MSMohammed Sadeq

Mohammed Sadeq

*This is an algorithmically generated author record based on publicly available information.

Mohammed Sadeq has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    An Approach for Adjusting the Laboratory-Determined Dynamic Modulus Master Curve of Asphalt Layers Based on Falling Weight Deflectometer Measurements

    by Mohammed Alfarra, Okan Sirin, Mohammed Sadeq, Eyad Masad

    Structural assessment is critical for designing asphalt pavement overlays, estimating the remaining life of pavements, and selecting an appropriate rehabilitation strategy for existing pavements. The falling weight deflectometer (FWD) serves as the primary nondestructive test used for evaluating the in situ properties and structural capacity of asphalt pavements. The current procedure involves analyzing the FWD response and estimating layer moduli by assuming an elastic response. However, the response of asphalt layers is viscoelastic (i.e., temperature- and frequency-dependent). This study proposes an approach that combines FWD data with laboratory measurements of the dynamic moduli of field cores to determine the in situ viscoelastic properties of asphalt layers. This approach is implemented by analyzing FWD data from four pavement sections in Qatar. Furthermore, the paper includes a comparative analysis of the response of pavement sections in which the asphalt layers are modeled using dynamic modulus master curves obtained from laboratory tests and those obtained using the approach presented in this study. It was found that using the laboratory-based master curves overestimated pavement performance (i.e., underestimated pavement distresses). It is recommended to use the dynamic moduli from the method presented in this paper for a more accurate estimation of pavement response and performance.


  • Open Access

    Assessment of the Current Frequency Calculation Methods Used in the Determination of the Dynamic Modulus Value in Pavement Design and Analysis

    by Mohammed A. Alfarra, Mohammed Sadeq, Husam Sadek

    The dynamic modulus |E*| is used in the Mechanistic-Empirical Pavement Design Guide (MEPDG) to express the viscoelasticity of asphalt material at a range of temperatures and loading frequencies. As a result, the current MEPDG method assumes that frequency is calculated as the opposite of vehicular loading pulse time. In addition, the loading pulse time can be calculated using the Odemark thickness equivalency method according to the MEPDG. On the other hand, the loading frequency as per Qatar Highway Design Manual (QHDM 2021) is estimated based on the average vehicle speed using Losa and Di Natale formula. However, studies found major inadequacies in the adopted method of MEPDG, which might affect the accuracy of the loading frequency and |E*| accordingly which leads to an impact on the pavement design and performance analysis. Hence, it was recommended that alternative frequency determination approaches like the Fast Fourier Transform (FFT) be used rather than traditional time-domain techniques. Therefore, this paper compares the results of the MEPDG and QHDM loading frequency procedure with the dominant frequencies (DF) obtained using the FFT. On the other hand, the loading time pulses are estimated using the Odemark approach and, compared to the ones simulated using 3D Move Analysis software that accurately considers the tire contact pressure, viscoelastic properties, & vehicle speed. It was found that the used frequency determination approach in the pavement design in Qatar, overestimates the frequency values by about 30% to 88%. Furthermore, the findings showed that the MEPDG method for determining loading time and frequency is not conservative.


  • Open Access

    New Technique for Flood Risk Assessment of Sub-Networks in Large Networks Using InfoWorks ICM: A Case Study of Qatar's Full Storm Water Network

    by Yahia Alabbasi, Khaled Aboelenen, Mohammed Sadeq

    The elements of the storm water network are made to safely drain most water during a heavy rainstorm. Flood risk modelling (mathematical modelling) with hydraulic software is a good way to check the network's level of service, especially now that technology has changed. Flood risk modelling is an essential method for checking the network sufficiency and adequacy for different kinds of rain. Modelling flood risk should be done for the whole network to ensure that flows are connected and get accurate results. In this study, one-dimensional flood risk modelling is needed for a sub-network that is part of Qatar's full storm water network. The flood risk modelling is conducted using InfoWorks ICM software. Running the whole model takes a lot of computational data processing. Splitting the entire stormwater network to the concerned sub-network without considering the hydraulic effects of upstream and downstream flows at the boundary conditions of the sub-network will lead to erroneous conclusions. In this research, a new method for hydraulically dividing the network into sub-networks is presented, taking into account the characteristics of the boundaries. This method increases the efficiency and viability of hydraulic modelling for sub-networks in big networks. For purposes of validation, the results of the reduced model in terms of flood depths and volumes are compared with those of the full model. The results of the split model are in good agreement with the entire model.

  • Open Access

    Pavement Automated Condition Assessment Model Using Unmanned Aerial Vehicle and Convolutional Neural Network

    by Vinay Chawla, Carol Massarra, Husam Sadek, Zhen Zhu, Mohammed Sadeq

    Assessing pavement condition is essential in any efforts to reduce future economic losses and improve the pavement performance. The resulting data are used as a record to evaluate pavement performance and assess their functionality and reliability. Traditional pavement condition assessment approaches rely on expert visual inspection and observational information along with testing using specialized equipment. However, these approaches are challenging because of the cost associated with assessment, safety issues, and the accessibility restrictions, especially after natural hazard events. This paper aims to develop an automated classification model to rapidly assess pavement condition by classifying pavement distresses using image classification that is based on Convolutional Neural Network (CNN) model. High-resolution aerial images representing alligator and longitudinal cracks for flexible pavements are collected using Unmanned Aerial Vehicle (UAV) images. The results of the developed model indicate an accuracy of 96.7% in classifying the two categories of pavement distress, while the use of UAV provides flexibility and manoeuvrability to capture the necessary data without risking personal safety and provides operational benefits in relatively lesser time. The methodology behind the developed model will help to reduce the need for on-site presence, increase safety, and assist emergency response managers in deciding the safest route to take after hurricane events. Additionally, application of the model will enable pavement engineers in rapidly assessing the pavement damage, aid in making quick decisions for road rehabilitation and recovery, and devise a restoration or repair plan.


  • A framework for the analysis of damage and recovery characteristics of asphalt mixtures

    by Mohammed Sadeq, Chien-Wei Huang, Eyad Masad, Hussain Al-Khalid, Okan Sirin

    This study presents two approaches for evaluating damage and recovery characteristics of asphalt mixtures. The first approach focuses on determining damage by extracting recoverable viscoelastic strain that has no damage and comparing it with the strain response of a material that has damage. The second approach is based on identifying the capacity of asphalt mixtures to recover some of the damage that may occur during creep loading. The advantage of these approaches is that they utilise experimental data to extract damage and recovery responses, without detailed mathematical modelling of material behaviour. The developed approaches are used to analyse the behaviours of fine aggregate mixtures (FAM) incorporating warm mix additives. The results show that these mixtures vary in their damage and recovery characteristics. For example, Sasobit FAM experienced the highest damage among mixtures, but it also had the highest recovery. Ageing was found to reduce the differences among mixtures in terms of resistance to damage, but it had less effect on the differences in their healing potential.


  • A two-constituent nonlinear viscoelastic model for asphalt mixtures

    by Bhaskar Vajipeyajula, Eyad Masad, K. Lakshmi Roja, Mohammed Sadeq, Kumbakonam Rajagopal

    The goal of this study is to model the creep and recovery response of fine asphalt mixtures using a thermodynamically consistent nonlinear viscoelastic model. The model considers asphalt mixture to consist of two constituents: aggregate structure incorporating the asphalt–aggregate interface and asphalt binder. The efficacy of the model is evaluated using the response of warm fine aggregate mixtures (WFAM). These materials were produced using a polymer-modified binder of PG 76-22 and three warm mix additives (Sasobit, Advera and Rediset). Unaged and aged samples were subjected to creep stress levels of 75 and 400 kPa followed by rest periods. The model was quite successful in capturing the material behaviour as a single set of parameters were derived from the prediction of shear and normal stress responses for both 75 and 400 kPa stress levels. The presented model offers a unique feature in modelling the energy storage and dissipation of each of the two constituents. As such, one can examine the effect of changes in individual material properties on the material response and performance.


  • Linear and nonlinear viscoelastic and viscoplastic analysis of asphalt binders with warm mix asphalt additives

    by Mohammed Sadeq, Eyad Masad, Hussain Al-Khalid, Okan Sirin, Loujaine Mehrez

    Warm-Mix Asphalt (WMA) is a widely used product, which proved a contribution to the reduction in asphalt mixing and compaction temperatures. This reduction leads to lower fuel consumption and smoke emission in asphalt plants. Most of the characterisation of binders used in WMA has focused in the past on measuring linear viscoelastic properties and associated Superpave parameters. Several studies have shown that the average stresses and strains of the asphalt mixture remain mostly within the linear viscoelastic response. However, localised strains in the binder phase of the mixture could reach values high enough to induce nonlinear viscoelastic and viscoplastic deformations. Therefore, this study focuses on an experimental and analytical evaluation of linear, nonlinear viscoelastic and viscoplastic responses of selected binders modified for use in WMA. The first part of the paper analyses the linear viscoelastic material properties and their ability to evaluate permanent deformation resistance. Then, the non-recoverable creep compliance parameter obtained from the Multiple Stress Creep Recovery (MSCR) test is analysed to assess the nonlinear response and permanent deformation of asphalt binders. The paper utilises a nonlinear plasto-viscoelastic (NPVE) approach to assess and quantify the nonlinear plasto-viscoelastic response of binders by separating the recoverable and irrecoverable strains measured in the MSCR test. Two WMA additives were included in this study by mixing them with polymer-modified and unmodified asphalt binders. Analysis of results showed that the NPVE approach captured a higher percentage of recovery than the NLVE approach. However, binder’s performance evaluation and ranking did not change by adopting the NPVE approach. The nonlinear viscoelastic parameters provided insight on the behaviour of asphalt binders mixed with WMA additives during loading cycles. Sasobit showed higher influence than Advera on binders in resisting permanent deformation by increasing the recoverable strain during the unloading phase.