CSCássia Sidney Santana

Cássia Sidney Santana

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Cássia Sidney Santana has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Spatial Atomic Layer Deposition to Manufacture Catalyst Coated Electrodes for PEM Water Electrolysis with Ultra-Low Loadings of Iridium

    by Oscar Diaz-Morales, Jie Shen, Cássia Sidney Santana, Frennie Bens, Bas Dijk

    Proton Exchange Membrane Water Electrolysis (PEMWE) has great potential to produce hydrogen with renewable energy sources (green hydrogen production) because the technology can operate at high-power density with rapid startup times. However, PEMWE relies on scarce materials. Iridium usage as catalyst in PEMWE is a major point of attention because this metal is the second scarcest in our planet. State-of-art PEM electrolysers use approximately 2.5 g of iridium per kilowatt of power, this would translate in requiring >100% of the yearly global iridium production to sustain green hydrogen production at the multi-gigawatt power level [1]. Therefore, it is key to reduce the usage of iridium in PEMWE and to manufacture components to ease up recyclability upon reaching end of life. In this work, we show our advances in manufacturing anodes for PEMWE with (ultra-)low loadings of iridium. The anodes were made by depositing iridium thin films on porous transport layers (catalyst coated electrode, CCE) by Spatial Atomic Layer Deposition (sALD) [2]. This manufacturing approach allows atomic level control over the amount of material deposited and it ensures high uniformity and conformality of the deposited films. By manufacturing CCEs with sALD, we reduced the amount of iridium used in the PEM electrolysis more than 100 times compared to the state of the art. Importantly, we found that the structure of the porous substrate, the manufacturing process and the usage of protection coatings are crucial to get good performance and enhance the durability of CCEs in PEMWE (see Figure 1). Our work showcases the potential of using sALD to produce high performing and durable PEMWE electrodes. This manufacturing approach can minimize the usage of iridium in PEM electrolysers and has the high throughput needed to fulfill the demand for components that will come along with the multi-gigawatt electrolysers deployment envisioned in the near future. Furthermore, the usage of CCE in PEMWE separates the inorganic components of the electrolyser (i.e. catalyst layer and porous transport layer) from the organic part (i.e. proton exchange membrane), which will make it easier to recycle PEMWE components. References [1] Gavrilova, A., Wieclawska, S.M. “Towards a green future. Part 2” (2021). TNO report 21-12158. [2] Shirvanian, A. P. Thin film porous catalyst sheet, WO 2023287284 A1, 19 January 2023. Figure 1


  • Engineered Porous Transport Electrode for Proton Exchange Membrane Water Electrolysers

    by Cássia Sidney Santana, Frennie Bens, Jie Shen, Bas Dijk, Oscar Diaz-Morales

    Proton Exchange Membrane Water Electrolysers (PEMWEs) is among the most promising approaches for green hydrogen production due to its rapid response times and high-power density operation, which make this electrolysis technology well-suited to harvest the intermittent power from wind and solar plants. Nevertheless, the commercial breakthrough of PEMWE technology continues to face barriers due to its costs [1]. The porous transport layer (PTL) is one of the PEMWE components that facilitates the transport of incoming water to the catalyst layer and the removal of the product gases, hence it is very important for good electrolyser performance. The state-of-the-art PTLs are manufactured by high temperature sintering of titanium fibers or powders, which can generate oxidized surfaces that will reduce PEMWE performance. Furthermore, titanium is listed by the European Union as a critical raw material since 2020 [2], so it is advisable to reduce the amounts of its use to produce PTLs. Additionally, the (micro)structure of state-of-the-art PTLs is not optimized for efficient liquid and gas transport in electrolysis. The manufacturing process plays a key role in achieving PTLs with optimized liquid and gas transport as well as reducing the usage of titanium. In this work, we used lithography to manufacture PTLs in which the (micro-)structure can be optimized and the usage of titanium metal can be significantly reduced. The lithography manufactured PTLs were used as substrates to produce catalyst-coated electrodes (CCE) with (ultra-)low loadings of iridium and the PEMWE performance was evaluated, respect to CCEs manufactured on commercial PTLs. We demonstrate similar performance of the CCEs manufactured with the engineered PTL, with the advantage of using less titanium and being able to tune the (micro-)structure of the component. References: [1] Babic, U., Suermann, M., Büchi, F. N., Gubler, L., & Schmidt, T. J. (2017). Critical review - identifying critical gaps for polymer electrolyte water electrolysis development. Journal of The Electrochemical Society, 164(4), F387. [2] European Commission, Directorate-General for Internal Market, Industry, Entrepreneurship and SMEs, Blengini, G., El Latunussa, C., Eynard, U. et al., Study on the EU's list of critical raw materials (2020) – Final report, Publications Office of the European Union, 2020, https://data.europa.eu/doi/10.2873/11619 Figure 1

  • Open Access

    Bio‐electrocatalytic Alkene Reduction Using Ene‐Reductases with Methyl Viologen as Electron Mediator

    by Zheng Wei, Tanja Knaus, Matteo Damian, Yuxin Liu, Cássia S. Santana, Ning Yan, Gadi Rothenberg, Francesco G. Mutti

    Asymmetric hydrogenation of alkene moieties is important for the synthesis of chiral molecules, but achieving high stereoselectivity remains a challenge. Biocatalysis using ene‐reductases (EReds) offers a viable solution. However, the need for NAD(P)H cofactors limits large‐scale applications. Here, we explored an electrochemical alternative for recycling flavin‐containing EReds using methyl viologen as a mediator. For this, we built a bio‐electrocatalytic setup with an H‐type glass reactor cell, proton exchange membrane, and carbon cloth electrode. Experimental results confirm the mediator's electrochemical reduction and enzymatic consumption. Optimization showed increased product concentration at longer reaction times with better reproducibility within 4–6 h. We tested two enzymes, Pentaerythritol Tetranitrate Reductase (PETNR) and the Thermostable Old Yellow Enzyme (TOYE), using different alkene substrates. TOYE showed higher productivity for the reduction of 2‐cyclohexen‐1‐one (1.20 mM h−1), 2‐methyl‐2‐cyclohexen‐1‐one (1.40 mM h−1) and 2‐methyl‐2‐pentanal (0.40 mM h−1), with enantiomeric excesses ranging from 11 % to 99 %. PETNR outperformed TOYE in terms of enantioselectivity for the reduction of 2‐methyl‐2‐pentanal (ee 59 % ± 7 % (S)). Notably, TOYE achieved promising results also in reducing ketoisophorone, a challenging substrate, with similar enantiomeric excess compared to published values using NADH.


  • Open Access

    The Effect of the Tetraalkylammonium Cation in the Electrochemical CO2 Reduction Reaction on Copper Electrode

    by Connor Deacon-Price, Louis Changeur, Cássia S. Santana, Amanda C. Garcia

    Aprotic organic solvents such as acetonitrile offer a potential solution to promote electrochemical CO2 reduction over the competing hydrogen evolution reaction. Tetraalkylammonium cations (TAA+) are widely used as supporting electrolytes in organic media due to their high solubility and conductivity. The alkyl chain length of TAA+ cations is known to influence electron transfer processes in electrochemical systems by the adsorption of TAA+, causing modifications of the double layer. In this work, we elucidate the influence of the cation chain length on the mechanism and selectivity of the CO2RR reaction under controlled dry and wet acetonitrile conditions on copper cathodes. We find that the hydrophobic hydration character of the cation, which can be tuned by the chain length, has an effect on product distribution, altering the reaction pathway. Under dry conditions, smaller cations (TEA+) preferentially promote oxalate production via dimerization of the CO2 ·- intermediate, whereas formate is favored in the presence of water via protonation reaction. Larger cations (TBA+ > TPA+ > TEA+) favor the generation of CO regardless of water content. In situ FTIR analysis showed that TBA+ cations are able to stabilize adsorbed CO more effectively than TEA+, explaining why larger cations generate a higher proportion of CO. Our findings also suggest that higher cation concentrations suppress hydrogen evolution, particularly with larger cations, highlighting the role of cation chain length size and hydrophobic hydration shell.


  • Recent Understanding of Water‐Assisted CO2 Hydrogenation to Alcohols

    by Luiz H. Vieira, Alisson H. M. da Silva, Cássia S. Santana, Elisabete M. Assaf, José M. Assaf, Janaina F. Gomes

    Alcohol production from CO2 hydrogenation is a cutting‐edge process in sustainable chemistry that holds vast promise for addressing climate change by recycling and repurposing emissions. Many strategies have been proposed to improve the process efficiency. In‐situ generated, and trace amounts of water added to the feed stream have recently proved to be determinant to promote key reaction steps, increasing alcohol selectivity and yield. Here, we discuss the main findings that led to an atomic‐level understanding of water promotional effects in CO2 hydrogenation to alcohols. H2O and the products resultant from its dissociation (OH and O) can act in different ways, stabilizing intermediates and active sites or participating in the hydrogen transfer mechanisms during the reaction. Gaining insights into the mechanisms underlying water promotion offers a cost‐effective strategy for enhancing alcohol production efficiency.


  • Noble Metals in Recent Developments of Heterogeneous Catalysts for CO2 Conversion Processes

    by Luiz H. Vieira, Letícia F. Rasteiro, Cássia S. Santana, Gabriel L. Catuzo, Alisson H. M. da Silva, José M. Assaf, Elisabete M. Assaf

    Following the advances in capture technologies, CO2 utilization associated with low‐cost renewable H2 in catalytic hydrogenation is a promising strategy for reducing the carbon footprint of industrial processes by providing valuable chemicals and fuels. However, the scalability and economic viability of these processes will depend on the development of efficient catalysts. Noble metal‐based catalysts have been extensively reported in the last few years as highly effective in promoting CO2 hydrogenation to various products. Although promising, the scarcity, high cost, and environmental impact of mining make it challenging to scale up these materials from bench to plant. Developing advanced synthesis and characterization methods is essential to control and understand active sites’ behavior during the reaction, providing high activity and durability. This review carefully summarizes the recently reported noble metal‐based heterogeneous catalysts for thermocatalytic conversion of CO2 into methane, carbon monoxide, methanol, formic acid, higher alcohols, C2+ hydrocarbons, and syngas through dry reforming of CH4, to draw the state‐of‐the‐art development in the field. Finally, we critically discuss the impact of these elements on catalyst properties, the challenges related to their implementation, and future research opportunities.


  • Fe2O3/MCM‐41 as catalysts for methyl orange degradation by Fenton‐like reactions

    by Cássia Sidney Santana, Daniela Patrícia Freire Bonfim, Ivana Helena da Cruz, Marcelo da Silva Batista, Demian Patrick Fabiano

    A large amount of contaminated industrial wastewater has aroused mounting concern by researchers and environmentalists. Dyes contained in industrial effluents are often quite persistent to biodegradation, which must be treated before being disposed of. In this context, the use of Fenton processes is a potential alternative to treat a wide range of dyes and other organic pollutants found in wastewater. Thus, several Fe2O3/MCM‐41 catalysts have been synthesized in the following molar ratio of SiO2/Fe2O3: 10, 20, 40, 100, and 200. They were characterized by N2adsorption–desorption isotherm, X‐ray fluorescence (XRF), X‐ray diffraction (XRD), UV–vis spectroscopy and H2temperature‐programmed reduction (H2‐TPR), and applied to degrade methyl orange dye (MO) via a heterogeneous Fenton reaction. Catalytic tests revealed that SiO2/Fe2O3= 10 reached the highest activity due to greater availability of active sites which generated a larger quantity of hydroxyl (•OH) and perhydroxyl (•OOH) radicals. Furthermore, 70% of color removal has been achieved after 120 min at room temperature. Moreover, the systems moderately enhanced organic matter mineralization according to chemical oxygen demand (COD) testing. There was also catalytic activity loss in consecutive reaction cycles, which is probably due to dye molecules adsorption on active sites.


  • Open Access

    Kinetic Evaluation of Dye Decolorization by Fenton Processes in the Presence of 3-Hydroxyanthranilic Acid

    by Cássia Sidney Santana, Márcio Daniel Nicodemos Ramos, Camila Cristina Vieira Velloso, André Aguiar

    The fungal metabolite 3-hydroxyanthranilic acid (3-HAA) was used as a redox mediator with the aim of increasing dye degradation by Fenton oxidative processes (Fe2+/H2O2, Fe3+/H2O2). Its Fe3+-reducing activity can enhance the generation of reactive oxygen species as HO● radicals. Initially, the influence of 3-HAA on decolorization kinetics of five dyes (methylene blue, chromotrope 2R, methyl orange, phenol red, and safranin T) was investigated using decolorization data from a previous work conducted by the present research group. Fe3+-containing reaction data were well fitted with first-order and mainly second-order kinetic models, whereas the BMG (Behnajady, Modirshahla and Ghanbary) model obtained optimal fit to Fe2+. Improvements in kinetic parameters (i.e., apparent rate constants and maximum oxidation capacity) were observed with the addition of 3-HAA. In another set of experiments, a decrease in apparent activation energy was observed due to introducing 3-HAA into reactions containing either Fe2+ or Fe3+ in order to decolorize phenol red at different temperatures. This indicates that the redox mediator decreases the energy barrier so as to allow reactions to occur. Thus, based on recent experiments and the reaction kinetics models evaluated herein, pro-oxidant properties have been observed for 3-HAA in Fenton processes.


  • Open Access

    Behavior of dihydroxybenzenes and gallic acid on the Fenton-based decolorization of dyes

    by Fernanda Barreto, Cássia Sidney Santana, André Aguiar

    Dihydroxybenzenes (DHBs) are used as mediators to increase the degradation of recalcitrant organic pollutants by Fenton reaction. DHBs regenerate Fe2+ ions, resulting in the formation of OH radicals in a more intense and continuous manner than the classical Fenton reaction. The present work investigates the behavior of different DHBs and gallic acid (a trihydroxybenzene) on the decolorization of dye solutions by Fenton systems (Fe2+/H2O2, Fe3+/H2O2). For the majority of DHBs and gallic acid, pro-oxidant properties were observed on the decolorization of methylene blue, chromotrope 2R, methyl orange, and phenol red. These properties were dependent on the hydroxyl position in the aromatic ring and were highly influenced by the structure and redox potential of the target pollutant. The dye decolorization by Fenton-like reaction (Fe3+/H2O2) in the presence of 2,5-dihydroxybenzoic acid as mediator was more efficient than classical Fenton reaction. For example, Fe3+/H2O2/2,5-dihydroxybenzoic acid system provided 60% of phenol red decolorization against 40% by Fe2+/H2O2 after 60 min of reaction. DHBs and gallic acid increased the decolorization of dyes, requiring the highest H2O2 consumption. However, H2O2 consumption occurred even when the dye solutions were not extensively decolorized, suggesting that part of the generated OH radicals reacted with either DHBs, H2O2 or other reactive species in solution.