Emma Moliner
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Emma Moliner has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Martínez- Rodrigo
Department of Mechanical Engineering and Construction, Universitat Jaume I, Castellón, Spain
17 shared publications - Pedro Galvín
Escuela Técnica Superior de Ingeniería, Universidad de Sevilla, Sevilla, Spain
16 shared publications - Antonio Romero
Universidad de Sevilla
11 shared publications - Pedro Museros
Department of Continuum Mechanics and Theory of Structures, Universitat Politécnica Valéncia, Valencia, Spain
7 shared publications A. Romero
4 shared publications- Juan Carlos Sánchez Quesada
Universitat Jaume I
4 shared publications
Latest Publications
- Open Access
- 18 November 2026
- Published by Springer Nature
- p. 533-540
Comparative Evaluation of Vertical Acceleration in High-Speed Railway Bridges in Europe: 2D vs 3D SLS Approaches
In this study the vertical dynamic response of existing bridges on various European High-Speed (HS) railway lines is investigated. As part of the European project InBridge4EU, a comprehensive railway bridge database is developed, encompassing over 500 bridges from 11 railway lines across five countries. The bridges dynamic performance is assessed based on the Serviceability Limit State for traffic safety by computing the maximum vertical acceleration at the platform under railway traffic. First, the dynamic response of all the bridges is obtained using 2D analytical beam models, limiting the response to that caused by longitudinal bending modes. Then, those bridges exceeding an acceleration criterion are re-evaluated by 3D analyses involving detailed finite element (FE) models tailored to each bridge configuration. Using the 2D simplified analysis results, the maximum response is evaluated statistically in terms of several parameters (i.e. span length, linear mass, frequency, configuration, deck type, obliqueness, etc.) Then, with the 3D re-evaluation the limitations inherent to simplified planar modelling approaches are discussed.
- 18 November 2026
- Published by Springer Nature
- p. 533-540
Open AccessComparative Evaluation of Vertical Acceleration in High-Speed Railway Bridges in Europe: 2D vs 3D SLS Approaches
In this study the vertical dynamic response of existing bridges on various European High-Speed (HS) railway lines is investigated. As part of the European project InBridge4EU, a comprehensive railway bridge database is developed, encompassing over 500 bridges from 11 railway lines across five countries. The bridges dynamic performance is assessed based on the Serviceability Limit State for traffic safety by computing the maximum vertical acceleration at the platform under railway traffic. First, the dynamic response of all the bridges is obtained using 2D analytical beam models, limiting the response to that caused by longitudinal bending modes. Then, those bridges exceeding an acceleration criterion are re-evaluated by 3D analyses involving detailed finite element (FE) models tailored to each bridge configuration. Using the 2D simplified analysis results, the maximum response is evaluated statistically in terms of several parameters (i.e. span length, linear mass, frequency, configuration, deck type, obliqueness, etc.) Then, with the 3D re-evaluation the limitations inherent to simplified planar modelling approaches are discussed.
- Open Access
- 15 July 2026
- Published by Springer Nature in Advances in Bridge Engineering
- Vol. 7 (1) , 28
Maximum vertical acceleration patterns in skewed multi-span railway bridges under increasing operational speeds
This study investigates maximum vertical acceleration patterns in highly skewed, multi-span railway bridges, focusing on Serviceability Limit State (SLS) performance under increasing operational speeds. A 3D finite element model of a representative Spanish high-speed girder bridge is employed, explicitly incorporating the ballasted track and weak coupling between spans. The dynamic response is assessed using three train excitation models of increasing complexity: the simple moving load model (TLM), a vehicle-bridge interaction (VBI) model, and the latter incorporating track irregularities (VBI- $$\eta$$ ). The influence of deck skewness, modal participation, and ballast degradation at the simply-supported span interfaces is examined, along with a comparison to simplified analyses following code provisions. Quantitative results demonstrate that increasing deck skewness, from 90 $$^{\circ }$$ to 134 $$^{\circ }$$ , significantly reduces vertical accelerations by raising the first longitudinal bending and the first torsion frequencies, thus shifting prominent resonances outside the speed range of interest. While vehicle-bridge interaction (VBI) generally reduces accelerations at high speeds, track irregularities (VBI- $$\eta$$ ) can notably influence the maximum response depending on the speed window. The weak coupling between simply-supported spans affects spatial acceleration distribution, with maximum responses increasing near the supports. Additionally, localized ballast degradation at span interfaces impacts local peak accelerations. Comparisons show that code-based simplified models consistently overestimate accelerations above 300 km/h. These findings provide critical data for SLS compliance and speed upgrade assessments in multi-span skewed bridges.- 15 July 2026
- Published by Springer Nature in Advances in Bridge Engineering
- Vol. 7 (1) , 28
Open AccessMaximum vertical acceleration patterns in skewed multi-span railway bridges under increasing operational speeds
This study investigates maximum vertical acceleration patterns in highly skewed, multi-span railway bridges, focusing on Serviceability Limit State (SLS) performance under increasing operational speeds. A 3D finite element model of a representative Spanish high-speed girder bridge is employed, explicitly incorporating the ballasted track and weak coupling between spans. The dynamic response is assessed using three train excitation models of increasing complexity: the simple moving load model (TLM), a vehicle-bridge interaction (VBI) model, and the latter incorporating track irregularities (VBI- $$\eta$$ ). The influence of deck skewness, modal participation, and ballast degradation at the simply-supported span interfaces is examined, along with a comparison to simplified analyses following code provisions. Quantitative results demonstrate that increasing deck skewness, from 90 $$^{\circ }$$ to 134 $$^{\circ }$$ , significantly reduces vertical accelerations by raising the first longitudinal bending and the first torsion frequencies, thus shifting prominent resonances outside the speed range of interest. While vehicle-bridge interaction (VBI) generally reduces accelerations at high speeds, track irregularities (VBI- $$\eta$$ ) can notably influence the maximum response depending on the speed window. The weak coupling between simply-supported spans affects spatial acceleration distribution, with maximum responses increasing near the supports. Additionally, localized ballast degradation at span interfaces impacts local peak accelerations. Comparisons show that code-based simplified models consistently overestimate accelerations above 300 km/h. These findings provide critical data for SLS compliance and speed upgrade assessments in multi-span skewed bridges. - Open Access
- 16 November 2025
- Published by Elsevier in Structures
- Vol. 82
Efficient simulation of the soil–structure interaction on the dynamic response of a portal frame railway bridge
- 16 November 2025
- Published by Elsevier in Structures
- Vol. 82
Open AccessEfficient simulation of the soil–structure interaction on the dynamic response of a portal frame railway bridge
- Open Access
Time–Frequency Analysis of Railway Bridges Forced and Free Vibrations Identified by Wavelet Transform
In this work, a time–frequency analysis of two railway bridges included in the InBridge4EU project database is presented. The study focuses on the identification of modal parameters from free responses after train passages and their comparison with estimations obtained from ambient vibration data. The wavelet transform is introduced as a valuable tool for detecting both free and forced bridge responses due to different train passages, as well as for conducting time–frequency analysis. This approach is particularly relevant for the identification of structural damping, given its dependence on vibration amplitude, as it enables the estimation of realistic values representative of bridge behavior under operational conditions. Additionally, the paper examines the complementary use of free vibrations for identifying natural frequencies and comparing them with results from ambient vibration tests. Wavelet analysis further reveals the predominant frequencies in the structural response before, during, and after train crossings, thereby capturing the influence of the moving vehicle on bridge dynamics.
Open AccessTime–Frequency Analysis of Railway Bridges Forced and Free Vibrations Identified by Wavelet Transform
In this work, a time–frequency analysis of two railway bridges included in the InBridge4EU project database is presented. The study focuses on the identification of modal parameters from free responses after train passages and their comparison with estimations obtained from ambient vibration data. The wavelet transform is introduced as a valuable tool for detecting both free and forced bridge responses due to different train passages, as well as for conducting time–frequency analysis. This approach is particularly relevant for the identification of structural damping, given its dependence on vibration amplitude, as it enables the estimation of realistic values representative of bridge behavior under operational conditions. Additionally, the paper examines the complementary use of free vibrations for identifying natural frequencies and comparing them with results from ambient vibration tests. Wavelet analysis further reveals the predominant frequencies in the structural response before, during, and after train crossings, thereby capturing the influence of the moving vehicle on bridge dynamics.
- 1 October 2025
- Published by Springer Nature
- p. 499-505
Time-Frequency Analysis of Railway Bridges Forced and Free Vibrations by Wavelet Transform
- 1 October 2025
- Published by Springer Nature
- p. 499-505
Time-Frequency Analysis of Railway Bridges Forced and Free Vibrations by Wavelet Transform
- 30 September 2024
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
- Vol. 25 (24)
Data-Driven Relationship for Reduction Factor of Ballasted Railway Bridge Deflections Due to Load Distribution Within Track
Increasing the operating speed of the trains on modern networks necessitates performing dynamic analyses to assess the performance of bridges under passage of trains. The detailed investigation of their responses requires constructing complex computational models capable to take the train–track–bridge interaction effects into account. Such models have successfully been developed; however, employing those elaborated models for practical engineering applications, or to perform studies that require a large number of analyses may become infeasible. Among such situations are conducting probabilistic investigations, screening of entire networks, or sensitivity analyses. These concerns have been addressed by employing simplified models mostly relying on moving load modeling strategy which disregards the train–track–bridge interaction effects. Those neglected contributions can be compensated by implementing additional correction factors. The distribution of loads within track is one of those disregarded effects where a reduction factor is recommended by design guidelines to take its contribution into account. It has been shown that the existing relationship for these reduction factors delivers an acceptable performance for vertical accelerations, while showing a less favorable performance for displacements. Then, a data-driven strategy is adopted in this study to propose easy-to-apply relationships for reduction factors of deflections, due to load distribution within the track. In this context, three different distributive lengths of triangular load footprints have been considered, namely 2.0, 2.5 and 3.0[ ]m. The procedure employed has trained and tested for more than 1[ ]200 train configurations, comprising conventional, articulated and regular vehicles, and including several tens of thousand data points for each distributive length. The performance observed in the new models revealed a considerable improvement with respect to the existing relationship.
- 30 September 2024
- Published by World Scientific Pub Co Pte Ltd in International Journal of Structural Stability and Dynamics
- Vol. 25 (24)
Data-Driven Relationship for Reduction Factor of Ballasted Railway Bridge Deflections Due to Load Distribution Within Track
Increasing the operating speed of the trains on modern networks necessitates performing dynamic analyses to assess the performance of bridges under passage of trains. The detailed investigation of their responses requires constructing complex computational models capable to take the train–track–bridge interaction effects into account. Such models have successfully been developed; however, employing those elaborated models for practical engineering applications, or to perform studies that require a large number of analyses may become infeasible. Among such situations are conducting probabilistic investigations, screening of entire networks, or sensitivity analyses. These concerns have been addressed by employing simplified models mostly relying on moving load modeling strategy which disregards the train–track–bridge interaction effects. Those neglected contributions can be compensated by implementing additional correction factors. The distribution of loads within track is one of those disregarded effects where a reduction factor is recommended by design guidelines to take its contribution into account. It has been shown that the existing relationship for these reduction factors delivers an acceptable performance for vertical accelerations, while showing a less favorable performance for displacements. Then, a data-driven strategy is adopted in this study to propose easy-to-apply relationships for reduction factors of deflections, due to load distribution within the track. In this context, three different distributive lengths of triangular load footprints have been considered, namely 2.0, 2.5 and 3.0[ ]m. The procedure employed has trained and tested for more than 1[ ]200 train configurations, comprising conventional, articulated and regular vehicles, and including several tens of thousand data points for each distributive length. The performance observed in the new models revealed a considerable improvement with respect to the existing relationship.
- Open Access
- 12 June 2024
- Published by Elsevier in Engineering Structures
- Vol. 314
Track–bridge interaction effects in the acceleration and displacement response of high-speed railway bridges: Simplified vs refined modelling
- 12 June 2024
- Published by Elsevier in Engineering Structures
- Vol. 314
Open AccessTrack–bridge interaction effects in the acceleration and displacement response of high-speed railway bridges: Simplified vs refined modelling
- Open Access
- 7 December 2023
- Published by Elsevier in Mechanical Systems and Signal Processing
- Vol. 208
Design, tuning and in-field validation of energy harvesters for railway bridges
- 7 December 2023
- Published by Elsevier in Mechanical Systems and Signal Processing
- Vol. 208
Open AccessDesign, tuning and in-field validation of energy harvesters for railway bridges
- 3 June 2023
- Published by Springer Nature
- p. 342-351
Numerical-Experimental Assessment of the SLS for Traffic Safety in Skewed High-Speed Railway Bridges
- 3 June 2023
- Published by Springer Nature
- p. 342-351
Numerical-Experimental Assessment of the SLS for Traffic Safety in Skewed High-Speed Railway Bridges
- 11 January 2023
- Published by Elsevier in Engineering Structures
- Vol. 279
3D analysis of railway induced vibrations on skew girder bridges including ballast track–bridge interaction effects
- 11 January 2023
- Published by Elsevier in Engineering Structures
- Vol. 279
3D analysis of railway induced vibrations on skew girder bridges including ballast track–bridge interaction effects