Weiwei Zheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Weiwei Zheng has a total of 196 co-authors. Here are the top co-authors by number of shared publications:
Chun Chu
Department of Chemistry
12 shared publications- Andrew Hunter Davis
Department of Chemistry, Syracuse University, Syracuse, New York 13244, United States
11 shared publications - Bizhong Xia
Tsinghua Shenzhen International Graduate School, Tsinghua University, Shenzhen, China.
11 shared publications Elan Hofman
Department of Chemistry, Syracuse University, Syracuse, New York 13244, USA
11 shared publicationsShuya Li
Department of Chemistry
11 shared publications- Gyu Leem
Department of Chemistry, State University of New York, College of Environmental Science and Forestry, Syracuse, NY 13210, USA
9 shared publications
Latest Publications
- Open Access
- 5 August 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (32) , 22851-22864
Dopant-Directed Surface Energy Modulation for Controlled Growth and Color-Tunable Photoluminescence in Cu+-Doped Two-Dimensional CdSe Nanoplatelets
Two-dimensional (2D) semiconductor nanoplatelets (NPLs) are promising building blocks for optoelectronic applications due to their strong 1D quantum confinement and large lateral dimensions. While the growth mechanisms of pristine CdSe NPLs have been extensively studied, the influence of transition-metal dopants on 2D NPL growth remains poorly understood. Here, we investigate the growth behavior of Cu+-doped CdSe NPLs synthesized via a nucleation-doping colloidal approach. The introduction of Cu+ induces a dopant-modulated three-stage growth process. At 230 °C, Cu+ dopants initially decelerate NPL growth, stabilizing 2-monolayer (ML) CdSe NPLs in stage I. In stage II, these 2 ML NPLs undergo a dissolution–ripening process, ultimately leading to the formation of 3 ML NPLs in stage III. The resulting Cu-doped CdSe NPLs exhibit color-tunable photoluminescence (PL) arising from both the CdSe host excitonic emission (∼390–465 nm) and a broad, Stokes-shifted Cu+ dopant emission (∼520–640 nm), enabled by thickness-dependent bandgap modulation. This dopant-directed three-stage growth behavior is also observed in thicker Cu:CdSe NPLs (e.g., 4 ML). Theoretical simulations reveal that Cu+ doping increases the relative surface stabilization energy, stabilizing thinner NPLs and delaying the transition to thicker structures. This dopant-driven control over 2D NPL growth offers opportunities for engineering color-tunable and dopant-emissive optoelectronic materials.
- 5 August 2026
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 20 (32) , 22851-22864
Open AccessDopant-Directed Surface Energy Modulation for Controlled Growth and Color-Tunable Photoluminescence in Cu+-Doped Two-Dimensional CdSe Nanoplatelets
Two-dimensional (2D) semiconductor nanoplatelets (NPLs) are promising building blocks for optoelectronic applications due to their strong 1D quantum confinement and large lateral dimensions. While the growth mechanisms of pristine CdSe NPLs have been extensively studied, the influence of transition-metal dopants on 2D NPL growth remains poorly understood. Here, we investigate the growth behavior of Cu+-doped CdSe NPLs synthesized via a nucleation-doping colloidal approach. The introduction of Cu+ induces a dopant-modulated three-stage growth process. At 230 °C, Cu+ dopants initially decelerate NPL growth, stabilizing 2-monolayer (ML) CdSe NPLs in stage I. In stage II, these 2 ML NPLs undergo a dissolution–ripening process, ultimately leading to the formation of 3 ML NPLs in stage III. The resulting Cu-doped CdSe NPLs exhibit color-tunable photoluminescence (PL) arising from both the CdSe host excitonic emission (∼390–465 nm) and a broad, Stokes-shifted Cu+ dopant emission (∼520–640 nm), enabled by thickness-dependent bandgap modulation. This dopant-directed three-stage growth behavior is also observed in thicker Cu:CdSe NPLs (e.g., 4 ML). Theoretical simulations reveal that Cu+ doping increases the relative surface stabilization energy, stabilizing thinner NPLs and delaying the transition to thicker structures. This dopant-driven control over 2D NPL growth offers opportunities for engineering color-tunable and dopant-emissive optoelectronic materials.
- Open Access
- 26 January 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (19) , 11456-11470
Noble-metal-free metal hydroxide Co-catalyst coupled Mn( ii )-doped CdS nanorods with bridged charge transport for enhanced photocatalytic hydrogen generation
Noble-metal-free metal hydroxide (Ni(OH) 2 , Co(OH) 2 , and Fe(OH) 3 ) co-catalyst modified CdS NRs nanorods employ Mn( ii ) dopants as long-lived charge-carrier bridges for enhanced photocatalytic hydrogen generation from water.
- 26 January 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (19) , 11456-11470
Open AccessNoble-metal-free metal hydroxide Co-catalyst coupled Mn( ii )-doped CdS nanorods with bridged charge transport for enhanced photocatalytic hydrogen generation
Noble-metal-free metal hydroxide (Ni(OH) 2 , Co(OH) 2 , and Fe(OH) 3 ) co-catalyst modified CdS NRs nanorods employ Mn( ii ) dopants as long-lived charge-carrier bridges for enhanced photocatalytic hydrogen generation from water.
- Open Access
- 29 December 2025
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 502, 140981
Recent advances in formaldehyde adsorption by metal–organic frameworks for indoor air filtration
- 29 December 2025
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 502, 140981
Open AccessRecent advances in formaldehyde adsorption by metal–organic frameworks for indoor air filtration
- Open Access
- 20 June 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (7) , 3337-3348
Synergistic Solvent and Surface Engineering to Reduce VOC Loss in Tin Halide Perovskite Solar Cells
- 20 June 2025
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 10 (7) , 3337-3348
Open AccessSynergistic Solvent and Surface Engineering to Reduce VOC Loss in Tin Halide Perovskite Solar Cells
- Open Access
- 11 April 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (15) , 14941-14953
Tailoring Substitutional Sites for Efficient Lanthanide Doping in Lead-Free Perovskite Nanocrystals with Enhanced Near-Infrared Photoluminescence
The incorporation of rare earth lanthanide ions (Ln3+) into lead-free halide perovskite nanocrystals (NCs) is an effective and promising strategy to expand their optical, magnetic, and electrochemical properties. Herein, we designed and synthesized various Ln3+ (including Yb3+, Er3+, and Nd3+), doped Sb3+- or Bi3+-based and Sb3+/Bi3+ alloyed lead-free perovskite NCs, including vacancy-induced perovskite (A3B(III)2X9), double perovskite (A2B(I)B (III)X6), and layered-double perovskite (A4B(II)B(III)2X12) NCs with different energy transfer pathways to study the Ln3+ dopant photoluminescence (PL). While a small size mismatch between dopant ions and host substitutional sites are critical for efficient doping of many first-row transitional metal ion doped metal chalcogenides, surprisingly, the Ln3+ ions, including the large Nd3+ ions (112 pm), prefer smaller isovalent Sb(III) octahedral (Oh) sites (90 pm) instead of Bi(III) Oh sites (117 pm) in these lead-free perovskite NCs. Significantly, similar substitutional site-dependent Ln3+ doping efficiencies were obtained across all three different perovskite host lattices, despite differences in host-to-dopant energy transfer mechanisms, which can provide strong evidence of the preferred Sb3+ substitutional sites for lanthanide dopants in these lead-free perovskite lattices. The efficient Ln3+ doping in Sb3+-rich perovskite NCs leads to enhanced Ln3+ ion PL of the doped NCs. The preference of smaller Sb (III) over Bi(III) substitutional sites for Ln3+ dopants is attributed to the relatively high polarizabilities of lanthanide ions and the smaller cationic sites inside [SbX6]3- compared with [BiX6]3- octahedra. This study provides a fundamental understanding of Ln3+ doping behavior in lead-free perovskite NCs and opportunities for designing efficient Ln3+-doped functional materials by tuning the microenvironment of the host lattice for enhanced properties.
- 11 April 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (15) , 14941-14953
Open AccessTailoring Substitutional Sites for Efficient Lanthanide Doping in Lead-Free Perovskite Nanocrystals with Enhanced Near-Infrared Photoluminescence
The incorporation of rare earth lanthanide ions (Ln3+) into lead-free halide perovskite nanocrystals (NCs) is an effective and promising strategy to expand their optical, magnetic, and electrochemical properties. Herein, we designed and synthesized various Ln3+ (including Yb3+, Er3+, and Nd3+), doped Sb3+- or Bi3+-based and Sb3+/Bi3+ alloyed lead-free perovskite NCs, including vacancy-induced perovskite (A3B(III)2X9), double perovskite (A2B(I)B (III)X6), and layered-double perovskite (A4B(II)B(III)2X12) NCs with different energy transfer pathways to study the Ln3+ dopant photoluminescence (PL). While a small size mismatch between dopant ions and host substitutional sites are critical for efficient doping of many first-row transitional metal ion doped metal chalcogenides, surprisingly, the Ln3+ ions, including the large Nd3+ ions (112 pm), prefer smaller isovalent Sb(III) octahedral (Oh) sites (90 pm) instead of Bi(III) Oh sites (117 pm) in these lead-free perovskite NCs. Significantly, similar substitutional site-dependent Ln3+ doping efficiencies were obtained across all three different perovskite host lattices, despite differences in host-to-dopant energy transfer mechanisms, which can provide strong evidence of the preferred Sb3+ substitutional sites for lanthanide dopants in these lead-free perovskite lattices. The efficient Ln3+ doping in Sb3+-rich perovskite NCs leads to enhanced Ln3+ ion PL of the doped NCs. The preference of smaller Sb (III) over Bi(III) substitutional sites for Ln3+ dopants is attributed to the relatively high polarizabilities of lanthanide ions and the smaller cationic sites inside [SbX6]3- compared with [BiX6]3- octahedra. This study provides a fundamental understanding of Ln3+ doping behavior in lead-free perovskite NCs and opportunities for designing efficient Ln3+-doped functional materials by tuning the microenvironment of the host lattice for enhanced properties.
- 1 March 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (6) , 4460-4467
Photoinduced Hydrogen Atom Transfer Catalysis with Ruthenium Polypyridyl Coated-TiO2 Nanoparticles for Selective C–C Bond Cleavage in a Lignin Model Compound
- 1 March 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (6) , 4460-4467
Photoinduced Hydrogen Atom Transfer Catalysis with Ruthenium Polypyridyl Coated-TiO2 Nanoparticles for Selective C–C Bond Cleavage in a Lignin Model Compound
- 26 January 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (5) , 3200-3209
Lanthanide Doping into All-Inorganic Heterometallic Halide Layered Double Perovskite Nanocrystals for Multimodal Visible and Near-Infrared Emission
The introduction of lanthanide ions (Ln3+) into all-inorganic lead-free halide perovskites has captured significant attention in optoelectronic applications. However, doping Ln3+ ions into heterometallic halide layered double perovskite (LDP) nanocrystals (NCs) and their associated doping mechanisms remain unexplored. Herein, we report the first colloidal synthesis of Ln3+ (Yb3+, Er3+)-doped LDP NCs utilizing a modified hot-injection method. The resulting NCs exhibit efficient near-infrared (NIR) photoluminescence in both NIR-I and NIR-II regions, achieved through energy transfer down-conversion mechanisms. Density functional theory calculations reveal that Ln3+ dopants preferentially occupy the Sb3+ cation positions, resulting in a disruption of local site symmetry of the LDP lattices. By leveraging sensitizations of intermediate energy levels, we delved into a series of Ln3+-doped Cs4M(II)Sb2Cl12 (M(II): Cd2+ or Mn2+) LDP NCs via co-doping strategies. Remarkably, we observe a brightening effect of the predark states of Er3+ dopant in the Er3+-doped Cs4M(II)Sb2Cl12 LDP NCs owing to the Mn component acting as an intermediate energy bridge. This study not only advances our understanding of energy transfer mechanisms in doped NCs but also propels all-inorganic LDP NCs for a wider range of optoelectronic applications.
- 26 January 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (5) , 3200-3209
Lanthanide Doping into All-Inorganic Heterometallic Halide Layered Double Perovskite Nanocrystals for Multimodal Visible and Near-Infrared Emission
The introduction of lanthanide ions (Ln3+) into all-inorganic lead-free halide perovskites has captured significant attention in optoelectronic applications. However, doping Ln3+ ions into heterometallic halide layered double perovskite (LDP) nanocrystals (NCs) and their associated doping mechanisms remain unexplored. Herein, we report the first colloidal synthesis of Ln3+ (Yb3+, Er3+)-doped LDP NCs utilizing a modified hot-injection method. The resulting NCs exhibit efficient near-infrared (NIR) photoluminescence in both NIR-I and NIR-II regions, achieved through energy transfer down-conversion mechanisms. Density functional theory calculations reveal that Ln3+ dopants preferentially occupy the Sb3+ cation positions, resulting in a disruption of local site symmetry of the LDP lattices. By leveraging sensitizations of intermediate energy levels, we delved into a series of Ln3+-doped Cs4M(II)Sb2Cl12 (M(II): Cd2+ or Mn2+) LDP NCs via co-doping strategies. Remarkably, we observe a brightening effect of the predark states of Er3+ dopant in the Er3+-doped Cs4M(II)Sb2Cl12 LDP NCs owing to the Mn component acting as an intermediate energy bridge. This study not only advances our understanding of energy transfer mechanisms in doped NCs but also propels all-inorganic LDP NCs for a wider range of optoelectronic applications.
- Open Access
- 20 November 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 14 (48) , 14115-14123
Inserting an “atomic trap” for directional dopant migration in core/multi-shell quantum dots
Diffusion of atoms or ions in solid crystalline lattice is crucial in many areas of solid-state technology. However, controlling ion diffusion and migration is challenging in nanoscale lattices. In this work, we intentionally insert a CdZnS alloyed interface layer, with small cationic size mismatch with Mn(II) dopant ions, as an “atomic trap” to facilitate directional (outward and inward) dopant migration inside core/multi-shell quantum dots (QDs) to reduce the strain from the larger cationic mismatch between dopants and host sites. Furthermore, it was found that the initial doping site/environment is critical for efficient dopant trapping and migration. Specifically, a larger Cd(II) substitutional site (92 pm) for the Mn(II) dopant (80 pm), with larger local lattice distortion, allows for efficient atomic trapping and dopant migration; while Mn(II) dopant ions can be very stable with no significant migration when occupying a smaller Zn(II) substitutional site (74 pm). Density functional theory calculations revealed a higher energy barrier for a Mn(II) dopant hopping from the smaller Zn substitutional tetrahedral (Td) site as compared to a larger Cd substitutional Td site. The controlled dopant migration by “atomic trapping” inside QDs provides a new way to fine tune the properties of doped nanomaterials.
- 20 November 2023
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 14 (48) , 14115-14123
Open AccessInserting an “atomic trap” for directional dopant migration in core/multi-shell quantum dots
Diffusion of atoms or ions in solid crystalline lattice is crucial in many areas of solid-state technology. However, controlling ion diffusion and migration is challenging in nanoscale lattices. In this work, we intentionally insert a CdZnS alloyed interface layer, with small cationic size mismatch with Mn(II) dopant ions, as an “atomic trap” to facilitate directional (outward and inward) dopant migration inside core/multi-shell quantum dots (QDs) to reduce the strain from the larger cationic mismatch between dopants and host sites. Furthermore, it was found that the initial doping site/environment is critical for efficient dopant trapping and migration. Specifically, a larger Cd(II) substitutional site (92 pm) for the Mn(II) dopant (80 pm), with larger local lattice distortion, allows for efficient atomic trapping and dopant migration; while Mn(II) dopant ions can be very stable with no significant migration when occupying a smaller Zn(II) substitutional site (74 pm). Density functional theory calculations revealed a higher energy barrier for a Mn(II) dopant hopping from the smaller Zn substitutional tetrahedral (Td) site as compared to a larger Cd substitutional Td site. The controlled dopant migration by “atomic trapping” inside QDs provides a new way to fine tune the properties of doped nanomaterials.
- Open Access
- 14 November 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (22) , 22467-22477
Interfacial B-Site Ion Diffusion in All-Inorganic Core/Shell Perovskite Nanocrystals
All-inorganic metal halide perovskites (ABX3, X = Cl, Br, or I) show great potential for the fabrication of optoelectronic devices, but the toxicity and instability of lead-based perovskites limit their applications. Shell passivation with a more stable lead-free perovskite is a promising strategy to isolate unstable components from the environment as well as a feasible way to tune the optical properties. However, it is challenging to grow core/shell perovskite nanocrystals (NCs) due to the soft ionic nature of the perovskite lattice. In this work, we developed a facile method to grow a lead-free CsMnCl3 shell on the surface of CsPbCl3 NCs to form CsPbCl3/CsMnCl3 core/shell NCs with enhanced environmental stability and improved photoluminescence (PL) quantum yields (QYs). More importantly, the resulting core/shell perovskite NCs have color-tunable PL due to B-site ion diffusion at the interface of the core/shell NCs. Specifically, B-site Mn diffusion from the CsMnCl3 shell to the CsPbCl3 core leads to a Mn-doped CsPbCl3 core (i.e., Mn:CsPbCl3), which can turn on the Mn PL at around 600 nm. The ratio of Mn PL and host CsPbCl3 PL is highly tunable as a function of the thermal annealing time of the CsPbCl3/CsMnCl3 core/shell NCs. While the halide anion exchange for all-inorganic metal halide perovskites has been well-developed for band-gap-engineered materials, interfacial B-site diffusion in core/shell perovskite NCs is a promising approach for both tunable optical properties and enhanced environmental stability.
- 14 November 2023
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 17 (22) , 22467-22477
Open AccessInterfacial B-Site Ion Diffusion in All-Inorganic Core/Shell Perovskite Nanocrystals
All-inorganic metal halide perovskites (ABX3, X = Cl, Br, or I) show great potential for the fabrication of optoelectronic devices, but the toxicity and instability of lead-based perovskites limit their applications. Shell passivation with a more stable lead-free perovskite is a promising strategy to isolate unstable components from the environment as well as a feasible way to tune the optical properties. However, it is challenging to grow core/shell perovskite nanocrystals (NCs) due to the soft ionic nature of the perovskite lattice. In this work, we developed a facile method to grow a lead-free CsMnCl3 shell on the surface of CsPbCl3 NCs to form CsPbCl3/CsMnCl3 core/shell NCs with enhanced environmental stability and improved photoluminescence (PL) quantum yields (QYs). More importantly, the resulting core/shell perovskite NCs have color-tunable PL due to B-site ion diffusion at the interface of the core/shell NCs. Specifically, B-site Mn diffusion from the CsMnCl3 shell to the CsPbCl3 core leads to a Mn-doped CsPbCl3 core (i.e., Mn:CsPbCl3), which can turn on the Mn PL at around 600 nm. The ratio of Mn PL and host CsPbCl3 PL is highly tunable as a function of the thermal annealing time of the CsPbCl3/CsMnCl3 core/shell NCs. While the halide anion exchange for all-inorganic metal halide perovskites has been well-developed for band-gap-engineered materials, interfacial B-site diffusion in core/shell perovskite NCs is a promising approach for both tunable optical properties and enhanced environmental stability.
- Open Access
- 1 November 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (7)
Epitaxial Growth of Lead‐Free Double Perovskite Shell for CsPbX3/Cs2SnX6 (X = Cl, Br, and I) Core/Shell Perovskite Nanocrystals with Enhanced Photoelectric Properties and Stability
All‐inorganic lead halide perovskite nanocrystals (NCs) have great optoelectronic properties with promising applications in light‐emitting diodes (LEDs), lasers, photodetectors, solar cells, and photocatalysis. However, the intrinsic toxicity of Pb and instability of the NCs impede their broad applications. Shell‐coating is an effective method for enhanced environmental stability while reducing toxicity by choosing non‐toxic shell materials such as metal oxides, polymers, silica, etc. However, multiple perovskite NCs can be encapsulated within the shell material and a uniform epitaxial‐type shell growth of well‐isolated NCs is still challenging. In this work, lead‐free vacancy‐ordered double perovskite Cs2SnX6 (X = Cl, Br, and I) shells are epitaxially grown on the surface of CsPbX3 NCs by a hot‐injection method. The effectiveness of the non‐toxic double perovskite shell protection is demonstrated by the enhanced environmental and phase stability against UV illumination and water. In addition, the photoluminescence quantum yields (PL QYs) increase for the CsPbCl3 and CsPbBr3 NCs after shelling because of the type I band alignment of the core/shell materials, while enhanced charge transport properties obtained from CsPbI3/Cs2SnI6 core/shell NCs are due to the efficient charge separation in the type II core/shell band alignment.
- 1 November 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 34 (7)
Open AccessEpitaxial Growth of Lead‐Free Double Perovskite Shell for CsPbX3/Cs2SnX6 (X = Cl, Br, and I) Core/Shell Perovskite Nanocrystals with Enhanced Photoelectric Properties and Stability
All‐inorganic lead halide perovskite nanocrystals (NCs) have great optoelectronic properties with promising applications in light‐emitting diodes (LEDs), lasers, photodetectors, solar cells, and photocatalysis. However, the intrinsic toxicity of Pb and instability of the NCs impede their broad applications. Shell‐coating is an effective method for enhanced environmental stability while reducing toxicity by choosing non‐toxic shell materials such as metal oxides, polymers, silica, etc. However, multiple perovskite NCs can be encapsulated within the shell material and a uniform epitaxial‐type shell growth of well‐isolated NCs is still challenging. In this work, lead‐free vacancy‐ordered double perovskite Cs2SnX6 (X = Cl, Br, and I) shells are epitaxially grown on the surface of CsPbX3 NCs by a hot‐injection method. The effectiveness of the non‐toxic double perovskite shell protection is demonstrated by the enhanced environmental and phase stability against UV illumination and water. In addition, the photoluminescence quantum yields (PL QYs) increase for the CsPbCl3 and CsPbBr3 NCs after shelling because of the type I band alignment of the core/shell materials, while enhanced charge transport properties obtained from CsPbI3/Cs2SnI6 core/shell NCs are due to the efficient charge separation in the type II core/shell band alignment.