Chong Xiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Chong Xiao has a total of 229 co-authors. Here are the top co-authors by number of shared publications:
- Yi Xie
University of Science & Technology of China
60 shared publications Wei Bai
19 shared publicationsYi Xie
Hefei National Research Center for Physical Sciences at the Microscale University of Science and Technology of China Hefei Anhui 230026 P. R. China
15 shared publicationsZhou Li
School of Materials Science and Engineering
14 shared publicationsBangjiao Ye
State Key Laboratory of Particle Detection and Electronics, University of Science and Technology of China, Hefei, Anhui 230026, P. R. China
12 shared publicationsKun Li
Hefei National Laboratory for Physical Sciences at the Microscale CAS Center for Excellence in Nanoscience, iCHEM University of Science and Technology of China Hefei Anhui 230026 P. R. China
10 shared publications
Latest Publications
- 5 November 2026
- Published by Wiley in Angewandte Chemie International Edition
Heterometallic Polarization Enabling Precise Intermediate Regulation for Selective CO 2 Photoreduction
Achieving high selectivity in photocatalytic CO 2 reduction remains a fundamental challenge, as competing pathways share similar thermodynamic potentials but differ in their intermediate adsorption behavior. Here we introduce a heterometallic polarization strategy based on bimetallic metal–organic frameworks (MOFs), where asymmetric charge redistribution between distinct metal centers tailors the local electronic structure and modulates CO* binding energetics. Taking MIL‐88A(Fe/Ni) as a model system, the incorporation of Ni induces intermetallic electronic coupling, creating polarized Fe─Ni sites that synergistically enhance CO 2 activation and charge transfer. As a result, MIL‐88A(Fe/Ni 2.5 ) achieves a CO production rate of 1517.4 µmol g −1 h −1 —10.8 times higher than MIL‐88A(Fe/Ni 0 )—with a selectivity of 97.9%. Increasing the Ni content strengthens CO* adsorption, thereby steering the reaction from CO evolution to deep hydrogenation toward CH 4 . MIL‐88A(Fe/Ni 7.5 ) delivers a CH 4 production rate of 255.0 µmol g −1 h −1 —28.3 and 14.5 times that of MIL‐88A(Fe/Ni 0 ) and MIL‐88A(Fe/Ni 2.5 ), respectively—with an electron selectivity of 81.3%. These results demonstrate that heterometallic polarization provides a powerful design principle for regulating intermediates and achieving tunable product selectivity in photocatalytic CO 2 conversion.
- 5 November 2026
- Published by Wiley in Angewandte Chemie International Edition
Heterometallic Polarization Enabling Precise Intermediate Regulation for Selective CO 2 Photoreduction
Achieving high selectivity in photocatalytic CO 2 reduction remains a fundamental challenge, as competing pathways share similar thermodynamic potentials but differ in their intermediate adsorption behavior. Here we introduce a heterometallic polarization strategy based on bimetallic metal–organic frameworks (MOFs), where asymmetric charge redistribution between distinct metal centers tailors the local electronic structure and modulates CO* binding energetics. Taking MIL‐88A(Fe/Ni) as a model system, the incorporation of Ni induces intermetallic electronic coupling, creating polarized Fe─Ni sites that synergistically enhance CO 2 activation and charge transfer. As a result, MIL‐88A(Fe/Ni 2.5 ) achieves a CO production rate of 1517.4 µmol g −1 h −1 —10.8 times higher than MIL‐88A(Fe/Ni 0 )—with a selectivity of 97.9%. Increasing the Ni content strengthens CO* adsorption, thereby steering the reaction from CO evolution to deep hydrogenation toward CH 4 . MIL‐88A(Fe/Ni 7.5 ) delivers a CH 4 production rate of 255.0 µmol g −1 h −1 —28.3 and 14.5 times that of MIL‐88A(Fe/Ni 0 ) and MIL‐88A(Fe/Ni 2.5 ), respectively—with an electron selectivity of 81.3%. These results demonstrate that heterometallic polarization provides a powerful design principle for regulating intermediates and achieving tunable product selectivity in photocatalytic CO 2 conversion.
- 5 November 2026
- Published by Wiley in Angewandte Chemie
Heterometallic Polarization Enabling Precise Intermediate Regulation for Selective CO 2 Photoreduction
Achieving high selectivity in photocatalytic CO 2 reduction remains a fundamental challenge, as competing pathways share similar thermodynamic potentials but differ in their intermediate adsorption behavior. Here we introduce a heterometallic polarization strategy based on bimetallic metal–organic frameworks (MOFs), where asymmetric charge redistribution between distinct metal centers tailors the local electronic structure and modulates CO* binding energetics. Taking MIL‐88A(Fe/Ni) as a model system, the incorporation of Ni induces intermetallic electronic coupling, creating polarized Fe─Ni sites that synergistically enhance CO 2 activation and charge transfer. As a result, MIL‐88A(Fe/Ni 2.5 ) achieves a CO production rate of 1517.4 µmol g −1 h −1 —10.8 times higher than MIL‐88A(Fe/Ni 0 )—with a selectivity of 97.9%. Increasing the Ni content strengthens CO* adsorption, thereby steering the reaction from CO evolution to deep hydrogenation toward CH 4 . MIL‐88A(Fe/Ni 7.5 ) delivers a CH 4 production rate of 255.0 µmol g −1 h −1 —28.3 and 14.5 times that of MIL‐88A(Fe/Ni 0 ) and MIL‐88A(Fe/Ni 2.5 ), respectively—with an electron selectivity of 81.3%. These results demonstrate that heterometallic polarization provides a powerful design principle for regulating intermediates and achieving tunable product selectivity in photocatalytic CO 2 conversion.
- 5 November 2026
- Published by Wiley in Angewandte Chemie
Heterometallic Polarization Enabling Precise Intermediate Regulation for Selective CO 2 Photoreduction
Achieving high selectivity in photocatalytic CO 2 reduction remains a fundamental challenge, as competing pathways share similar thermodynamic potentials but differ in their intermediate adsorption behavior. Here we introduce a heterometallic polarization strategy based on bimetallic metal–organic frameworks (MOFs), where asymmetric charge redistribution between distinct metal centers tailors the local electronic structure and modulates CO* binding energetics. Taking MIL‐88A(Fe/Ni) as a model system, the incorporation of Ni induces intermetallic electronic coupling, creating polarized Fe─Ni sites that synergistically enhance CO 2 activation and charge transfer. As a result, MIL‐88A(Fe/Ni 2.5 ) achieves a CO production rate of 1517.4 µmol g −1 h −1 —10.8 times higher than MIL‐88A(Fe/Ni 0 )—with a selectivity of 97.9%. Increasing the Ni content strengthens CO* adsorption, thereby steering the reaction from CO evolution to deep hydrogenation toward CH 4 . MIL‐88A(Fe/Ni 7.5 ) delivers a CH 4 production rate of 255.0 µmol g −1 h −1 —28.3 and 14.5 times that of MIL‐88A(Fe/Ni 0 ) and MIL‐88A(Fe/Ni 2.5 ), respectively—with an electron selectivity of 81.3%. These results demonstrate that heterometallic polarization provides a powerful design principle for regulating intermediates and achieving tunable product selectivity in photocatalytic CO 2 conversion.
- 13 March 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Dual-Antisite Defects and Domain Structures Synergistically Boosting a Record-High ZT > 2.0 in Chalcopyrite Cu 0.7 Ag 0.3 Ga 1– x In x Te 2 ( x = 0–0.5)
Antisite defects, as intrinsic point defects in crystals, have demonstrated significant potential in optimizing the thermoelectric performance of materials, particularly by modulating the carrier concentration. However, they typically degrade carrier mobility due to the strong coupling among thermoelectric parameters. To address this limitation, we propose a dual-antisite defects strategy: by introducing donor–acceptor defect pairs to form electrically neutral configurations, carrier scattering can be significantly reduced due to charge compensation. Meanwhile, the presence of these point defects still maintains strong phonon scattering. This approach minimizes the loss of electrical mobility while effectively suppressing lattice thermal conductivity (κL). Using chalcopyrite CuGaTe2 as a matrix, we incorporated charge-balanced dual-antisite defects (AgGa″ and InCu··) via alloying. This type of electrically neutral dual-antisite defects can maintain carrier mobility while increasing carrier concentration and significantly suppresses κL by enhancing phonon scattering through the interaction between alloy disorder scattering induced by In alloying and nanodomains. Remarkably, in Cu0.7Ag0.3Ga0.6In0.4Te2, a record-high ZT value of 2.03 at 873 K was achieved. This dual-antisite defects strategy provides a new paradigm for defect engineering in thermoelectric materials, enabling the simultaneous optimization of electrical and thermal transport properties and offering a valid pathway toward high-performance thermoelectrics.
- 13 March 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
Dual-Antisite Defects and Domain Structures Synergistically Boosting a Record-High ZT > 2.0 in Chalcopyrite Cu 0.7 Ag 0.3 Ga 1– x In x Te 2 ( x = 0–0.5)
Antisite defects, as intrinsic point defects in crystals, have demonstrated significant potential in optimizing the thermoelectric performance of materials, particularly by modulating the carrier concentration. However, they typically degrade carrier mobility due to the strong coupling among thermoelectric parameters. To address this limitation, we propose a dual-antisite defects strategy: by introducing donor–acceptor defect pairs to form electrically neutral configurations, carrier scattering can be significantly reduced due to charge compensation. Meanwhile, the presence of these point defects still maintains strong phonon scattering. This approach minimizes the loss of electrical mobility while effectively suppressing lattice thermal conductivity (κL). Using chalcopyrite CuGaTe2 as a matrix, we incorporated charge-balanced dual-antisite defects (AgGa″ and InCu··) via alloying. This type of electrically neutral dual-antisite defects can maintain carrier mobility while increasing carrier concentration and significantly suppresses κL by enhancing phonon scattering through the interaction between alloy disorder scattering induced by In alloying and nanodomains. Remarkably, in Cu0.7Ag0.3Ga0.6In0.4Te2, a record-high ZT value of 2.03 at 873 K was achieved. This dual-antisite defects strategy provides a new paradigm for defect engineering in thermoelectric materials, enabling the simultaneous optimization of electrical and thermal transport properties and offering a valid pathway toward high-performance thermoelectrics.
- 16 February 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (8) , 8812-8822
Enriching Local Reaction Fields via Ordered Multidimensional Interfaces for High-Yield Urea Electrosynthesis
Electrochemical urea (CO(NH2)2) synthesis using CO2 and available nitrogen sources is an alternative method featuring reactant sustainability and an overall energy efficiency. However, sluggish catalytic reaction kinetics for available electrocatalysts led to poor yield rates of urea production, seriously hindering its practical applications, because of the low density of reactant species and electric fields surrounding active sites. Herein, a new class of ordered multidimensional interfaces for electrocatalysts is discovered to enrich the local reaction fields surrounding active sites, thereby facilitating reaction kinetics for urea synthesis with ultrahigh yield rates. Using Cu-based electrocatalysts as a proof of concept, one-dimensional (1D) Cu2O nanowires were uniformly aligned along the 3-fold symmetry of two-dimensional (2D) Cu2Se (111) facets through in situ electrochemical epitaxial growth. This unique structure allows for accumulation of gas flows, electric fields, and species concentrations due to the interface confinement effect from multidimensions. Our Cu2O/Cu2Se interfaces yield a high current density, with a Faraday efficiency (FE) of 61.5% and a production rate of 0.96 mg h-1 in half cells, representing the highest reported values. Moreover, the designed membrane electrode assembly (MEA) coelectrolysis device demonstrates effective urea synthesis and plastic upcycling for practical applications. Enriching local reaction fields via ordered multidimensional interfaces can enable new strategies for designing efficient electrocatalysts and promoting reaction kinetics for practical applications.
- 16 February 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (8) , 8812-8822
Enriching Local Reaction Fields via Ordered Multidimensional Interfaces for High-Yield Urea Electrosynthesis
Electrochemical urea (CO(NH2)2) synthesis using CO2 and available nitrogen sources is an alternative method featuring reactant sustainability and an overall energy efficiency. However, sluggish catalytic reaction kinetics for available electrocatalysts led to poor yield rates of urea production, seriously hindering its practical applications, because of the low density of reactant species and electric fields surrounding active sites. Herein, a new class of ordered multidimensional interfaces for electrocatalysts is discovered to enrich the local reaction fields surrounding active sites, thereby facilitating reaction kinetics for urea synthesis with ultrahigh yield rates. Using Cu-based electrocatalysts as a proof of concept, one-dimensional (1D) Cu2O nanowires were uniformly aligned along the 3-fold symmetry of two-dimensional (2D) Cu2Se (111) facets through in situ electrochemical epitaxial growth. This unique structure allows for accumulation of gas flows, electric fields, and species concentrations due to the interface confinement effect from multidimensions. Our Cu2O/Cu2Se interfaces yield a high current density, with a Faraday efficiency (FE) of 61.5% and a production rate of 0.96 mg h-1 in half cells, representing the highest reported values. Moreover, the designed membrane electrode assembly (MEA) coelectrolysis device demonstrates effective urea synthesis and plastic upcycling for practical applications. Enriching local reaction fields via ordered multidimensional interfaces can enable new strategies for designing efficient electrocatalysts and promoting reaction kinetics for practical applications.
- Open Access
- 1 January 2026
- Published by Journal of University of Science and Technology of China in JUSTC
- Vol. 56 (6)
Synergistic Optimization of Mobility and Effective Mass by Sn Alloying Leads to Enhanced Thermoelectric Performance in Cu2GeSe3
- 1 January 2026
- Published by Journal of University of Science and Technology of China in JUSTC
- Vol. 56 (6)
Open AccessSynergistic Optimization of Mobility and Effective Mass by Sn Alloying Leads to Enhanced Thermoelectric Performance in Cu2GeSe3
- Open Access
- 21 October 2025
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 122 (43)
Dual-site cooperation for synergistic optimization of the band structure and spin state to facilitate C–N coupling reaction
The emerging electrocatalytic C–N coupling reaction provides an attractive route toward green urea synthesis, but a lack of in-depth insight into the catalytic mechanism and the geometric/electronic configurations that determine the key C- and N-coupling intermediates formation hampers the exploration of efficient catalysts. Herein, we design a bimetallic oxide (Fe-Mo-O) with dual active sites of Fe and Mo for the adsorption and activation of NO 2 − and CO 2 , respectively. Constructing dual-metal catalyst leads to an upshift of the d-band center and the generation of an intermediate-spin Fe center, which not only favors the selective conversion of *CO 2 into the key intermediate *CO on Mo sites, but also facilitates the adsorption and reduction of NO 2 − on Fe sites. Operando characterizations and theoretical calculations together elucidate that urea generation is associated with the formation of *CONH 2 intermediate by coupling *CO and *NH 2 on the alternating Mo and intermediate-spin Fe active sites, ultimately synergistically lowering the C–N coupling energy barrier. Specifically, the Fe-Mo-O catalyst delivers a high urea yield rate of 681.8 μg h −1 mg −1 cat. and an excellent Faradaic efficiency of 60% at −0.5 V (vs. RHE). Furthermore, a C–N coupling paired with a glycerol oxidation system allows for energy-saving electrochemical coproduction of urea and formic acid. Our findings offer a feasible strategy to develop cutting-edge electrocatalysts for urea synthesis by active site design and electronic structure regulation.
- 21 October 2025
- Published by National Academy of Sciences in Proceedings of the National Academy of Sciences
- Vol. 122 (43)
Open AccessDual-site cooperation for synergistic optimization of the band structure and spin state to facilitate C–N coupling reaction
The emerging electrocatalytic C–N coupling reaction provides an attractive route toward green urea synthesis, but a lack of in-depth insight into the catalytic mechanism and the geometric/electronic configurations that determine the key C- and N-coupling intermediates formation hampers the exploration of efficient catalysts. Herein, we design a bimetallic oxide (Fe-Mo-O) with dual active sites of Fe and Mo for the adsorption and activation of NO 2 − and CO 2 , respectively. Constructing dual-metal catalyst leads to an upshift of the d-band center and the generation of an intermediate-spin Fe center, which not only favors the selective conversion of *CO 2 into the key intermediate *CO on Mo sites, but also facilitates the adsorption and reduction of NO 2 − on Fe sites. Operando characterizations and theoretical calculations together elucidate that urea generation is associated with the formation of *CONH 2 intermediate by coupling *CO and *NH 2 on the alternating Mo and intermediate-spin Fe active sites, ultimately synergistically lowering the C–N coupling energy barrier. Specifically, the Fe-Mo-O catalyst delivers a high urea yield rate of 681.8 μg h −1 mg −1 cat. and an excellent Faradaic efficiency of 60% at −0.5 V (vs. RHE). Furthermore, a C–N coupling paired with a glycerol oxidation system allows for energy-saving electrochemical coproduction of urea and formic acid. Our findings offer a feasible strategy to develop cutting-edge electrocatalysts for urea synthesis by active site design and electronic structure regulation.
- 20 September 2025
- Published by Wiley in Advanced Materials
- Vol. 38 (2) , e12801
Octahedral Twisting‐Mediated van der Waals Stacking Induces Ultralow Thermal Conductivity
Low thermal conductivity ( κ ) is an important physical parameter inherent to all solids, and the quest for intrinsic ultralow‐ κ solids is one of the key scientific issues. Material design based on functional units can achieve control over lattice and phonon dynamics, and it is proposed that asymmetric structural units‐mediated van der Waals stacking can collectively lead to the low thermal conductivity. Herein, a novel van der Waals material In 2 G 2 Se₆ is reported, in which the distorted InSe₆ octahedron forms monolayers in conjunction with Ge 2 Se₆ dimers, which are further stacked along the c ‐axis via weak metavalent bonding. The distorted octahedron and van der Waals stacking result in large anharmonicity and ultrasoft acoustic phonon along Γ – Z direction, respectively. Consequently, In 2 Ge 2 Se 6 exhibits ultralow out‐of‐plane thermal conductivity, κ out‐of‐plane ≈0.2 W m −1 K −1 at 600 K. This study establishes a model for phonon physics that simultaneously enhances phonon‐phonon scattering and lowers the phonon group velocity, revealing the great potential of functional‐unit‐based material design for low‐ κ solids.
- 20 September 2025
- Published by Wiley in Advanced Materials
- Vol. 38 (2) , e12801
Octahedral Twisting‐Mediated van der Waals Stacking Induces Ultralow Thermal Conductivity
Low thermal conductivity ( κ ) is an important physical parameter inherent to all solids, and the quest for intrinsic ultralow‐ κ solids is one of the key scientific issues. Material design based on functional units can achieve control over lattice and phonon dynamics, and it is proposed that asymmetric structural units‐mediated van der Waals stacking can collectively lead to the low thermal conductivity. Herein, a novel van der Waals material In 2 G 2 Se₆ is reported, in which the distorted InSe₆ octahedron forms monolayers in conjunction with Ge 2 Se₆ dimers, which are further stacked along the c ‐axis via weak metavalent bonding. The distorted octahedron and van der Waals stacking result in large anharmonicity and ultrasoft acoustic phonon along Γ – Z direction, respectively. Consequently, In 2 Ge 2 Se 6 exhibits ultralow out‐of‐plane thermal conductivity, κ out‐of‐plane ≈0.2 W m −1 K −1 at 600 K. This study establishes a model for phonon physics that simultaneously enhances phonon‐phonon scattering and lowers the phonon group velocity, revealing the great potential of functional‐unit‐based material design for low‐ κ solids.
- 30 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (32) , 29389-29398
Synthesis of High-Entropy Gradient Crystals via the Soret Effect during Bridgman Growth
Functionally gradient materials exhibit compositional or structural gradient changes, creating new functional materials for diverse application domains. High-entropy crystals containing multiple elements hold the promise of continuous elemental regulation, facilitating the realization of functionally gradient materials. However, intrinsic property studies of high-entropy gradient crystals remain limited, and the synthesis of high-entropy gradient crystals is challenging due to the strong inherent disorder. Herein, we propose a general approach to synthesize high-entropy gradient crystals via the Soret effect in Bridgman growth. Based on the polycrystalline AgSbPbSnGeTe5, we integrate the concepts of gradient crystals and high-entropy crystals, culminating in the first successful synthesis of high-entropy gradient crystals via the Soret effect during crystal growth. The macroscopic temperature gradient in the Bridgman method drives the growth of dense, intact millimeter-sized single crystals, while the microscopic temperature gradient induces the Soret effect, leading to a compositional gradient in the high-entropy ingot. As a demonstration of its thermoelectric utility, an intrinsically high ZT ∼1.44 at 673 K was achieved in high-entropy gradient crystals. This work establishes a general paradigm for designing high-entropy gradient crystals via the Soret effect in the Bridgman method, providing a new man-made material for emerging functional needs and shedding useful light on the synthesis of large-sized high-entropy single crystal.
- 30 July 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (32) , 29389-29398
Synthesis of High-Entropy Gradient Crystals via the Soret Effect during Bridgman Growth
Functionally gradient materials exhibit compositional or structural gradient changes, creating new functional materials for diverse application domains. High-entropy crystals containing multiple elements hold the promise of continuous elemental regulation, facilitating the realization of functionally gradient materials. However, intrinsic property studies of high-entropy gradient crystals remain limited, and the synthesis of high-entropy gradient crystals is challenging due to the strong inherent disorder. Herein, we propose a general approach to synthesize high-entropy gradient crystals via the Soret effect in Bridgman growth. Based on the polycrystalline AgSbPbSnGeTe5, we integrate the concepts of gradient crystals and high-entropy crystals, culminating in the first successful synthesis of high-entropy gradient crystals via the Soret effect during crystal growth. The macroscopic temperature gradient in the Bridgman method drives the growth of dense, intact millimeter-sized single crystals, while the microscopic temperature gradient induces the Soret effect, leading to a compositional gradient in the high-entropy ingot. As a demonstration of its thermoelectric utility, an intrinsically high ZT ∼1.44 at 673 K was achieved in high-entropy gradient crystals. This work establishes a general paradigm for designing high-entropy gradient crystals via the Soret effect in the Bridgman method, providing a new man-made material for emerging functional needs and shedding useful light on the synthesis of large-sized high-entropy single crystal.
- 9 June 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (24) , 20930-20938
Polarization-Ordered Tandem in Superlattice Promoting C–N Photocatalytic Cross-Coupling
Transition metal-catalyzed C-N cross-coupling reactions are pivotal in synthesizing pharmaceuticals and agrochemicals. Nickel catalysts, while cost-effective, suffer from rapid deactivation via reductive elimination, leading to reaction instability. Photocatalysis using photogenerated charge carriers offers a promising solution to mitigate metal catalyst deactivation, yet their efficacy remains constrained by inefficient electron-hole separation, which reduces the overall catalytic performance. Herein, we propose a polarization-ordered tandem strategy to integrate multiple continuous charge carrier drivers into superlattice photocatalysts, enabling efficient charge carrier separation over a broader spatial range. Taking Bi4TaO8Cl-Bi2YO4Cl superlattice as an example, aberration-corrected electron microscopy and atomic-resolution elemental mapping confirm the successful construction of the superlattice structure. Combined with fluorescence spectroscopy, Kelvin probe spectroscopy, and ultrafast spectroscopy, our results indicate that the ordered polarization tandem between the constituent layers significantly lowers the exciton binding energy, improving carrier transfer efficiency and charge separation. Consequently, efficient electron-hole separation effectively suppresses nickel deactivation during C-N coupling reactions. Bi4TaO8Cl-Bi2YO4Cl can achieve a high conversion (99%) and selectivity (99%) to couple pyrrolidine and 4-bromobenzonitrile under visible light within 2 h. The presented strategy not only effectively mitigates the deactivation of transition metal catalysts in C-N coupling reactions but also opens new avenues for enhancing the efficiency of traditional photocatalytic processes.
- 9 June 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (24) , 20930-20938
Polarization-Ordered Tandem in Superlattice Promoting C–N Photocatalytic Cross-Coupling
Transition metal-catalyzed C-N cross-coupling reactions are pivotal in synthesizing pharmaceuticals and agrochemicals. Nickel catalysts, while cost-effective, suffer from rapid deactivation via reductive elimination, leading to reaction instability. Photocatalysis using photogenerated charge carriers offers a promising solution to mitigate metal catalyst deactivation, yet their efficacy remains constrained by inefficient electron-hole separation, which reduces the overall catalytic performance. Herein, we propose a polarization-ordered tandem strategy to integrate multiple continuous charge carrier drivers into superlattice photocatalysts, enabling efficient charge carrier separation over a broader spatial range. Taking Bi4TaO8Cl-Bi2YO4Cl superlattice as an example, aberration-corrected electron microscopy and atomic-resolution elemental mapping confirm the successful construction of the superlattice structure. Combined with fluorescence spectroscopy, Kelvin probe spectroscopy, and ultrafast spectroscopy, our results indicate that the ordered polarization tandem between the constituent layers significantly lowers the exciton binding energy, improving carrier transfer efficiency and charge separation. Consequently, efficient electron-hole separation effectively suppresses nickel deactivation during C-N coupling reactions. Bi4TaO8Cl-Bi2YO4Cl can achieve a high conversion (99%) and selectivity (99%) to couple pyrrolidine and 4-bromobenzonitrile under visible light within 2 h. The presented strategy not only effectively mitigates the deactivation of transition metal catalysts in C-N coupling reactions but also opens new avenues for enhancing the efficiency of traditional photocatalytic processes.
- 15 March 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (17) , 12159-12169
A localized surface plasmon resonance-interface induces ultrafast hot-electron spatiotemporal transfer for boosting photocatalytic H 2 evolution integrated with benzylamine C–N coupling
LSPR-interface structures in plasmonic MoO 3− x @ZnIn 2 S 4 heterojunctions provide an energy-loss-free charge transport channel to enable ultrafast hot-electron transfer for boosting photocatalytic H 2 evolution integrated with benzylamine C–N coupling.
- 15 March 2025
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 13 (17) , 12159-12169
A localized surface plasmon resonance-interface induces ultrafast hot-electron spatiotemporal transfer for boosting photocatalytic H 2 evolution integrated with benzylamine C–N coupling
LSPR-interface structures in plasmonic MoO 3− x @ZnIn 2 S 4 heterojunctions provide an energy-loss-free charge transport channel to enable ultrafast hot-electron transfer for boosting photocatalytic H 2 evolution integrated with benzylamine C–N coupling.