Chuanmei Jiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Chuanmei Jiao has a total of 70 co-authors. Here are the top co-authors by number of shared publications:
- Xilei Chen
College of Environment and Safety Engineering, Qingdao University of Science and Technology, Qingdao, Shandong 266042, P R China
31 shared publications Xilei Chen
College of Environment and Safety Engineering, Qingdao University of Science and Technology, Qingdao, Shandong 266042, P R China
26 shared publicationsJinyong Ren
College of Environment and Safety Engineering, Qingdao University of Science and Technology, Qingdao, Shandong 266042, PR China
11 shared publicationsYaxuan Wang
College of Environment and Safety Engineering, Qingdao University of Science and Technology, Qingdao, Shandong 266042, PR China
11 shared publicationsJunxiu Piao
College of Environment and Safety Engineering, Qingdao University of Science and Technology, Qingdao, Shandong 266042, PR China
10 shared publicationsShaoxiang Li
College of Environment and Safety Engineering Qingdao University of Science and Technology Qingdao China
10 shared publications
Latest Publications
- 17 April 2024
- Published by Elsevier in Chemosphere
- Vol. 357, 142048
Bio-based P–N flame retardant with ZIF-67 in-situ growth on flexible polyurethane foam with excellent fire safety performance
- 17 April 2024
- Published by Elsevier in Chemosphere
- Vol. 357, 142048
Bio-based P–N flame retardant with ZIF-67 in-situ growth on flexible polyurethane foam with excellent fire safety performance
- 2 August 2023
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 5 (8) , 6504-6515
Solvent-Free Synthesis of a Hyperbranched Polyphosphoramide Cocuring Agent and Its Application in Fire-Safe, Mechanically Strong, and Tough Epoxy Resin
- 2 August 2023
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 5 (8) , 6504-6515
Solvent-Free Synthesis of a Hyperbranched Polyphosphoramide Cocuring Agent and Its Application in Fire-Safe, Mechanically Strong, and Tough Epoxy Resin
- 15 February 2023
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 34 (6) , 1829-1843
Phenolic resin microspheres surface‐modified with sodium silicate for reducing fire hazard in TPU composites
- 15 February 2023
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 34 (6) , 1829-1843
Phenolic resin microspheres surface‐modified with sodium silicate for reducing fire hazard in TPU composites
- 21 December 2022
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 34 (4) , 1154-1169
Simultaneously improving the hydrophobic property and flame retardancy of aluminum hypophosphite using rare earth based coupling agent for epoxy composites
A novel hydrophobic rare earth‐based aluminum hypophosphite (AHP) was prepared using rare earth aluminate coupling agent (REA) in a ball mill with a one‐step mechanochemistry method, and used as flame retardant for epoxy resin. It has been found that RaAHP‐4 (AHP was modified by 4 wt% REA) exhibited excellent hydrophobic properties with the water contact angle of 94.58°. The effect of RaAHP‐2 (AHP was modified by 2 wt% REA) and RaAHP‐4 on the flame retardancy, thermal stability, and hydrophobic properties of EP/6RaAHP‐2 and EP/6RaAHP‐4 composites were investigated. It has been found RaAHP‐2 and RaAHP‐4 can significantly improve the flame retardant performance of EP/6RaAHP‐2 and EP/6RaAHP‐4 composites. And the peak heat release rate (PHRR) and total heat release (THR) values of EP/6RaAHP‐4 were reduced by 50.44% and 35.59% compared with pure EP, respectively. Moreover, the maximum peak value of CO production rate from EP/6RaAHP‐4 decreased by 62.64% compared with that from EP/6AHP. The excellent flame retardant effect of EP/6RaAHP‐4 composites was obtained because RaAHP‐4 changed the formation of the char residue layer during the combustion process. In comparison, the compactness, expansion degree, and carbonization quality of the char residue layer from the samples with RaAHP‐2 or RaAHP‐4 have been significantly improved, which acted as a valuable barrier for heat and mass transfer. The above results showed that the one‐step synthesis method had high potential application in the large‐scale production of hydrophobic AHP.
- 21 December 2022
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 34 (4) , 1154-1169
Simultaneously improving the hydrophobic property and flame retardancy of aluminum hypophosphite using rare earth based coupling agent for epoxy composites
A novel hydrophobic rare earth‐based aluminum hypophosphite (AHP) was prepared using rare earth aluminate coupling agent (REA) in a ball mill with a one‐step mechanochemistry method, and used as flame retardant for epoxy resin. It has been found that RaAHP‐4 (AHP was modified by 4 wt% REA) exhibited excellent hydrophobic properties with the water contact angle of 94.58°. The effect of RaAHP‐2 (AHP was modified by 2 wt% REA) and RaAHP‐4 on the flame retardancy, thermal stability, and hydrophobic properties of EP/6RaAHP‐2 and EP/6RaAHP‐4 composites were investigated. It has been found RaAHP‐2 and RaAHP‐4 can significantly improve the flame retardant performance of EP/6RaAHP‐2 and EP/6RaAHP‐4 composites. And the peak heat release rate (PHRR) and total heat release (THR) values of EP/6RaAHP‐4 were reduced by 50.44% and 35.59% compared with pure EP, respectively. Moreover, the maximum peak value of CO production rate from EP/6RaAHP‐4 decreased by 62.64% compared with that from EP/6AHP. The excellent flame retardant effect of EP/6RaAHP‐4 composites was obtained because RaAHP‐4 changed the formation of the char residue layer during the combustion process. In comparison, the compactness, expansion degree, and carbonization quality of the char residue layer from the samples with RaAHP‐2 or RaAHP‐4 have been significantly improved, which acted as a valuable barrier for heat and mass transfer. The above results showed that the one‐step synthesis method had high potential application in the large‐scale production of hydrophobic AHP.
- 14 November 2022
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 444 (Pt A) , 130398
MOF-derived LDH modified flame-retardant polyurethane sponge for high-performance oil-water separation: Interface engineering design based on bioinspiration
- 14 November 2022
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 444 (Pt A) , 130398
MOF-derived LDH modified flame-retardant polyurethane sponge for high-performance oil-water separation: Interface engineering design based on bioinspiration
- 10 November 2022
- Published by Springer Nature in Cellulose
- Vol. 30 (2) , 1245-1264
Facile synthesis of bio-based phosphorus/nitrogen compound for high efficiency flame retardant finishing of cotton fabric
- 10 November 2022
- Published by Springer Nature in Cellulose
- Vol. 30 (2) , 1245-1264
Facile synthesis of bio-based phosphorus/nitrogen compound for high efficiency flame retardant finishing of cotton fabric
- 31 October 2022
- Published by Elsevier in Chemosphere
- Vol. 311 (Pt 1) , 137061
Co-curing preparation of flame retardant and smoke-suppressive epoxy resin with a novel phosphorus-containing ionic liquid
- 31 October 2022
- Published by Elsevier in Chemosphere
- Vol. 311 (Pt 1) , 137061
Co-curing preparation of flame retardant and smoke-suppressive epoxy resin with a novel phosphorus-containing ionic liquid
- 7 September 2022
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 33 (12) , 4302-4316
Surface modification of epichlorohydrin‐modified aramid nanofibers using ionic liquid to improve the fire safety and tensile strength of cotton fabrics
In this article, flame‐retardant cotton fabric was prepared by a step‐by‐step dip‐coating method, in which flame retardants were introduced onto the surface of the cotton fabric by hydrogen bonding association and surface grafting reaction. First, the epichlorohydrin‐modified aramid nanofibers (AEP) were accumulated onto the surface of cotton fabric (Cot/AEP) through hydrogen bond association. Subsequently, the ionic liquid (IL) was grafted onto the surface of AEP to obtain Cot/AEP/IL. The fire safe performance of cotton fabrics was investigated by the limiting oxygen index test (LOI), vertical flammability test (VFT), and cone calorimeter test (CCT), and so forth. The LOI value of Cot/AEP/IL was as high as 29.5%. The VFT results showed that Cot/AEP/IL was self‐extinguishing rather than ignited, leaving a char length of 111 mm. The CCT results demonstrated that the peak heat release rate and total heat release of Cot/AEP/IL decreased by 42.5% and 58.8% compared with untreated cotton fabrics, respectively. The TG test showed that Cot/AEP/IL had more residues left than untreated cotton under both N2 and air atmospheres. The presence of phosphorus enables the cotton fabric to generate an aromatic phosphor carbonaceous structure during the combustion process. In addition, the tensile strength of cotton fabric was tested. After the introduction of AEP/IL, the average tensile strength value of untreated cotton improved from 129 to 167 N in the warp direction and 125–155 N in the weft direction. In summary, the introduction of AEP/IL improved both the flame‐retardant and mechanical properties of the cotton fabric significantly.
- 7 September 2022
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 33 (12) , 4302-4316
Surface modification of epichlorohydrin‐modified aramid nanofibers using ionic liquid to improve the fire safety and tensile strength of cotton fabrics
In this article, flame‐retardant cotton fabric was prepared by a step‐by‐step dip‐coating method, in which flame retardants were introduced onto the surface of the cotton fabric by hydrogen bonding association and surface grafting reaction. First, the epichlorohydrin‐modified aramid nanofibers (AEP) were accumulated onto the surface of cotton fabric (Cot/AEP) through hydrogen bond association. Subsequently, the ionic liquid (IL) was grafted onto the surface of AEP to obtain Cot/AEP/IL. The fire safe performance of cotton fabrics was investigated by the limiting oxygen index test (LOI), vertical flammability test (VFT), and cone calorimeter test (CCT), and so forth. The LOI value of Cot/AEP/IL was as high as 29.5%. The VFT results showed that Cot/AEP/IL was self‐extinguishing rather than ignited, leaving a char length of 111 mm. The CCT results demonstrated that the peak heat release rate and total heat release of Cot/AEP/IL decreased by 42.5% and 58.8% compared with untreated cotton fabrics, respectively. The TG test showed that Cot/AEP/IL had more residues left than untreated cotton under both N2 and air atmospheres. The presence of phosphorus enables the cotton fabric to generate an aromatic phosphor carbonaceous structure during the combustion process. In addition, the tensile strength of cotton fabric was tested. After the introduction of AEP/IL, the average tensile strength value of untreated cotton improved from 129 to 167 N in the warp direction and 125–155 N in the weft direction. In summary, the introduction of AEP/IL improved both the flame‐retardant and mechanical properties of the cotton fabric significantly.