Jafar Orangi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jafar Orangi has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Majid Beidaghi
University of Arizona
5 shared publications Majid Beidaghi
Auburn University
2 shared publications- Armin VahidMohammadi
Department of Materials Engineering, Auburn University, Auburn, AL, 36849, USA
1 shared publication D. Lin
1 shared publicationDavid Blersch
Biosystems Engineering, Auburn University
1 shared publicationE. Kayali
1 shared publication
Latest Publications
- Open Access
- 1 March 2021
- Published by Elsevier in Materials Today Advances
- Vol. 9
Conductive and highly compressible MXene aerogels with ordered microstructures as high-capacity electrodes for Li-ion capacitors
- 1 March 2021
- Published by Elsevier in Materials Today Advances
- Vol. 9
Open AccessConductive and highly compressible MXene aerogels with ordered microstructures as high-capacity electrodes for Li-ion capacitors
- 9 August 2020
- Published by Wiley in Advanced Functional Materials
- Vol. 30 (47) , 2005305
A Review of the Effects of Electrode Fabrication and Assembly Processes on the Structure and Electrochemical Performance of 2D MXenes
MXenes are 2D materials with relatively high surface areas, high electrical conductivities, functional transition metal surfaces, tunable surface chemistries, and solution processability. Due to these properties, 2D MXenes have attracted widespread attention as electrode materials for energy storage devices, including electrochemical capacitors, with high power and energy densities. However, many studies have shown that the electrochemical performance of MXene electrodes is considerably affected by their structure and morphology. These properties are, for the most part, controlled by the method used for the assembly of 2D MXene flakes and the electrode fabrication methods. A successful electrode assembly and fabrication method should address several challenges, such as the restacking of 2D flakes, to achieve electrode structures and morphologies that deliver high ionic transport properties, electrical conductivity, and mechanical stability. This review aims to provide insight into the current state‐of‐the‐art assembly and fabrication methods used to design and fabricate high performance electrodes based on MXenes. The major challenges to be addressed and possible future directions in the fabrication of MXene electrodes for practical energy storage applications are highlighted.
- 9 August 2020
- Published by Wiley in Advanced Functional Materials
- Vol. 30 (47) , 2005305
A Review of the Effects of Electrode Fabrication and Assembly Processes on the Structure and Electrochemical Performance of 2D MXenes
MXenes are 2D materials with relatively high surface areas, high electrical conductivities, functional transition metal surfaces, tunable surface chemistries, and solution processability. Due to these properties, 2D MXenes have attracted widespread attention as electrode materials for energy storage devices, including electrochemical capacitors, with high power and energy densities. However, many studies have shown that the electrochemical performance of MXene electrodes is considerably affected by their structure and morphology. These properties are, for the most part, controlled by the method used for the assembly of 2D MXene flakes and the electrode fabrication methods. A successful electrode assembly and fabrication method should address several challenges, such as the restacking of 2D flakes, to achieve electrode structures and morphologies that deliver high ionic transport properties, electrical conductivity, and mechanical stability. This review aims to provide insight into the current state‐of‐the‐art assembly and fabrication methods used to design and fabricate high performance electrodes based on MXenes. The major challenges to be addressed and possible future directions in the fabrication of MXene electrodes for practical energy storage applications are highlighted.
- 31 December 2019
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 14 (1) , 640-650
3D Printing of Additive-Free 2D Ti3C2Tx (MXene) Ink for Fabrication of Micro-Supercapacitors with Ultra-High Energy Densities
Recent advances in the development of self-powered devices and miniaturized electronics have increased the demand for on-chip energy storage devices that can deliver high power and energy densities in a limited footprint area. Here, we report the fabrication of all-solid-state micro-supercapacitors (MSCs) through a three-dimensional (3D) printing of additive-free and water-based MXene ink. The fabricated MSCs benefit from the high electrical conductivity and excellent electrochemical properties of two-dimensional (2D) Ti3C2Tx MXene and a 3D interdigital electrode architecture to deliver high areal and volumetric energy densities. We demonstrate that a highly concentrated MXene ink shows desirable viscoelastic properties for extrusion printing at room temperature and therefore can be used for scalable fabrication of MSCs with various architectures and electrode thicknesses on a variety of substrates. The developed printing process can be readily used for the fabrication of flexible MSCs on polymer and paper substrates. The printed solid-state devices show unprecedented electrochemical performances with very high areal capacitances of up to ~1035 mF cm-2. Our study introduces Ti3C2Tx MXene as an excellent choice of electrode material for fabrication of 3D MSCs and, demonstrates 3D printing of MXene inks at room temperature.
- 31 December 2019
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 14 (1) , 640-650
3D Printing of Additive-Free 2D Ti3C2Tx (MXene) Ink for Fabrication of Micro-Supercapacitors with Ultra-High Energy Densities
Recent advances in the development of self-powered devices and miniaturized electronics have increased the demand for on-chip energy storage devices that can deliver high power and energy densities in a limited footprint area. Here, we report the fabrication of all-solid-state micro-supercapacitors (MSCs) through a three-dimensional (3D) printing of additive-free and water-based MXene ink. The fabricated MSCs benefit from the high electrical conductivity and excellent electrochemical properties of two-dimensional (2D) Ti3C2Tx MXene and a 3D interdigital electrode architecture to deliver high areal and volumetric energy densities. We demonstrate that a highly concentrated MXene ink shows desirable viscoelastic properties for extrusion printing at room temperature and therefore can be used for scalable fabrication of MSCs with various architectures and electrode thicknesses on a variety of substrates. The developed printing process can be readily used for the fabrication of flexible MSCs on polymer and paper substrates. The printed solid-state devices show unprecedented electrochemical performances with very high areal capacitances of up to ~1035 mF cm-2. Our study introduces Ti3C2Tx MXene as an excellent choice of electrode material for fabrication of 3D MSCs and, demonstrates 3D printing of MXene inks at room temperature.
- 1 September 2019
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2019-02 (4) , 183
3D Printed MXene Micro-Supercapacitors with Ultra-High Energy Density
Small scale energy storage devices are expected to play a significant role in the future advances of portable electronics, wireless sensors, and multifunctional micro/nanosystems. A crucial requirement for the fabrication of energy storage devices with high energy and power densities is using electrode materials with superior electrochemical properties. Another important requirement is the assembly of the electrode materials into structures that promote high ionic and electronic conductivities. In this talk, we report a scalable printing method for fabrication of on-chip three-dimensional (3D) micro-supercapacitors based on a class of 2D transition metal carbides called MXenes as electrode materials. MXenes offer high electronic conductivity and high specific capacitance and therefore, have attracted much interest as high-performance electrode materials for supercapacitors. In our work, the fabrication of MXene electrodes and device assembly is achieved using an extrusion-based 3D printing process that uses viscoelastic water-based MXene ink. A programmable printing machine was used in the printing process which involved layer-by-layer deposition of the MXene ink to fabricate the 3D electrodes. The developed printing method allows rapid fabrication of micro-supercapacitors on a variety of substrates, while electrode height can be controlled by the number of deposited layers. All-solid-state devices printed on flexible substrates showed excellent electrochemical performances under different bending conditions and delivered extremely high areal capacitances (over 1035 mF cm-2). Our study suggests that due to its high electronic conductivity and electrochemical properties, MXene is an excellent electrode material for the fabrication of 3D energy storage devices
- 1 September 2019
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2019-02 (4) , 183
3D Printed MXene Micro-Supercapacitors with Ultra-High Energy Density
Small scale energy storage devices are expected to play a significant role in the future advances of portable electronics, wireless sensors, and multifunctional micro/nanosystems. A crucial requirement for the fabrication of energy storage devices with high energy and power densities is using electrode materials with superior electrochemical properties. Another important requirement is the assembly of the electrode materials into structures that promote high ionic and electronic conductivities. In this talk, we report a scalable printing method for fabrication of on-chip three-dimensional (3D) micro-supercapacitors based on a class of 2D transition metal carbides called MXenes as electrode materials. MXenes offer high electronic conductivity and high specific capacitance and therefore, have attracted much interest as high-performance electrode materials for supercapacitors. In our work, the fabrication of MXene electrodes and device assembly is achieved using an extrusion-based 3D printing process that uses viscoelastic water-based MXene ink. A programmable printing machine was used in the printing process which involved layer-by-layer deposition of the MXene ink to fabricate the 3D electrodes. The developed printing method allows rapid fabrication of micro-supercapacitors on a variety of substrates, while electrode height can be controlled by the number of deposited layers. All-solid-state devices printed on flexible substrates showed excellent electrochemical performances under different bending conditions and delivered extremely high areal capacitances (over 1035 mF cm-2). Our study suggests that due to its high electronic conductivity and electrochemical properties, MXene is an excellent electrode material for the fabrication of 3D energy storage devices
- 25 July 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (31) , 25949-25954
Controlling the Dimensions of 2D MXenes for Ultrahigh-Rate Pseudocapacitive Energy Storage
The capacitive properties of two-dimensional (2D) transition metal carbides/nitrides (MXenes) have been the focus of much research in recent years. MXenes store charge by the pseudocapacitance mechanism (fast surface redox reactions) but can deliver their stored charge at much higher rates compared to other pseudocapacitive materials. Herein, the dependence of the electrochemical properties of MXenes on their lateral dimensions is reported. We show that synthesizing MXenes with controlled dimensions enables the design and fabrication of electrodes with high electronic and ionic conductivities. At low scan rates, electrodes fabricated using a mixture of small and large flakes could deliver very high specific gravimetric and volumetric capacitances of about 435 Fg-1 and 1513 Fcm-3, respectively. At a very high scan rate of 10 Vs-1, the performance of the electrodes remained capacitive, demonstrating their ultra-high-rate energy storage capability. This work outlines an effective method for the design and fabrication of MXene electrodes with high energy and power densities.
- 25 July 2018
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 10 (31) , 25949-25954
Controlling the Dimensions of 2D MXenes for Ultrahigh-Rate Pseudocapacitive Energy Storage
The capacitive properties of two-dimensional (2D) transition metal carbides/nitrides (MXenes) have been the focus of much research in recent years. MXenes store charge by the pseudocapacitance mechanism (fast surface redox reactions) but can deliver their stored charge at much higher rates compared to other pseudocapacitive materials. Herein, the dependence of the electrochemical properties of MXenes on their lateral dimensions is reported. We show that synthesizing MXenes with controlled dimensions enables the design and fabrication of electrodes with high electronic and ionic conductivities. At low scan rates, electrodes fabricated using a mixture of small and large flakes could deliver very high specific gravimetric and volumetric capacitances of about 435 Fg-1 and 1513 Fcm-3, respectively. At a very high scan rate of 10 Vs-1, the performance of the electrodes remained capacitive, demonstrating their ultra-high-rate energy storage capability. This work outlines an effective method for the design and fabrication of MXene electrodes with high energy and power densities.
- 13 April 2018
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2018-01 (1) , 157
Assembling 2D Mxene into 3D Ordered Structures for High Power Li-Ion Capacitors
MXenes are a family of two-dimensional (2D) materials with interesting electrical and electrochemical properties and their high potential as electrode materials for Li-ion capacitors has been recently demonstrated. However, the conventional methods for electrode assembly and device fabrication are limiting factors in exploiting the full potential of these electrode materials. The research on the development of electrochemical energy storage devices in the past few years has led to the realization that improved performance can be achieved by assembling the electrode materials into three-dimensional (3D) architectures instead of the conventional 2D “laminate” architecture. In this talk, we present a simple, efficient, and scalable method to assemble 2D Ti3C2 into ordered 3D and porous aerogel structures with high specific capacitances and rate capabilities. MXenes aerogels are fabricated by directional freeze casting and show large specific surface areas. The porous structure of MXene aerogels is dependent on the processing conditions and affect their mechanical and electrochemical properties. MXene aerogels show significantly high specific capacities (1200 mAh/g at 0.05 A/g), excellent rate capability (200 mAh/g at 10 A/g) and outstanding cycling performance for reversible lithium-ion energy storage. We believe that the fabricated 3D MXene structures are promising for a broad range of applications.
- 13 April 2018
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2018-01 (1) , 157
Assembling 2D Mxene into 3D Ordered Structures for High Power Li-Ion Capacitors
MXenes are a family of two-dimensional (2D) materials with interesting electrical and electrochemical properties and their high potential as electrode materials for Li-ion capacitors has been recently demonstrated. However, the conventional methods for electrode assembly and device fabrication are limiting factors in exploiting the full potential of these electrode materials. The research on the development of electrochemical energy storage devices in the past few years has led to the realization that improved performance can be achieved by assembling the electrode materials into three-dimensional (3D) architectures instead of the conventional 2D “laminate” architecture. In this talk, we present a simple, efficient, and scalable method to assemble 2D Ti3C2 into ordered 3D and porous aerogel structures with high specific capacitances and rate capabilities. MXenes aerogels are fabricated by directional freeze casting and show large specific surface areas. The porous structure of MXene aerogels is dependent on the processing conditions and affect their mechanical and electrochemical properties. MXene aerogels show significantly high specific capacities (1200 mAh/g at 0.05 A/g), excellent rate capability (200 mAh/g at 10 A/g) and outstanding cycling performance for reversible lithium-ion energy storage. We believe that the fabricated 3D MXene structures are promising for a broad range of applications.
- 1 September 2017
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2017-02 (56) , 2343
Development and Optimization of Capacitive Deionization for Treatment of High-Strength Agricultural Waters
Desalination technologies are expected to play an important role in producing clean water in the future, resulting a surge in the research and development of energy efficient and cost effective technologies for desalination of seawater and brackish water. Membrane-based desalination technologies such as reverse osmosis (RO) are the most commercially used desalination methods for seawater and treatment of agricultural water, but are highly energy intensive and the future development of desalination is dependent on finding more energy efficient technologies. Capacitive deionization (CDI) is an emerging technology for water desalination, and is based on the phenomenon of ion electrosorption. Simple CDI is an energy efficient technology and its applications for desalination of low molar concentration streams, like brackish water, is demonstrated. However, to expand the applications, research is focused on improving the efficiency and salt removal capacity of CDI systems. To this end, the important requirements are finding electrode materials with higher capacities and CDI systems with higher efficiencies. Also, the large-scale application of CDI for personal and industrial applications is dependent on designing CDI systems with potential to be implemented at different capacities and length scales. In this work, we have studied the CDI for removal of salt and nutrients from agricultural water. Various high surface area electrode materials were considered and the efficiency of CDI for removal is measured via downstream analyses on batch experiments and reported, allowing development of preliminary parameters for optimizing CDI systems for high-strength agricultural wastewaters.
- 1 September 2017
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2017-02 (56) , 2343
Development and Optimization of Capacitive Deionization for Treatment of High-Strength Agricultural Waters
Desalination technologies are expected to play an important role in producing clean water in the future, resulting a surge in the research and development of energy efficient and cost effective technologies for desalination of seawater and brackish water. Membrane-based desalination technologies such as reverse osmosis (RO) are the most commercially used desalination methods for seawater and treatment of agricultural water, but are highly energy intensive and the future development of desalination is dependent on finding more energy efficient technologies. Capacitive deionization (CDI) is an emerging technology for water desalination, and is based on the phenomenon of ion electrosorption. Simple CDI is an energy efficient technology and its applications for desalination of low molar concentration streams, like brackish water, is demonstrated. However, to expand the applications, research is focused on improving the efficiency and salt removal capacity of CDI systems. To this end, the important requirements are finding electrode materials with higher capacities and CDI systems with higher efficiencies. Also, the large-scale application of CDI for personal and industrial applications is dependent on designing CDI systems with potential to be implemented at different capacities and length scales. In this work, we have studied the CDI for removal of salt and nutrients from agricultural water. Various high surface area electrode materials were considered and the efficiency of CDI for removal is measured via downstream analyses on batch experiments and reported, allowing development of preliminary parameters for optimizing CDI systems for high-strength agricultural wastewaters.