Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Dianta Ginting has a total of 106 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Enhanced microwave absorption in Ba0.6Sr0.4Fe12−xZnxO19 hexaferrites via impedance matching optimization for X-band radar applications

    by Maya Puspitasari Izaak, Henni Sitompul, Yana Taryana, Nanang Sudrajat, Jan Setiawan, Yunasfi Yunasfi, Mashadi Mashadi, Didin S. Winatapura, Wisnu Ari Adi, Tesalonika Siregar, et al.


  • Open Access

    Optimisation of microwave-assisted pyrolysis for biochar production from empty fruit bunches and palm kernel shell for controlled-release urea fertiliser

    by Wahidah Fatini Aidy, Atikah Ali, Nivasini Paramasivam, Jualang Azlan Gansau, Wei Hsiang Tan, Salumiah Mijin, Pak Yan Moh, Harry Lye Hin Chong, Dianta Ginting, Rubia Idris

  • Open Access

    Sustainable Corrosion Protection of Stainless Steel 316L in Marine Environment Using Electrophoretically Deposited Garlic Extract Green Inhibitor: Electrochemical and Surface Analysis

    by Ig. Ayu Arwati, Dianta Ginting, Dafit Feriyanto, Gian Villany Golwa, Popi Yuliarty, Kontan Tarigan, Stenlly Damar, Khuzaimah, Mashadi Mashadi

    The increasing demand for sustainable and environmentally friendly corrosion inhibitors has driven research toward green alternatives to conventional toxic inhibitors. This study investigates the corrosion protection performance of garlic extract (Allium sativum) as an eco-friendly green inhibitor for stainless steel 316L in 3.5% NaCl marine environment. The inhibition efficiency was evaluated using electrochemical potentiodynamic polarization techniques, complemented by comprehensive surface characterization through scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, electrochemical impedance spectroscopy (EIS), and cyclic voltammetry analysis. Electrophoretic deposition (EPD) was employed to apply garlic extract concentrations of 8, 10, and 12 mL onto SS316L specimens. Results demonstrated significant corrosion rate reduction from 0.0082732 mmpy (unprotected specimen) to 0.0014547 mmpy with 12 mL garlic extract treatment, achieving maximum inhibition efficiency of 82%. EIS revealed substantial increase in charge transfer resistance (>170 kΩ), while electrochemical analysis demonstrated mixed-type inhibition behavior with reduced corrosion current densities. SEM-EDX confirmed the formation of protective Fe2+-allicin complex layers on the metal surface, while Raman spectroscopy showed substantial reduction in corrosion products (a-Fe2O3 and y-FeOOH) formation. Cyclic voltammetry demonstrated a five-order-of-magnitude reduction in diffusion rate, confirming exceptional barrier properties. The superior performance is attributed to the chemisorption of sulfur and oxygen-containing compounds in allicin molecules onto active steel sites, forming stable protective films. This green inhibitor demonstrates excellent potential for sustainable corrosion protection in marine and industrial applications, offering an environmentally benign alternative to synthetic inhibitors.

  • Enhanced thermoelectric performance in Feâ‚‚CrAl1−2xNixSnx Heusler alloys through co-doping and electronic structure optimization

    by Dianta Ginting, Canda Lesmana Ginting, Kontan Tarigan, Mashadi Mashadi, Yunasfi Yunasfi, Toto Sudiro, Jan Setiawan, Tony Kristiantoro, Deni Purnomo, Jae-Hyun Yun, et al.

  • Magnetic phase transition and critical behavior of La0.7Ca0.3 MnO 3 -doped titanium compound

    by Dianta Ginting, Muhammad Rizky, Mashadi Mashadi

    Perovskite manganites have attracted considerable attention due to their remarkable magnetic and magnetoresistive properties, which are highly sensitive to chemical substitution and external parameters. Understanding the magnetic phase transition order and critical behavior in these materials is crucial for optimizing their functional properties and exploring fundamental magnetic interactions. In this study, we investigated the magnetic phase transition and critical behavior of the Ti-doped La[ ]Ca[ ]MnO 3 compound. A polycrystalline sample of La[ ]Ca[ ] Mn[ ]Ti[ ]O 3 was synthesized using the conventional solid-state reaction method. Isothermal magnetization measurements were performed using a vibrating sample magnetometer with applied magnetic fields ranging from 0 to 1 T at various temperatures around the Curie temperature. The critical behavior at the ferromagnetic-to-paramagnetic phase transition was analyzed using the modified Arrott plot, Kouvel–Fisher method, and critical isothermal analysis. The Banerjee criterion revealed that the magnetic transition in La[ ]Ca[ ]Mn[ ]Ti[ ]O 3 is second-order, contrasting with the first-order transition observed in the parent compound La[ ]Ca[ ]MnO 3 . The critical exponents were determined as [ ] (Curie temperature)[ ] [ ] [ ]129.66[ ]K, [ ], and [ ]. The [ ] value is consistent with mean-field theory predictions ([ ]), while [ ] approaches the three-dimensional Heisenberg model ([ ]). Scaling analysis of the magnetization data confirmed two distinct universal curves around [ ], validating the reliability of the obtained critical parameters. These findings demonstrate that Ti doping fundamentally alters the magnetic phase transition from first-order to second-order, attributed to weakened double-exchange interactions and induced local lattice distortions.


  • Open Access

    Significant Reduction in Lattice Thermal Conductivity of (PbTe)0.95 - (PbS)0.05 Thermoelectric Materials Through Liquid Silicon Quenching

    by Dianta Ginting, Ai Nurlela, Dwi Nanto, Mashadi, Toto Sudiro, Tony Kristiantoro, Jong-Soo Rhye

    Thermoelectric materials are game-changers, that have the ability to transform waste heat into electrical energy, making them a potential renewable energy solution to reduce reliance on fossil fuels. The standard metric for evaluating thermoelectric materials is the dimensionless figure of merit, ZT, which is markedly influenced by lattice thermal conductivity (ĸl ). Higher thermal transport through the lattice lowers the ZT value, reducing the material’s efficiency. Therefore, finding ways to decrease ????l is critical for boosting thermoelectric performance. In our research, we explored an innovative approach by applying a quenching technique using liquid silicon to reduce thermal conductivity (ĸT ) due to lattice vibrations. We compared the lattice conductivity (ĸl ) of materials with and without this liquid silicon quenching process. The results were striking: at 300 K, quenching lowers the lattice thermal conductivity by about 40.1 %, and at 800 K, it is still reduced by roughly 24.7%compared with pristine PbTe. Even more impressive, when compared to non-quenched (PbTe)0.95 − (PbS)0.05 alloys, at 300 K, the silicon-quenched sample attains an additional ĸl reduction of roughly 16.1 %, while at 800 K the extra decrease is about 13.0%. These findings highlight that liquid silicon quenching is a highly effective method for lowering ĸl of PbTe thermoelectric materials. This approach paves the way for developing next-generation thermoelectric materials that are more efficient, particularly for eco-friendly waste heat recovery applications. Our work opens new possibilities for sustainable energy innovation.

  • Open Access

    Engineering Ultra-Low Thermal Conductivity in (Pb0.8Ge0.2Te)0.95-x(PbSe)0.05(PbS)x Quaternary Lead Chalcogenides Through PbS-Induced Phase Segregation

    by Dianta Ginting, Hadi Pronoto, Nurato, Kontan Tarigan, Sagir Alva, Muhamad Fitri, Dwi Nanto, Ai Nurlaela, Mashadi, Yunasfi, et al.

    The shortage of tellurium and toxicity of lead are major obstacles to scaling mid-temperature thermoelectric generators. We engineer quaternary lead chalcogenides with composition (Pb0.8Ge0.2Te)0.95-x(PbSe)0.05(PbS)x (0 ≤ x ≤ 0.25), where Pb is lead, Ge is germanium, Te is tellurium, Se is selenium, S is sulfur, and x denotes the molar fraction of lead sulfide (PbS). The primary novelty lies in achieving ultra-low thermal conductivity through controlled phase segregation induced by systematic PbS incorporation. X-ray diffraction analysis reveals single-phase solid solutions up to x ≈ 0.10, with secondary PbS precipitates forming beyond this threshold. These PbS-rich phases create hierarchical microstructures that scatter phonons across multiple length scales, suppressing total thermal conductivity to 0.6 Wm−1K−1 at x = 0.15—approximately 84% lower than pristine lead telluride (PbTe) and approaching glass-like thermal conductivity values. Electrical transport measurements demonstrate sulfur’s role as an electron donor, enabling carrier-type control from p-type to n-type conduction. Despite moderate electrical power factors, the optimized composition (x = 0.20) achieves a peak dimensionless figure of merit ZT ≈ 0.34 at 650 K. This work demonstrates an effective strategy for tellurium-lean, lead-reduced thermoelectric materials through sulfur-induced phase segregation, providing practical design guidelines for sustainable waste heat recovery applications.


  • Open Access

    Correlation Analysis of Battery Capacity, Range, and Charging Time in Electric Vehicles Using Pearson Correlation and MATLAB Regression

    by Yasa Sanusi, Sri Pudjiwati, Kontan Tarigan, Dianta Ginting, Farrah Anis Fazliatun Adnan, Gerald Ensang Timuda, Nono Darsono, Nuwong Chollacoop, Deni Shidqi Khaerudini

    The increasing adoption of electric vehicles (EVs) reflects growing global awareness of climate change and air pollution challenges. As a sustainable alternative to conventional internal combustion vehicles, EVs produce zero tailpipe emissions and can significantly reduce carbon emissions—particularly when powered by renewable energy sources. However, one of the primary barriers to widespread EV adoption remains the high cost of battery components, which are essential to vehicle performance and energy storage. In Indonesia, two dominant battery types used in EVs are Lithium Ferro Phosphate (LFP) and Nickel Manganese Cobalt (NMC), each offering distinct advantages. LFP batteries are recognized for their thermal stability and longer life cycles, making them suitable for everyday use, while NMC batteries offer higher energy density and are preferred for performance-focused and long-distance applications. This study aims to evaluate the correlation between battery capacity, driving range, and charging time for LFP and NMC batteries using Pearson correlation and regression analysis through MATLAB simulation. The results indicate a strong and statistically significant correlation among the key parameters, with a Pearson coefficient of 0.576 for battery capacity and range, and an R-square value of 0.99 for the regression model, demonstrating high predictive accuracy. Furthermore, the analysis reveals that LFP batteries have a higher average energy efficiency of 7.53 km/kWh compared to 6.84 km/kWh for NMC batteries, indicating more consistent performance in energy usage. These findings offer valuable insights for optimizing battery selection in EV applications and contribute to strategic planning for the development of more efficient electric vehicle systems. The combination of statistical and simulation-based analysis provides a robust foundation for future research and policy-making in the field of electric mobility.


  • Open Access

    Fuel Efficiency Evaluation of Automatic Motorcycles in Indonesia Using MATLAB-Based Clustering

    by Eky Nur Fadhilla, Zelvia Monica, Farrah Anis Fazliatul Adnan, Jong Soo Rhee, Dianta Ginting

    The continuous rise in fuel prices in Indonesia has made fuel efficiency a crucial factor for consumers when selecting vehicles, particularly motorcycles. Automatic scooters with engine capacities below 160 cc have become increasingly popular in urban areas due to their fuel-saving benefits. This study aims to analyze the influence of engine capacity, vehicle weight, and engine torque on the fuel consumption of automatic scooters with engine capacities ranging from 109 cc to 156.9 cc. The study also considers additional performance parameters, including average fuel consumption, power output, and Power-to-Weight Ratio (PWR). Using statistical analysis and MATLAB-based modeling, the data were classified into three distinct clusters. Cluster 1 comprises scooters with engine capacities between 109 and 125 cc; Cluster 2 includes those with capacities between 150 and 160 cc; and Cluster 3 represents scooters with unique component specifications. The results show that Cluster 2 records the highest average maximum power output at 11.47 kW and torque at 14.25 Nm, while Cluster 1 has the lowest at 6.1 kW and 9.64 Nm, respectively. In terms of weight, Cluster 3 is the heaviest, averaging 129.33 kg, while Cluster 1 is the lightest at 96.14 kg. Fuel efficiency is highest in Cluster 1 at 55.3 km/l and lowest in Cluster 3 at 38.67 km/l. Comparative analysis using MATLAB confirms that scooters with lower engine capacities and weights tend to be more fuel-efficient, whereas higher engine capacities lead to increased torque, power, weight, and fuel consumption. These findings can guide consumers in selecting motorcycles that align with their usage needs and assist manufacturers in developing more efficient and high-performing scooters tailored to diverse market segments.

  • Open Access

    Spin-Density Wave, Unconventional Magnetic and Thermal Transport Properties in Sr2−x(PbCl2)xCu(BO3)2

    by Dianta Ginting, Bora Won, Jong-Soo Rhyee

    SrCu2(BO3)2 (Sr-122) has attracted considerable interest as a quasi-two-dimensional S = 1/2 Heisenberg antiferromagnetic spin system with a Shastry-Sutherland lattice (SSL) structure. It features a Cu2+ spin dimer ground state and exhibits intra-dimer Dzyaloshinskii–Moriya interactions, making Sr-122 a fascinating platform for studying quantum magnetic phenomena. In this study, we investigate the β-phase of SrCu2(BO3)2 (β-Sr-212), which retains the same spin structure as Sr-122, to explore how the carrier concentration affects the spin gap. Our results show that increasing the doping levels in SrCu2(BO3)2 modulates the magnetic properties and slightly suppresses the spin gap, offering new possibilities for tuning its quantum magnetic behavior.