Lies Eykens
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lies Eykens has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
C. Dotremont
VITO Flemish Inst Technol Res, Boeretang 200, B-2400 Mol, Belgium
10 shared publicationsK. De Sitter
VITO Flemish Inst Technol Res, Boeretang 200, B-2400 Mol, Belgium
10 shared publicationsB. Van der Bruggen
Katholieke Univ Leuven, Dept Chem Engn, Celestijnenlaan 200 F, B-3001 Leuven, Belgium
9 shared publicationsL. Pinoy
Katholieke Univ Leuven, Dept Chem Engn, Cluster Sustainable Chem Proc Technol, Gebroeders Desmetstr 1, B-9000 Ghent, Belgium
9 shared publicationsI. Hitsov
4 shared publicationsI. Nopens
3 shared publications
Latest Publications
- 28 February 2025
- Published by Elsevier in Construction and Building Materials
- Vol. 470
Alkanolamines as grinding aids and hydration enhancers in blended cements with iron-rich non-ferrous metallurgy slag
- 28 February 2025
- Published by Elsevier in Construction and Building Materials
- Vol. 470
Alkanolamines as grinding aids and hydration enhancers in blended cements with iron-rich non-ferrous metallurgy slag
- 2 October 2018
- Published by American Chemical Society (ACS) in Organic Process Research & Development
- Vol. 22 (11) , 1509-1517
Synthesis of Pd Complexes Containing Tailed NHC Ligands and Their Use in a Semicontinuous Membrane-Assisted Suzuki Cross-Coupling Process
- 2 October 2018
- Published by American Chemical Society (ACS) in Organic Process Research & Development
- Vol. 22 (11) , 1509-1517
Synthesis of Pd Complexes Containing Tailed NHC Ligands and Their Use in a Semicontinuous Membrane-Assisted Suzuki Cross-Coupling Process
- 1 May 2018
- Published by Elsevier in Journal of Membrane Science
- Vol. 554, 175-183
Atmospheric plasma coatings for membrane distillation
- 1 May 2018
- Published by Elsevier in Journal of Membrane Science
- Vol. 554, 175-183
Atmospheric plasma coatings for membrane distillation
- 1 November 2017
- Published by Elsevier in Desalination
- Vol. 422, 91-100
Direct contact and air gap membrane distillation: Differences and similarities between lab and pilot scale
- 1 November 2017
- Published by Elsevier in Desalination
- Vol. 422, 91-100
Direct contact and air gap membrane distillation: Differences and similarities between lab and pilot scale
- 20 July 2017
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 134 (46)
Development of polyethersulfone phase‐inversion membranes for membrane distillation using oleophobic coatings
Highly porous macrovoid‐free polyethersulfone membranes have been prepared using the phase‐inversion process with water as the non‐solvent. These membranes are of great interest for membrane distillation (MD) after application of a hydrophobic/oleophobic coating. The membrane structure was controlled by optimizing the process conditions and dope composition. Counter intuitively, increasing the polymer concentration favors the formation of larger surface pores under similar process conditions. A symmetric membrane is obtained when a sufficient amount of high‐molecular‐weight polyvinylpyrrolidone was added to the dope solution, which appears to play an important role in the structure formation process. The final membrane shows similar performance compared to commercial MD membranes. However, the membranes developed in this study show an oleophobic character, broadening the applications of MD. Moreover, the compressibility of these membranes is severely reduced compared to stretched membranes, which is expected to result in an improved MD performance at full scale. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45516.
- 20 July 2017
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 134 (46)
Development of polyethersulfone phase‐inversion membranes for membrane distillation using oleophobic coatings
Highly porous macrovoid‐free polyethersulfone membranes have been prepared using the phase‐inversion process with water as the non‐solvent. These membranes are of great interest for membrane distillation (MD) after application of a hydrophobic/oleophobic coating. The membrane structure was controlled by optimizing the process conditions and dope composition. Counter intuitively, increasing the polymer concentration favors the formation of larger surface pores under similar process conditions. A symmetric membrane is obtained when a sufficient amount of high‐molecular‐weight polyvinylpyrrolidone was added to the dope solution, which appears to play an important role in the structure formation process. The final membrane shows similar performance compared to commercial MD membranes. However, the membranes developed in this study show an oleophobic character, broadening the applications of MD. Moreover, the compressibility of these membranes is severely reduced compared to stretched membranes, which is expected to result in an improved MD performance at full scale. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45516.
- Top Cited Papers
- 1 July 2017
- Published by Elsevier in Separation and Purification Technology
- Vol. 182, 36-51
Membrane synthesis for membrane distillation: A review
- 1 July 2017
- Published by Elsevier in Separation and Purification Technology
- Vol. 182, 36-51
Top Cited PapersMembrane synthesis for membrane distillation: A review
- Open Access
- 20 June 2017
- Published by MDPI AG in Applied Sciences
- Vol. 7 (6) , 637
Functionalization of a Hydrophilic Commercial Membrane Using Inorganic-Organic Polymers Coatings for Membrane Distillation
Membrane distillation is a thermal separation technique using a microporous hydrophobic membrane. One of the concerns with respect to the industrialization of the technique is the development of novel membranes. In this paper, a commercially available hydrophilic polyethersulfone membrane with a suitable structure for membrane distillation was modified using available hydrophobic coatings using ORMOCER® technology to obtain a hydrophobic membrane that can be applied in membrane distillation. The surface modification was performed using a selection of different components, concentrations, and application methods. The resulting membranes can have two hydrophobic surfaces or a hydrophobic and hydrophilic surface depending on the application method. An extensive characterization procedure confirmed the suitability of the coating technique and the obtained membranes for membrane distillation. The surface contact angle of water could be increased from 27° up to 110°, and fluxes comparable to membranes commonly used for membrane distillation were achieved under similar process conditions. A 100 h test demonstrated the stability of the coating and the importance of using sufficiently stable base membranes.
- 20 June 2017
- Published by MDPI AG in Applied Sciences
- Vol. 7 (6) , 637
Open AccessFunctionalization of a Hydrophilic Commercial Membrane Using Inorganic-Organic Polymers Coatings for Membrane Distillation
Membrane distillation is a thermal separation technique using a microporous hydrophobic membrane. One of the concerns with respect to the industrialization of the technique is the development of novel membranes. In this paper, a commercially available hydrophilic polyethersulfone membrane with a suitable structure for membrane distillation was modified using available hydrophobic coatings using ORMOCER® technology to obtain a hydrophobic membrane that can be applied in membrane distillation. The surface modification was performed using a selection of different components, concentrations, and application methods. The resulting membranes can have two hydrophobic surfaces or a hydrophobic and hydrophilic surface depending on the application method. An extensive characterization procedure confirmed the suitability of the coating technique and the obtained membranes for membrane distillation. The surface contact angle of water could be increased from 27° up to 110°, and fluxes comparable to membranes commonly used for membrane distillation were achieved under similar process conditions. A 100 h test demonstrated the stability of the coating and the importance of using sufficiently stable base membranes.
- 1 February 2017
- Published by Elsevier in Journal of Membrane Science
- Vol. 524, 245-256
Full-scale direct contact membrane distillation (DCMD) model including membrane compaction effects
- 1 February 2017
- Published by Elsevier in Journal of Membrane Science
- Vol. 524, 245-256
Full-scale direct contact membrane distillation (DCMD) model including membrane compaction effects
- Open Access
- 25 January 2017
- Published by MDPI AG in Applied Sciences
- Vol. 7 (2) , 118
Wetting Resistance of Commercial Membrane Distillation Membranes in Waste Streams Containing Surfactants and Oil
Water management is becoming increasingly challenging and several technologies, including membrane distillation (MD) are emerging. This technology is less affected by salinity compared to reverse osmosis and is able to treat brines up to saturation. The focus of MD research recently shifted from seawater desalination to industrial applications out of the scope of reverse osmosis. In many of these applications, surfactants or oil traces are present in the feed stream, lowering the surface tension and increasing the risk for membrane wetting. In this study, the technological boundaries of MD in the presence of surfactants are investigated using surface tension, contact angle and liquid entry pressure measurements together with lab-scale MD experiments to predict the wetting resistance of different membranes. Synthetic NaCl solutions mixed with sodium dodecyl sulfate (SDS) were used as feed solution. The limiting surfactant concentration was found to be dependent on the surface chemistry of the membrane, and increased with increasing hydrophobicity and oleophobicity. Additionally, a hexadecane/SDS emulsion was prepared with a composition simulating produced water, a waste stream in the oil and gas sector. When hexadecane is present in the emulsion, oleophobic membranes are able to resist wetting, whereas polytetrafluoretheen (PTFE) is gradually wetted by the feed liquid.
- 25 January 2017
- Published by MDPI AG in Applied Sciences
- Vol. 7 (2) , 118
Open AccessWetting Resistance of Commercial Membrane Distillation Membranes in Waste Streams Containing Surfactants and Oil
Water management is becoming increasingly challenging and several technologies, including membrane distillation (MD) are emerging. This technology is less affected by salinity compared to reverse osmosis and is able to treat brines up to saturation. The focus of MD research recently shifted from seawater desalination to industrial applications out of the scope of reverse osmosis. In many of these applications, surfactants or oil traces are present in the feed stream, lowering the surface tension and increasing the risk for membrane wetting. In this study, the technological boundaries of MD in the presence of surfactants are investigated using surface tension, contact angle and liquid entry pressure measurements together with lab-scale MD experiments to predict the wetting resistance of different membranes. Synthetic NaCl solutions mixed with sodium dodecyl sulfate (SDS) were used as feed solution. The limiting surfactant concentration was found to be dependent on the surface chemistry of the membrane, and increased with increasing hydrophobicity and oleophobicity. Additionally, a hexadecane/SDS emulsion was prepared with a composition simulating produced water, a waste stream in the oil and gas sector. When hexadecane is present in the emulsion, oleophobic membranes are able to resist wetting, whereas polytetrafluoretheen (PTFE) is gradually wetted by the feed liquid.
- 1 December 2016
- Published by Elsevier in Desalination
- Vol. 399, 105-115
How to select a membrane distillation configuration? Process conditions and membrane influence unraveled
- 1 December 2016
- Published by Elsevier in Desalination
- Vol. 399, 105-115
How to select a membrane distillation configuration? Process conditions and membrane influence unraveled