Frank Niemeyer
Research Subjects
Frank Niemeyer has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Felix Erne
Siegfried Weller Research Institute, BG Unfallklinik, Department of Trauma and Reconstructive Surgery, Eberhard Karls University Tuebingen, Schnarrenbergstr. 95, 72076 Tuebingen, Germany
2 shared publications - Lucas Engelhardt
Project Team OSORA—Medical Fracture Analytics, Ulm University, Helmholtzstr. 20, 89081 Ulm, Germany
2 shared publications - Marie K. Reumann
Department for Trauma and Reconstructive Surgery, Eberhard Karls University Tuebingen, BG Klinik Tuebingen, Schnarrenbergstr. 95, 72076 Tuebingen, Germany
2 shared publications Anita Ignatius
Institute for Orthopaedic Research and Biomechanics, Centre for Trauma Research, University Hospital Ulm, Ulm, Germany
1 shared publication- Anita Ignatius
Institute of Orthopedic Research and Biomechanics, Ulm University Medical Center, Germany
1 shared publication Annette Kienle
SpineServ GmbH & Co. KG
1 shared publication
Latest Publications
- Open Access
- 15 April 2025
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 14 (8) , 2713
The Power of Heuristics in Predicting Fracture Nonunion
Background/Objectives: Although extensive research on risk factors for nonunion development has been published, clinicians frequently rely on heuristic reasoning—intuitive, experience-based decision-making—to predict nonunions. However, the accuracy of these intuitive assessments and the influence of clinician experience remain uncertain. This study aims to assess clinicians’ diagnostic accuracy in predicting nonunion, investigate the impact of experience on predictive performance, and identify patient-specific factors contributing to diagnostic errors. Methods: This retrospective, multi-center cohort study included 98 patients with surgically treated tibial shaft fractures between 2018 and 2023 from four level-one trauma centers in Germany. Fracture outcomes were classified as either nonunion (n = 20) or regular fracture healing (n = 78). Patient cases were presented to 24 clinicians. Each clinician independently assessed preoperative and postoperative biplanar X-rays and patient histories to predict fracture healing. Results: Clinicians’ sensitivity significantly improved from 50.4% to 60.2%, while specificity declined (74.0% to 70.7%) with the addition of postoperative information. No significant differences in predictive performance were observed across different levels of clinician experience. Changes in assessment after reviewing postoperative information were equally likely to be beneficial or detrimental. Certain patient factors, including obesity and smoking, influenced prediction errors. Conclusions: This study is the first to assess heuristic reasoning in nonunion prediction. The findings suggest that clinician experience does not significantly enhance diagnostic accuracy under limited-information conditions. Patients should be informed that predicting individual nonunion risk remains challenging. Larger studies are needed to explore the role of patient-specific factors and refine clinical decision-making in fracture healing prognosis.
- 15 April 2025
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 14 (8) , 2713
Open AccessThe Power of Heuristics in Predicting Fracture Nonunion
Background/Objectives: Although extensive research on risk factors for nonunion development has been published, clinicians frequently rely on heuristic reasoning—intuitive, experience-based decision-making—to predict nonunions. However, the accuracy of these intuitive assessments and the influence of clinician experience remain uncertain. This study aims to assess clinicians’ diagnostic accuracy in predicting nonunion, investigate the impact of experience on predictive performance, and identify patient-specific factors contributing to diagnostic errors. Methods: This retrospective, multi-center cohort study included 98 patients with surgically treated tibial shaft fractures between 2018 and 2023 from four level-one trauma centers in Germany. Fracture outcomes were classified as either nonunion (n = 20) or regular fracture healing (n = 78). Patient cases were presented to 24 clinicians. Each clinician independently assessed preoperative and postoperative biplanar X-rays and patient histories to predict fracture healing. Results: Clinicians’ sensitivity significantly improved from 50.4% to 60.2%, while specificity declined (74.0% to 70.7%) with the addition of postoperative information. No significant differences in predictive performance were observed across different levels of clinician experience. Changes in assessment after reviewing postoperative information were equally likely to be beneficial or detrimental. Certain patient factors, including obesity and smoking, influenced prediction errors. Conclusions: This study is the first to assess heuristic reasoning in nonunion prediction. The findings suggest that clinician experience does not significantly enhance diagnostic accuracy under limited-information conditions. Patients should be informed that predicting individual nonunion risk remains challenging. Larger studies are needed to explore the role of patient-specific factors and refine clinical decision-making in fracture healing prognosis.
- Open Access
- 4 July 2024
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 13 (13) , 3922
Case Studies of a Simulation Workflow to Improve Bone Healing Assessment in Impending Non-Unions
Background: The healing potential of a fracture is determined by mechanical and biological factors. Simulation-based workflows can help assess these factors to assist in predicting non-unions. The aim of this study was the introduction of two use cases for a novel patient-specific simulation workflow based on clinically available information. Methods: The used software is an extension of the “Ulm Bone Healing model” and was applied in two cases with non-union development after fracture fixation to show its principal feasibility. The clinical and radiographic information, starting from initial treatment, were used to feed the simulation process. Results: The simulation predicted non-union development and axial deviation in a mechanically driven non-union. In the case of a biological non-union, a slow, incomplete healing course was correctly identified. However, the time offset in callus bridging was discordant between the simulation and the distinctly slower healing response in the clinical case. Conclusions: The simulation workflow presented in the two clinical use cases allowed for the identification of fractures at risk for impending non-union immediately after the initial fixation based on available clinical and radiographic information. Further validation in a large non-union cohort is needed to increase the model’s precision, especially in biologically challenging cases, and show its validity as a screening instrument.
- 4 July 2024
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 13 (13) , 3922
Open AccessCase Studies of a Simulation Workflow to Improve Bone Healing Assessment in Impending Non-Unions
Background: The healing potential of a fracture is determined by mechanical and biological factors. Simulation-based workflows can help assess these factors to assist in predicting non-unions. The aim of this study was the introduction of two use cases for a novel patient-specific simulation workflow based on clinically available information. Methods: The used software is an extension of the “Ulm Bone Healing model” and was applied in two cases with non-union development after fracture fixation to show its principal feasibility. The clinical and radiographic information, starting from initial treatment, were used to feed the simulation process. Results: The simulation predicted non-union development and axial deviation in a mechanically driven non-union. In the case of a biological non-union, a slow, incomplete healing course was correctly identified. However, the time offset in callus bridging was discordant between the simulation and the distinctly slower healing response in the clinical case. Conclusions: The simulation workflow presented in the two clinical use cases allowed for the identification of fractures at risk for impending non-union immediately after the initial fixation based on available clinical and radiographic information. Further validation in a large non-union cohort is needed to increase the model’s precision, especially in biologically challenging cases, and show its validity as a screening instrument.
- Open Access
- 14 May 2023
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 12 (10) , 3461
Computer-Based Mechanobiological Fracture Healing Model Predicts Non-Union of Surgically Treated Diaphyseal Femur Fractures
As non-unions are still common, a predictive assessment of healing complications could enable immediate intervention before negative impacts for the patient occur. The aim of this pilot study was to predict consolidation with the help of a numerical simulation model. A total of 32 simulations of patients with closed diaphyseal femoral shaft fractures treated by intramedullary nailing (PFNA long, FRN, LFN, and DePuy Synthes) were performed by creating 3D volume models based on biplanar postoperative radiographs. An established fracture healing model, which describes the changes in tissue distribution at the fracture site, was used to predict the individual healing process based on the surgical treatment performed and full weight bearing. The assumed consolidation as well as the bridging dates were retrospectively correlated with the clinical and radiological healing processes. The simulation correctly predicted 23 uncomplicated healing fractures. Three patients showed healing potential according to the simulation, but clinically turned out to be non-unions. Four out of six non-unions were correctly detected as non-unions by the simulation, and two simulations were wrongfully diagnosed as non-unions. Further adjustments of the simulation algorithm for human fracture healing and a larger cohort are necessary. However, these first results show a promising approach towards an individualized prognosis of fracture healing based on biomechanical factors.
- 14 May 2023
- Published by MDPI AG in Journal of Clinical Medicine
- Vol. 12 (10) , 3461
Open AccessComputer-Based Mechanobiological Fracture Healing Model Predicts Non-Union of Surgically Treated Diaphyseal Femur Fractures
As non-unions are still common, a predictive assessment of healing complications could enable immediate intervention before negative impacts for the patient occur. The aim of this pilot study was to predict consolidation with the help of a numerical simulation model. A total of 32 simulations of patients with closed diaphyseal femoral shaft fractures treated by intramedullary nailing (PFNA long, FRN, LFN, and DePuy Synthes) were performed by creating 3D volume models based on biplanar postoperative radiographs. An established fracture healing model, which describes the changes in tissue distribution at the fracture site, was used to predict the individual healing process based on the surgical treatment performed and full weight bearing. The assumed consolidation as well as the bridging dates were retrospectively correlated with the clinical and radiological healing processes. The simulation correctly predicted 23 uncomplicated healing fractures. Three patients showed healing potential according to the simulation, but clinically turned out to be non-unions. Four out of six non-unions were correctly detected as non-unions by the simulation, and two simulations were wrongfully diagnosed as non-unions. Further adjustments of the simulation algorithm for human fracture healing and a larger cohort are necessary. However, these first results show a promising approach towards an individualized prognosis of fracture healing based on biomechanical factors.
- Open Access
- 25 February 2021
- Published by MDPI AG in Biomechanics
- Vol. 1 (1) , 29-42
Simulating Metaphyseal Fracture Healing in the Distal Radius
Simulating diaphyseal fracture healing via numerical models has been investigated for a long time. It is apparent from in vivo studies that metaphyseal fracture healing should follow similar biomechanical rules although the speed and healing pattern might differ. To investigate this hypothesis, a pre-existing, well-established diaphyseal fracture healing model was extended to study metaphyseal bone healing. Clinical data of distal radius fractures were compared to corresponding geometrically patient-specific fracture healing simulations. The numerical model, was able to predict a realistic fracture healing process in a wide variety of radius geometries. Endochondral and mainly intramembranous ossification was predicted in the fractured area without callus formation. The model, therefore, appears appropriate to study metaphyseal bone healing under differing mechanical conditions and metaphyseal fractures in different bones and fracture types. Nevertheless, the outlined model was conducted in a simplified rotational symmetric case. Further studies may extend the model to a three-dimensional representation to investigate complex fracture shapes. This will help to optimize clinical treatments of radial fractures, medical implant design and foster biomechanical research in metaphyseal fracture healing.
- 25 February 2021
- Published by MDPI AG in Biomechanics
- Vol. 1 (1) , 29-42
Open AccessSimulating Metaphyseal Fracture Healing in the Distal Radius
Simulating diaphyseal fracture healing via numerical models has been investigated for a long time. It is apparent from in vivo studies that metaphyseal fracture healing should follow similar biomechanical rules although the speed and healing pattern might differ. To investigate this hypothesis, a pre-existing, well-established diaphyseal fracture healing model was extended to study metaphyseal bone healing. Clinical data of distal radius fractures were compared to corresponding geometrically patient-specific fracture healing simulations. The numerical model, was able to predict a realistic fracture healing process in a wide variety of radius geometries. Endochondral and mainly intramembranous ossification was predicted in the fractured area without callus formation. The model, therefore, appears appropriate to study metaphyseal bone healing under differing mechanical conditions and metaphyseal fractures in different bones and fracture types. Nevertheless, the outlined model was conducted in a simplified rotational symmetric case. Further studies may extend the model to a three-dimensional representation to investigate complex fracture shapes. This will help to optimize clinical treatments of radial fractures, medical implant design and foster biomechanical research in metaphyseal fracture healing.
- 16 July 2020
- Published by Wolters Kluwer Health in Investigative Radiology
- Vol. 56 (2) , 78-85
A Deep Learning Model for the Accurate and Reliable Classification of Disc Degeneration Based on MRI Data
Objectives: Although magnetic resonance imaging–based formalized grading schemes for intervertebral disc degeneration offer improved reproducibility compared with purely subjective ratings, their intrarater and interrater reliability are not nearly good enough to be able to detect small to medium effects in clinical longitudinal studies. The aim of this study thus was to develop a method that enables automatic and therefore reproducible and reliable evaluation of disc degeneration based on conventional clinical image data and Pfirrmann's grading scheme. Materials and Methods: We propose a classifier based on a deep convolutional neural network that we trained on a large, manually evaluated data set of 1599 patients (7948 intervertebral discs). To improve upon the status quo, we focused on the quality of the training data and performed extensive hyperparameter optimization. We assessed the potential benefits of optimizing loss functions beyond common cross-entropy loss, such as soft kappa loss, ordinal cross-entropy loss, or regression losses. We furthermore experimented with ways to mitigate class imbalance by pooling classes or using class-weighted loss functions. During model development and hyperparameter optimization, we used a fixed 90%/10% training/validation set split. To estimate real-world prediction performance, we performed 10-fold cross-validation. Results: The evaluated image data results in a Gaussian degeneration grade distribution, and thus grades 1 and 5 are slightly underrepresented in the training set. Our default cross-entropy–based classifier achieves a reliability of κ = 0.92 (Cohen κ), an average sensitivity of 90.2%, and an average precision of 92.5%. In 99.2% of validation cases, the network's prediction deviates at most 1 Pfirrmann grades from the ground truth. Framed as an ordinal regression problem, the mean absolute error between the ground truth and the prediction is 0.08 Pfirrmann grade with a correlation of r = 0.96. The results of the 10-fold cross validation confirm those performance estimates, indicating no substantial overfitting. More sophisticated loss functions, class-based loss weighting, or class pooling did not lead to improved classification performance overall. Conclusions: With a reliability of κ > 0.9, our system clearly outperforms average human interrater as well as intrarater reliability. With an average sensitivity of more than 90%, our classifier also surpasses state-of-the-art machine learning solutions for automatically grading disc degeneration.
- 16 July 2020
- Published by Wolters Kluwer Health in Investigative Radiology
- Vol. 56 (2) , 78-85
A Deep Learning Model for the Accurate and Reliable Classification of Disc Degeneration Based on MRI Data
Objectives: Although magnetic resonance imaging–based formalized grading schemes for intervertebral disc degeneration offer improved reproducibility compared with purely subjective ratings, their intrarater and interrater reliability are not nearly good enough to be able to detect small to medium effects in clinical longitudinal studies. The aim of this study thus was to develop a method that enables automatic and therefore reproducible and reliable evaluation of disc degeneration based on conventional clinical image data and Pfirrmann's grading scheme. Materials and Methods: We propose a classifier based on a deep convolutional neural network that we trained on a large, manually evaluated data set of 1599 patients (7948 intervertebral discs). To improve upon the status quo, we focused on the quality of the training data and performed extensive hyperparameter optimization. We assessed the potential benefits of optimizing loss functions beyond common cross-entropy loss, such as soft kappa loss, ordinal cross-entropy loss, or regression losses. We furthermore experimented with ways to mitigate class imbalance by pooling classes or using class-weighted loss functions. During model development and hyperparameter optimization, we used a fixed 90%/10% training/validation set split. To estimate real-world prediction performance, we performed 10-fold cross-validation. Results: The evaluated image data results in a Gaussian degeneration grade distribution, and thus grades 1 and 5 are slightly underrepresented in the training set. Our default cross-entropy–based classifier achieves a reliability of κ = 0.92 (Cohen κ), an average sensitivity of 90.2%, and an average precision of 92.5%. In 99.2% of validation cases, the network's prediction deviates at most 1 Pfirrmann grades from the ground truth. Framed as an ordinal regression problem, the mean absolute error between the ground truth and the prediction is 0.08 Pfirrmann grade with a correlation of r = 0.96. The results of the 10-fold cross validation confirm those performance estimates, indicating no substantial overfitting. More sophisticated loss functions, class-based loss weighting, or class pooling did not lead to improved classification performance overall. Conclusions: With a reliability of κ > 0.9, our system clearly outperforms average human interrater as well as intrarater reliability. With an average sensitivity of more than 90%, our classifier also surpasses state-of-the-art machine learning solutions for automatically grading disc degeneration.
- Open Access
- 15 March 2018
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 13 (3) , e0194500
Simulating lateral distraction osteogenesis
Distraction osteogenesis is an effective method for generating large amounts of bone in situ for treating pathologies such as large bone defects or skeletal malformations, for instance leg-length discrepancies. While an optimized distraction procedure might have the potential to reduce the rate of complications significantly, our knowledge of the underlying mechanobiological processes is still insufficient for systematic optimization of treatment parameters such as distraction rate or fixation stiffness. We present a novel numerical model of lateral distraction osteogenesis, based on a mechanically well-controlled in vivo experiment. This model extends an existing numerical model of callus healing with viscoplastic material properties for describing stress relaxation and stimuli history-dependent tissue differentiation, incorporating delay and memory effects. A reformulation of appositional growth based non-local biological stimuli in terms of spatial convolution as well as remeshing and solution-mapping procedures allow the model to cope with severe mesh distortions associated with large plastic deformations. With these enhancements, our model is capable of replicating the in vivo observations for lateral distraction osteogenesis in sheep using the same differentiation rules and the same set of parameters that successfully describes callus healing in sheep, indicating that tissue differentiation hypotheses originally developed for fracture healing scenarios might indeed be applicable to distraction as well. The response of the model to modified distraction parameters corresponds to existing studies, although the currently available data is insufficient for rigorous validation. As such, this study provides a first step towards developing models that can serve as tools for identifying both interesting research questions and, eventually, even optimizing clinical procedures once better data for calibration and validation becomes available.
- 15 March 2018
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 13 (3) , e0194500
Open AccessSimulating lateral distraction osteogenesis
Distraction osteogenesis is an effective method for generating large amounts of bone in situ for treating pathologies such as large bone defects or skeletal malformations, for instance leg-length discrepancies. While an optimized distraction procedure might have the potential to reduce the rate of complications significantly, our knowledge of the underlying mechanobiological processes is still insufficient for systematic optimization of treatment parameters such as distraction rate or fixation stiffness. We present a novel numerical model of lateral distraction osteogenesis, based on a mechanically well-controlled in vivo experiment. This model extends an existing numerical model of callus healing with viscoplastic material properties for describing stress relaxation and stimuli history-dependent tissue differentiation, incorporating delay and memory effects. A reformulation of appositional growth based non-local biological stimuli in terms of spatial convolution as well as remeshing and solution-mapping procedures allow the model to cope with severe mesh distortions associated with large plastic deformations. With these enhancements, our model is capable of replicating the in vivo observations for lateral distraction osteogenesis in sheep using the same differentiation rules and the same set of parameters that successfully describes callus healing in sheep, indicating that tissue differentiation hypotheses originally developed for fracture healing scenarios might indeed be applicable to distraction as well. The response of the model to modified distraction parameters corresponds to existing studies, although the currently available data is insufficient for rigorous validation. As such, this study provides a first step towards developing models that can serve as tools for identifying both interesting research questions and, eventually, even optimizing clinical procedures once better data for calibration and validation becomes available.
- 1 May 2012
- Published by Elsevier in Journal of Biomechanics
- Vol. 45 (8) , 1414-1423
Geometry strongly influences the response of numerical models of the lumbar spine—A probabilistic finite element analysis
- 1 May 2012
- Published by Elsevier in Journal of Biomechanics
- Vol. 45 (8) , 1414-1423
Geometry strongly influences the response of numerical models of the lumbar spine—A probabilistic finite element analysis