AWAtom O. Watanabe

Atom O. Watanabe

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Atom O. Watanabe has a total of 47 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • High-density low-loss millimeter-wave package interconnects with the impact of dielectric-material surface roughness

    by Atom O. Watanabe, Kimiyuki Kanno, Hirokazu Ito, Rao R. Tummala, Madhavan Swaminathan

    Heterogeneous package integration and chiplet approaches are the key technology to enable next-generation high performance small form-factor packages for emerging applications. Millimeter-wave packaging for fifth-generation and upcoming sixth-generation platforms also need to meet the high-density low signal-loss interconnect specifications utilizing advanced conductor and dielectric materials. This article presents the comparison of the liquid-based photoimageable dielectric (PID) and dry-film dielectric materials in terms of interconnect path losses that are critical in mm-wave frequency bands. The conductor loss being more dominant in the frequency bands and in thinner dielectric structures, we assess daisy chains and microstrip lines on 15-μm dielectric by measuring the S-parameters to quantify the impact of the surface roughness at around 28 GHz. Measured results from the daisy chain and microstrip line structures exhibit that the smooth surface of the liquid-based PID (3 nm) leads to 8%–32% lower signal loss in the dB scale than the 325-nm rough dry-film dielectric. The study provides comprehensive experimental results that the different material forms with various surface roughness largely impact the package-level interconnect loss.


  • Measurement and Analysis of Through Glass Via Noise Coupling and Shielding Structures in a Glass Interposer

    by Gapyeol Park, Youngwoo Kim, Kyungjun Cho, Junyong Park, Insu Hwang, Jihye Kim, Kyungjune Son, Hyunwook Park, Atom O. Watanabe, Pulugurtha Markondeya Raj, et al.

    In this article, we first measured through glass via (TGV) noise coupling and the effectiveness of shielding structures in a glass interposer. To analyze the noise coupling between signal TGVs, an open-ended structure is adopted. Glass interposer test vehicles were fabricated to verify the noise coupling between signal TGVs. With these test vehicles, noise transfer functions between signal TGVs were measured. Based on these measurement results and the equivalent circuit model, the noise coupling between signal TGVs was analyzed. To suppress this TGV noise coupling, shielding structures for the TGV noise coupling were proposed and verified. The proposed shielding structures include the variation of signal TGV pitches and the number of grounded shield TGVs, ground pads, and guard rings, respectively. The effectiveness of the proposed shielding structures was verified up to 20 GHz in frequency-domain measurements. Using the proposed shielding structures, the noise transfer function decreased by 9.4 dB at 5 GHz. Also, the effectiveness of the proposed guard ring structure was verified by a time-domain coupling noise simulation with clock signals at frequencies of 1 GHz. The proposed guard ring successfully suppressed the clock noise coupling between signal TGVs by 60.5% and 69.2% when a signal TGV pitchis 300 and 900 $\mu {\text{m}}$ , respectively.


  • Characterization of ABF/Glass/ABF Substrates for mmWave Applications

    by Mutee Ur Rehman, Siddharth Ravichandran, Atom O. Watanabe, Serhat Erdogan, Madhavan Swaminathan

    Glass-based packaging presents unique opportunities for supporting 5G and beyond frequencies. In this work, we present the first broadband characterization results for the electrical properties of Ajinomoto build-up film (ABF) laminated on glass substrates. ABF/glass/ABF-based stack up has been characterized from 20 to 170 GHz. We also report the low-loss performance of ABF/glass/ABF transmission lines. The material stack up consists of a 100- μm-thick EN-A1 glass core from Asahi Glass Company (AGC) with 15- μm ABF GL102 laminated on both sides. Semiadditive process (SAP) has been used to metalize the stack up. A microstrip ring resonator (MRR) method has been used to extract the dielectric constant and loss tangent of the stack up. The dispersive model estimates the dielectric constant of the stack up to be ~4.72 for the entire frequency range with a variance of +0.1. The measured loss tangent values were 0.004, 0.009, and 0.012 at 23, 103, and 140 GHz, respectively. The electrical characterization results with a confidence interval of 95% have been reported. The average insertion loss for coplanar waveguide (CPW) lines in the frequency range was measured to be between 0.055 and 0.50 dB/mm. The average insertion loss for microstrip in the same frequency range was measured to be 0.12-0.62 dB/mm. Along with the good model to hardware correlation, the performance of the transmission lines has been compared with the insertion loss published for other substrate technologies.


  • Top Cited Papers

    A Review of 5G Front-End Systems Package Integration

    by Atom O. Watanabe, Muhammad Ali, Sk Yeahia Been Sayeed, Rao R. Tummala, Markondeya Raj Pulugurtha

    Increasing data rates, spectrum efficiency and energy efficiency have been driving major advances in the design and hardware integration of RF communication networks. In order to meet the data rate and efficiency metrics, 5G networks have emerged as a follow-on to 4G, and projected to have 100X higher wireless date rates and 100X lower latency than those with current 4G networks. Major challenges arise in the packaging of radio-frequency front-end modules because of the stringent low signal-loss requirements in the millimeter-wave frequency bands, and precision-impedance designs with smaller footprints and thickness. Heterogeneous integration in 3D ultra-thin packages with higher component densities and performance than with the existing 2D packages is needed to realize such 5G systems. This paper reviews the key building blocks of 5G systems and the underlying advances in packaging technologies to realize them.


  • Ultrathin Antenna-Integrated Glass-Based Millimeter-Wave Package With Through-Glass Vias

    by Atom O. Watanabe, Tong-Hong Lin, Muhammad Ali, Yiteng Wang, Vanessa Smet, Pulugurtha Markondeya Raj, Manos M. Tentzeris, Rao R. Tummala, Madhavan Swaminathan

    This article presents the design and demonstration of a high-bandwidth antenna-in-package (AiP) module focusing on low-loss interconnects and Yagi-Uda antenna performance fabricated on a 100-μm low coefficient-of-thermal-expansion (CTE) glass for the 28-GHz band. It shows the modeling, design, and characterization of key technology building blocks along with the process development of advanced 3-D glass packages. The building blocks include impedance-matched antenna-to-die signal transitions, Yagi-Uda antenna, and 3-D active-passive integration with backside die assembly on 100-μm glass substrates. The design and stack-up optimization of antenna-integrated millimeter-wave (mm-wave) modules is discussed. Process development to achieve high-density interconnects and precise dimensional control in multilayered thin glass-based packages is also described. The characterization results of the key technology building blocks show an insertion loss of 0.021 dB per through-package via (TPV), leading to the whole-chain loss of less than 1 dB and a return loss lower than 20 dB. The fabricated Yagi-Uda antenna features high repeatability of wide bandwidth due to the process control enabled by glass substrates. The antenna measurements show a bandwidth of 28.2%, which covers the entire 28-GHz fifth-generation (5G) frequency bands (n257, n258, and n261). The flip-chip assembled low-noise amplifier with 80-μm solder balls shows a maximum gain of 20 dB as desired. The performance of the glass-based package integrated antennas is benchmarked to other 5G substrate technologies, such as organic laminates or co-fired ceramic-based substrates.


  • Sintered Nanocopper Paste for High-Performance 3D Heterogeneous Package Integration

    by Yiteng Wang, Atom O. Watanabe, Nobuo Ogura, Pulugurtha Markondeya Raj, Rao Tummala


  • Broadband and Miniaturized Antenna-in-Package (AiP) Design for 5G Applications

    by Tong-Hong Lin, Kimiyuki Kanno, Atom O. Watanabe, Pulugurtha Markondeya Raj, Rao R. Tummala, Madhavan Swaminathan, Manos M. Tentzeris

    A broadband and miniaturized planar Yagi AiP design for the fifth-generation (5G) wireless communication is proposed. The monopole taper radiator is adopted for the proposed Yagi antenna design to miniaturize the size, extend the bandwidth, and simplify the feeding network. The proposed AiP design is broadband enough to cover all three 5G New Radio bands simultaneously. The high-precision high-resolution multi-layered glass packaging fabrication process with a new low-loss polymer material coating is adopted to realize the circuit. The operation band is from 24.25 GHz to 40 GHz and the fractional bandwidth is 49%. The overall size for an antenna element is 3.05 mm 5.56 mm which is equal to $0.25_0 0.45_0$ . The measured S11 is smaller than -10 dB within the entire band and the gain is larger than 4 dBi. A 2-by-1 array using the proposed element is also demonstrated with a gain higher than 6.2 dBi within the entire band. Compared with previous works, the proposed AiP design can cover all 5G bands with a competitive size. Thus, it is suitable to be applied to massive arrays and easily integrated into packages to achieve compact system-in-package (SiP) applications while resolving numerous current 5G challenges.


  • Package-Integrated, Wideband Power Dividing Networks and Antenna Arrays for 28-GHz 5G New Radio Bands

    by Muhammad Ali, Atom O. Watanabe, Tong-Hong Lin, Daichi Okamoto, Markondeya Raj Pulugurtha, Manos M. Tentzeris, Rao R. Tummala

    Package-integrated and ultra-thin power dividers with footprint smaller than unit λ02 at the operating frequency of 28 GHz 5G new radio (NR) n257 and n258 bands are presented for the first time for small-cell applications. These power dividers are also configured as antenna arrays using end-fire Yagi-Uda antenna elements. Utilizing minimal matching techniques, two, three and four-element antenna arrays are designed without compromising on the bandwidth of operation or electrical performance. These thin-film power dividers exhibit a cross-sectional height of 147-μm and can be implemented in the top metal layer of front-end module packages. Panel-compatible semi-additive patterning (SAP) process is utilized to realize these structures which yields precise linespace dimensions required for millimeter-wave applications. This results in power dividers with low added insertion loss, low VSWR and minimal phase difference between output ports. The added-insertion loss is 25% less than similar structures reported on integrated fanout architectures. The antenna arrays exhibit high gain and efficiency. Excellent model-to-hardware correlation is observed with multiple coupons of the same structure. Package-integrated power dividers and antenna arrays based on ultra-thin laminated glass substrate represents a major step towards realizing compact mm-wave antenna-in-package for 5G small-cell applications.


  • Heterogeneous Integration of 5G and Millimeter-Wave Diplexers with 3D Glass Substrates

    by Muhammad Ali, Atom Watanabe, Takenori Kakutani, Pulugurtha M. Raj, Rao. R. Tummala, Madhavan Swaminathan

    Package-integrated implementation of highly- miniaturized diplexers is presented for the first time on ultra-thin laminated glass substrates for millimeter-wave (mm-wave) applications in emerging RF front-end modules (FEM). The diplexers are designed using miniaturized, doubly- terminated bandpass filters which cover the 5G new radio (NR) mm-wave bands: n257, n258 and n260. Two different types of filters: hairpin and edge-coupled are modeled, designed and optimized for this non-contiguous diplexer demonstration. Since diplexer is a three-port device, the considerations for optimum RF performance as well as characterization are included in the modeling phase. From the fabrication standpoint, unlike conventional etching processes, panel-scale semi-additive patterning (SAP) process is utilized to form high-precision, fine-feature redistribution layers (RDL) on ultra-thin glass substrates to accurately realize the aforementioned passive components. These diplexers can be integrated with antennas on the top layer of a multilayered 5G module or they can be utilized as integrated passive devices (IPDs). An appropriately sized ground plane is sufficient to isolate the rest of the system from these diplexers, making them ideal for applications such as heterogeneously-integrated packages. The demonstrated diplexers, comprising of 5G NR band filters, exhibit low insertion loss, high stopband rejection, high selectivity, ease-of-integration in packages as well as small footprint. The simulated response of the fabricated diplexers is in excellent agreement with the measured results.


  • Advanced Low Loss Dielectric Material Reliability and Filter Characteristics at High Frequency for mmWave Applications

    by Takenori Kakutani, Daichi Okamoto, Zhong Guan, Yuya Suzuki, Muhammad Ali, Atom Watanabe, Mohanalingam Kathaperumal, Madhavan Swaminathan

    In this paper, we report an advanced low-loss dry film build-up material applicable to high-frequency transmission, and evaluation of filter characteristics and dielectric characteristics in the mmWave band. The wireless communication standard is evolving from 5G to beyond 5G, and accordingly, it is critical to lower the loss tangent (Df) of build-up materials to enable high-speed transmission in signal paths. However, for high frequency filter applications, conventional materials such as epoxy and polyimide type build-up materials induce high insertion loss in the passband. This paper therefore introduces a lower-Df dry film build-up material (Material A) and investigates transmission characteristics of the same. To evaluate the insulation reliability and electrical performance of the material, test vehicles with precise copper patterns are designed and fabricated with a semi-additive patterning process (SAP) using the Material A. Each test board was fabricated to evaluate the insulation reliability and electrical performance of the material. By applying the Material A for SAP, over 5N/cm high peeling strength is achieved despite of the smooth surface. The material demonstrates an excellent insulation reliability between copper lines and between copper layers, specifically 300 hours of bHAST attributed to its low chlorine impurities. The dielectric property Df of the material is 0.0025 at 10 GHz. The electrical performance of lowpass filters and bandpass filters are measured by electrical analysis using microwave network analyzers system. These test boards demonstrate to achieve a low transmission loss of less than 1 dB at 28 GHz as a lowpass filter, and 1.05 dB at 28 GHz and 1.18 dB at 39 GHz as a bandpass filter. As a result of this excellent low transmission loss, this material has promising application potential for millimeter wave applications.