TMTimothy John Moroney

Timothy John Moroney

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Timothy John Moroney has a total of 63 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    A conical-reflector scintillation device for 3-dimensional measurement of radiotherapy beams: a feasibility study

    by Benjamin Broadhead, Scott Crowe, Tanya Kairn, Samuel Peet, Andrew Fielding, Timothy Moroney, Prabhakar Ramachandran, Jamie Trapp

    This study presents a novel optical dosimetry system designed to support three-dimensional characterisation of radiotherapy beams using a single-camera imaging geometry. The system combines a large-volume cylindrical plastic scintillator with a conical reflector, enabling scintillation light emitted during beam irradiation to be captured as both direct emission and secondary reflection arcs using a single camera. These reflected signals encode spatial information about the beam’s position, size, and intensity, forming the basis for extracting clinically relevant parameters such as beam geometry and intensity from a single 2D image. Controlled experiments using a 6 MV photon beam investigated the system’s response to changes in beam position, lateral width, and penumbra shape. Analysis of reflection arc geometry and intensity demonstrated strong linear correlations between beam position and arc radius over lateral and longitudinal shifts of up to 60 mm and 70 mm respectively, and a clear non-linear relationship between the average arc intensity and lateral beam field widths between 10 and 80 mm. Additionally, penumbra widths derived from reflection arc profiles were linearly proportional to those measured directly in the scintillator, with the arc penumbra approximately $$\:4.9\:\pm\:\:1.8$$ times wider than the underlying scintillator observed beam penumbra. This proof-of-concept study demonstrated that reflection arc geometry and intensity in a single 2D image provided sufficient information to infer spatial beam position, lateral field width, and penumbra characteristics for static irradiations. The simplicity, symmetry, and static design of the system support future development towards volumetric beam reconstruction and, through sequential image acquisition, potentially time-resolved treatment verification.

  • A review of one-phase Hele-Shaw flows and a level-set method for nonstandard configurations

    by Liam C. Morrow, Timothy J. Moroney, Michael C. Dallaston, Scott W. McCue

    The classical model for studying one-phase Hele-Shaw flows is based on a highly nonlinear moving boundary problem with the fluid velocity related to pressure gradients via a Darcy-type law. In a standard configuration with the Hele-Shaw cell made up of two flat stationary plates, the pressure is harmonic. Therefore, conformal mapping techniques and boundary integral methods can be readily applied to study the key interfacial dynamics, including the Saffman–Taylor instability and viscous fingering patterns. As well as providing a brief review of these key issues, we present a flexible numerical scheme for studying both the standard and nonstandard Hele-Shaw flows. Our method consists of using a modified finite-difference stencil in conjunction with the level-set method to solve the governing equation for pressure on complicated domains and track the location of the moving boundary. Simulations show that our method is capable of reproducing the distinctive morphological features of the Saffman–Taylor instability on a uniform computational grid. By making straightforward adjustments, we show how our scheme can easily be adapted to solve for a wide variety of nonstandard configurations, including cases where the gap between the plates is linearly tapered, the plates are separated in time, and the entire Hele-Shaw cell is rotated at a given angular velocity. doi:10.1017/S144618112100033X


  • Spectrogram analysis of surface elevation signals due to accelerating ships

    by Ravindra Pethiyagoda, Timothy J. Moroney, Gregor J. Macfarlane, Scott W. McCue

    Spectrograms provide an efficient way to analyze surface elevation signals of ship waves taken from a sensor fixed at a single point in space. Recent work based on a simplified model for the ship's disturbance suggests that matching the spectrogram heat-map patterns to a so-called dispersion curve has the potential for estimating of properties of a steadily moving ship, such as the ship's speed and closest distance to the sensor. Here we extend the theory behind the dispersion curve so that it can be applied to ships accelerating along arbitrary paths and demonstrate how acceleration affects the structure of the associated spectrograms. Examples are provided for a simple model of a ship accelerating/decelerating in a straight line or traveling in a circle with constant angular speed. We highlight a problem with nonuniqueness of the dispersion curve when comparing ships moving along different paths. Finally, we validate the new dispersion curve against experimental results of ship models accelerating in a finite depth basin. Our work will provide a basis for more comprehensive studies that extend the simplified model to take into account the shape of the hull in question.


  • Open Access

    Spectrogram analysis of surface elevation signals due to accelerating ships

    by Ravindra Pethiyagoda, Timothy J Moroney, Gregor J Macfarlane, Scott W McCue

    Spectrograms provide an efficient way to analyse surface elevation signals of ship waves taken from a sensor fixed at a single point in space. Recent work based on a simplified model for the ship's disturbance suggests that matching the spectrogram heat-map patterns to a so-called dispersion curve has the potential for estimating of properties of a steadily moving ship, such as the ship's speed and closest distance to the sensor. Here we extend the theory behind the dispersion curve so that it can be applied to ships accelerating along arbitrary paths and demonstrate how acceleration affects the structure of the associated spectrograms. Examples are provided for of a simple model of a ship accelerating/decelerating in a straight line or travelling in a circle with constant angular speed. We highlight a problem with non-uniqueness of the dispersion curve when comparing ships moving along different paths. Finally, we validate the new dispersion curve against experimental results of ship models accelerating in a finite depth basin. Our work will provide a basis for more comprehensive studies that extend the simplified model to take into account the shape of the hull in question.

  • A REVIEW OF ONE-PHASE HELE-SHAW FLOWS AND A LEVEL-SET METHOD FOR NONSTANDARD CONFIGURATIONS

    by Liam C. Morrow, Timothy J. Moroney, Michael C. Dallaston, Scott W. Mccue

    The classical model for studying one-phase Hele-Shaw flows is based on a highly nonlinear moving boundary problem with the fluid velocity related to pressure gradients via a Darcy-type law. In a standard configuration with the Hele-Shaw cell made up of two flat stationary plates, the pressure is harmonic. Therefore, conformal mapping techniques and boundary integral methods can be readily applied to study the key interfacial dynamics, including the Saffman–Taylor instability and viscous fingering patterns. As well as providing a brief review of these key issues, we present a flexible numerical scheme for studying both the standard and nonstandard Hele-Shaw flows. Our method consists of using a modified finite-difference stencil in conjunction with the level-set method to solve the governing equation for pressure on complicated domains and track the location of the moving boundary. Simulations show that our method is capable of reproducing the distinctive morphological features of the Saffman–Taylor instability on a uniform computational grid. By making straightforward adjustments, we show how our scheme can easily be adapted to solve for a wide variety of nonstandard configurations, including cases where the gap between the plates is linearly tapered, the plates are separated in time, and the entire Hele-Shaw cell is rotated at a given angular velocity.


  • Open Access

    Implicit reconstructions of thin leaf surfaces from large, noisy point clouds

    by Riley M. Whebell, Timothy J. Moroney, Ian W. Turner, Ravindra Pethiyagoda, Scott W. McCue

    Thin surfaces, such as the leaves of a plant, pose a significant challenge for implicit surface reconstruction techniques, which typically assume a closed, orientable surface. We show that by approximately interpolating a point cloud of the surface (augmented with off-surface points) and restricting the evaluation of the interpolant to a tight domain around the point cloud, we need only require an orientable surface for the reconstruction. We use polyharmonic smoothing splines to fit approximate interpolants to noisy data, and a partition of unity method with an octree-like strategy for choosing subdomains. This method enables us to interpolate an N-point dataset in O(N) operations. We present results for point clouds of capsicum and tomato plants, scanned with a handheld device. An important outcome of the work is that sufficiently smooth leaf surfaces are generated that are amenable for droplet spreading simulations.

  • Kelvin wake pattern at small Froude numbers

    by Ravindra Pethiyagoda, Timothy J. Moroney, Christopher J. Lustri, Scott W. McCue

    The surface gravity wave pattern that forms behind a steadily moving disturbance is well known to comprise divergent waves and transverse waves, contained within a distinctive -shaped wake. In this paper, we are concerned with a theoretical study of the limit of a slow-moving disturbance (small Froude numbers) in the absence of surface tension, for which the wake is dominated by transverse waves. Three configurations are considered: flow past a submerged source singularity, a submerged doublet and a pressure distribution applied to the surface. We treat the linearised version of these problems and use the method of stationary phase and exponential asymptotics to demonstrate that the apparent wake angle is less than the classical Kelvin angle and to quantify the decrease in apparent wake angle as the Froude number decreases. These results complement a number of recent studies for sufficiently fast-moving disturbances (large Froude numbers) where the apparent wake angle has been also shown to be less than the classical Kelvin angle. As well as shedding light on the issue of apparent wake angle, we also study the fully nonlinear problems for our three configurations under various limits to demonstrate the unique and interesting features of Kelvin wake patterns at small Froude numbers.


  • Hole-closing model reveals exponents for nonlinear degenerate diffusivity functions in cell biology

    by Scott W. McCue, Wang Jin, Timothy J. Moroney, Kai-Yin Lo, Shih-En Chou, Matthew J. Simpson


  • Numerical investigation of controlling interfacial instabilities in non-standard Hele-Shaw configurations

    by Liam C. Morrow, Timothy J. Moroney, Scott W. McCue

    Viscous fingering experiments in Hele-Shaw cells lead to striking pattern formations which have been the subject of intense focus among the physics and applied mathematics community for many years. In recent times, much attention has been devoted to devising strategies for controlling such patterns and reducing the growth of the interfacial fingers. We continue this research by reporting on numerical simulations, based on the level set method, of a generalised Hele-Shaw model for which the geometry of the Hele-Shaw cell is altered. First, we investigate how imposing constant and time-dependent injection rates in a Hele-Shaw cell that is either standard, tapered or rotating can be used to reduce the development of viscous fingering when an inviscid fluid is injected into a viscous fluid over a finite time period. We perform a series of numerical experiments comparing the effectiveness of each strategy to determine how these non-standard Hele-Shaw configurations influence the morphological features of the inviscid–viscous fluid interface. Surprisingly, a converging or diverging taper of the plates leads to reduced metrics of viscous fingering at the final time when compared to the standard parallel configuration, especially with carefully chosen injection rates; for the rotating plate case, the effect is even more dramatic, with sufficiently large rotation rates completely stabilising the interface. Next, we illustrate how the number of non-splitting fingers can be controlled by injecting the inviscid fluid at a time-dependent rate while increasing the gap between the plates. Our simulations compare well with previous experimental results for various injection rates and geometric configurations. We demonstrate how the number of non-splitting fingers agrees with that predicted from linear stability theory up to some finger number; for larger values of our control parameter, the fully nonlinear dynamics of the problem leads to slightly fewer fingers than this linear prediction.


  • Moving Boundary Problems for Quasi-Steady Conduction Limited Melting

    by Liam C. Morrow, John R. King, Timothy J. Moroney, Scott W. McCue

    The problem of melting a crystal dendrite is modeled as a quasi-steady Stefan problem. By employing the Baiocchi transform, asymptotic results are derived in the limit that the crystal melts comple...