Begoña Peña
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Begoña Peña has a total of 47 co-authors. Here are the top co-authors by number of shared publications:
- Manuel Bailera
Energy and CO2 Group, Department of Mechanical Engineering, Aragon Institute of Engineering Research (I3A), University of Zaragoza, 50018 Zaragoza, Spain
14 shared publications - Jorge Perpiñán
Escuela de Ingeniería y Arquitectura, Universidad de Zaragoza, María de Luna 3, 50018 Zaragoza, Spain
7 shared publications - Luis Miguel Romeo
Aragon Institute of Engineering Research (I3A), Universidad de Zaragoza, Department of Mechanical Engineering, María de Luna 1, Zaragoza 50018, Spain
7 shared publications - Ignacio Zabalza
CIRCE Research Institute, University of Zaragoza, 50018 Zaragoza, Spain
5 shared publications - Pilar Lisbona
Aragon Institute of Engineering Research (I3A), Universidad de Zaragoza
4 shared publications - Cristian Barón3 shared publications
Latest Publications
- Open Access
- 21 August 2026
- Published by Elsevier in Renewable Energy
- Vol. 275
Carbon capture and oxy-combustion for glassmaking decarbonization through Power-to-Gas: technical and economic viability assessment
- 21 August 2026
- Published by Elsevier in Renewable Energy
- Vol. 275
Open AccessCarbon capture and oxy-combustion for glassmaking decarbonization through Power-to-Gas: technical and economic viability assessment
- Open Access
A comparison of carbon capture and biomass utilisation for decarbonising oxygen blast furnace ironmaking
- Open Access
- 22 April 2025
- Published by Elsevier in Renewable Energy
- Vol. 250
Development, testing, performance analysis and modelling of a biochar-based catalyst for methanation reaction
- 22 April 2025
- Published by Elsevier in Renewable Energy
- Vol. 250
Open AccessDevelopment, testing, performance analysis and modelling of a biochar-based catalyst for methanation reaction
- Open Access
- 28 January 2025
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 13 (2)
Testing Ni-based catalysts for the methanation of industrial gases at different levels of sulfur poisoning: From catalysts formulation optimization to kinetics
- 28 January 2025
- Published by Elsevier in Journal of Environmental Chemical Engineering
- Vol. 13 (2)
Open AccessTesting Ni-based catalysts for the methanation of industrial gases at different levels of sulfur poisoning: From catalysts formulation optimization to kinetics
- Open Access
- 7 June 2024
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 201
Outline of all potential Power to Gas integrations in blast furnace ironmaking: A systematic review
- 7 June 2024
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 201
Open AccessOutline of all potential Power to Gas integrations in blast furnace ironmaking: A systematic review
- Open Access
- 1 January 2024
- Published by Elsevier in SSRN Electronic Journal
Techno-economic Assessment and Comparison of Different Power-to-Gas Configurations with CCU in the Iron and Steel Industry
The iron and steel industry stands as a significant contributor to global carbon emissions. In current times, various decarbonization strategies are being explored to mitigate environmental impact. Asian producers mainly concentrate on integrating carbon capture and carbon recycling technologies into blast furnaces. On the other hand, European producers predominantly lean towards the adoption of hydrogen in direct reduction processes. While the latter approach holds promise in averting CO2 emissions during iron ore reduction, it is essential to note that these producers may still release CO2 through other plant processes. In the context of blast furnaces, both the consumption of coke (a fossil fuel) and the iron ore reduction process contribute to the generation of CO2. The blast furnace-basic oxygen furnace (BF-BOF) route presently dominates steel manufacturing, constituting over 70% of global production. Given its heavy reliance on coal and coke, this method stands out as one of the largest industrial emitters of greenhouse gases worldwide, emitting approximately 1.8-2.0 tons of CO2 per ton of steel and contributing to 7% of global CO2 emissions. To address such environmental challenges, the promotion of synthetic fuels through Carbon Capture and Utilization (CCU), leveraging the industry's own emissions in a carbon cycle, has gained traction. However, the implementation of processes like methanation for synthetic natural gas generation presents challenges in industries of this nature, primarily due to the presence of impurities, particularly problematic for catalysts like sulphur. Nevertheless, various approaches rooted in the power-to-gas concept have been explored in the literature, including combustion regimes, top gas recycling, utilization of renewable gaseous fuels, and optimization of the injection location for renewable fuels. These avenues offer potential solutions to reduce the carbon footprint of steel production while addressing specific challenges inherent to the industry, such as impurity-laden environments. In the present work, five power-to-gas concepts have been integrated in a BF-BOF plant and modelled in Aspen Plus. A reference conventional plant of 320 tHM/h (hot metal per hour) has also been modelled for comparison purposes and validated with literature data. The low-carbon cases include: (i) amine-based carbon capture and methanation, (ii) pure oxygen injection instead of air (oxy-BF) added to the previous case, (iii) partial top gas recycling added to the previous case, (iv) direct methanation of the blast furnace gas and (v) direct injection of hydrogen in an oxy-BF. The comparative analysis has been performed in terms of key technical and economic parameters, related to fuel consumption rates (448-606 kgCoal/tHM), injection rates of synthetic reducing agents (54-202 kgSNG/tHM or 69 kgH2/tHM), rate of top gas recycling (270 kgTGR/tHM), CO2 emissions avoided (9-34%), unused steel gases (1827-4542 MJ/tHM), energy penalty (12-18 MJ/kgCO2), electrolyser size (355-1268 MW) and specific costs of CO2 avoidance (216-352 €/tCO2). The main conclusion is that case (iii), which performs partial top gas recycling with pure O2 injection and amine-based CO2 capture & methanation, emerges as the preferred option. Although it requires ASU for oxygen generation, it has a medium-low implementation costs (130 €/tHRC), the electrolyser size is relatively small compared with other cases (742 MW), it has lower energy penalty (12.0 MJ/kgCO2), the lowest CO2 avoidance costs (216 €/tCO2) and higher CO2 avoidance rate (-29%) compared with other configurations. This configuration can cut CO2 emissions from 1943 kgCO2/tHM to 1380 kgCO2/tHM (this translates to reducing 1440 ktCO2 annually for a plant of 320 tsteel/h). On a global scale (production 1.9 Gt/year) and assuming 70% BF-BOF route, it could potentially save 748 Mtons CO2 yearly. Reducing CO2 emissions in the steel industry is critical for fostering sustainable global development. This study underscores the significance of incorporating Carbon Capture and Utilization in high-emission industries. Ongoing research and future experimental initiatives in pilot plants are essential for validating these findings and advancing the industry towards a more environmentally friendly, greener and more resilient future.
- 1 January 2024
- Published by Elsevier in SSRN Electronic Journal
Open AccessTechno-economic Assessment and Comparison of Different Power-to-Gas Configurations with CCU in the Iron and Steel Industry
The iron and steel industry stands as a significant contributor to global carbon emissions. In current times, various decarbonization strategies are being explored to mitigate environmental impact. Asian producers mainly concentrate on integrating carbon capture and carbon recycling technologies into blast furnaces. On the other hand, European producers predominantly lean towards the adoption of hydrogen in direct reduction processes. While the latter approach holds promise in averting CO2 emissions during iron ore reduction, it is essential to note that these producers may still release CO2 through other plant processes. In the context of blast furnaces, both the consumption of coke (a fossil fuel) and the iron ore reduction process contribute to the generation of CO2. The blast furnace-basic oxygen furnace (BF-BOF) route presently dominates steel manufacturing, constituting over 70% of global production. Given its heavy reliance on coal and coke, this method stands out as one of the largest industrial emitters of greenhouse gases worldwide, emitting approximately 1.8-2.0 tons of CO2 per ton of steel and contributing to 7% of global CO2 emissions. To address such environmental challenges, the promotion of synthetic fuels through Carbon Capture and Utilization (CCU), leveraging the industry's own emissions in a carbon cycle, has gained traction. However, the implementation of processes like methanation for synthetic natural gas generation presents challenges in industries of this nature, primarily due to the presence of impurities, particularly problematic for catalysts like sulphur. Nevertheless, various approaches rooted in the power-to-gas concept have been explored in the literature, including combustion regimes, top gas recycling, utilization of renewable gaseous fuels, and optimization of the injection location for renewable fuels. These avenues offer potential solutions to reduce the carbon footprint of steel production while addressing specific challenges inherent to the industry, such as impurity-laden environments. In the present work, five power-to-gas concepts have been integrated in a BF-BOF plant and modelled in Aspen Plus. A reference conventional plant of 320 tHM/h (hot metal per hour) has also been modelled for comparison purposes and validated with literature data. The low-carbon cases include: (i) amine-based carbon capture and methanation, (ii) pure oxygen injection instead of air (oxy-BF) added to the previous case, (iii) partial top gas recycling added to the previous case, (iv) direct methanation of the blast furnace gas and (v) direct injection of hydrogen in an oxy-BF. The comparative analysis has been performed in terms of key technical and economic parameters, related to fuel consumption rates (448-606 kgCoal/tHM), injection rates of synthetic reducing agents (54-202 kgSNG/tHM or 69 kgH2/tHM), rate of top gas recycling (270 kgTGR/tHM), CO2 emissions avoided (9-34%), unused steel gases (1827-4542 MJ/tHM), energy penalty (12-18 MJ/kgCO2), electrolyser size (355-1268 MW) and specific costs of CO2 avoidance (216-352 €/tCO2). The main conclusion is that case (iii), which performs partial top gas recycling with pure O2 injection and amine-based CO2 capture & methanation, emerges as the preferred option. Although it requires ASU for oxygen generation, it has a medium-low implementation costs (130 €/tHRC), the electrolyser size is relatively small compared with other cases (742 MW), it has lower energy penalty (12.0 MJ/kgCO2), the lowest CO2 avoidance costs (216 €/tCO2) and higher CO2 avoidance rate (-29%) compared with other configurations. This configuration can cut CO2 emissions from 1943 kgCO2/tHM to 1380 kgCO2/tHM (this translates to reducing 1440 ktCO2 annually for a plant of 320 tsteel/h). On a global scale (production 1.9 Gt/year) and assuming 70% BF-BOF route, it could potentially save 748 Mtons CO2 yearly. Reducing CO2 emissions in the steel industry is critical for fostering sustainable global development. This study underscores the significance of incorporating Carbon Capture and Utilization in high-emission industries. Ongoing research and future experimental initiatives in pilot plants are essential for validating these findings and advancing the industry towards a more environmentally friendly, greener and more resilient future.
- Open Access
- 28 November 2023
- Published by Elsevier in Journal of CO2 Utilization
- Vol. 78
Power to gas and top gas recycling integration in an oxygen blast furnace steelmaking industry
- 28 November 2023
- Published by Elsevier in Journal of CO2 Utilization
- Vol. 78
Open AccessPower to gas and top gas recycling integration in an oxygen blast furnace steelmaking industry
- Open Access
- 4 September 2023
- Published by Elsevier in Energy Conversion and Management
- Vol. 295
Full oxygen blast furnace steelmaking: From direct hydrogen injection to methanized BFG injection
- 4 September 2023
- Published by Elsevier in Energy Conversion and Management
- Vol. 295
Open AccessFull oxygen blast furnace steelmaking: From direct hydrogen injection to methanized BFG injection