JCJoseph Páez Chávez

Joseph Páez Chávez

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Joseph Páez Chávez has a total of 87 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Bifurcation-based mechanical sensing of microchannels using microrobots

    by Andrew Bickerdike, Joseph Páez Chávez, Yang Liu, Antoine Ferreira

    We present a minimally invasive method for probing the mechanical properties of soft-walled microchannels by analyzing the bifurcations in the periodic motion of a magnetically actuated microrobot. Under oscillatory magnetic excitation, the microrobot undergoes transitions, including grazing and fold bifurcations, during wall interactions that are highly sensitive to local stiffness and damping. Experiments and numerical continuation reveal consistent bifurcation shifts across channels of varying compliance, enabling mechanical characterization through frequency-dependent response. A piecewise-smooth dynamical model incorporating fluid damping and compliant boundaries captures the observed behaviors. This bifurcation-based approach leverages dynamic signatures to provide a sensitive method for mechanical sensing in simplified confined environments. It lays the groundwork for future extensions towards applications in tissue diagnostics, vascular health monitoring, and soft material characterization.


  • Emergence of Chaos in a Coinfection Model of HIV/AIDS and Mpox with Treatment Constraints

    by Hakan Ahmad Fatahillah, Joseph Páez Chávez, Dipo Aldila


  • Open Access

    Reassessment of public awareness and prevention strategies for HIV and COVID-19 co-infections through epidemic modeling

    by Dipo Aldila, Joseph Páez Chávez, Bayu Nugroho, Benjamin Idoko Omede, Olumuyiwa James Peter, Putri Zahra Kamalia

    A co–infection model between HIV and COVID-19 that takes into account COVID-19 vaccination and public awareness is discussed in this article. Rigorous analysis of the model is conducted to establish the existence and local stability conditions of the single-infection models. We discover that when the corresponding reproduction number for COVID-19 and HIV exceeds one, the disease continues to exist in both single-infection models. Furthermore, HIV will always be eradicated if its reproduction number is less than one. Nevertheless, this does not apply to the single-infection COVID-19 model. Even when the fundamental reproduction number is less than one, an endemic equilibrium point may exist due to the potential for a backward bifurcation phenomenon. Consequently, in the single-infection COVID-19 model, bistability between the endemic and disease-free equilibrium may arise when the basic reproduction number is less than one. From the co–infection model, we find that the reproduction number of the co–infection model is the maximum value between the reproduction number of HIV and COVID-19. Our numerical continuation experiments on the co–infection model reveal a threshold indicating that both HIV and COVID-19 may coexist within the population. The disease-free equilibrium for both HIV and COVID-19 is stable only if the reproduction numbers are less than one. Additionally, our two-parameter continuation analysis of the bifurcation diagram shows that the condition where both reproduction numbers equal one serves as an organizing center for the dynamic behavior of the co-infection model. An extended version of our model incorporates four different interventions: face mask usage, vaccination, and public awareness for COVID-19, as well as condom use for HIV, formulated as an optimal control problem. The Pontryagin’s Maximum Principle is employed to characterize the optimal control problem, which is solved using a forward-backward iterative method. Numerical investigations of the optimal control model highlight the critical role of a well-designed combination of interventions to achieve optimal reductions in the spread of both HIV and COVID-19.


  • Delayed feedback control and parameter continuation of multistability in a nonsmooth hydraulic rock drill model

    by Siyuan Chang, Wei Ma, Min Ye, Joseph Páez Chávez, Yelin Li, Yuchuan Ma, Jiale Zhang

    In response to the complex multistable behavior observed in hydraulic rock drills during the drilling process, this study first establishes a four-degree-of-freedom physical model based on dry friction rock mechanics theory. The motion trajectory is classified into three states: non-viscous, impact viscous, and buffer viscous. Using the impact frequency ω as the bifurcation parameter, multistable attractors p0q1 and p1q2 are identified in the system when ω = 9. To control the multistability, a delayed feedback control method is applied, in which the infinite-dimensional delay differential equations are approximated by finite-dimensional ordinary differential equations. The reliability of this approximation is validated through a distance function. When the control gain K = 9 and the delay time τd = 0.35, both attractors p0q1 and p1q2 are successfully converted into a single p0q1 attractor. Next, the pseudo-arclength continuation method and Floquet theory are employed to investigate parameter continuation and parameter domains. The period-doubling bifurcation points PD1 and PD2 divide the parameter space of K and τd into three distinct regions. Crossing these regions induces a supercritical period-doubling bifurcation. For constant K, a smaller τd leads to an increased number of collisions and periodic motions in the system. Simulation results demonstrate that by tuning the delay parameters, the multistability during the drilling process can be effectively controlled, thereby enhancing drilling efficiency and stability. Finally, rock drilling experiments confirm the validity of the model and the presence of multistability. When drilling into rocks with high hardness and brittleness, multistable motions are more likely to occur.


  • Open Access

    Dynamics of the vibro-impact capsule robot with a von Mises truss

    by Yao Yan, Joseph Páez Chávez, Jiajia Shen, Yang Liu

    Functionalised nonlinear structures employing structural instabilities for rapid response shape-shifting are emerging technologies with a wide range of potential applications. The von Mises truss is a widely employed model for such functionalised nonlinear structures; however, few studies have delved into its functionality when integrated with a complex dynamical system. This paper investigates its efficacy on enhancing the progression speed of a vibration-driven robot, known as the vibro-impact capsule robot, which is a piecewise-smooth dynamical system having abundant coexisting attractors. Bifurcation analysis of the capsule robot integrated with a von Mises truss is conducted for this purpose. Our numerical studies focus on the influence of the frequency and amplitude of the robot’s driving force on its progression. Specifically, we compare the periodic responses of both the capsule robots with and without the von Mises truss, utilising the numerical continuation techniques for piecewise-smooth dynamical systems. Our studies confirm the advantage of using the von Mises truss when the driving force of the robot is significantly small. Additionally, we identify an optimal operational regime on the amplitude-frequency control plane, where the maximum robot speed is achieved for a given amount of power consumption. The numerical studies presented in this work provide a promising indication of the advantages offered by the von Mises truss for vibration-driven robots. This research underscores the significant potential of functionalised nonlinear structures to enhance the efficiency of small-scale robots operating under power limitations.


  • Open Access

    An optimization approach to establish dynamical equivalence for soft and rigid impact models

    by Bo Tian, Shan Yin, Joseph Páez Chávez, Yang Liu

    This paper studies a computational approach aimed at establishing equivalent dynamical responses within oscillatory impacting systems subject to soft and rigid constraints. The proposed method incorporates an adaptive differential evolution algorithm with the Metropolis criterion to determine the stiffness and damping parameters of the soft constraint for a prescribed coefficient of restitution governing the rigid constraint. The proposed algorithm aims to establish an equivalent dynamical response of the two models based on constraints regarding energy dissipation and contact time duration. Upon examining the dynamical responses of the two impact cases, they exhibit nearly identical outcomes in the two-parameter bifurcation diagrams when subjected to a large restitution coefficient. However, discrepancies arise between the results of the two models when the restitution coefficient is low. Detailed numerical tests, conducted using the proposed method, demonstrate enhanced effectiveness compared to previous techniques, such as the prediction formulas for the different related soft impact model outlined by Okolewski and Blazejczyk-Okolewska [Chaos 31(8), 083110 (2021)]. This method not only finds application in experimentally identifying the physical properties of an impact surface but also provides convenience in employing soft models within impacting systems, which could then avoid potential inaccuracies in handling discontinuities by some integrator during velocity jumps before and after impacts.


  • Rocking block stability under periodic and random perturbations

    by Esther D. Gutiérrez, Joseph Páez Chávez, Alexander López


  • Open Access

    Multi-objective optimization of a self-propelled capsule for small bowel endoscopy considering the influence of intestinal environment

    by Zhu Jiapeng, Liao Maolin, Joseph Páez Chávez, Liu Yang, Li Tingrui