Azadeh Abdollahnejad
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Azadeh Abdollahnejad has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Dimitrios Panagiotidis
Faculty of Forestry and Wood Sciences, Czech University of Life Sciences (CZU Prague), Kamýcká 129, 165 21 Prague, Czech Republic
16 shared publications - Peter Surový
Faculty of Forestry and Wood Sciences, Czech University of Life Sciences Prague, Kamycka 129, 165 00 Prague, Czech Republic
6 shared publications Peter Surový
Department of Forest Management, Faculty of Forestry and Wood Sciences, Czech University of Life Sciences Prague (CULS), Kamýcká 129, Prague 165 21, Czech Republic
3 shared publications- Adam Sieczka
Marshal Office of Mazowieckie Voivodeship (Mazovia), 03-719 Warszawa, Poland
2 shared publications - Andriy Dorosh
Land Management Institute of the National Academy of Agrarian Sciences of Ukraine, 03022 Kyiv, Ukraine
2 shared publications - Andrzej Perkowski
Marshal Office of Mazowieckie Voivodeship (Mazovia), 03-719 Warszawa, Poland
2 shared publications
Latest Publications
- Open Access
Profiling Land Use Planning: Legislative Structures in Five European Nations
Land use transformation, the longest-standing human-driven environmental alteration, is a pressing and complex issue that significantly impacts European landscapes and contributes to global environmental change. The urgency to act is reinforced by the European Environment Agency (EEA), which identifies industrial, commercial, and residential development—particularly near major urban centers—as key contributors to land take. As the EU sets a vision for achieving zero net land take by 2050, assessing the readiness and coherence of national legislation becomes critical. This comprehensive study employs a comparative legal analysis across five European countries—Italy, Greece, Poland, France, and Ukraine—examining their laws, strategies, and commitments related to land degradation neutrality. Using a review of national legislation and policy documents, the research identifies systemic patterns, barriers, and opportunities within current legal frameworks. The present study aims to provide valuable insights for policymakers, planners, and academic institutions, fostering a comprehensive understanding of existing gaps, implementation, and inconsistencies in national land use legislation. Among the results, it has become evident that a typical “pathway” between the examined states in terms of the legislative framework on land use–land take is probably a utopia for the time being. The legislations in force, in several cases, are labyrinthine and multifaceted, highlighting the urgent and immediate need for simplification and standardization. The need for this action is further underscored by the fact that, in most cases, land use frameworks are characterized by complementary legislation and ongoing amendments. Ultimately, the research underscores the critical need for harmonized governance and transparent, enforceable policies, particularly in regions where deregulated land use planning persists. The diversity in legislative layers and the decentralized role of the authorities further compounds the complexity, reinforcing the importance of cross-country dialogue and EU-wide coordination in advancing sustainable land use development.
Open AccessProfiling Land Use Planning: Legislative Structures in Five European Nations
Land use transformation, the longest-standing human-driven environmental alteration, is a pressing and complex issue that significantly impacts European landscapes and contributes to global environmental change. The urgency to act is reinforced by the European Environment Agency (EEA), which identifies industrial, commercial, and residential development—particularly near major urban centers—as key contributors to land take. As the EU sets a vision for achieving zero net land take by 2050, assessing the readiness and coherence of national legislation becomes critical. This comprehensive study employs a comparative legal analysis across five European countries—Italy, Greece, Poland, France, and Ukraine—examining their laws, strategies, and commitments related to land degradation neutrality. Using a review of national legislation and policy documents, the research identifies systemic patterns, barriers, and opportunities within current legal frameworks. The present study aims to provide valuable insights for policymakers, planners, and academic institutions, fostering a comprehensive understanding of existing gaps, implementation, and inconsistencies in national land use legislation. Among the results, it has become evident that a typical “pathway” between the examined states in terms of the legislative framework on land use–land take is probably a utopia for the time being. The legislations in force, in several cases, are labyrinthine and multifaceted, highlighting the urgent and immediate need for simplification and standardization. The need for this action is further underscored by the fact that, in most cases, land use frameworks are characterized by complementary legislation and ongoing amendments. Ultimately, the research underscores the critical need for harmonized governance and transparent, enforceable policies, particularly in regions where deregulated land use planning persists. The diversity in legislative layers and the decentralized role of the authorities further compounds the complexity, reinforcing the importance of cross-country dialogue and EU-wide coordination in advancing sustainable land use development.
- Open Access
- 29 April 2025
- Published by MDPI AG in Preprints.org
Profiling the Current Curriculum of Land Use Planning and Management Practices in the EU
Land use transformation, the longest-standing human-driven environmental alteration, is a pressing and complex issue that significantly impacts European landscapes. It is often described as a dimensional key to “global change”. As the European Environment Agency (EEA) reports, the significant factors influencing land take in the European Economic Area include industrial and commercial activities, alongside the expansion of residential areas, particularly in the vicinity of larger urban agglomerations. This comprehensive study explores the diverse strategies adopted by European countries, including Italy, Greece, Poland, France, and Ukraine, to address the challenge of achieving zero net land take by 2050. This involves thoroughly examining the countries' laws, strategies, and targets for neutrality in land degradation. The potential impact of this study on policymakers, land-use planners, and academic institutions is significant, as it aims to foster a comprehensive understanding of the existing gaps, practical implementation challenges, and inconsistencies in national laws. Ultimately, the research aims to yield essential insights, underscoring the crucial role of these stakeholders in sustainable land use development. Among the results, it has become evident that a typical “pathway” between the examined states in terms of legislative framework on land use–land take is probably a utopia for the time being. The legislations in force, in several cases, are labyrinthine and multifaceted, highlighting the urgent and immediate need for simplification and standardization. The need for this action is further underscored by the fact that, in most cases, land use frameworks are characterized by complementary legislation and ongoing amendments. Notably, deregulated land-use planning and development occur in certain instances within Southern Europe. To a further extent, the structure, role, and implementation of legislations rest within different levels of legislative entities, thus giving a wide range of complexity, diversity, and goals depending on who legislates each case.
- 29 April 2025
- Published by MDPI AG in Preprints.org
Open AccessProfiling the Current Curriculum of Land Use Planning and Management Practices in the EU
Land use transformation, the longest-standing human-driven environmental alteration, is a pressing and complex issue that significantly impacts European landscapes. It is often described as a dimensional key to “global change”. As the European Environment Agency (EEA) reports, the significant factors influencing land take in the European Economic Area include industrial and commercial activities, alongside the expansion of residential areas, particularly in the vicinity of larger urban agglomerations. This comprehensive study explores the diverse strategies adopted by European countries, including Italy, Greece, Poland, France, and Ukraine, to address the challenge of achieving zero net land take by 2050. This involves thoroughly examining the countries' laws, strategies, and targets for neutrality in land degradation. The potential impact of this study on policymakers, land-use planners, and academic institutions is significant, as it aims to foster a comprehensive understanding of the existing gaps, practical implementation challenges, and inconsistencies in national laws. Ultimately, the research aims to yield essential insights, underscoring the crucial role of these stakeholders in sustainable land use development. Among the results, it has become evident that a typical “pathway” between the examined states in terms of legislative framework on land use–land take is probably a utopia for the time being. The legislations in force, in several cases, are labyrinthine and multifaceted, highlighting the urgent and immediate need for simplification and standardization. The need for this action is further underscored by the fact that, in most cases, land use frameworks are characterized by complementary legislation and ongoing amendments. Notably, deregulated land-use planning and development occur in certain instances within Southern Europe. To a further extent, the structure, role, and implementation of legislations rest within different levels of legislative entities, thus giving a wide range of complexity, diversity, and goals depending on who legislates each case.
- Open Access
Socio-Economic Benefits of Colophospermum mopane in a Changing Climate in Northern Namibia
Millions of local communities in southern Africa depend on forest ecosystems and the goods and services they provide for their livelihoods. This paper aims to assess the socio-economic benefits of forest goods and services in a changing climate by focusing on the forest products of Colophospermum mopane (C. mopane) in the Kunene and Omusati regions in northern Namibia. We used C. mopane product data from 2011 to 2021. Our analyses showed that local communities harvested five main products from C. mopane, namely firewood, poles, droppers, rafters, and roots. Firewood and poles were the primary C. mopane products harvested by local communities, mainly for subsistence use. Our results suggest that C. mopane potentially continues to the provision of goods and services for the livelihood of local communities, despite the changing climate in northern Namibia. We propose future studies in predictive analysis focus on extreme weather events, such as forest fires, droughts, floods, and other climate-related hazards that affect goods and services provided by forest ecosystems in the northern regions and the entire country.
Open AccessSocio-Economic Benefits of Colophospermum mopane in a Changing Climate in Northern Namibia
Millions of local communities in southern Africa depend on forest ecosystems and the goods and services they provide for their livelihoods. This paper aims to assess the socio-economic benefits of forest goods and services in a changing climate by focusing on the forest products of Colophospermum mopane (C. mopane) in the Kunene and Omusati regions in northern Namibia. We used C. mopane product data from 2011 to 2021. Our analyses showed that local communities harvested five main products from C. mopane, namely firewood, poles, droppers, rafters, and roots. Firewood and poles were the primary C. mopane products harvested by local communities, mainly for subsistence use. Our results suggest that C. mopane potentially continues to the provision of goods and services for the livelihood of local communities, despite the changing climate in northern Namibia. We propose future studies in predictive analysis focus on extreme weather events, such as forest fires, droughts, floods, and other climate-related hazards that affect goods and services provided by forest ecosystems in the northern regions and the entire country.
- Open Access
Effects, Monitoring and Management of Forest Roads Using Remote Sensing and GIS in Angolan Miombo Woodlands
Angola’s forests are abundant and highly productive with enormous potential to support local needs and exportation. The forests are well distributed across the country, but the existing road network is generally poor and, in some cases, inappropriate. Based on our previous work examining deforestation patterns and the modeling of primary tree attributes of vegetation types, we proposed forest management zones (MZ) for future planning in Huambo province in Angola. Herein, that same framework is applied for the detection of the existing road network in Huambo and the proposal of alternative routes inside the MZ. We used analytic hierarchy process (AHP) and geographic information systems (GIS) to optimize connectivity among the existing forest plantations and their distance to the closest major cities within the province. We developed road suitability maps based on AHP and GIS to ensure safer driving conditions and contribute to the forest planner’s access to the current plantations. According to the suitability map created, 59.51% of the total area is suitable for road development and is counted in classes 4 and 5 in automatic classification. Parameters such as geology, slope, distance from roads to the railway, soil types, elevation, flow accumulation, and aspect were used. We provide a completed assessment of the state of existing roads and evaluate the safety of the observed road sections based on the AHP method. The calculated weights of the factors were all consistent with the model used (consistency ratio was 0.09 < 0.1). Finally, we proposed the best alternative routes to the existing cities, MZ in miombo woodlands, and forest plantations inside the province. Our findings indicated that flow accumulation, soil type, and geology were the most significant factors impacting road construction. Overall, our framework is an important starting point for further research activities towards developing a spatial decision support system (SDSS) for planning road networks in Angola.
Open AccessEffects, Monitoring and Management of Forest Roads Using Remote Sensing and GIS in Angolan Miombo Woodlands
Angola’s forests are abundant and highly productive with enormous potential to support local needs and exportation. The forests are well distributed across the country, but the existing road network is generally poor and, in some cases, inappropriate. Based on our previous work examining deforestation patterns and the modeling of primary tree attributes of vegetation types, we proposed forest management zones (MZ) for future planning in Huambo province in Angola. Herein, that same framework is applied for the detection of the existing road network in Huambo and the proposal of alternative routes inside the MZ. We used analytic hierarchy process (AHP) and geographic information systems (GIS) to optimize connectivity among the existing forest plantations and their distance to the closest major cities within the province. We developed road suitability maps based on AHP and GIS to ensure safer driving conditions and contribute to the forest planner’s access to the current plantations. According to the suitability map created, 59.51% of the total area is suitable for road development and is counted in classes 4 and 5 in automatic classification. Parameters such as geology, slope, distance from roads to the railway, soil types, elevation, flow accumulation, and aspect were used. We provide a completed assessment of the state of existing roads and evaluate the safety of the observed road sections based on the AHP method. The calculated weights of the factors were all consistent with the model used (consistency ratio was 0.09 < 0.1). Finally, we proposed the best alternative routes to the existing cities, MZ in miombo woodlands, and forest plantations inside the province. Our findings indicated that flow accumulation, soil type, and geology were the most significant factors impacting road construction. Overall, our framework is an important starting point for further research activities towards developing a spatial decision support system (SDSS) for planning road networks in Angola.
- Open Access
- 6 December 2021
- Published by MDPI AG in Remote Sensing
- Vol. 13 (23) , 4953
Investigating the Correlation between Multisource Remote Sensing Data for Predicting Potential Spread of Ips typographus L. Spots in Healthy Trees
In the last decade, thousands of hectares of forests have been lost in the Czech Republic, primarily related to European spruce bark beetle (Ips typographus L.), while more than 50% of the remaining Czech forests are in great danger, thus posing severe threats to the resilience, stability, and functionality of those forests. The role of remote sensing in monitoring dynamic structural changes caused by pests is essential to understand and sustainably manage these forests. This study hypothesized a possible correlation between tree health status and multisource time series remote sensing data using different processed layers to predict the potential spread of attack by European spruce bark beetle in healthy trees. For this purpose, we used WorldView-2, Pléiades 1B, and SPOT-6 images for the period of April to September from 2018 to 2020; unmanned aerial vehicle (UAV) imagery data were also collected for use as a reference data source. Our results revealed that spectral resolution is crucial for the early detection of infestation. We observed a significant difference in the reflectance of different health statuses, which can lead to the early detection of infestation as much as two years in advance. More specifically, several bands from two different satellites in 2018 perfectly predicted the health status classes from 2020. This method could be used to evaluate health status classes in the early stage of infestation over large forested areas, which would provide a better understanding of the current situation and information for decision making and planning for the future.
- 6 December 2021
- Published by MDPI AG in Remote Sensing
- Vol. 13 (23) , 4953
Open AccessInvestigating the Correlation between Multisource Remote Sensing Data for Predicting Potential Spread of Ips typographus L. Spots in Healthy Trees
In the last decade, thousands of hectares of forests have been lost in the Czech Republic, primarily related to European spruce bark beetle (Ips typographus L.), while more than 50% of the remaining Czech forests are in great danger, thus posing severe threats to the resilience, stability, and functionality of those forests. The role of remote sensing in monitoring dynamic structural changes caused by pests is essential to understand and sustainably manage these forests. This study hypothesized a possible correlation between tree health status and multisource time series remote sensing data using different processed layers to predict the potential spread of attack by European spruce bark beetle in healthy trees. For this purpose, we used WorldView-2, Pléiades 1B, and SPOT-6 images for the period of April to September from 2018 to 2020; unmanned aerial vehicle (UAV) imagery data were also collected for use as a reference data source. Our results revealed that spectral resolution is crucial for the early detection of infestation. We observed a significant difference in the reflectance of different health statuses, which can lead to the early detection of infestation as much as two years in advance. More specifically, several bands from two different satellites in 2018 perfectly predicted the health status classes from 2020. This method could be used to evaluate health status classes in the early stage of infestation over large forested areas, which would provide a better understanding of the current situation and information for decision making and planning for the future.
- Open Access
- 10 September 2021
- Published by MDPI AG in Remote Sensing
- Vol. 13 (18) , 3610
Reliable Estimates of Merchantable Timber Volume from Terrestrial Laser Scanning
Simple and accurate determination of merchantable tree height is needed for accurate estimations of merchantable volume. Conventional field methods of forest inventory can lead to biased estimates of tree height and diameter, especially in complex forest structures. Terrestrial laser scanner (TLS) data can be used to determine merchantable height and diameter at different heights with high accuracy and detail. This study focuses on the use of the random sampling consensus method (RANSAC) for generating the length and diameter of logs to estimate merchantable volume at the tree level using Huber’s formula. For this study, we used two plots; plot A contained deciduous trees and plot B consisted of conifers. Our results demonstrated that the TLS-based outputs for stem modelling using the RANSAC method performed very well with low bias (0.02 for deciduous and 0.01 for conifers) and a high degree of accuracy (97.73% for deciduous and 96.14% for conifers). We also found a high correlation between the proposed method and log length (−0.814 for plot A and −0.698 for plot B), which is an important finding because this information can be used to determine the optimum log properties required for analyzing stem curvature changes at different heights. Furthermore, the results of this study provide insight into the applicability and ergonomics during data collection from forest inventories solely from terrestrial laser scanning, thus reducing the need for field reference data.
- 10 September 2021
- Published by MDPI AG in Remote Sensing
- Vol. 13 (18) , 3610
Open AccessReliable Estimates of Merchantable Timber Volume from Terrestrial Laser Scanning
Simple and accurate determination of merchantable tree height is needed for accurate estimations of merchantable volume. Conventional field methods of forest inventory can lead to biased estimates of tree height and diameter, especially in complex forest structures. Terrestrial laser scanner (TLS) data can be used to determine merchantable height and diameter at different heights with high accuracy and detail. This study focuses on the use of the random sampling consensus method (RANSAC) for generating the length and diameter of logs to estimate merchantable volume at the tree level using Huber’s formula. For this study, we used two plots; plot A contained deciduous trees and plot B consisted of conifers. Our results demonstrated that the TLS-based outputs for stem modelling using the RANSAC method performed very well with low bias (0.02 for deciduous and 0.01 for conifers) and a high degree of accuracy (97.73% for deciduous and 96.14% for conifers). We also found a high correlation between the proposed method and log length (−0.814 for plot A and −0.698 for plot B), which is an important finding because this information can be used to determine the optimum log properties required for analyzing stem curvature changes at different heights. Furthermore, the results of this study provide insight into the applicability and ergonomics during data collection from forest inventories solely from terrestrial laser scanning, thus reducing the need for field reference data.
- Open Access
Accuracy Assessment of Total Stem Volume Using Close-Range Sensing: Advances in Precision Forestry
Accurate collection of dendrometric information is essential for improving decision confidence and supporting potential advances in forest management planning (FMP). Total stem volume is an important forest inventory parameter that requires high accuracy. Terrestrial laser scanning (TLS) has emerged as one of the most promising tools for automatically measuring total stem height and diameter at breast height (DBH) with very high detail. This study compares the accuracy of different methods for extracting the total stem height and DBH to estimate total stem volume from TLS data. Our results show that estimates of stem volume using the random sample consensus (RANSAC) and convex hull and HTSP methods are more accurate (bias = 0.004 for RANSAC and bias = 0.009 for convex hull and HTSP) than those using the circle fitting method (bias = 0.046). Furthermore, the RANSAC method had the best performance with the lowest bias and the highest percentage of accuracy (78.89%). The results of this study provide insight into the performance and accuracy of the tested methods for tree-level stem volume estimation, and allow for the further development of improved methods for point-cloud-based data collection with the goal of supporting potential advances in precision forestry.
Open AccessAccuracy Assessment of Total Stem Volume Using Close-Range Sensing: Advances in Precision Forestry
Accurate collection of dendrometric information is essential for improving decision confidence and supporting potential advances in forest management planning (FMP). Total stem volume is an important forest inventory parameter that requires high accuracy. Terrestrial laser scanning (TLS) has emerged as one of the most promising tools for automatically measuring total stem height and diameter at breast height (DBH) with very high detail. This study compares the accuracy of different methods for extracting the total stem height and DBH to estimate total stem volume from TLS data. Our results show that estimates of stem volume using the random sample consensus (RANSAC) and convex hull and HTSP methods are more accurate (bias = 0.004 for RANSAC and bias = 0.009 for convex hull and HTSP) than those using the circle fitting method (bias = 0.046). Furthermore, the RANSAC method had the best performance with the lowest bias and the highest percentage of accuracy (78.89%). The results of this study provide insight into the performance and accuracy of the tested methods for tree-level stem volume estimation, and allow for the further development of improved methods for point-cloud-based data collection with the goal of supporting potential advances in precision forestry.
- Open Access
Assessment of Stem Volume on Plots Using Terrestrial Laser Scanner: A Precision Forestry Application
Timber volume is an important asset, not only as an ecological component, but also as a key source of present and future revenues, which requires precise estimates. We used the Trimble TX8 survey-grade terrestrial laser scanner (TLS) to create a detailed 3D point cloud for extracting total tree height and diameter at breast height (1.3 m; DBH). We compared two different methods to accurately estimate total tree heights: the first method was based on a modified version of the local maxima algorithm for treetop detection, “HTTD”, and for the second method we used the centers of stem cross-sections at stump height (30 cm), “HTSP”. DBH was estimated by a computationally robust algebraic circle-fitting algorithm through hierarchical cluster analysis (HCA). This study aimed to assess the accuracy of these descriptors for evaluating total stem volume by comparing the results with the reference tree measurements. The difference between the estimated total stem volume from HTTD and measured stems was 2.732 m3 for European oak and 2.971 m3 for Norway spruce; differences between the estimated volume from HTSP and measured stems was 1.228 m3 and 2.006 m3 for European oak and Norway spruce, respectively. The coefficient of determination indicated a strong relationship between the measured and estimated total stem volumes from both height estimation methods with an R2 = 0.89 for HTTD and R2 = 0.87 for HTSP for European oak, and R2 = 0.98 for both HTTD and HTSP for Norway spruce. Our study has demonstrated the feasibility of finer-resolution remote sensing data for semi-automatic stem volumetric modeling of small-scale studies with high accuracy as a potential advancement in precision forestry.
Open AccessAssessment of Stem Volume on Plots Using Terrestrial Laser Scanner: A Precision Forestry Application
Timber volume is an important asset, not only as an ecological component, but also as a key source of present and future revenues, which requires precise estimates. We used the Trimble TX8 survey-grade terrestrial laser scanner (TLS) to create a detailed 3D point cloud for extracting total tree height and diameter at breast height (1.3 m; DBH). We compared two different methods to accurately estimate total tree heights: the first method was based on a modified version of the local maxima algorithm for treetop detection, “HTTD”, and for the second method we used the centers of stem cross-sections at stump height (30 cm), “HTSP”. DBH was estimated by a computationally robust algebraic circle-fitting algorithm through hierarchical cluster analysis (HCA). This study aimed to assess the accuracy of these descriptors for evaluating total stem volume by comparing the results with the reference tree measurements. The difference between the estimated total stem volume from HTTD and measured stems was 2.732 m3 for European oak and 2.971 m3 for Norway spruce; differences between the estimated volume from HTSP and measured stems was 1.228 m3 and 2.006 m3 for European oak and Norway spruce, respectively. The coefficient of determination indicated a strong relationship between the measured and estimated total stem volumes from both height estimation methods with an R2 = 0.89 for HTTD and R2 = 0.87 for HTSP for European oak, and R2 = 0.98 for both HTTD and HTSP for Norway spruce. Our study has demonstrated the feasibility of finer-resolution remote sensing data for semi-automatic stem volumetric modeling of small-scale studies with high accuracy as a potential advancement in precision forestry.
- Open Access
- 12 November 2020
- Published by MDPI AG in Remote Sensing
- Vol. 12 (22) , 3722
Tree Species Classification and Health Status Assessment for a Mixed Broadleaf-Conifer Forest with UAS Multispectral Imaging
Automatic discrimination of tree species and identification of physiological stress imposed on forest trees by biotic factors from unmanned aerial systems (UAS) offers substantial advantages in forest management practices. In this study, we aimed to develop a novel workflow for facilitating tree species classification and the detection of healthy, unhealthy, and dead trees caused by bark beetle infestation using ultra-high resolution 5-band UAS bi-temporal aerial imagery in the Czech Republic. The study is divided into two steps. We initially classified the tree type, either as broadleaf or conifer, and we then classified trees according to the tree type and health status, and subgroups were created to further classify trees (detailed classification). Photogrammetric processed datasets achieved by the use of structure-from-motion (SfM) imaging technique, where resulting digital terrain models (DTMs), digital surface models (DSMs), and orthophotos with a resolution of 0.05 m were utilized as input for canopy spectral analysis, as well as texture analysis (TA). For the spectral analysis, nine vegetation indices (VIs) were applied to evaluate the amount of vegetation cover change of canopy surface between the two seasons, spring and summer of 2019. Moreover, 13 TA variables, including Mean, Variance, Entropy, Contrast, Heterogeneity, Homogeneity, Angular Second Moment, Correlation, Gray-level Difference Vector (GLDV) Angular Second Moment, GLDV Entropy, GLDV Mean, GLDV Contrast, and Inverse Difference, were estimated for the extraction of canopy surface texture. Further, we used the support vector machine (SVM) algorithm to conduct a detailed classification of tree species and health status. Our results highlighted the efficiency of the proposed method for tree species classification with an overall accuracy (OA) of 81.18% (Kappa: 0.70) and health status assessment with an OA of 84.71% (Kappa: 0.66). While SVM proved to be a good classifier, the results also showed that a combination of VI and TA layers increased the OA by 4.24%, providing a new dimension of information derived from UAS platforms. These methods could be used to quickly evaluate large areas that have been impacted by biological disturbance agents for mapping and detection, tree inventory, and evaluating habitat conditions at relatively low costs.
- 12 November 2020
- Published by MDPI AG in Remote Sensing
- Vol. 12 (22) , 3722
Open AccessTree Species Classification and Health Status Assessment for a Mixed Broadleaf-Conifer Forest with UAS Multispectral Imaging
Automatic discrimination of tree species and identification of physiological stress imposed on forest trees by biotic factors from unmanned aerial systems (UAS) offers substantial advantages in forest management practices. In this study, we aimed to develop a novel workflow for facilitating tree species classification and the detection of healthy, unhealthy, and dead trees caused by bark beetle infestation using ultra-high resolution 5-band UAS bi-temporal aerial imagery in the Czech Republic. The study is divided into two steps. We initially classified the tree type, either as broadleaf or conifer, and we then classified trees according to the tree type and health status, and subgroups were created to further classify trees (detailed classification). Photogrammetric processed datasets achieved by the use of structure-from-motion (SfM) imaging technique, where resulting digital terrain models (DTMs), digital surface models (DSMs), and orthophotos with a resolution of 0.05 m were utilized as input for canopy spectral analysis, as well as texture analysis (TA). For the spectral analysis, nine vegetation indices (VIs) were applied to evaluate the amount of vegetation cover change of canopy surface between the two seasons, spring and summer of 2019. Moreover, 13 TA variables, including Mean, Variance, Entropy, Contrast, Heterogeneity, Homogeneity, Angular Second Moment, Correlation, Gray-level Difference Vector (GLDV) Angular Second Moment, GLDV Entropy, GLDV Mean, GLDV Contrast, and Inverse Difference, were estimated for the extraction of canopy surface texture. Further, we used the support vector machine (SVM) algorithm to conduct a detailed classification of tree species and health status. Our results highlighted the efficiency of the proposed method for tree species classification with an overall accuracy (OA) of 81.18% (Kappa: 0.70) and health status assessment with an OA of 84.71% (Kappa: 0.66). While SVM proved to be a good classifier, the results also showed that a combination of VI and TA layers increased the OA by 4.24%, providing a new dimension of information derived from UAS platforms. These methods could be used to quickly evaluate large areas that have been impacted by biological disturbance agents for mapping and detection, tree inventory, and evaluating habitat conditions at relatively low costs.
- Open Access
- 29 October 2019
- Published by MDPI AG in Remote Sensing
- Vol. 11 (21) , 2539
An Integrated GIS and Remote Sensing Approach for Monitoring Harvested Areas from Very High-Resolution, Low-Cost Satellite Images
Advanced monitoring and mapping of forest areas using the latest technological advances in satellite imagery is an alternative solution for sustainable forest management compared to conventional ground measurements. Remote sensing products have been a key source of information and cost-effective options for monitoring changes in harvested areas. Despite recent advances in satellite technology with a broad variety of spectral and temporal resolutions, monitoring the areal extent of harvested forest areas in managed forests is still a challenge, primarily due to the highly dynamic spatiotemporal patterns of logging activities. Our goal was to introduce a plot-based method for monitoring harvested forest areas from very high-resolution (VHR), low-cost satellite images. Our method encompassed two data categories, which included vegetation indices (VIs) and texture analysis (TA). Each group of data was used to model the amount of harvested volume both independently and in combination. Our results indicated that the composition of all spectral bands can improve the accuracy of all models of average volume by 23.52 RMSE reduction and total volume by 33.57 RMSE reduction. This method demonstrated that monitoring and extrapolation of the calculated relation and results from smaller forested areas could be applied as an automatic remote-based supervised monitoring method over larger forest areas.
- 29 October 2019
- Published by MDPI AG in Remote Sensing
- Vol. 11 (21) , 2539
Open AccessAn Integrated GIS and Remote Sensing Approach for Monitoring Harvested Areas from Very High-Resolution, Low-Cost Satellite Images
Advanced monitoring and mapping of forest areas using the latest technological advances in satellite imagery is an alternative solution for sustainable forest management compared to conventional ground measurements. Remote sensing products have been a key source of information and cost-effective options for monitoring changes in harvested areas. Despite recent advances in satellite technology with a broad variety of spectral and temporal resolutions, monitoring the areal extent of harvested forest areas in managed forests is still a challenge, primarily due to the highly dynamic spatiotemporal patterns of logging activities. Our goal was to introduce a plot-based method for monitoring harvested forest areas from very high-resolution (VHR), low-cost satellite images. Our method encompassed two data categories, which included vegetation indices (VIs) and texture analysis (TA). Each group of data was used to model the amount of harvested volume both independently and in combination. Our results indicated that the composition of all spectral bands can improve the accuracy of all models of average volume by 23.52 RMSE reduction and total volume by 33.57 RMSE reduction. This method demonstrated that monitoring and extrapolation of the calculated relation and results from smaller forested areas could be applied as an automatic remote-based supervised monitoring method over larger forest areas.