Ali Al-Bemani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Ali Al-Bemani has a total of 102 co-authors. Here are the top co-authors by number of shared publications:
- Yahya Al-Wahaibi
Petroleum and chemical engineering department, Sultan Qaboos University, Muscat, Oman
26 shared publications - Sanket J. Joshi
Amity Institute of Microbial Technology, Amity University Rajasthan
21 shared publications F. H. Boukadi
Petroleum Engineering Department , University of Louisiana Lafayette , Lafayette, Louisiana, USA
10 shared publicationsSaif Al-Bahry
Department of Biology, College of Science, Sultan Qaboos University, Muscat, Oman
9 shared publicationsAbdulkadir Elshafie
Department of Biology, College of Science, Sultan Qaboos University, Muscat, Oman
8 shared publicationsAbdulkadir E. Elshafie
Sultan Qaboos University
6 shared publications
Latest Publications
- 26 March 2018
- Published by Society of Petroleum Engineers (SPE)
Alkaline-Biosurfactant-Biopolymer Process and its Potential for Enhancing Oil Recovery in Omani Oil Field
In present paper we ereport the evaluation and the application of Alkaline-Biosurfactant-Biopolymer (ABsBp) applications for enhancing oil recovery. Generally Alkaline-Surfactant-Polymer (ASP) studies have been carried out using chemical surfactants and polymers. This experimental investigation was performed to evaluate the possibility of using a biosurfactant and a biopolymer with sodium carbonate as an alkali for ASP flooding for the oil field. The candidate example reservoir was selected having favorable properties such as high permeability (500-1000 mD), low oil viscosity (20-25 cp), favorable total acid number (0.1 mg KOH/g oil) and high residual saturation (>20%). The current study was done to design an optimum composition of Alkali/Biosurfactant/Biopolymer (AbSbP) slug and apply it for enhancing oil recovery in both native reservoir cores and Berea sandstone core plugs. The interfacial tension (IFT) between various solutions containing alkali, biosurfactant and biopolymer was measured. Interfacial tension values in the range of 0.02-0.1mN/m were achieved at low biosurfactant and alkali concentrations. The interaction of the biopolymer with the brine, biosurfactant and alkali was investigated in terms of their effect on its viscosity at the reservoir temperature of 50°C. An AbSbP slug containing 1.1 wt.% sodium carbonate, 20 v/v% biosurfactant broth and 20 v/v% biopolymer broth was recommended for the final core flooding experiment. Core flooding experiments were conducted using reservoir cores and Berea cores by injecting the formulated AbS and AbSbP slugs after brine flooding. Maximum additional oil recovery obtained was 14% and 32% of oil initially in place (OIIP) from the reservoir cores and Berea cores respectively. Such difference in additional recovery was mainly due to the vast difference in the mineralogical composition of two rock types. This is the first report of application of Alkali-Biosurfactant-Biopolymer from Oman, showing additional oil from both native cores (from the Omani oil field) and Berea sandstone cores.
- 26 March 2018
- Published by Society of Petroleum Engineers (SPE)
Alkaline-Biosurfactant-Biopolymer Process and its Potential for Enhancing Oil Recovery in Omani Oil Field
In present paper we ereport the evaluation and the application of Alkaline-Biosurfactant-Biopolymer (ABsBp) applications for enhancing oil recovery. Generally Alkaline-Surfactant-Polymer (ASP) studies have been carried out using chemical surfactants and polymers. This experimental investigation was performed to evaluate the possibility of using a biosurfactant and a biopolymer with sodium carbonate as an alkali for ASP flooding for the oil field. The candidate example reservoir was selected having favorable properties such as high permeability (500-1000 mD), low oil viscosity (20-25 cp), favorable total acid number (0.1 mg KOH/g oil) and high residual saturation (>20%). The current study was done to design an optimum composition of Alkali/Biosurfactant/Biopolymer (AbSbP) slug and apply it for enhancing oil recovery in both native reservoir cores and Berea sandstone core plugs. The interfacial tension (IFT) between various solutions containing alkali, biosurfactant and biopolymer was measured. Interfacial tension values in the range of 0.02-0.1mN/m were achieved at low biosurfactant and alkali concentrations. The interaction of the biopolymer with the brine, biosurfactant and alkali was investigated in terms of their effect on its viscosity at the reservoir temperature of 50°C. An AbSbP slug containing 1.1 wt.% sodium carbonate, 20 v/v% biosurfactant broth and 20 v/v% biopolymer broth was recommended for the final core flooding experiment. Core flooding experiments were conducted using reservoir cores and Berea cores by injecting the formulated AbS and AbSbP slugs after brine flooding. Maximum additional oil recovery obtained was 14% and 32% of oil initially in place (OIIP) from the reservoir cores and Berea cores respectively. Such difference in additional recovery was mainly due to the vast difference in the mineralogical composition of two rock types. This is the first report of application of Alkali-Biosurfactant-Biopolymer from Oman, showing additional oil from both native cores (from the Omani oil field) and Berea sandstone cores.
- 26 March 2018
- Published by Society of Petroleum Engineers (SPE)
Biodegradation of Partially Hydrolyzed Polyacrylamide HPAM Using Bacteria Isolated from Omani Oil Fields
In present study the biodegradation of partially hydrolyzed polyacrylamide (HPAM) by bacterial strains isolated from Omani oil fields was analyzed. HPAMs are extensively used in oil fields for enhanced oil recovery operations. The produced water after polymer flooding poses grave ecological problems, such as it could raise the difficulty of oil–water separation, producing toxic acrylamide that degrades naturally, which threatens the local environment. Biodegradation of HPAM by microbes may be an efficient way to solve those problems. Microbial biodegradation is considered an environmentally friendly safe technique. The isolation of microbes that are able to degrade HPAM from the oil field produced water was investigated in this study. The bacterial isolates were identified by MALDI-Biotyper and the biodegradation of HPAM was analyzed by LC-MS and reduction in viscosity by rheometer. Two HPAM degrading bacterial strains Bacillus sp. (NP-10) and Chelatococcus sp. (NP-11) were isolated from the polymer-flooding produced water. The removal efficiency of HPAM based on shear viscosity for NP10 andNP11 were 59.9% and 58.4%, respectively after 9-days treatment period, at pH 7.1, 40 °C and 160 rpm. The addition of glucose (0.5 g/l) did not improve the HPAM degradation for NP11. However, the degradation percentage by NP10 reached to 68.8%. HPAM samples after bacterial biodegradation were analyzed by LC-MS. The results showed the presence of acrylamide monomers in the culture after biodegradation. Three other isolated strains were identified as NP-9, NP-2 and NP-8 were able to reduce the concentration of acrylamide significantly. Present findings proved that both Bacillus sp. (NP-10) and Chelatococcus sp. (NP-11) could be suitable candidates for biodegradation of HPAM and NP-9, NP-2 and NP-8 strains as potential candidates for reducing the acrylamide concentrations, as an environmental friendly approach.
- 26 March 2018
- Published by Society of Petroleum Engineers (SPE)
Biodegradation of Partially Hydrolyzed Polyacrylamide HPAM Using Bacteria Isolated from Omani Oil Fields
In present study the biodegradation of partially hydrolyzed polyacrylamide (HPAM) by bacterial strains isolated from Omani oil fields was analyzed. HPAMs are extensively used in oil fields for enhanced oil recovery operations. The produced water after polymer flooding poses grave ecological problems, such as it could raise the difficulty of oil–water separation, producing toxic acrylamide that degrades naturally, which threatens the local environment. Biodegradation of HPAM by microbes may be an efficient way to solve those problems. Microbial biodegradation is considered an environmentally friendly safe technique. The isolation of microbes that are able to degrade HPAM from the oil field produced water was investigated in this study. The bacterial isolates were identified by MALDI-Biotyper and the biodegradation of HPAM was analyzed by LC-MS and reduction in viscosity by rheometer. Two HPAM degrading bacterial strains Bacillus sp. (NP-10) and Chelatococcus sp. (NP-11) were isolated from the polymer-flooding produced water. The removal efficiency of HPAM based on shear viscosity for NP10 andNP11 were 59.9% and 58.4%, respectively after 9-days treatment period, at pH 7.1, 40 °C and 160 rpm. The addition of glucose (0.5 g/l) did not improve the HPAM degradation for NP11. However, the degradation percentage by NP10 reached to 68.8%. HPAM samples after bacterial biodegradation were analyzed by LC-MS. The results showed the presence of acrylamide monomers in the culture after biodegradation. Three other isolated strains were identified as NP-9, NP-2 and NP-8 were able to reduce the concentration of acrylamide significantly. Present findings proved that both Bacillus sp. (NP-10) and Chelatococcus sp. (NP-11) could be suitable candidates for biodegradation of HPAM and NP-9, NP-2 and NP-8 strains as potential candidates for reducing the acrylamide concentrations, as an environmental friendly approach.
- Open Access
- 21 March 2018
- Published by Wiley in Scientifica
- Vol. 2018, 1-10
Analysis of Bacterial Diversity in Different Heavy Oil Wells of a Reservoir in South Oman with Alkaline pH
The identification of potential hydrocarbon utilizing bacteria is an essential requirement in microbial enhanced oil recovery (MEOR). Molecular approaches like proteomic and genomic characterization of the isolates are replacing the traditional method of identification with systemic classification. Genotypic profiling of the isolates includes fingerprint or pattern-based technique and sequence-based technique. Understanding community structure and dynamics is essential for studying diversity profiles and is challenging in the case of microbial analysis. The present study aims to understand the bacterial community composition from different heavy oil contaminated soil samples collected from geographically related oil well areas in Oman and to identify spore-forming hydrocarbon utilizing cultivable bacteria. V4 region of 16S rDNA gene was the target for Ion PGM™. A total of 825081 raw sequences were obtained from Ion torrent from all the 10 soil samples. The species richness and evenness were found to be moderate in all the samples with four main phyla, Firmicutes, Bacteroidetes, Proteobacteria, and Actinobacteria, the most abundant being Firmicutes.Bacillussp. ubiquitously dominated in all samples followed byPaenibacillus, which was followed byBrevibacillus,Planococcus, andFlavobacterium. Principal Coordinate Analysis (PCoA) and UPGMA dendrogram clustered the 10 soil samples into four main groups. Weighted UniFrac significance test determined that there was significant difference in the communities present in soil samples examined. It can be concluded that the microbial community was different in all the 10 soil samples withBacillusandPaenibacillussp. as predominating genus. The 16S rDNA sequencing of cultivable spore-forming bacteria identified the hydrocarbon utilizing bacteria asBacillusandPaenibacillussp. and the nucleotide sequences were submitted to NCBI GenBank under accession numbers KP119097–KP119115.BacillusandPaenibacillussp., which were relatively abundant in the oil fields, can be recommended to be chosen as candidates for hydrocarbon utilization study.
- 21 March 2018
- Published by Wiley in Scientifica
- Vol. 2018, 1-10
Open AccessAnalysis of Bacterial Diversity in Different Heavy Oil Wells of a Reservoir in South Oman with Alkaline pH
The identification of potential hydrocarbon utilizing bacteria is an essential requirement in microbial enhanced oil recovery (MEOR). Molecular approaches like proteomic and genomic characterization of the isolates are replacing the traditional method of identification with systemic classification. Genotypic profiling of the isolates includes fingerprint or pattern-based technique and sequence-based technique. Understanding community structure and dynamics is essential for studying diversity profiles and is challenging in the case of microbial analysis. The present study aims to understand the bacterial community composition from different heavy oil contaminated soil samples collected from geographically related oil well areas in Oman and to identify spore-forming hydrocarbon utilizing cultivable bacteria. V4 region of 16S rDNA gene was the target for Ion PGM™. A total of 825081 raw sequences were obtained from Ion torrent from all the 10 soil samples. The species richness and evenness were found to be moderate in all the samples with four main phyla, Firmicutes, Bacteroidetes, Proteobacteria, and Actinobacteria, the most abundant being Firmicutes.Bacillussp. ubiquitously dominated in all samples followed byPaenibacillus, which was followed byBrevibacillus,Planococcus, andFlavobacterium. Principal Coordinate Analysis (PCoA) and UPGMA dendrogram clustered the 10 soil samples into four main groups. Weighted UniFrac significance test determined that there was significant difference in the communities present in soil samples examined. It can be concluded that the microbial community was different in all the 10 soil samples withBacillusandPaenibacillussp. as predominating genus. The 16S rDNA sequencing of cultivable spore-forming bacteria identified the hydrocarbon utilizing bacteria asBacillusandPaenibacillussp. and the nucleotide sequences were submitted to NCBI GenBank under accession numbers KP119097–KP119115.BacillusandPaenibacillussp., which were relatively abundant in the oil fields, can be recommended to be chosen as candidates for hydrocarbon utilization study.
- Open Access
- 7 January 2018
- Published by MDPI AG in Colloids and Interfaces
- Vol. 2 (1) , 1
Microbial-Enhanced Heavy Oil Recovery under Laboratory Conditions by Bacillus firmus BG4 and Bacillus halodurans BG5 Isolated from Heavy Oil Fields
Microbial Enhanced Oil Recovery (MEOR) is one of the tertiary recovery methods. The high viscosity and low flow characteristics of heavy oil makes it difficult for the extraction from oil reservoirs. Many spore-forming bacteria were isolated from Oman oil fields, which can biotransform heavy crude oil by changing its viscosity by converting heavier components into lighter ones. Two of the isolates, Bacillus firmus BG4 and Bacillus halodurans BG5, which showed maximum growth in higher concentrations of heavy crude oil were selected for the study. Gas chromatography analysis of the heavy crude oil treated with the isolates for nine days showed 81.4% biotransformation for B. firmus and 81.9% for B. halodurans. In both cases, it was found that the aromatic components in the heavy crude oil were utilized by the isolates, converting them to aliphatic species. Core flooding experiments conducted at 50 °C, mimicking reservoir conditions to prove the efficiency of the isolates in MEOR, resulted in 10.4% and 7.7% for B. firmus and B. halodurans, respectively, after the nine-day shut-in period. These investigations demonstrated the potential of B. firmus BG4 and B. halodurans BG5 as an environmentally attractive approach for heavy oil recovery.
- 7 January 2018
- Published by MDPI AG in Colloids and Interfaces
- Vol. 2 (1) , 1
Open AccessMicrobial-Enhanced Heavy Oil Recovery under Laboratory Conditions by Bacillus firmus BG4 and Bacillus halodurans BG5 Isolated from Heavy Oil Fields
Microbial Enhanced Oil Recovery (MEOR) is one of the tertiary recovery methods. The high viscosity and low flow characteristics of heavy oil makes it difficult for the extraction from oil reservoirs. Many spore-forming bacteria were isolated from Oman oil fields, which can biotransform heavy crude oil by changing its viscosity by converting heavier components into lighter ones. Two of the isolates, Bacillus firmus BG4 and Bacillus halodurans BG5, which showed maximum growth in higher concentrations of heavy crude oil were selected for the study. Gas chromatography analysis of the heavy crude oil treated with the isolates for nine days showed 81.4% biotransformation for B. firmus and 81.9% for B. halodurans. In both cases, it was found that the aromatic components in the heavy crude oil were utilized by the isolates, converting them to aliphatic species. Core flooding experiments conducted at 50 °C, mimicking reservoir conditions to prove the efficiency of the isolates in MEOR, resulted in 10.4% and 7.7% for B. firmus and B. halodurans, respectively, after the nine-day shut-in period. These investigations demonstrated the potential of B. firmus BG4 and B. halodurans BG5 as an environmentally attractive approach for heavy oil recovery.
- Open Access
- 28 September 2017
- Published by American Society for Microbiology in Microbiology Resource Announcements
- Vol. 5 (39) , e00969-17
Draft Genome Sequence of Bacillus subtilis AS2, a Heavy Crude Oil-Degrading and Biosurfactant-Producing Bacterium Isolated from a Soil Sample
Here, we report the draft genome sequence of Bacillus subtilis AS2 that was isolated from heavy crude oil-contaminated soil samples from sludge pits of an Omani heavy-oil field. B. subtilis AS2 was able to biodegrade heavy crude oil and produce biosurfactant. In order to provide a better understanding of the biodegradation mechanism and biosynthesis of metabolites, the B. subtilis AS2 genome was sequenced and compared to those of other B. subtilis strains.
- 28 September 2017
- Published by American Society for Microbiology in Microbiology Resource Announcements
- Vol. 5 (39) , e00969-17
Open AccessDraft Genome Sequence of Bacillus subtilis AS2, a Heavy Crude Oil-Degrading and Biosurfactant-Producing Bacterium Isolated from a Soil Sample
Here, we report the draft genome sequence of Bacillus subtilis AS2 that was isolated from heavy crude oil-contaminated soil samples from sludge pits of an Omani heavy-oil field. B. subtilis AS2 was able to biodegrade heavy crude oil and produce biosurfactant. In order to provide a better understanding of the biodegradation mechanism and biosynthesis of metabolites, the B. subtilis AS2 genome was sequenced and compared to those of other B. subtilis strains.
- Open Access
- 14 February 2017
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 12 (2) , e0171432
The potential of indigenous Paenibacillus ehimensis BS1 for recovering heavy crude oil by biotransformation to light fractions
Microbial Enhanced Oil Recovery (MEOR) is a potential technology for residual heavy oil recovery. Many heavy oil fields in Oman and elsewhere have difficulty in crude oil recovery because it is expensive due to its high viscosity. Indigenous microbes are capable of improving the fluidity of heavy oil, by changing its high viscosity and producing lighter oil fractions. Many spore-forming bacteria were isolated from soil samples collected from oil fields in Oman. Among the isolates, an autochthonous spore-forming bacterium was found to enhance heavy oil recovery, which was identified by 16S rDNA sequencing as Paenibacillus ehimensis BS1. The isolate showed maximum growth at high heavy oil concentrations within four days of incubation. Biotransformation of heavy crude oil to light aliphatic and aromatic compounds and its potential in EOR was analyzed under aerobic and anaerobic reservoir conditions. The isolates were grown aerobically in Bushnell-Haas medium with 1% (w/v) heavy crude oil. The crude oil analyzed by GC-MS showed a significant biotransformation from the ninth day of incubation under aerobic conditions. The total biotransformation of heavy crude oil was 67.1% with 45.9% in aliphatic and 85.3% in aromatic fractions. Core flooding experiments were carried out by injecting the isolates in brine supplemented with Bushnell-Haas medium into Berea sandstone cores and were incubated for twelve days under oil reservoir conditions (50°C). The extra recovered oil was analyzed by GC-MS. The residual oil recovered from core flood experiments ranged between 10–13% compared to the control experiment. The GC-MS analyses of the extra recovered oil showed 38.99% biotransformation of heavy to light oil. The results also indicated the presence of 22.9% extra aliphatic compounds in the residual crude oil recovered compared to that of a control. The most abundant compound in the extra recovered crude oil was identified as 1-bromoeicosane. The investigations showed the potential of P. ehimensis BS1 in MEOR technology by the biotransformation of heavy to lighter crude oil under aerobic and reservoir conditions. Heavy oil recovery and biotransformation to lighter components are of great economic value and a few studies have been done.
- 14 February 2017
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 12 (2) , e0171432
Open AccessThe potential of indigenous Paenibacillus ehimensis BS1 for recovering heavy crude oil by biotransformation to light fractions
Microbial Enhanced Oil Recovery (MEOR) is a potential technology for residual heavy oil recovery. Many heavy oil fields in Oman and elsewhere have difficulty in crude oil recovery because it is expensive due to its high viscosity. Indigenous microbes are capable of improving the fluidity of heavy oil, by changing its high viscosity and producing lighter oil fractions. Many spore-forming bacteria were isolated from soil samples collected from oil fields in Oman. Among the isolates, an autochthonous spore-forming bacterium was found to enhance heavy oil recovery, which was identified by 16S rDNA sequencing as Paenibacillus ehimensis BS1. The isolate showed maximum growth at high heavy oil concentrations within four days of incubation. Biotransformation of heavy crude oil to light aliphatic and aromatic compounds and its potential in EOR was analyzed under aerobic and anaerobic reservoir conditions. The isolates were grown aerobically in Bushnell-Haas medium with 1% (w/v) heavy crude oil. The crude oil analyzed by GC-MS showed a significant biotransformation from the ninth day of incubation under aerobic conditions. The total biotransformation of heavy crude oil was 67.1% with 45.9% in aliphatic and 85.3% in aromatic fractions. Core flooding experiments were carried out by injecting the isolates in brine supplemented with Bushnell-Haas medium into Berea sandstone cores and were incubated for twelve days under oil reservoir conditions (50°C). The extra recovered oil was analyzed by GC-MS. The residual oil recovered from core flood experiments ranged between 10–13% compared to the control experiment. The GC-MS analyses of the extra recovered oil showed 38.99% biotransformation of heavy to light oil. The results also indicated the presence of 22.9% extra aliphatic compounds in the residual crude oil recovered compared to that of a control. The most abundant compound in the extra recovered crude oil was identified as 1-bromoeicosane. The investigations showed the potential of P. ehimensis BS1 in MEOR technology by the biotransformation of heavy to lighter crude oil under aerobic and reservoir conditions. Heavy oil recovery and biotransformation to lighter components are of great economic value and a few studies have been done.
- Open Access
- 23 November 2016
- Published by Frontiers Media SA in Frontiers in Microbiology
- Vol. 7, 1853
Production, Characterization, and Application of Bacillus licheniformis W16 Biosurfactant in Enhancing Oil Recovery
The biosurfactant production by Bacillus licheniformis W16 and evaluation of biosurfactant based enhanced oil recovery using core-flood under reservoir conditions were investigated. Previously reported nine different production media were screened for biosurfactant production, and two were further optimized with different carbon sources (glucose, sucrose, starch, cane molasses or date molasses), as well as the strain was screened for biosurfactant production during the growth in different media. The biosurfactant reduced the surface tension and interfacial tension to 24.33+0.57mN m-1 and 2.47+0.32mN m-1 respectively within 72h, at 40 C, and also altered the wettability of a hydrophobic surface by changing the contact angle from 55.67°+1.6° to 19.54°+0.96°. The critical micelle dilution values of 4X were observed. The biosurfactants were characterized by different analytical techniques and identified as lipopeptide, similar to lichenysin-A. The biosurfactant was stable over wide range of extreme environmental conditions. The core flood experiments showed that the biosurfactant was able to enhance the oil recovery by 24-26% over residual oil saturation (Sor). The results highlight the potential application of lipopeptide biosurfactant in wettability alteration and microbial enhanced oil recovery processes.
- 23 November 2016
- Published by Frontiers Media SA in Frontiers in Microbiology
- Vol. 7, 1853
Open AccessProduction, Characterization, and Application of Bacillus licheniformis W16 Biosurfactant in Enhancing Oil Recovery
The biosurfactant production by Bacillus licheniformis W16 and evaluation of biosurfactant based enhanced oil recovery using core-flood under reservoir conditions were investigated. Previously reported nine different production media were screened for biosurfactant production, and two were further optimized with different carbon sources (glucose, sucrose, starch, cane molasses or date molasses), as well as the strain was screened for biosurfactant production during the growth in different media. The biosurfactant reduced the surface tension and interfacial tension to 24.33+0.57mN m-1 and 2.47+0.32mN m-1 respectively within 72h, at 40 C, and also altered the wettability of a hydrophobic surface by changing the contact angle from 55.67°+1.6° to 19.54°+0.96°. The critical micelle dilution values of 4X were observed. The biosurfactants were characterized by different analytical techniques and identified as lipopeptide, similar to lichenysin-A. The biosurfactant was stable over wide range of extreme environmental conditions. The core flood experiments showed that the biosurfactant was able to enhance the oil recovery by 24-26% over residual oil saturation (Sor). The results highlight the potential application of lipopeptide biosurfactant in wettability alteration and microbial enhanced oil recovery processes.
- Open Access
- 11 November 2016
- Published by Bentham Science Publishers Ltd. in The Open Biotechnology Journal
- Vol. 10 (1) , 301-311
Bioremediation of Heavy Crude Oil Contamination
Crude oil contamination is one of the major environmental concerns and it has drawn interest from researchers and industries. Heavy oils contain 24-64% saturates and aromatics, 14-39% resins and 11-45% asphaltene. Resins and asphaltenes mainly consist of naphthenic aromatic hydrocarbons with alicyclic chains which are the hardest to degrade. Crude oil biodegradation process, with its minimal energy need and environmentally friendly approach, presents an opportunity for bioremediation and as well for enhanced oil recovery to utilize heavy oil resources in an efficient manner. Biodegradation entails crude oil utilization as a carbon source for microorganisms that in turn change the physical properties of heavy crude oil by oxidizing aromatic rings, chelating metals and severing internal bonds/chains between molecules. Biodegradation does not necessarily lower quality of crude oil as there are cases where quality was improved. This paper provides information on heavy crude oil chemistry, bioremediation concept, biodegradation enzymes, cases of Microbial Enhanced heavy crude Oil Recovery (MEOR) and screening criteria towards a better understanding of the biodegradation application. Through the utilization of single microorganisms and consortia, researchers were able to biodegrade single pure hydrocarbon components, transform heavy crude oil fractions to lighter fractions, remove heavy metals and reduce viscosity of crude oil.
- 11 November 2016
- Published by Bentham Science Publishers Ltd. in The Open Biotechnology Journal
- Vol. 10 (1) , 301-311
Open AccessBioremediation of Heavy Crude Oil Contamination
Crude oil contamination is one of the major environmental concerns and it has drawn interest from researchers and industries. Heavy oils contain 24-64% saturates and aromatics, 14-39% resins and 11-45% asphaltene. Resins and asphaltenes mainly consist of naphthenic aromatic hydrocarbons with alicyclic chains which are the hardest to degrade. Crude oil biodegradation process, with its minimal energy need and environmentally friendly approach, presents an opportunity for bioremediation and as well for enhanced oil recovery to utilize heavy oil resources in an efficient manner. Biodegradation entails crude oil utilization as a carbon source for microorganisms that in turn change the physical properties of heavy crude oil by oxidizing aromatic rings, chelating metals and severing internal bonds/chains between molecules. Biodegradation does not necessarily lower quality of crude oil as there are cases where quality was improved. This paper provides information on heavy crude oil chemistry, bioremediation concept, biodegradation enzymes, cases of Microbial Enhanced heavy crude Oil Recovery (MEOR) and screening criteria towards a better understanding of the biodegradation application. Through the utilization of single microorganisms and consortia, researchers were able to biodegrade single pure hydrocarbon components, transform heavy crude oil fractions to lighter fractions, remove heavy metals and reduce viscosity of crude oil.
- 1 November 2016
- Published by Elsevier in Journal of Petroleum Science and Engineering
- Vol. 147, 218-227
Uniqueness, repeatability analysis and comparative evaluation of experimentally determined MMPs
- 1 November 2016
- Published by Elsevier in Journal of Petroleum Science and Engineering
- Vol. 147, 218-227
Uniqueness, repeatability analysis and comparative evaluation of experimentally determined MMPs
- Open Access
- 4 February 2016
- Published by Springer Nature in Journal of Petroleum Exploration and Production Technology
- Vol. 6 (4) , 787-799
Potential in heavy oil biodegradation via enrichment of spore forming bacterial consortia
- 4 February 2016
- Published by Springer Nature in Journal of Petroleum Exploration and Production Technology
- Vol. 6 (4) , 787-799
Open AccessPotential in heavy oil biodegradation via enrichment of spore forming bacterial consortia