Li Pan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Li Pan has a total of 230 co-authors. Here are the top co-authors by number of shared publications:
- Yue-Sheng Li
Tianjin University
59 shared publications - Bin Wang
Tianjin University
24 shared publications - Zhe Ma
Tianjin University
20 shared publications Fei Wang
16 shared publicationsHuan Gao
15 shared publicationsYuesheng Li
15 shared publications
Latest Publications
- 18 November 2026
- Published by Elsevier in Polymer Degradation and Stability
Aryl-Functionalized Cyclic Olefin Copolymers with Intrinsic Thermo-Oxidative Stability
- 18 November 2026
- Published by Elsevier in Polymer Degradation and Stability
Aryl-Functionalized Cyclic Olefin Copolymers with Intrinsic Thermo-Oxidative Stability
- 20 October 2026
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 17 (40) , 4353-4362
Ethylene (co)polymerization catalyzed by highly active arylimido-vanadium( v ) complexes bearing tridentate ligands
A novel (arylimido)vanadium(v) complex bearing tridentate ligand with a –SPh side arm exhibited rather high catalytic activities toward ethylene polymerization (up to 285 kg PE mmol V −1 h −1 ).
- 20 October 2026
- Published by Royal Society of Chemistry (RSC) in Polymer Chemistry
- Vol. 17 (40) , 4353-4362
Ethylene (co)polymerization catalyzed by highly active arylimido-vanadium( v ) complexes bearing tridentate ligands
A novel (arylimido)vanadium(v) complex bearing tridentate ligand with a –SPh side arm exhibited rather high catalytic activities toward ethylene polymerization (up to 285 kg PE mmol V −1 h −1 ).
- 21 September 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (38) , 20494-20506
Simultaneous Compatibilization and Toughening of Renewable PLA/PA11 Blend via Core-Shell Biobased Nanosilica-Filled Elastomer
Poly(lactic acid) (PLA) composites are attractive candidates for sustainable applications. However, achieving an optimal balance between toughness and heat resistance without sacrificing biobased content remains a persistent challenge. Herein, we develop PLA composites exhibiting concurrently high stiffness, toughness, and heat resistance by incorporating renewable polyamide11 (PA11) and a biobased amino-functionalized nanosilica/epoxy elastomer hybrid (Ex). The influence of filler loading on mechanical performance, rheological behavior, and phase morphology of the PLA/PA11 blends is systematically investigated. The optimized formulation, 55-5E10 (comprising 5 wt % modified elastomer E10 with 10 wt % SiO2), achieves a tensile strength of 61.7 MPa, a notched impact strength of 49.8 kJ/m2, and an elongation at break of 399%. These marked enhancements are attributed to the formation of a co-continuous phase architecture, improved interfacial compatibility, and the preferential localization of EMG and EMG@SiO2 particles within the PA11 domains, featuring a multi-core architecture. This work offers a novel pathway for engineering mechanically robust PLA/PA11 composites, broadening their potential as fossil-free alternatives for load-bearing applications.
- 21 September 2026
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 65 (38) , 20494-20506
Simultaneous Compatibilization and Toughening of Renewable PLA/PA11 Blend via Core-Shell Biobased Nanosilica-Filled Elastomer
Poly(lactic acid) (PLA) composites are attractive candidates for sustainable applications. However, achieving an optimal balance between toughness and heat resistance without sacrificing biobased content remains a persistent challenge. Herein, we develop PLA composites exhibiting concurrently high stiffness, toughness, and heat resistance by incorporating renewable polyamide11 (PA11) and a biobased amino-functionalized nanosilica/epoxy elastomer hybrid (Ex). The influence of filler loading on mechanical performance, rheological behavior, and phase morphology of the PLA/PA11 blends is systematically investigated. The optimized formulation, 55-5E10 (comprising 5 wt % modified elastomer E10 with 10 wt % SiO2), achieves a tensile strength of 61.7 MPa, a notched impact strength of 49.8 kJ/m2, and an elongation at break of 399%. These marked enhancements are attributed to the formation of a co-continuous phase architecture, improved interfacial compatibility, and the preferential localization of EMG and EMG@SiO2 particles within the PA11 domains, featuring a multi-core architecture. This work offers a novel pathway for engineering mechanically robust PLA/PA11 composites, broadening their potential as fossil-free alternatives for load-bearing applications.
- Open Access
- 20 September 2026
- Published by Elsevier in SSRN Electronic Journal
Aryl-Functionalized Cyclic Olefin Copolymers with High Intrinsic Thermo-Oxidative Stability
As cyclic olefin copolymers (COCs) gain traction in precision applications that demand long-term thermal stability, understanding their degradation under elevated temperatures and oxidative conditions is essential. High-temperature sterilization induces thermo-oxidative degradation, which causes chain scission, yellowing, embrittlement, loss of transparency, and risks drug contamination, ultimately limiting service life and reliability. However, conventional small-molecule antioxidants suffer from migration and leaching, undermining long-term stability and safety. To address these limitations, we designed intrinsically stabilized COCs via the copolymerization of ethylene with tetracyclododecene, and aryl-functionalized 1-octene comonomers bearing triphenylamine, anthracene, or carbazole groups, using a high-performance catalyst system. The resulting COCs retain high transparency and thermal properties while exhibiting markedly enhanced thermo-oxidative stability. Accelerated aging tests at 120 °C revealed that the aryl-functionalized COCs effectively suppress chain scission, carbonyl formation, and loss of transparency compared to unmodified COC. Furthermore, the aryl-functionalized COCs retain excellent optical transparency after autoclave sterilization at 121 °C, and exhibit no detectable leachables upon extended immersion in n-hexane or hot physiological saline, in stark contrast to the commercial COC containing migratory antioxidants. Density functional theory calculations reveal distinct stabilization mechanisms: triphenylamine and carbazole groups quench peroxyl radicals via single-electron transfer, whereas anthracene operates through an oxidative addition-elimination pathway, yielding a resonance-stabilized anthracen-9-oxyl radical and water. This mechanistic insight provides a molecular rationale for the experimentally observed antioxidant efficiencies.
- 20 September 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessAryl-Functionalized Cyclic Olefin Copolymers with High Intrinsic Thermo-Oxidative Stability
As cyclic olefin copolymers (COCs) gain traction in precision applications that demand long-term thermal stability, understanding their degradation under elevated temperatures and oxidative conditions is essential. High-temperature sterilization induces thermo-oxidative degradation, which causes chain scission, yellowing, embrittlement, loss of transparency, and risks drug contamination, ultimately limiting service life and reliability. However, conventional small-molecule antioxidants suffer from migration and leaching, undermining long-term stability and safety. To address these limitations, we designed intrinsically stabilized COCs via the copolymerization of ethylene with tetracyclododecene, and aryl-functionalized 1-octene comonomers bearing triphenylamine, anthracene, or carbazole groups, using a high-performance catalyst system. The resulting COCs retain high transparency and thermal properties while exhibiting markedly enhanced thermo-oxidative stability. Accelerated aging tests at 120 °C revealed that the aryl-functionalized COCs effectively suppress chain scission, carbonyl formation, and loss of transparency compared to unmodified COC. Furthermore, the aryl-functionalized COCs retain excellent optical transparency after autoclave sterilization at 121 °C, and exhibit no detectable leachables upon extended immersion in n-hexane or hot physiological saline, in stark contrast to the commercial COC containing migratory antioxidants. Density functional theory calculations reveal distinct stabilization mechanisms: triphenylamine and carbazole groups quench peroxyl radicals via single-electron transfer, whereas anthracene operates through an oxidative addition-elimination pathway, yielding a resonance-stabilized anthracen-9-oxyl radical and water. This mechanistic insight provides a molecular rationale for the experimentally observed antioxidant efficiencies.
- 21 April 2026
- Published by Elsevier in Polymer Degradation and Stability
- Vol. 250
Functional polypropylene with dual-antiaging and self-reporting properties
- 21 April 2026
- Published by Elsevier in Polymer Degradation and Stability
- Vol. 250
Functional polypropylene with dual-antiaging and self-reporting properties
- 14 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 4 (4) , 1190-1202
High Refractive Index, Colorless Titanium Dioxide/Cyclic Olefin Polymer Composites via Designed Reactive Sites
- 14 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Optical Materials
- Vol. 4 (4) , 1190-1202
High Refractive Index, Colorless Titanium Dioxide/Cyclic Olefin Polymer Composites via Designed Reactive Sites
- 13 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (8) , 5991-5999
Intrinsic Sulfur-Containing Thermoplastic Cyclic Olefin Polymers with High Refractive Index, Colorless Transparency, and Thermal Stability
- 13 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (8) , 5991-5999
Intrinsic Sulfur-Containing Thermoplastic Cyclic Olefin Polymers with High Refractive Index, Colorless Transparency, and Thermal Stability
- Open Access
- 11 February 2026
- Published by Science China Press., Co. Ltd. in SCIENTIA SINICA Chimica
- Vol. 56 (3) , 597-609
Research progress on compatibilizers for physical blending recycling of polyolefins
摘要 因经济性强、低耗能等优势,物理共混回收是聚烯烃材料循环利用的重要途径. 然而,废弃聚烯烃共混物的组分间易存在相容性差等问题,进而导致共混物界面结合力弱、力学性能显著下降,严重限制其产业化应用. 开发高效增容剂是提升聚烯烃共混物的界面相容性和材料力学性能的关键. 近年来,增容剂设计合成与共混体系调控研究取得重要进展,一系列新型增容剂通过晶区锚定、链缠结及相态调控等机制,有效促进了多组分聚烯烃的界面相容与性能提升,助力废弃聚烯烃高值化回收利用. 本文系统论述了增容剂的设计合成策略与性能调控机制,并展望面向规模化应用的多功能增容剂研发方向,以期为聚烯烃废弃物的可持续升级回收提供理论和技术指导.
- 11 February 2026
- Published by Science China Press., Co. Ltd. in SCIENTIA SINICA Chimica
- Vol. 56 (3) , 597-609
Open AccessResearch progress on compatibilizers for physical blending recycling of polyolefins
摘要 因经济性强、低耗能等优势,物理共混回收是聚烯烃材料循环利用的重要途径. 然而,废弃聚烯烃共混物的组分间易存在相容性差等问题,进而导致共混物界面结合力弱、力学性能显著下降,严重限制其产业化应用. 开发高效增容剂是提升聚烯烃共混物的界面相容性和材料力学性能的关键. 近年来,增容剂设计合成与共混体系调控研究取得重要进展,一系列新型增容剂通过晶区锚定、链缠结及相态调控等机制,有效促进了多组分聚烯烃的界面相容与性能提升,助力废弃聚烯烃高值化回收利用. 本文系统论述了增容剂的设计合成策略与性能调控机制,并展望面向规模化应用的多功能增容剂研发方向,以期为聚烯烃废弃物的可持续升级回收提供理论和技术指导.
- 5 February 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (4) , 2113-2125
Designing Resource-Efficient Polypropylene-Based Elastomers via Moderately Selective Catalyst for Toughening and Compatibilization
- 5 February 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (4) , 2113-2125
Designing Resource-Efficient Polypropylene-Based Elastomers via Moderately Selective Catalyst for Toughening and Compatibilization
- Open Access
- 2 January 2026
- Published by American Chemical Society (ACS) in Polymer Science & Technology
- Vol. 2 (6) , 390-405
Sustainable and High-Performance Polylactide/Polycarbonate Blends with Enhanced Toughness and Thermal Stability via Stereocomplexation and Phase Continuity
Durable polylactide (PLA)-based materials are highly pursued for replacing conventional petroleum-based plastics. However, developing a tough and heat-resistant PLA blend remains a significant challenge. Herein, a series of high-performance PLA-based blends were prepared through melt blending of bio-based polycarbonate (PC), poly(d-lactic acid) (PDLA), and a compatibilizer (BPM). Phase morphology, crystallization behavior, mechanical properties, and thermal resistance were systematically analyzed. A novel dual heat-resistant network was constructed, comprising a continuous PC phase and PDLA/PLA stereocomplexation. In this network, the stereocomplexation creates a 3D network restricting the amorphous PLA chain mobility, while the PC phase acts as a heat-resistant framework, collectively enhancing thermal stability. Moreover, the addition of BPM enhances the toughness and interfacial adhesion between PC and PLA phases, resulting in substantial improvements in mechanical properties. The optimized blend achieved a heat deflection temperature of 106.5 °C, an impact strength of 7.5 kJ/m2, and an elongation at break of 113.6%.
- 2 January 2026
- Published by American Chemical Society (ACS) in Polymer Science & Technology
- Vol. 2 (6) , 390-405
Open AccessSustainable and High-Performance Polylactide/Polycarbonate Blends with Enhanced Toughness and Thermal Stability via Stereocomplexation and Phase Continuity
Durable polylactide (PLA)-based materials are highly pursued for replacing conventional petroleum-based plastics. However, developing a tough and heat-resistant PLA blend remains a significant challenge. Herein, a series of high-performance PLA-based blends were prepared through melt blending of bio-based polycarbonate (PC), poly(d-lactic acid) (PDLA), and a compatibilizer (BPM). Phase morphology, crystallization behavior, mechanical properties, and thermal resistance were systematically analyzed. A novel dual heat-resistant network was constructed, comprising a continuous PC phase and PDLA/PLA stereocomplexation. In this network, the stereocomplexation creates a 3D network restricting the amorphous PLA chain mobility, while the PC phase acts as a heat-resistant framework, collectively enhancing thermal stability. Moreover, the addition of BPM enhances the toughness and interfacial adhesion between PC and PLA phases, resulting in substantial improvements in mechanical properties. The optimized blend achieved a heat deflection temperature of 106.5 °C, an impact strength of 7.5 kJ/m2, and an elongation at break of 113.6%.