Ebrahim Al-Hajri
Research Subjects
Ebrahim Al-Hajri has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
Michael M. Ohadi
7 shared publications- Amir Shooshtari
Department of Mechanical Engineering, University of Maryland, College Park, MD 20742, USA
6 shared publications Harish Ganapathy
6 shared publicationsSerguei Dessiatoun
Department of Mechanical Engineering, University of Maryland, College Park, Maryland, USA
6 shared publicationsMichael Ohadi
Department of Mechanical Engineering, University of Maryland, College Park, MD, USA
4 shared publications- Michael Ohadi
Department of Mechanical Engineering, University of Maryland, College Park, MD 20742, USA
4 shared publications
Latest Publications
- Open Access
- 27 September 2026
- Published by Wiley in Advanced Science
- p. e77902
Tailoring Electronic Structure of NbB 2 Nanorods Through Selenium Incorporation for Synergistically Enhanced Hydrogen Evolution and Triboelectric Energy Harvesting
The sluggish hydrogen evolution reaction (HER) kinetics of non‐noble‐metal catalysts remain a major challenge for efficient hydrogen production. Herein, selenium‐doped niobium diboride (Se‐NbB 2 ) nanorods were synthesized via a molten‐salt‐assisted route followed by microwave‐assisted treatment, yielding a catalyst with higher conductivity and superior electrocatalytic performance. HER activity reveals that Se‐NbB 2 exhibits excellent performance, requiring an overpotential of only 147 mV to achieve 10 mA cm − 2 and maintaining stable operation for more than 6 days under alkaline conditions. Furthermore, the catalyst demonstrates efficient bifunctional water‐splitting performance, delivering 10 mA cm − 2 at a cell voltage of 1.79 V. First‐principles calculations reveal that Se incorporation modulates the electronic structure of NbB 2 by shifting the Nb d‐band center upward and improving electrical conductivity, thereby optimizing hydrogen adsorption free energy toward thermoneutral conditions and accelerating HER kinetics. Beyond electrocatalysis, Se‐NbB 2 was employed as an electrode material in a triboelectric nanogenerator (TENG), generating a maximum output voltage of 703 V and a current of 33 µA. The enhanced catalytic and triboelectric performances are attributed to improved conductivity and charge‐transport characteristics induced by selenium incorporation. This work highlights heteroatom‐mediated electronic‐structure engineering as an effective strategy for developing multifunctional transition‐metal boride materials for sustainable energy conversion, hydrogen generation, and energy‐harvesting technologies.
- 27 September 2026
- Published by Wiley in Advanced Science
- p. e77902
Open AccessTailoring Electronic Structure of NbB 2 Nanorods Through Selenium Incorporation for Synergistically Enhanced Hydrogen Evolution and Triboelectric Energy Harvesting
The sluggish hydrogen evolution reaction (HER) kinetics of non‐noble‐metal catalysts remain a major challenge for efficient hydrogen production. Herein, selenium‐doped niobium diboride (Se‐NbB 2 ) nanorods were synthesized via a molten‐salt‐assisted route followed by microwave‐assisted treatment, yielding a catalyst with higher conductivity and superior electrocatalytic performance. HER activity reveals that Se‐NbB 2 exhibits excellent performance, requiring an overpotential of only 147 mV to achieve 10 mA cm − 2 and maintaining stable operation for more than 6 days under alkaline conditions. Furthermore, the catalyst demonstrates efficient bifunctional water‐splitting performance, delivering 10 mA cm − 2 at a cell voltage of 1.79 V. First‐principles calculations reveal that Se incorporation modulates the electronic structure of NbB 2 by shifting the Nb d‐band center upward and improving electrical conductivity, thereby optimizing hydrogen adsorption free energy toward thermoneutral conditions and accelerating HER kinetics. Beyond electrocatalysis, Se‐NbB 2 was employed as an electrode material in a triboelectric nanogenerator (TENG), generating a maximum output voltage of 703 V and a current of 33 µA. The enhanced catalytic and triboelectric performances are attributed to improved conductivity and charge‐transport characteristics induced by selenium incorporation. This work highlights heteroatom‐mediated electronic‐structure engineering as an effective strategy for developing multifunctional transition‐metal boride materials for sustainable energy conversion, hydrogen generation, and energy‐harvesting technologies.
- Top Cited PapersOpen Access
- 16 March 2026
- Published by Elsevier in Progress in Materials Science
- Vol. 161
Progress and prospects of Ni–Co layered double hydroxides for advanced energy storage in rechargeable supercapacitors and batteries
- 16 March 2026
- Published by Elsevier in Progress in Materials Science
- Vol. 161
Top Cited PapersOpen AccessProgress and prospects of Ni–Co layered double hydroxides for advanced energy storage in rechargeable supercapacitors and batteries
- Open Access
- 17 January 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 668
Achieving superior supercapacitor performance through synergistic integration of reduced graphene oxide and antimony-doped tin oxide nanostructures
- 17 January 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 668
Open AccessAchieving superior supercapacitor performance through synergistic integration of reduced graphene oxide and antimony-doped tin oxide nanostructures
- Top Cited PapersOpen Access
- 18 March 2022
- Published by Elsevier in Applied Thermal Engineering
- Vol. 210
High performance, microarchitected, compact heat exchanger enabled by 3D printing
- 18 March 2022
- Published by Elsevier in Applied Thermal Engineering
- Vol. 210
Top Cited PapersOpen AccessHigh performance, microarchitected, compact heat exchanger enabled by 3D printing
- 1 April 2018
- Published by Elsevier in Applied Thermal Engineering
- Vol. 134, 248-255
Performance characteristics of a novel shell and tube heat exchanger with shell side interstitial twisted tapes for viscous fluids application
- 1 April 2018
- Published by Elsevier in Applied Thermal Engineering
- Vol. 134, 248-255
Performance characteristics of a novel shell and tube heat exchanger with shell side interstitial twisted tapes for viscous fluids application
- 26 June 2017
- Published by ASME International
Detailed Dynamic Model of an Institutional Building in Hot and Humid Climate Conditions
This paper is an ASHRAE Level 3 study of the energy audit process carried out in an institutional building, The Umm Shaif Building, of The Petroleum Institute, Abu Dhabi, UAE. It undertakes the study by collecting data and conditional surveys. The energy loss locations are highlighted through psychrometric and infrared camera analysis. The detailed dynamic model has been simulated using the EnergyPlus® simulation engine. The details of the building envelope, and fenestration, the occupancy schedules, the equipment energy consumption and HVAC details are presented. The detailed building model is used to allocate the energy usage and identify key energy consumers. The main results are reported using monthly total energy consumption. The validation and calibration are performed through different statistical metrics including Coefficient of Determination (R2), Root Mean Square Error (RMSE) and Coefficient of Variance Root Mean Square Error (CVRMSE). Finally, energy conservation measures are suggested with the energy and cost savings.
- 26 June 2017
- Published by ASME International
Detailed Dynamic Model of an Institutional Building in Hot and Humid Climate Conditions
This paper is an ASHRAE Level 3 study of the energy audit process carried out in an institutional building, The Umm Shaif Building, of The Petroleum Institute, Abu Dhabi, UAE. It undertakes the study by collecting data and conditional surveys. The energy loss locations are highlighted through psychrometric and infrared camera analysis. The detailed dynamic model has been simulated using the EnergyPlus® simulation engine. The details of the building envelope, and fenestration, the occupancy schedules, the equipment energy consumption and HVAC details are presented. The detailed building model is used to allocate the energy usage and identify key energy consumers. The main results are reported using monthly total energy consumption. The validation and calibration are performed through different statistical metrics including Coefficient of Determination (R2), Root Mean Square Error (RMSE) and Coefficient of Variance Root Mean Square Error (CVRMSE). Finally, energy conservation measures are suggested with the energy and cost savings.
- 11 November 2016
- Published by ASME International
Morphological Characterization of Fouling on Air Cooled Fin Fan Heat Exchangers
In today’s fast growing world where availability of energy has become a major concern, the cost of performance demands optimum heat exchange performance over extended periods of operational times. Fouling is one major factor that drastically affects heat exchanger performance. Most of the oil & gas processing plants in the Middle East are located in deserts. Due to scarcity of water most of the installed heat exchangers are air-cooled. These heat exchangers are at high risk of low performance due to dusty/sticky particulate fouling. In order to identify possible active/passive methods to control or ideally eliminate particulate fouling, as a first step, it is desirable to know exact morphology of such particulate fouling. This study presents morphological characterization of selected fouling samples from eight different installed fin fan heat exchangers. The scanning electron microscope (SEM) tests are carried out to determine standard characteristics and size of sample foulant powder. Variability in sizes and shapes is found between samples perhaps due to different working temperature ranges of the selected heat exchangers. The semi quantitative sample composition measured by energy dispersion x-ray micro analysis was as following: 26.50% Si, 26.12% Ca, 10.07% C and 9% Al with traces of Fe, Na, Mg, Cl, and some other salts. X-ray diffraction analysis revealed presence of quartz, calcite and alumina with traces of halite and hematite. The diversity of these fouling samples reflects complexity with respect to their potential removal and effects on heat transfer.
- 11 November 2016
- Published by ASME International
Morphological Characterization of Fouling on Air Cooled Fin Fan Heat Exchangers
In today’s fast growing world where availability of energy has become a major concern, the cost of performance demands optimum heat exchange performance over extended periods of operational times. Fouling is one major factor that drastically affects heat exchanger performance. Most of the oil & gas processing plants in the Middle East are located in deserts. Due to scarcity of water most of the installed heat exchangers are air-cooled. These heat exchangers are at high risk of low performance due to dusty/sticky particulate fouling. In order to identify possible active/passive methods to control or ideally eliminate particulate fouling, as a first step, it is desirable to know exact morphology of such particulate fouling. This study presents morphological characterization of selected fouling samples from eight different installed fin fan heat exchangers. The scanning electron microscope (SEM) tests are carried out to determine standard characteristics and size of sample foulant powder. Variability in sizes and shapes is found between samples perhaps due to different working temperature ranges of the selected heat exchangers. The semi quantitative sample composition measured by energy dispersion x-ray micro analysis was as following: 26.50% Si, 26.12% Ca, 10.07% C and 9% Al with traces of Fe, Na, Mg, Cl, and some other salts. X-ray diffraction analysis revealed presence of quartz, calcite and alumina with traces of halite and hematite. The diversity of these fouling samples reflects complexity with respect to their potential removal and effects on heat transfer.
- 11 November 2016
- Published by ASME International
Numerical Simulation of Manifold Microchannel Heat Exchanger
The quest to achieve higher heat transfer rate, smaller size and minimum pressure drop is a main area of focus in the design of heat exchangers. Plate heat exchangers are one of viable candidates to deliver higher heat duties but still have a drawback of higher pressure drop due to long restricted flow path. Motivated by demand of miniaturization and cost reduction, a novel design of tubular microchannel heat exchanger for single phase flow employing ammonia water mixture is proposed. Numerical simulation of unit fluid domain is conducted in ANSYS Fluent. Parametric study of the different flow geometries is evaluated in terms of Nusselt number and pressure drop. The salient features of the design include ultra-compact size with higher heat transfer rate and acceptable pressure drop.
- 11 November 2016
- Published by ASME International
Numerical Simulation of Manifold Microchannel Heat Exchanger
The quest to achieve higher heat transfer rate, smaller size and minimum pressure drop is a main area of focus in the design of heat exchangers. Plate heat exchangers are one of viable candidates to deliver higher heat duties but still have a drawback of higher pressure drop due to long restricted flow path. Motivated by demand of miniaturization and cost reduction, a novel design of tubular microchannel heat exchanger for single phase flow employing ammonia water mixture is proposed. Numerical simulation of unit fluid domain is conducted in ANSYS Fluent. Parametric study of the different flow geometries is evaluated in terms of Nusselt number and pressure drop. The salient features of the design include ultra-compact size with higher heat transfer rate and acceptable pressure drop.
- 1 June 2016
- Published by Elsevier in Applied Thermal Engineering
- Vol. 103, 639-650
Geometric optimization for thermal–hydraulic performance of dimpled enhanced tubes for single phase flow
- 1 June 2016
- Published by Elsevier in Applied Thermal Engineering
- Vol. 103, 639-650
Geometric optimization for thermal–hydraulic performance of dimpled enhanced tubes for single phase flow
- 1 May 2016
- Published by Elsevier in Applied Thermal Engineering
- Vol. 101, 38-46
Single phase heat transfer and pressure drop analysis of a dimpled enhanced tube
- 1 May 2016
- Published by Elsevier in Applied Thermal Engineering
- Vol. 101, 38-46
Single phase heat transfer and pressure drop analysis of a dimpled enhanced tube