Chunming Song
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Chunming Song has a total of 33 co-authors. Here are the top co-authors by number of shared publications:
Haotian Zhang
3 shared publications- Haotian Zhang
State Key Laboratory of Disaster Prevention & Mitigation of Explosion & Impact, Army Engineering University of PLA, Nanjing 210007, China
2 shared publications Mingyang Wang
2 shared publications- Mingyang Wang
State Key Laboratory of Disaster Prevention & Mitigation of Explosion & Impact
2 shared publications Xiaoning Yang
2 shared publicationsYihao Cheng
2 shared publications
Latest Publications
- Open Access
Sound Insulation Performance of Green Cement Mortar Using a Novel Portable Testing Device
The conventional equipment for assessing sound insulation performance is costly and entails intricate operational procedures, restricting its applicability in the preliminary comparison and screening of materials. A novel testing device was independently developed to achieve a simple evaluation of the sound insulation performance of building materials. Experimental investigations were conducted on a set of green cement mortar samples, which are modified by adding expanded vermiculite, EPS beads and EPDM rubber granulate. The sound pressure time-history responses of simulating building noise before and after sound insulation were tested, and the spectral characteristics of the sound insulation amount were analyzed. The apparatus-specific average and weighted sound insulation were used to quantitatively estimate the comprehensive sound insulation level. The sound insulation mechanisms were discussed in combination with the structural dynamic parameters from vibration test. The results show that the developed device features favorable portability and operability, while repeated measurements on the same specimen confirm stable measurement repeatability. The sound insulation performance of various mortar specimens exhibits pronounced frequency dependence, characterized by a low level at low frequencies and a marked increase at high frequencies, accompanied by a dip induced by structural resonance near the structural fundamental frequency. All three green additives can improve the comprehensive sound insulation performance of the cement mortar, with rubber granulate increasing the average and weighted sound insulation amounts by 0.62 dB (8.00%) and 4.10 dB (76.64%), respectively, showing the most prominent modification effect. Mechanism analysis reveals that the incorporation of green admixtures increases the damping ratio of specimens to boost sound energy dissipation, while lowering their fundamental frequency to broaden the high-frequency sound insulation range. The findings can provide references for the optimized design of green sound-insulating mortar and the engineering implementation of portable sound insulation testing technology.
Open AccessSound Insulation Performance of Green Cement Mortar Using a Novel Portable Testing Device
The conventional equipment for assessing sound insulation performance is costly and entails intricate operational procedures, restricting its applicability in the preliminary comparison and screening of materials. A novel testing device was independently developed to achieve a simple evaluation of the sound insulation performance of building materials. Experimental investigations were conducted on a set of green cement mortar samples, which are modified by adding expanded vermiculite, EPS beads and EPDM rubber granulate. The sound pressure time-history responses of simulating building noise before and after sound insulation were tested, and the spectral characteristics of the sound insulation amount were analyzed. The apparatus-specific average and weighted sound insulation were used to quantitatively estimate the comprehensive sound insulation level. The sound insulation mechanisms were discussed in combination with the structural dynamic parameters from vibration test. The results show that the developed device features favorable portability and operability, while repeated measurements on the same specimen confirm stable measurement repeatability. The sound insulation performance of various mortar specimens exhibits pronounced frequency dependence, characterized by a low level at low frequencies and a marked increase at high frequencies, accompanied by a dip induced by structural resonance near the structural fundamental frequency. All three green additives can improve the comprehensive sound insulation performance of the cement mortar, with rubber granulate increasing the average and weighted sound insulation amounts by 0.62 dB (8.00%) and 4.10 dB (76.64%), respectively, showing the most prominent modification effect. Mechanism analysis reveals that the incorporation of green admixtures increases the damping ratio of specimens to boost sound energy dissipation, while lowering their fundamental frequency to broaden the high-frequency sound insulation range. The findings can provide references for the optimized design of green sound-insulating mortar and the engineering implementation of portable sound insulation testing technology.
- 12 February 2025
- Published by Elsevier in Thin-Walled Structures
- Vol. 211
Dynamic similitude theory for predicting the response of liquid storage structure subjected to explosion-induced ground shock
- 12 February 2025
- Published by Elsevier in Thin-Walled Structures
- Vol. 211
Dynamic similitude theory for predicting the response of liquid storage structure subjected to explosion-induced ground shock
- Open Access
Carbon Neutrality Benefit by Developing Underground Space and Overlying Green Land: Calculation Methodology and Case Study
The advancement of ecological civilization has heightened the urgency for urban emission reductions. Currently, there is a significant gap in the quantitative assessment of the carbon neutrality benefit of developing underground space and overlaying urban green land. To address this, this study presents a carbon neutrality benefit assessment model based on building lifecycle theory. The model quantifies the carbon emissions of typical public buildings utilizing aboveground/underground space and assesses the carbon sink impacts of green lands. Notably, it introduces the innovative parameter of characteristic time to evaluate how the comprehensive development of underground space and aboveground urban green land contributes to achieving carbon neutrality. Case analysis of a typical shopping mall in northern China revealed that, in comparison to aboveground buildings, underground buildings exhibit higher energy consumption for construction and lighting; however, they demonstrate superior thermal performance, providing warmth in winter and coolness in summer. Furthermore, urban green spaces of equivalent building area can sequester a portion of the carbon emissions produced by underground buildings, resulting in a lower overall carbon emission profile for the underground space system throughout its lifecycle compared to that of the aboveground space system. Consequently, the development of underground spaces plays a crucial role in advancing carbon neutral objectives. The study also emphasizes the importance of selecting plant communities with enhanced carbon sequestration capacities and developing corresponding green spaces to better meet carbon neutrality objectives. This research offers a novel perspective for evaluating the carbon neutrality benefits of underground space systems, providing valuable design guidance for integrating urban underground and aboveground spaces.
Open AccessCarbon Neutrality Benefit by Developing Underground Space and Overlying Green Land: Calculation Methodology and Case Study
The advancement of ecological civilization has heightened the urgency for urban emission reductions. Currently, there is a significant gap in the quantitative assessment of the carbon neutrality benefit of developing underground space and overlaying urban green land. To address this, this study presents a carbon neutrality benefit assessment model based on building lifecycle theory. The model quantifies the carbon emissions of typical public buildings utilizing aboveground/underground space and assesses the carbon sink impacts of green lands. Notably, it introduces the innovative parameter of characteristic time to evaluate how the comprehensive development of underground space and aboveground urban green land contributes to achieving carbon neutrality. Case analysis of a typical shopping mall in northern China revealed that, in comparison to aboveground buildings, underground buildings exhibit higher energy consumption for construction and lighting; however, they demonstrate superior thermal performance, providing warmth in winter and coolness in summer. Furthermore, urban green spaces of equivalent building area can sequester a portion of the carbon emissions produced by underground buildings, resulting in a lower overall carbon emission profile for the underground space system throughout its lifecycle compared to that of the aboveground space system. Consequently, the development of underground spaces plays a crucial role in advancing carbon neutral objectives. The study also emphasizes the importance of selecting plant communities with enhanced carbon sequestration capacities and developing corresponding green spaces to better meet carbon neutrality objectives. This research offers a novel perspective for evaluating the carbon neutrality benefits of underground space systems, providing valuable design guidance for integrating urban underground and aboveground spaces.
- 22 February 2024
- Published by Elsevier in Materials Letters
- Vol. 362
Low-velocity impact responses of UHMWPE fiber/epoxy laminates with plasma treatment and polypyrrole grafting
- 22 February 2024
- Published by Elsevier in Materials Letters
- Vol. 362
Low-velocity impact responses of UHMWPE fiber/epoxy laminates with plasma treatment and polypyrrole grafting
- 22 November 2023
- Published by Elsevier in Composite Structures
- Vol. 328
Effect of stitch density on the damage inhibition and compression strength after high-velocity impact of UHMWPE fiber composites
- 22 November 2023
- Published by Elsevier in Composite Structures
- Vol. 328
Effect of stitch density on the damage inhibition and compression strength after high-velocity impact of UHMWPE fiber composites
- Open Access
- 22 June 2022
- Published by Wiley in Shock and Vibration
- Vol. 2022, 1-14
High-Speed Penetration Test and Numerical Simulation of Ceramic-Reactive Powder Concrete Composite Target
To study the protective performance of ceramic materials against the high-speed penetration of projectiles, seven ceramic-reactive powder concrete (C-RPC) composite targets were designed. Using a 100/30 mm two-stage light-gas gun, penetration tests were performed at 1.4–2.0 km/s. The results showed that the penetration depth of the C-RPC target body first increased and then decreased as the target speed increased, and the corresponding reverse penetration speed was between 1743.2 m/s and 1803.9 m/s. LS-DYNA software was used to perform a wide-speed numerical simulation study of a projectile’s high-speed penetration of the composite target, focusing on the analysis of the deformation, mass loss, passivation, and penetration depth of the projectile. Changes in the parameters were compared with the experimental results of a C-RPC penetration test, which together revealed the changes in the damaging effect of the missile’s high-speed penetration of the C-RPC composite target. It provided a damage analysis of the high-speed/super-high-speed penetration of the projectile, which provides a reference for targeted protection research.
- 22 June 2022
- Published by Wiley in Shock and Vibration
- Vol. 2022, 1-14
Open AccessHigh-Speed Penetration Test and Numerical Simulation of Ceramic-Reactive Powder Concrete Composite Target
To study the protective performance of ceramic materials against the high-speed penetration of projectiles, seven ceramic-reactive powder concrete (C-RPC) composite targets were designed. Using a 100/30 mm two-stage light-gas gun, penetration tests were performed at 1.4–2.0 km/s. The results showed that the penetration depth of the C-RPC target body first increased and then decreased as the target speed increased, and the corresponding reverse penetration speed was between 1743.2 m/s and 1803.9 m/s. LS-DYNA software was used to perform a wide-speed numerical simulation study of a projectile’s high-speed penetration of the composite target, focusing on the analysis of the deformation, mass loss, passivation, and penetration depth of the projectile. Changes in the parameters were compared with the experimental results of a C-RPC penetration test, which together revealed the changes in the damaging effect of the missile’s high-speed penetration of the C-RPC composite target. It provided a damage analysis of the high-speed/super-high-speed penetration of the projectile, which provides a reference for targeted protection research.
- Open Access
- 1 January 2019
- Published by Wiley in Shock and Vibration
- Vol. 2019 (1)
Experimental and Numerical Simulation Study on the Antipenetration Properties of Fiber Ceramic‐Reactive Powder Concrete Composite Targets
Composite materials have been demonstrated to possess excellent antipenetration capacities, but the existing studies have not involved the penetration characteristics of ceramic‐concrete composite targets. To investigate the antipenetration mechanisms of fiber ceramic‐reactive powder concrete (FC‐RPC) composite targets, three pieces of FC‐RPC composite targets were designed to perform penetration tests. Antipenetration tests were performed with a special howitzer with a diameter of 125 mm. The test parameters, such as the impact velocity, failure pattern of projectiles, penetration depth, crater diameter, and failure model of targets, were obtained. It was found that the FC‐RPC targets exhibited an excellent antipenetration capacity and failed in a ductile manner, the target caused an obvious erosion effect on projectiles at low speed (i.e., 375 m/s), and the antipenetration performance of the composite target was improved by increasing the thickness of the FC target. Simultaneously, numerical simulations of FC‐RPC targets subjected to projectile impact were carried out by using LS‐DYNA codes. Separately, combined and integrated finite element models were used to analyze the effect of the fiber layer in the composite target. The numerical results of the combined model were in good agreement with the experimental data, and the reliabilities of simulation were validated. The differential protection factor of the FC‐RPC targets was obtained based on the penetration tests and numerical simulation, and an empirical formula for multilayer targets was presented.
- 1 January 2019
- Published by Wiley in Shock and Vibration
- Vol. 2019 (1)
Open AccessExperimental and Numerical Simulation Study on the Antipenetration Properties of Fiber Ceramic‐Reactive Powder Concrete Composite Targets
Composite materials have been demonstrated to possess excellent antipenetration capacities, but the existing studies have not involved the penetration characteristics of ceramic‐concrete composite targets. To investigate the antipenetration mechanisms of fiber ceramic‐reactive powder concrete (FC‐RPC) composite targets, three pieces of FC‐RPC composite targets were designed to perform penetration tests. Antipenetration tests were performed with a special howitzer with a diameter of 125 mm. The test parameters, such as the impact velocity, failure pattern of projectiles, penetration depth, crater diameter, and failure model of targets, were obtained. It was found that the FC‐RPC targets exhibited an excellent antipenetration capacity and failed in a ductile manner, the target caused an obvious erosion effect on projectiles at low speed (i.e., 375 m/s), and the antipenetration performance of the composite target was improved by increasing the thickness of the FC target. Simultaneously, numerical simulations of FC‐RPC targets subjected to projectile impact were carried out by using LS‐DYNA codes. Separately, combined and integrated finite element models were used to analyze the effect of the fiber layer in the composite target. The numerical results of the combined model were in good agreement with the experimental data, and the reliabilities of simulation were validated. The differential protection factor of the FC‐RPC targets was obtained based on the penetration tests and numerical simulation, and an empirical formula for multilayer targets was presented.
- 9 October 2013
- Published by American Society of Civil Engineers (ASCE)
- p. 422-429
Analysis of Elastic Support Beam on Dynamic Load
The differences of boundary restraints directly affect the dynamic responses and bearing capacity. The mechanics models of beams with flexible supports were established, and elastic supports, lumped masses at the beams ends and non-symmetric supports were taken into account. Numerical analysis of the model was conducted by using the Euler-Bernoulli's theory and Lagrange method. The characteristic equation and the eigen-functions of the supported beam were derived. The responses of beams subjected to any dynamic loads were explored. Through the comparison with results from the existing references calculation results, the accuracy of the present method is validated. Then, the effect of the boundary restrained stiffness on the dynamic responses of beams is analyzed. The analyses show that flexible supports have great effect on the performances of beams, both horizontal and vertical elastic supports can reduce the dynamic coefficient of displacement. The optimization of added masses and their positions on the beam can improve the impact resistance of beam.
- 9 October 2013
- Published by American Society of Civil Engineers (ASCE)
- p. 422-429
Analysis of Elastic Support Beam on Dynamic Load
The differences of boundary restraints directly affect the dynamic responses and bearing capacity. The mechanics models of beams with flexible supports were established, and elastic supports, lumped masses at the beams ends and non-symmetric supports were taken into account. Numerical analysis of the model was conducted by using the Euler-Bernoulli's theory and Lagrange method. The characteristic equation and the eigen-functions of the supported beam were derived. The responses of beams subjected to any dynamic loads were explored. Through the comparison with results from the existing references calculation results, the accuracy of the present method is validated. Then, the effect of the boundary restrained stiffness on the dynamic responses of beams is analyzed. The analyses show that flexible supports have great effect on the performances of beams, both horizontal and vertical elastic supports can reduce the dynamic coefficient of displacement. The optimization of added masses and their positions on the beam can improve the impact resistance of beam.