LMLukas Mai

Lukas Mai

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Lukas Mai has a total of 121 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Near Room-Temperature Atomic Layer Deposition of Magnesium Oxide Using Bis-3-(N,N-dimethylamino)propyl Magnesium(II) and Water

    by Florian Preischel, Karl Rönnby, Lukas Mai, David Zanders, Detlef Rogalla, Bert Mallick, Michael Nolan, Anjana Devi

    Magnesium(II) oxide (MgO) is a versatile material that is appealing for a wide range of applications including electronics and biocompatible coatings, as pharmaceutics, and gas barrier layers (GBLs). The growth of MgO films at low temperatures is required for these applications which can be enabled by atomic layer deposition (ALD). However, the chemistry of ALD precursors reported to date for MgO is limited and there are no suitable chemistries for low temperature deposition on sensitive substrates. In this work, we describe the ALD of MgO thin films close to room temperature which was triggered by the use of a new nonpyrophoric Mg precursor that possesses all the prerequisites needed for low temperature ALD. The highly volatile bis-3-(N,N-dimethylamino)propyl magnesium(II) [Mg(DMP)2] precursor is reactive toward water. The unique chemistry of the DMP ligand facilitates the ALD process in a broad temperature range (30-260 °C) with high growth per cycle (GPC) values (2.40 Å at 40 °C and 1.91 Å at 120 °C) on Si substrates and is supported by computational studies. The as deposited films were characterized using complementary tools to investigate the composition, structure and surface topology. Furthermore, we demonstrate the growth of MgO on poly(ethylene terephthalate) (PET) foils that can be exploited for implementation in temperature sensitive flexible devices by low temperature ALD. This work highlights the key role of the DMP ligand in developing a new Mg precursor promoting low temperature ALD of MgO thin films, opening the field of flexible electronics and new applications beyond semiconductor devices.


  • Open Access

    CVD Grown Tungsten Oxide for Low Temperature Hydrogen Sensing: Tuning Surface Characteristics via Materials Processing for Sensing Applications

    by Martin Wilken, Engin Ciftyürek, Stefan Cwik, Lukas Mai, Bert Mallick, Detlef Rogalla, Klaus Schierbaum, Anjana Devi

    The intrinsic properties of semiconducting oxides having nanostructured morphology are highly appealing for gas sensing. In this study, the fabrication of nanostructured WO3 thin films with promising surface characteristics for hydrogen (H2) gas sensing applications is accomplished. This is enabled by developing a chemical vapor deposition (CVD) process employing a new and volatile tungsten precursor bis(diisopropylamido)‐bis(tert‐butylimido)‐tungsten(VI), [W(NtBu)2(NiPr2)2]. The as‐grown nanostructured WO3 layers are thoroughly analyzed. Particular attention is paid to stoichiometry, surface characteristics, and morphology, all of which strongly influence the gas‐sensing potential of WO3. Synchrotron‐based ultraviolet photoelectron spectroscopy (UPS), X‐ray photoelectron spectroscopy (XPS), X‐ray photoelectron emission microscopy (XPEEM), low‐energy electron microscopy (LEEM) and 4‐point van der Pauw (vdP) technique made it possible to analyze the surface chemistry and structural uniformity with a spatially resolved insight into the chemical, electronic and electrical properties. The WO3 layer is employed as a hydrogen (H2) sensor within interdigitated mini‐mobile sensor architecture capable of working using a standard computer's 5 V 1‐wirebus connection. The sensor shows remarkable sensitivity toward H2. The high, robust, and repeatable sensor response (S) is attributed to the homogenous distribution of the W5+ oxidation state and associated oxygen vacancies, as shown by synchrotron‐based UPS, XPS, and XPEEM analysis.


  • Open Access

    Low-temperature ALD/MLD growth of alucone and zincone thin films from non-pyrophoric precursors

    by Anish Philip, Lukas Mai, Ramin Ghiyasi, Anjana Devi, Maarit Karppinen

    The combined atomic/molecular layer deposition (ALD/MLD) technique is emerging as a state-of-the-art synthesis route for new metal–organic thin-film materials with a multitude of properties by combining those of the inorganic and the organic material. A major part of the studies so far reported have focused on aluminum or zinc alkyls, so-called alucone and zincone films, typically grown from trimethyl aluminum (TMA) or diethyl zinc (DEZ) as the metal-bearing precursor, and a simple aliphatic bi-functional alcohol molecule such as ethylene glycol (EG) as the organic precursor. However, these common precursors possess certain disadvantages: both TMA and DEZ are pyrophoric, DEZ being additionally thermally unstable, while EG has a strong tendency for various unideal reaction modes. Here we report novel ALD/MLD processes for alucone and zincone films based on non-pyrophoric bis-diisopropylamido-[3-(N,N-dimethylamino)propyl] aluminum(III) [Al(NiPr2)2(DMP)] and bis-3-(N,N-dimethylamino)propyl zinc(II) [Zn(DMP)2] precursors in combination with hydroquinone (HQ) as the organic precursor. We demonstrate that the [Al(NiPr2)2(DMP)] + HQ and [Zn(DMP)2] + HQ ALD/MLD processes work even at record low deposition temperatures (140 °C and 60 °C, respectively) yielding high-quality and relatively stable Al-HQ and Zn-HQ thin films with appreciably high growth rates (2.8 Å / cycle and 3.2 Å / cycle, respectively). Moreover, these ALD/MLD processes are compatible with the corresponding ALD processes, i.e. [Al(NiPr2)2(DMP)] + H2O and [Zn(DMP)2] + H2O, for the Al2O3 and ZnO films, thus opening up new horizons for the fabrication of novel metal–oxide : organic superlattice structures for e.g. flexible gas-barrier coatings or wearable thermoelectrics.


  • Molecular Permeation in Freestanding Bilayer Silica

    by Daniil Naberezhnyi, Lukas Mai, Nassar Doudin, Inga Ennen, Andreas Hütten, Eric I. Altman, Anjana Devi, Petr Dementyev

    Graphene and other single-layer structures are pursued as high-flux separation membranes, although imparting porosity endangers their crystalline integrity. In contrast, bilayer silica composed of corner-sharing (SiO4) units is foreseen to be permeable for small molecules due to its intrinsic lattice openings. This study sheds light on the mass transport properties of freestanding 2D SiO2 upon using atomic layer deposition (ALD) to grow large-area films on Au/mica substrates followed by transfer onto Si3N4 windows. Permeation experiments with gaseous and vaporous substances reveal the suspended material to be porous, but the membrane selectivity appears to diverge from the size exclusion principle. Whereas the passage of inert gas molecules is hindered with a permeance below 10–7 mol·s–1·m–2·Pa–1, condensable species like water are found to cross vitreous bilayer silica a thousand times faster in accordance with their superficial affinity. This work paves the way for bilayer oxides to be addressed as inherent 2D membranes.


  • Influence of different ester side groups in polymers on the vapor phase infiltration with trimethyl aluminum

    by Lukas Mai, Dina Maniar, Frederik Zysk, Judith Schöbel, Thomas D. Kühne, Katja Loos, Anjana Devi

    The vapor phase infiltration (VPI) process of trimethyl aluminum (TMA) into poly(4-acetoxystyrene) (POAcSt), poly(nonyl methacrylate) (PNMA) and poly(tert-butyl methacrylate) (PtBMA) is reported. Depth-profiling X-ray photoelectron spectroscopy (XPS) measurements are used for the first time for VPI based hybrid materials to determine the aluminum content over the polymer film thickness. An understanding of the reaction mechanism on the interaction of TMA infiltrating into the different polymers was obtained through infrared (IR) spectroscopy supported by density functional theory (DFT) studies. It is shown that the loading with aluminum is highly dependent on the respective ester side group of the used polymer, which is observed to be the reactive site for TMA during the infiltration. IR spectroscopy hints that the infiltration is incomplete for POAcSt and PNMA, as indicated by the characteristic vibration bands of the aluminum coordination to the carbonyl groups within the polymers. In this context, two different reaction pathways are discussed. One deals with the formation of an acetal, the other is characterized by the release of a leaving group. Both were found to be in direct concurrence dependent on the polymer side group as revealed by DFT calculations of the IR spectra, as well as the reaction energies of two possible reaction paths. From this study, one can infer that the degree of infiltration in a VPI process strongly depends on the polymer side groups, which facilitates the choice of the polymer for targeted applications.


  • Cobalt Metal ALD: Understanding the Mechanism and Role of Zinc Alkyl Precursors as Reductants for Low-Resistivity Co Thin Films

    by David Zanders, Ji Liu, Jorit Obenlüneschloß, Claudia Bock, Detlef Rogalla, Lukas Mai, Michael Nolan, Seán T. Barry, Anjana Devi


  • Open Access

    Cobalt Metal ALD: Understanding the Mechanism and Role of Zink Alkyl Precursors as Reductants for Low Resistivity Co Thin Films

    by David Zanders, Ji Liu, Jorit Obenlüneschloß, Claudia Bock, Detlef Rogalla, Lukas Mai, Michael Nolan, Sean Barry, Anjana Devi

    In this work, we report a new and promising approach towards the atomic layer deposition (ALD) of metallic Co thin films. Utilizing the simple and known CoCl2(TMEDA) (TMEDA = N,N,N’,N’-tetramethylethylenediamine) precursor in combination with the intramolecularly stabilized Zn aminoalkyl compound Zn(DMP)2 (DMP = dimethylaminopropyl) as auxiliary reducing agent, a thermal ALD process is developed that enables the deposition of Zn free Co thin films. ALD studies demonstrate the saturation behavior of both precursors, linearity in dependency of the applied number of cycles as well as investigations of the temperature dependency of film growth in a regime of 140 - 215 °C. While the process optimization is carried out on Si with native oxide, additional growth studies are conducted on Au and Pt substrates. This study is complemented by initial reactivity and suitability tests of several potential Zn alkyl reducing agents. For the CoCl2(TMEDA) - Zn(DMP)2 combination, these findings allow to propose a series of elemental reaction steps hypothetically leading to pure Co film formation in the ALD process whose feasibility are probed by a set of DFT calculations. The DFT results show that for reactions of the precursors in the gas phase and on Co(111) substrate surfaces, a pathway involving C-C coupling and diamine formation through reductive elimination of an intermediate Co(II) alkyl species is preferred. Co thin films with an average thickness of 10 - 25 nm obtained from the process are subjected to thorough analysis comprising AFM, SEM, RBS/NRA as well as depth profiling XPS. Resistivity measurements for ~ 22 nm thick films grown on a defined SiO2 insulator layer yield highly promising values in a range of 15 - 20 μΩ cm without any after treatment.

  • Open Access

    Rational Development of Guanidinate and Amidinate Based Cerium and Ytterbium Complexes as Atomic Layer Deposition Precursors: Synthesis, Modeling, and Application

    by Parmish Kaur, Lukas Mai, Arbresha Muriqi, David Zanders, Ramin Ghiyasi, Muhammad Safdar, Nils Boysen, Manuela Winter, Michael Nolan, Maarit Karppinen, et al.

    Owing to the limited availability of suitable precursors for vapor phase deposition of rare‐earth containing thin‐film materials, new or improved precursors are sought after. In this study, we explored new precursors for atomic layer deposition (ALD) of cerium (Ce) and ytterbium (Yb) containing thin films. A series of homoleptic tris‐guanidinate and tris‐amidinate complexes of cerium (Ce) and ytterbium (Yb) were synthesized and thoroughly characterized. The C‐substituents on the N‐C‐N backbone (Me, NMe2, NEt2, where Me=methyl, Et=ethyl) and the N‐substituents from symmetrical iso‐propyl (iPr) to asymmetrical tertiary‐butyl (tBu) and Et were systematically varied to study the influence of the substituents on the physicochemical properties of the resulting compounds. Single crystal structures of [Ce(dpdmg)3] 1 and [Yb(dpdmg)3] 6 (dpdmg=N,N'‐diisopropyl‐2‐dimethylamido‐guanidinate) highlight a monomeric nature in the solid‐state with a distorted trigonal prismatic geometry. The thermogravimetric analysis shows that the complexes are volatile and emphasize that increasing asymmetry in the complexes lowers their melting points while reducing their thermal stability. Density functional theory (DFT) was used to study the reactivity of amidinates and guanidinates of Ce and Yb complexes towards oxygen (O2) and water (H2O). Signified by the DFT calculations, the guanidinates show an increased reactivity toward water compared to the amidinate complexes. Furthermore, the Ce complexes are more reactive compared to the Yb complexes, indicating even a reactivity towards oxygen potentially exploitable for ALD purposes. As a representative precursor, the highly reactive [Ce(dpdmg)3] 1 was used for proof‐of‐principle ALD depositions of CeO2 thin films using water as co‐reactant. The self‐limited ALD growth process could be confirmed at 160 °C with polycrystalline cubic CeO2 films formed on Si(100) substrates. This study confirms that moving towards nitrogen‐coordinated rare‐earth complexes bearing the guanidinate and amidinate ligands can indeed be very appealing in terms of new precursors for ALD of rare earth based materials.


  • Open Access

    Cover Feature: Rational Development of Guanidinate and Amidinate Based Cerium and Ytterbium Complexes as Atomic Layer Deposition Precursors: Synthesis, Modeling, and Application (Chem. Eur. J. 15/2021)

    by Parmish Kaur, Lukas Mai, Arbresha Muriqi, David Zanders, Ramin Ghiyasi, Muhammad Safdar, Nils Boysen, Manuela Winter, Michael Nolan, Maarit Karppinen, et al.


  • Open Access

    Zinc Oxide: From Precursor Chemistry to Gas Sensors: Plasma‐Enhanced Atomic Layer Deposition Process Engineering for Zinc Oxide Layers from a Nonpyrophoric Zinc Precursor for Gas Barrier and Sensor Applications (Small 22/2020)

    by Lukas Mai, Felix Mitschker, Claudia Bock, Alessia Niesen, Engin Ciftyurek, Detlef Rogalla, Johannes Mickler, Matthias Erig, Zheshen Li, Peter Awakowicz, et al.