materials at the nanoscale has resulted in the superior nonlinear optical absorption (two-photon absorption) coefficient of 244.741 cm/GW as well as the limiting behavior highlighting its potential as an efficient optical limiter for ultrafast photonic applications.
- 12 October 2026
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 140 (14)
Ultrafast carrier dynamics and nonlinear absorption mechanisms in ZnO/MgO multilayered thin film
ZnO/MgO multilayered composite thin films have been prepared by spin coating method. XPS analysis verified the chemical states of Zn, Mg, and O, as well as the effective incorporation of MgO within the ZnO matrix. The linear optical studies revealed absorption features and emission pathways associated with the multilayer structure, while femtosecond, third-order nonlinear optical measurements demonstrated a pronounced reverse saturable absorption response. Femtosecond transient absorption spectroscopy was employed to probe the carrier dynamics, providing insights into ultrafast excitation, carrier trapping, and relaxation mechanisms. The optical limiting threshold (OLT) observed under femtosecond excitation indicates that the MgO/ZnO multilayer thin film exhibits excellent limiting performance. The interaction of the composite materials at the nanoscale has resulted in the superior nonlinear optical absorption (two-photon absorption) coefficient of 244.741 cm/GW as well as the limiting behavior highlighting its potential as an efficient optical limiter for ultrafast photonic applications.
- 1 October 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (40) , 27428-27438
Selective Ultrafast Excitation and Dephasing of Gap Plasmons into Hot Carriers in Structural Color Generation
Plasmon-induced hot-carriers generated through Landau damping underpin applications in plasmonic optoelectronics, energy conversion, and photocatalysis. However, it remains unclear whether these carriers retain the spatial localization of their parent plasmon modes or rapidly lose this spatial memory through ultrafast scattering and transport. Here, we experimentally probe the spatial and temporal dynamics of plasmon-induced hot-carriers in a strongly confined plasmonic structural color consisting of disordered aluminum nanoparticle ensembles on near-field cavities. Strong interparticle coupling produces hybridized and localized gap plasmon modes with intense nanoscale electromagnetic confinement, which we directly visualize using scattering-type scanning near-field optical microscopy. Ultrafast pump–probe measurements selectively excite a homogeneously broadened sub-ensemble of plasmonic modes, enabling indirect tracking of pump-generated, plasmon-induced hot-carrier dynamics. We observe that hot-carriers undergo only partial spatial delocalization and retain signatures of the initial plasmonic localization for hundreds of picoseconds. The perturbed sub-ensemble reaches maximum line widths of 0.54 ± 0.06 eV (0.36 ± 0.05 eV) under 630 nm (700 nm) excitation. On a phenomenological localization scale from 0 (localized) to 1 (fully delocalized), this corresponds to 0.35 ± 0.10 and 0.09 ± 0.08 for 630 and 700 nm excitation, respectively. The wavelength-dependent fraction shows that the degree of preserved localization is optically tunable, set by the carrier energy. This persistence of spatial memory, likely arising from disorder-induced scattering within the nanoparticle ensemble, reveals an unexpected spatial dimension of hot-carrier dynamics and highlights the role of plasmonic confinement and structural disorder in governing nanoscale energy flow, with implications for hot-carrier-based optoelectronics.
- 1 October 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (40) , 27428-27438
Selective Ultrafast Excitation and Dephasing of Gap Plasmons into Hot Carriers in Structural Color Generation
Plasmon-induced hot-carriers generated through Landau damping underpin applications in plasmonic optoelectronics, energy conversion, and photocatalysis. However, it remains unclear whether these carriers retain the spatial localization of their parent plasmon modes or rapidly lose this spatial memory through ultrafast scattering and transport. Here, we experimentally probe the spatial and temporal dynamics of plasmon-induced hot-carriers in a strongly confined plasmonic structural color consisting of disordered aluminum nanoparticle ensembles on near-field cavities. Strong interparticle coupling produces hybridized and localized gap plasmon modes with intense nanoscale electromagnetic confinement, which we directly visualize using scattering-type scanning near-field optical microscopy. Ultrafast pump–probe measurements selectively excite a homogeneously broadened sub-ensemble of plasmonic modes, enabling indirect tracking of pump-generated, plasmon-induced hot-carrier dynamics. We observe that hot-carriers undergo only partial spatial delocalization and retain signatures of the initial plasmonic localization for hundreds of picoseconds. The perturbed sub-ensemble reaches maximum line widths of 0.54 ± 0.06 eV (0.36 ± 0.05 eV) under 630 nm (700 nm) excitation. On a phenomenological localization scale from 0 (localized) to 1 (fully delocalized), this corresponds to 0.35 ± 0.10 and 0.09 ± 0.08 for 630 and 700 nm excitation, respectively. The wavelength-dependent fraction shows that the degree of preserved localization is optically tunable, set by the carrier energy. This persistence of spatial memory, likely arising from disorder-induced scattering within the nanoparticle ensemble, reveals an unexpected spatial dimension of hot-carrier dynamics and highlights the role of plasmonic confinement and structural disorder in governing nanoscale energy flow, with implications for hot-carrier-based optoelectronics.
- 25 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (19) , 13081-13094
Mixed Triple-Cation Tin and Lead Bromide Perovskites: Bridging Atomic Structure, Lattice Dynamics, and Stability
Tin-based halide perovskites are promising lead-free alternatives for optoelectronic applications, yet their practical implementation is limited by the facile oxidation of Sn(II) to Sn(IV), which compromises environmental stability. Inspired by the success of triple-cation engineering in Pb-based perovskites, we explored the mixed A-site series FA0.80MA0.20–xCsxSnBr3 (x = 0–0.20) and the corresponding Pb analogues, synthesized via a solvent-free mechanochemical route. Powder X-ray diffraction confirmed the formation of phase-pure perovskite compounds, while diffuse reflectance spectroscopy showed only minor changes in the optical band gap (Eg) upon A-site mixing. Multinuclear solid-state nuclear magnetic resonance (NMR) spectroscopy, including high-resolution two-dimensional double-quantum single-quantum 1H NMR spectra, demonstrated homogeneous mixing of formamidinium (FA), methylammonium (MA), and cesium cations without phase segregation or clustering. Quantification of 1H and 13C NMR spectra confirmed the intended cationic compositions, whereas 133Cs, 119Sn, and 207Pb NMR spectra revealed the influence of cation mixing on the local chemical environments. Comparative 79Br nuclear quadrupolar resonance spectroscopy spectra on the Pb analogues further supported a random cation distribution. Ambient stability studies showed that Cs2SnBr6 is the primary degradation product of the Sn series and that moderate Cs incorporation partially improves structural stability, while higher loadings promote degradation. Finally, time-domain terahertz spectroscopy revealed distinct lattice-dynamical responses in the Sn and Pb series, indicating stronger lattice polarization in the Pb compounds and lattice stiffening accompanied by partial stabilization in the Sn compounds upon Cs incorporation. These results establish a direct correlation among homogeneous A-site mixing, local structure, lattice dynamics, and stability, providing mechanistic insight into the design of stable lead-free tin halide perovskites.
- 25 September 2026
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 9 (19) , 13081-13094
Mixed Triple-Cation Tin and Lead Bromide Perovskites: Bridging Atomic Structure, Lattice Dynamics, and Stability
Tin-based halide perovskites are promising lead-free alternatives for optoelectronic applications, yet their practical implementation is limited by the facile oxidation of Sn(II) to Sn(IV), which compromises environmental stability. Inspired by the success of triple-cation engineering in Pb-based perovskites, we explored the mixed A-site series FA0.80MA0.20–xCsxSnBr3 (x = 0–0.20) and the corresponding Pb analogues, synthesized via a solvent-free mechanochemical route. Powder X-ray diffraction confirmed the formation of phase-pure perovskite compounds, while diffuse reflectance spectroscopy showed only minor changes in the optical band gap (Eg) upon A-site mixing. Multinuclear solid-state nuclear magnetic resonance (NMR) spectroscopy, including high-resolution two-dimensional double-quantum single-quantum 1H NMR spectra, demonstrated homogeneous mixing of formamidinium (FA), methylammonium (MA), and cesium cations without phase segregation or clustering. Quantification of 1H and 13C NMR spectra confirmed the intended cationic compositions, whereas 133Cs, 119Sn, and 207Pb NMR spectra revealed the influence of cation mixing on the local chemical environments. Comparative 79Br nuclear quadrupolar resonance spectroscopy spectra on the Pb analogues further supported a random cation distribution. Ambient stability studies showed that Cs2SnBr6 is the primary degradation product of the Sn series and that moderate Cs incorporation partially improves structural stability, while higher loadings promote degradation. Finally, time-domain terahertz spectroscopy revealed distinct lattice-dynamical responses in the Sn and Pb series, indicating stronger lattice polarization in the Pb compounds and lattice stiffening accompanied by partial stabilization in the Sn compounds upon Cs incorporation. These results establish a direct correlation among homogeneous A-site mixing, local structure, lattice dynamics, and stability, providing mechanistic insight into the design of stable lead-free tin halide perovskites.
- 24 September 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (36) , 19508-19518
Decoding the entire (fs–μs) excited-state dynamics and energetics in toxic-metal-free CuInS 2 QDs
Entire (fs–µs) excited state dynamics and energetics could be decoded in red-NIR emitting toxic-metal-free quantum dots (QDs), CuInS 2 QDs.
- 24 September 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (36) , 19508-19518
Decoding the entire (fs–μs) excited-state dynamics and energetics in toxic-metal-free CuInS 2 QDs
Entire (fs–µs) excited state dynamics and energetics could be decoded in red-NIR emitting toxic-metal-free quantum dots (QDs), CuInS 2 QDs.
- 28 August 2026
- Published by Wiley in ChemPhotoChem
- Vol. 10 (9)
Sub‐10 Nanometer Anatase–Brookite Biphasic TiO 2 Nanoparticles Deposited on Wrinkled Nanosilica for Photocatalytic Carbon Dioxide Reduction
In this work, mesoporous silica nanoparticles with centrally radial open pore channels were synthesized, followed by the uniform deposition of small‐sized (5–10 nm) anatase–brookite biphasic TiO 2 semiconductor nanoparticles with varying loadings. The mesoporous silica framework effectively promotes homogeneous dispersion of the TiO 2 nanoparticles and suppresses their aggregation. Comprehensive structural and optical characterizations were performed using UV–vis spectroscopy, powder X‐ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), and high‐resolution transmission electron microscopy (HRTEM). The results confirm the coexistence of anatase and brookite phases uniformly distributed over the mesoporous silica support. The optimized mesoporous silica‐supported anatase–brookite biphasic TiO 2 photocatalyst exhibited superior photocatalytic CO 2 reduction performance in pure water, yielding 23.8 µmol g −1 of CO and 1.54 µmol g −1 of CH 4 without the use of any sacrificial agent or cocatalyst. The synergistic coexistence of anatase and brookite phases within a single particle enhances charge separation through faster electron trapping across the S‐scheme heterojunction interface and lower electron/hole pair recombination, which is believed to be responsible for the significantly improved CO 2 reduction activity.
- 28 August 2026
- Published by Wiley in ChemPhotoChem
- Vol. 10 (9)
Sub‐10 Nanometer Anatase–Brookite Biphasic TiO 2 Nanoparticles Deposited on Wrinkled Nanosilica for Photocatalytic Carbon Dioxide Reduction
In this work, mesoporous silica nanoparticles with centrally radial open pore channels were synthesized, followed by the uniform deposition of small‐sized (5–10 nm) anatase–brookite biphasic TiO 2 semiconductor nanoparticles with varying loadings. The mesoporous silica framework effectively promotes homogeneous dispersion of the TiO 2 nanoparticles and suppresses their aggregation. Comprehensive structural and optical characterizations were performed using UV–vis spectroscopy, powder X‐ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), and high‐resolution transmission electron microscopy (HRTEM). The results confirm the coexistence of anatase and brookite phases uniformly distributed over the mesoporous silica support. The optimized mesoporous silica‐supported anatase–brookite biphasic TiO 2 photocatalyst exhibited superior photocatalytic CO 2 reduction performance in pure water, yielding 23.8 µmol g −1 of CO and 1.54 µmol g −1 of CH 4 without the use of any sacrificial agent or cocatalyst. The synergistic coexistence of anatase and brookite phases within a single particle enhances charge separation through faster electron trapping across the S‐scheme heterojunction interface and lower electron/hole pair recombination, which is believed to be responsible for the significantly improved CO 2 reduction activity.
Chirality Unlocks Sub‐Terahertz Molecular Dynamics In Peptide Nanotubes
Low‐frequency modes in the picosecond range play a key role in molecular recognition and biomolecular function. Here, we investigate how these dynamics at the interfaces of self‐assembled peptide biomaterials relate to fine structural details of the supramolecular assembly. We resolve terahertz and mid‐infrared modes in individual diphenylalanine nanotubes by nanoscale microspectroscopy, uncovering a direct correlation between supramolecular chirality, molecular arrangement, and picosecond dynamics at the nanotube–environment boundary. By combining THz and mid‐IR nanoscopy with a multiscale strategy spanning single nanotubes and bulk measurements, supported by density functional theory calculations, we access the intrinsic picosecond response of peptide assemblies beyond the limits of conventional microscopy and ensemble averaging. Heterochiral (D–L) nanotubes display sharp resonances, whereas homochiral (L–L) nanotubes exhibit a comparatively featureless sub‐THz profile, revealing a clear chirality‐dependent contrast. Mode assignments show that the heterochiral features are dominated by localized torsional and bending motions of phenyl rings relative to the peptide backbone. Overall, chirality‐dependent THz fingerprints emerge as sensitive descriptors of peptide nanotube architecture, while low‐frequency nanospectroscopy provides a route to interrogate biomaterial interfaces under biologically relevant conditions.
Chirality Unlocks Sub‐Terahertz Molecular Dynamics In Peptide Nanotubes
Low‐frequency modes in the picosecond range play a key role in molecular recognition and biomolecular function. Here, we investigate how these dynamics at the interfaces of self‐assembled peptide biomaterials relate to fine structural details of the supramolecular assembly. We resolve terahertz and mid‐infrared modes in individual diphenylalanine nanotubes by nanoscale microspectroscopy, uncovering a direct correlation between supramolecular chirality, molecular arrangement, and picosecond dynamics at the nanotube–environment boundary. By combining THz and mid‐IR nanoscopy with a multiscale strategy spanning single nanotubes and bulk measurements, supported by density functional theory calculations, we access the intrinsic picosecond response of peptide assemblies beyond the limits of conventional microscopy and ensemble averaging. Heterochiral (D–L) nanotubes display sharp resonances, whereas homochiral (L–L) nanotubes exhibit a comparatively featureless sub‐THz profile, revealing a clear chirality‐dependent contrast. Mode assignments show that the heterochiral features are dominated by localized torsional and bending motions of phenyl rings relative to the peptide backbone. Overall, chirality‐dependent THz fingerprints emerge as sensitive descriptors of peptide nanotube architecture, while low‐frequency nanospectroscopy provides a route to interrogate biomaterial interfaces under biologically relevant conditions.
- 12 August 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28 (31) , 19272-19282
Deciphering hot and band-edge hole transfer in CsPbBr 3 perovskite nanocrystals using ultrafast spectroscopic techniques
Perovskite nanomaterials have gained lots of attention in photocatalytic and photovoltaic applications due to their remarkable optoelectronic properties.
- 12 August 2026
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 28 (31) , 19272-19282
Deciphering hot and band-edge hole transfer in CsPbBr 3 perovskite nanocrystals using ultrafast spectroscopic techniques
Perovskite nanomaterials have gained lots of attention in photocatalytic and photovoltaic applications due to their remarkable optoelectronic properties.
- Open Access
- 12 May 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale Advances
- Vol. 8 (12) , 3543-3553
Nonlinear photophysics of PDA-based nanofluid: a potential candidate for two-photon photothermal therapy
This study reports the synthesis and nonlinear photophysics of polydopamine (PDA)-based nanofluid under both CW and fs excitations, paving the way for its integration into biomedical platforms, next-generation photonics, and optoelectronic devices.
- 12 May 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale Advances
- Vol. 8 (12) , 3543-3553
Open AccessNonlinear photophysics of PDA-based nanofluid: a potential candidate for two-photon photothermal therapy
This study reports the synthesis and nonlinear photophysics of polydopamine (PDA)-based nanofluid under both CW and fs excitations, paving the way for its integration into biomedical platforms, next-generation photonics, and optoelectronic devices.