Dong Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Dong Jiang has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
Xiyu Hu
Engineering Research Center of High Performance Plastics
7 shared publicationsXiaochen Hou
Engineering Research Center of High Performance Plastics, Ministry of Education, College of Chemistry, Jilin University, Changchun, China
5 shared publicationsYing Hu
Engineering Research Center of High Performance Plastics
4 shared publicationsRong‐Tang Ma
Alan G. MacDiarmid Lab , College of Chemistry, Jilin University , Changchun, P. R. China
2 shared publicationsYinan Zhang
Engineering Research Center of High Performance Plastics, Ministry of Education, College of Chemistry, Jilin University, Changchun, China
2 shared publicationsYiqiao Guo
Engineering Research Center of High Performance Plastics, Ministry of Education, College of Chemistry, Jilin University, Changchun, China
2 shared publications
Latest Publications
- 3 March 2021
- Published by Springer Nature in Fibers and Polymers
- Vol. 22 (3) , 685-693
Application and Performance of Cellulose Acetate/γ-Poly(glutamic acid)/TiO2 Electrospun Fibrous Membranes
- 3 March 2021
- Published by Springer Nature in Fibers and Polymers
- Vol. 22 (3) , 685-693
Application and Performance of Cellulose Acetate/γ-Poly(glutamic acid)/TiO2 Electrospun Fibrous Membranes
- 13 February 2020
- Published by SAGE Publications in High Performance Polymers
- Vol. 32 (7) , 849-856
Preparation and performance of cadmium sulfide/sulfonated poly(ether ether ketone) nanocomposite materials
We report a kind of cadmium sulfide (CdS)/sulfonated poly(ether ether ketone) (SPEEK) composite via in situ for the first time. It is a new type of nanocomposite possessing outstanding fluorescence property and thermostability. The SPEEK has the sulfonic radical side group and the degree of the sulfonation is 0.88. With the SPEEK dissolving in the N, N-dimethylformamide, cadmium acetate dihydrate (cadmium (Cd) source) was added to make the precursor for the reaction and then the thiourea (sulfur (S) source) was injected. We also investigated the effects of reaction time, the ratio of Cd/S, and the ratio of Cd/–SO3H. The ultraviolet–visible and photoluminescence spectroscopy and thermogravimetric analysis were used to characterize the property of the nanocomposite. The high resolution transmission electron microscope (HRTEM) was used to characterize the morphological of the composite. As the reaction time increases, the photoluminescence intensity declined and the fluorescence peak redshifted. When the reaction time was 1 min, the ratio of Cd/S was 1:2 and the ratio of Cd/–SO3H was 1:5, and the fluorescence properties of the nanocomposites were the best.
- 13 February 2020
- Published by SAGE Publications in High Performance Polymers
- Vol. 32 (7) , 849-856
Preparation and performance of cadmium sulfide/sulfonated poly(ether ether ketone) nanocomposite materials
We report a kind of cadmium sulfide (CdS)/sulfonated poly(ether ether ketone) (SPEEK) composite via in situ for the first time. It is a new type of nanocomposite possessing outstanding fluorescence property and thermostability. The SPEEK has the sulfonic radical side group and the degree of the sulfonation is 0.88. With the SPEEK dissolving in the N, N-dimethylformamide, cadmium acetate dihydrate (cadmium (Cd) source) was added to make the precursor for the reaction and then the thiourea (sulfur (S) source) was injected. We also investigated the effects of reaction time, the ratio of Cd/S, and the ratio of Cd/–SO3H. The ultraviolet–visible and photoluminescence spectroscopy and thermogravimetric analysis were used to characterize the property of the nanocomposite. The high resolution transmission electron microscope (HRTEM) was used to characterize the morphological of the composite. As the reaction time increases, the photoluminescence intensity declined and the fluorescence peak redshifted. When the reaction time was 1 min, the ratio of Cd/S was 1:2 and the ratio of Cd/–SO3H was 1:5, and the fluorescence properties of the nanocomposites were the best.
- Open Access
- 31 July 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (48) , 27304-27317
Enhancing the mechanical performance of poly(ether ether ketone)/zinc oxide nanocomposites to provide promising biomaterials for trauma and orthopedic implants
Poly(ether ether ketone)/zinc oxide (PEEK/ZnO) composites were manufactured by using the injection molding technique.
- 31 July 2018
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 8 (48) , 27304-27317
Open AccessEnhancing the mechanical performance of poly(ether ether ketone)/zinc oxide nanocomposites to provide promising biomaterials for trauma and orthopedic implants
Poly(ether ether ketone)/zinc oxide (PEEK/ZnO) composites were manufactured by using the injection molding technique.
- 23 May 2018
- Published by SAGE Publications in Textile Research Journal
- Vol. 89 (9) , 1642-1657
Performance and drug release studies of poly (ɛ-caprolactone)/γ-poly (glutamic acid) fibrous membranes
Fibrous membranes of poly(ɛ-caprolactone)/γ-poly(glutamicacid) (PCL/γ-PGA) composites were successfully produced via an electrospinning process. In doing so, the water solubility of florfenicol (FF) could be enhanced and the drug release properties of FF could be controlled. The mechanical, morphologic, and thermal properties of the fibrous membranes of PCL/γ-PGA were studied by using an electronic single fiber strength machine, scanning electron microscopy, and differential scanning calorimetry. The wettability of the fibrous membranes of PCL/γ-PGA was also measured as discussed in the subsequent section. Fourier transform infrared spectroscopy was applied in the structural analysis of the PCL/γ-PGA-FF fibrous membranes. The results indicated that FF was well blended in the composite membranes of PCL/γ-PGA. In vitro dissolution tests showed that PCL/γ-PGA (85/15; 8%) as both a biodegradable and biocompatible blend may improve the solubility of FF. Therefore, fibrous membranes of PCL/γ-PGA may represent ideal materials for the controlled drug release in various clinical applications.
- 23 May 2018
- Published by SAGE Publications in Textile Research Journal
- Vol. 89 (9) , 1642-1657
Performance and drug release studies of poly (ɛ-caprolactone)/γ-poly (glutamic acid) fibrous membranes
Fibrous membranes of poly(ɛ-caprolactone)/γ-poly(glutamicacid) (PCL/γ-PGA) composites were successfully produced via an electrospinning process. In doing so, the water solubility of florfenicol (FF) could be enhanced and the drug release properties of FF could be controlled. The mechanical, morphologic, and thermal properties of the fibrous membranes of PCL/γ-PGA were studied by using an electronic single fiber strength machine, scanning electron microscopy, and differential scanning calorimetry. The wettability of the fibrous membranes of PCL/γ-PGA was also measured as discussed in the subsequent section. Fourier transform infrared spectroscopy was applied in the structural analysis of the PCL/γ-PGA-FF fibrous membranes. The results indicated that FF was well blended in the composite membranes of PCL/γ-PGA. In vitro dissolution tests showed that PCL/γ-PGA (85/15; 8%) as both a biodegradable and biocompatible blend may improve the solubility of FF. Therefore, fibrous membranes of PCL/γ-PGA may represent ideal materials for the controlled drug release in various clinical applications.
- 9 October 2017
- Published by SAGE Publications in Plastics, Rubber and Composites: Macromolecular Engineering
- Vol. 46 (9) , 381-388
Preparation and performance of CdS-hyperbranched poly(arylene ether ketone) nanocomposite materials
A new kind of CdS-hyperbranched poly (arylene ether ketone) (HP-PAEK) nanocomposite was prepared in dimethylformamide solution by carboxylic-functionalised HP-PAEK as surface modifier without ligand exchange. The CdS/HP-PAEK nanocomposites were characterised through ultraviolet–visible and photoluminescence spectroscopy. The experimental results of photoluminescence measurement showed that the nanocomposites had obvious luminescence properties. The formation and size of CdS quantum dots were determined by Fourier transform infrared spectroscopy and transmission electron microscopy. The thermal properties of CdS/HP-PAEK nanocomposites were analysed by differential scanning calorimetry and thermogravimetric analysis. Owing to the introduction of CdS nanoparticles, the nanocomposites exhibited excellent heat resistance and higher fluorescent quantum efficiency.
- 9 October 2017
- Published by SAGE Publications in Plastics, Rubber and Composites: Macromolecular Engineering
- Vol. 46 (9) , 381-388
Preparation and performance of CdS-hyperbranched poly(arylene ether ketone) nanocomposite materials
A new kind of CdS-hyperbranched poly (arylene ether ketone) (HP-PAEK) nanocomposite was prepared in dimethylformamide solution by carboxylic-functionalised HP-PAEK as surface modifier without ligand exchange. The CdS/HP-PAEK nanocomposites were characterised through ultraviolet–visible and photoluminescence spectroscopy. The experimental results of photoluminescence measurement showed that the nanocomposites had obvious luminescence properties. The formation and size of CdS quantum dots were determined by Fourier transform infrared spectroscopy and transmission electron microscopy. The thermal properties of CdS/HP-PAEK nanocomposites were analysed by differential scanning calorimetry and thermogravimetric analysis. Owing to the introduction of CdS nanoparticles, the nanocomposites exhibited excellent heat resistance and higher fluorescent quantum efficiency.
- 1 August 2017
- Published by SAGE Publications in High Performance Polymers
- Vol. 30 (6) , 643-656
Improvement in the mechanical and friction performance of poly(ether ether ketone) composites by addition of modificatory short carbon fibers and zinc oxide
The composites of poly(ether ether ketone) (PEEK) with zinc oxide (ZnO) nanoparticles and short carbon fibers (SCFs) were produced with twin-screw extruder. ZnO nanoparticles were modified by γ-aminopropyl triethoxyl silane (APTES), and SCFs were wrapped with poly(ether sulfone) (PES). Morphological examination showed that the modified ZnO (m-ZnO) nanoparticles and wrapped SCFs (w-SCFs) were well dispersed in PEEK. The tribological behavior of PEEK composites under dry friction conditions was studied using a universal micro-tribotester. Exhaustive experimental results showed that the tribological behaviors, or the mechanical and thermal properties of the composites after the addition of m-ZnO nanoparticles and w-SCFs, were improved. The tribological properties of PEEK/ZnO/SCFs composites with 5.0 wt% functionalized ZnO and 10.0 wt% w-SCFs are the minimum.
- 1 August 2017
- Published by SAGE Publications in High Performance Polymers
- Vol. 30 (6) , 643-656
Improvement in the mechanical and friction performance of poly(ether ether ketone) composites by addition of modificatory short carbon fibers and zinc oxide
The composites of poly(ether ether ketone) (PEEK) with zinc oxide (ZnO) nanoparticles and short carbon fibers (SCFs) were produced with twin-screw extruder. ZnO nanoparticles were modified by γ-aminopropyl triethoxyl silane (APTES), and SCFs were wrapped with poly(ether sulfone) (PES). Morphological examination showed that the modified ZnO (m-ZnO) nanoparticles and wrapped SCFs (w-SCFs) were well dispersed in PEEK. The tribological behavior of PEEK composites under dry friction conditions was studied using a universal micro-tribotester. Exhaustive experimental results showed that the tribological behaviors, or the mechanical and thermal properties of the composites after the addition of m-ZnO nanoparticles and w-SCFs, were improved. The tribological properties of PEEK/ZnO/SCFs composites with 5.0 wt% functionalized ZnO and 10.0 wt% w-SCFs are the minimum.
- 15 June 2017
- Published by SAGE Publications in High Performance Polymers
- Vol. 30 (6) , 657-666
Thermal, mechanical, and tribological properties of short carbon fibers/PEEK composites
In this work, the effect of thermal, mechanical, and tribological properties of the blending system of different contents of short carbon fibers (SCFs) on different-viscosity poly-ether-ether-ketone (PEEK) was reported. The composites were manufactured using injection molding technique. Mechanical and tribological properties were measured by the tensile strength, the flexural strength, the coefficient of friction, and the wear rate. The results showed that the wear resistance and mechanical properties of the PEEK with the lower viscosity appeared on a more outstanding level, and experimental results showed that PEEK composites with added 10 wt% SCFs were optimal about the tribological behaviors and mechanical properties of the composites. Furthermore, based on scanning electron microscope inspections, the situation of the friction and worn surface of the material was explained.
- 15 June 2017
- Published by SAGE Publications in High Performance Polymers
- Vol. 30 (6) , 657-666
Thermal, mechanical, and tribological properties of short carbon fibers/PEEK composites
In this work, the effect of thermal, mechanical, and tribological properties of the blending system of different contents of short carbon fibers (SCFs) on different-viscosity poly-ether-ether-ketone (PEEK) was reported. The composites were manufactured using injection molding technique. Mechanical and tribological properties were measured by the tensile strength, the flexural strength, the coefficient of friction, and the wear rate. The results showed that the wear resistance and mechanical properties of the PEEK with the lower viscosity appeared on a more outstanding level, and experimental results showed that PEEK composites with added 10 wt% SCFs were optimal about the tribological behaviors and mechanical properties of the composites. Furthermore, based on scanning electron microscope inspections, the situation of the friction and worn surface of the material was explained.
- 6 April 2017
- Published by SAGE Publications in High Performance Polymers
- Vol. 30 (4) , 406-417
Poly (ether ether ketone) composites reinforced by graphene oxide and silicon dioxide nanoparticles
Wear-resistant composites with excellent tribological performances and good mechanical/thermal properties were developed by blending the modification of nano-silicon dioxide (m-SiO2) and the modification of graphene oxide (m-GO) with a poly (ether ether ketone) (PEEK) matrix by twin-screw extrusion compounding and subsequently injection molding. The tribological behaviors and the mechanical/thermal properties of the composites were carefully investigated. Compared with pure PEEK, PEEK/m-GO, and PEEK/m-SiO2 composites, the PEEK/m-GO/m-SiO2 composites exhibited considerable enhancements in those performances. These were attributed to m-GO and m-SiO2 that carried the majority of the load during a sliding process and prevented severe wear of the matrix.
- 6 April 2017
- Published by SAGE Publications in High Performance Polymers
- Vol. 30 (4) , 406-417
Poly (ether ether ketone) composites reinforced by graphene oxide and silicon dioxide nanoparticles
Wear-resistant composites with excellent tribological performances and good mechanical/thermal properties were developed by blending the modification of nano-silicon dioxide (m-SiO2) and the modification of graphene oxide (m-GO) with a poly (ether ether ketone) (PEEK) matrix by twin-screw extrusion compounding and subsequently injection molding. The tribological behaviors and the mechanical/thermal properties of the composites were carefully investigated. Compared with pure PEEK, PEEK/m-GO, and PEEK/m-SiO2 composites, the PEEK/m-GO/m-SiO2 composites exhibited considerable enhancements in those performances. These were attributed to m-GO and m-SiO2 that carried the majority of the load during a sliding process and prevented severe wear of the matrix.
- 5 April 2016
- Published by Wiley in Polymer Composites
- Vol. 38 (S1)
Synthesis and photoluminescence study of hyperbranched poly(arylene ether ketone) nanocomposites containing cadmium sulfide nanoparticles
In the present research, it reported the synthesis and characterization of hyperbranched poly(arylene ether ketone) (HPAEK)‐cadmium sulfide nanocomposites prepared using carboxylic‐functionalized HPAEK (ACA‐HPAEK) as the ligand in N,N‐dimethylformamide solution from Cd(Ac)2 and thiourea. The optical characterization of the CdS/ACA‐HPAEK nanocomposites had been carried out by UV‐vis absorption and photoluminescence (PL) spectroscopy while the morphological properties had been investigated by transmission electron microscopy. The results of PL measurement showed that the nanocomposite exhibited distinct luminescence properties. Furthermore, the thermal properties had been characterized by differential scanning calorimetry and thermogravimetric analysis. The analyses had shown that CdS quantum dots with diameter about 4 nm could be synthesized by such route and the nanocomposites exhibited not only good light emission in the UV range but also excellent heat resistance. In general, a new CdS/ACA‐HPAEK nanohybrid was synthesized without ligand exchange, and had good optical properties and excellent heat resistance. POLYM. COMPOS., 38:E508–E514, 2017. © 2016 Society of Plastics Engineers
- 5 April 2016
- Published by Wiley in Polymer Composites
- Vol. 38 (S1)
Synthesis and photoluminescence study of hyperbranched poly(arylene ether ketone) nanocomposites containing cadmium sulfide nanoparticles
In the present research, it reported the synthesis and characterization of hyperbranched poly(arylene ether ketone) (HPAEK)‐cadmium sulfide nanocomposites prepared using carboxylic‐functionalized HPAEK (ACA‐HPAEK) as the ligand in N,N‐dimethylformamide solution from Cd(Ac)2 and thiourea. The optical characterization of the CdS/ACA‐HPAEK nanocomposites had been carried out by UV‐vis absorption and photoluminescence (PL) spectroscopy while the morphological properties had been investigated by transmission electron microscopy. The results of PL measurement showed that the nanocomposite exhibited distinct luminescence properties. Furthermore, the thermal properties had been characterized by differential scanning calorimetry and thermogravimetric analysis. The analyses had shown that CdS quantum dots with diameter about 4 nm could be synthesized by such route and the nanocomposites exhibited not only good light emission in the UV range but also excellent heat resistance. In general, a new CdS/ACA‐HPAEK nanohybrid was synthesized without ligand exchange, and had good optical properties and excellent heat resistance. POLYM. COMPOS., 38:E508–E514, 2017. © 2016 Society of Plastics Engineers
- 1 August 2011
- Published by Walter de Gruyter GmbH in Journal of Polymer Engineering
- Vol. 31 (4)
Synthesis and properties of random polysulfone/polyethersulfone copolymers as high-performance polymers
A series of random polysulfone/polyethersulfone (PSF/PES) copolymers were synthesized by the polycondensation of 4,4′-isopropylidenediphenol, 4,4′-dihydroxyldiphenylsulfone, and 4,4′-dichlorodiphenylsulfone in the presence of potassium carbonate. The resulting copolymers displayed similar solubility with PSF and PES. The glass transition temperature and the 5% weight loss temperature of these copolymers varied in the range of 199°C–299°C and 467°C–498°C, respectively, which showed excellent thermal stability. Moreover, the elongation at break of these copolymers was much higher than that of PES, whereas the tensile strength was a little lower.
- 1 August 2011
- Published by Walter de Gruyter GmbH in Journal of Polymer Engineering
- Vol. 31 (4)
Synthesis and properties of random polysulfone/polyethersulfone copolymers as high-performance polymers
A series of random polysulfone/polyethersulfone (PSF/PES) copolymers were synthesized by the polycondensation of 4,4′-isopropylidenediphenol, 4,4′-dihydroxyldiphenylsulfone, and 4,4′-dichlorodiphenylsulfone in the presence of potassium carbonate. The resulting copolymers displayed similar solubility with PSF and PES. The glass transition temperature and the 5% weight loss temperature of these copolymers varied in the range of 199°C–299°C and 467°C–498°C, respectively, which showed excellent thermal stability. Moreover, the elongation at break of these copolymers was much higher than that of PES, whereas the tensile strength was a little lower.