Shiping Zhan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Shiping Zhan has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
Jingchang Wang
College of Environmental and Chemical Engineering, Dalian University, Dalian 116622, China
11 shared publicationsQicheng Zhao
College of Environmental and Chemical Engineering
10 shared publicationsShuhua Chen
College of Environmental and Chemical Engineering, Dalian University Dalian China
7 shared publicationsWeijing Wang
College of Environmental and Chemical Engineering
7 shared publicationsZhijun Liu
AInstitute of Fluid and Powder Engineering, Dalian University of Technology, Dalian 116622, China
4 shared publicationsZhiyi Li
Institute of Fluid and Powder Engineering, Dalian University of Technology, Dalian 116024, China
4 shared publications
Latest Publications
- 22 October 2023
- Published by Springer Nature in Journal of Polymer Research
- Vol. 30 (11) , 1-18
Synthesis of star poly (L-lactic acid) and its copolymers catalyzed by lipase in supercritical carbon dioxide
- 22 October 2023
- Published by Springer Nature in Journal of Polymer Research
- Vol. 30 (11) , 1-18
Synthesis of star poly (L-lactic acid) and its copolymers catalyzed by lipase in supercritical carbon dioxide
- 10 February 2020
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 65 (4) , 1814-1823
Experimental Determination and Association Model for the Solubility of Laminarin in Supercritical Carbon Dioxide
- 10 February 2020
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 65 (4) , 1814-1823
Experimental Determination and Association Model for the Solubility of Laminarin in Supercritical Carbon Dioxide
- 1 January 2020
- Published by Elsevier in Polymer Degradation and Stability
- Vol. 171
Ring-opening dispersion polymerization of -lactide initiated by -arginine in supercritical carbon dioxide
- 1 January 2020
- Published by Elsevier in Polymer Degradation and Stability
- Vol. 171
Ring-opening dispersion polymerization of -lactide initiated by -arginine in supercritical carbon dioxide
- 24 August 2019
- Published by Springer Nature in Journal of Polymer Research
- Vol. 26 (9) , 229
Synthesis of triblock stabilizers with and without end-capped for dispersion polymerization in supercritical carbon dioxide
- 24 August 2019
- Published by Springer Nature in Journal of Polymer Research
- Vol. 26 (9) , 229
Synthesis of triblock stabilizers with and without end-capped for dispersion polymerization in supercritical carbon dioxide
- Open Access
- 23 May 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (28) , 16167-16175
Preparation and in vitro release kinetics of nitrendipine-loaded PLLA–PEG–PLLA microparticles by supercritical solution impregnation process
In this work, drug-loaded polymer microparticles were prepared by a supercritical solution impregnation (SSI) process with nitrendipine as the model drug and PLLA–PEG–PLLA as the drug carrier. The morphology, size, distribution and functional groups of the drug-loaded microparticles were characterized by scanning electron microscopy (SEM), laser particle size analyzer and fourier transform infrared analysis (FTIR). The effects of pressure, temperature and cosolvent concentration on the drug loading and release property of the microparticles prepared with and without cosolvent were investigated. The in vitro drug release kinetics of drug-loaded microparticles was studied with five models. The results indicated that the morphology of the drug-loaded polymer microparticles was not influenced by the SSI process. And the addition of ethanol cosolvent could significantly improve the drug loading of the microparticles. The most satisfied drug loading and the release properties of the microparticles were achieved under 55 °C, 13 MPa and cosolvent ethanol concentration of 3%. The drug could be released for more than 140 h. The analysis of the drug release kinetics showed that the experimental data fitted with Ritger–Peppas model were optimal. According to the release exponent value, the in vitro release process of the nitrendipine-loaded microparticles was controlled by Fickian diffusion, which can provides a theoretical basis for drug release of this type of experiment.
- 23 May 2019
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 9 (28) , 16167-16175
Open AccessPreparation and in vitro release kinetics of nitrendipine-loaded PLLA–PEG–PLLA microparticles by supercritical solution impregnation process
In this work, drug-loaded polymer microparticles were prepared by a supercritical solution impregnation (SSI) process with nitrendipine as the model drug and PLLA–PEG–PLLA as the drug carrier. The morphology, size, distribution and functional groups of the drug-loaded microparticles were characterized by scanning electron microscopy (SEM), laser particle size analyzer and fourier transform infrared analysis (FTIR). The effects of pressure, temperature and cosolvent concentration on the drug loading and release property of the microparticles prepared with and without cosolvent were investigated. The in vitro drug release kinetics of drug-loaded microparticles was studied with five models. The results indicated that the morphology of the drug-loaded polymer microparticles was not influenced by the SSI process. And the addition of ethanol cosolvent could significantly improve the drug loading of the microparticles. The most satisfied drug loading and the release properties of the microparticles were achieved under 55 °C, 13 MPa and cosolvent ethanol concentration of 3%. The drug could be released for more than 140 h. The analysis of the drug release kinetics showed that the experimental data fitted with Ritger–Peppas model were optimal. According to the release exponent value, the in vitro release process of the nitrendipine-loaded microparticles was controlled by Fickian diffusion, which can provides a theoretical basis for drug release of this type of experiment.
- 3 April 2017
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 62 (4) , 1257-1263
Measurement and Correlation of Curcumin Solubility in Supercritical Carbon Dioxide
- 3 April 2017
- Published by American Chemical Society (ACS) in Journal of Chemical & Engineering Data
- Vol. 62 (4) , 1257-1263
Measurement and Correlation of Curcumin Solubility in Supercritical Carbon Dioxide
- 9 November 2016
- Published by CSIRO Publishing in Australian Journal of Chemistry
- Vol. 70 (6) , 712-717
Ring-Opening Dispersion Polymerization of l-Lactide with Polylactide Stabilizer in Supercritical Carbon Dioxide
Non-fluorous triblock copolymers of poly(l-lactide)-block-hydroxypropyl-terminated poly(dimethyl siloxanes)-block-poly(l-lactide) (PLLA-HTPDMS-PLLA) with two different molecular weights in the range of 4800 to 6500 Da, were prepared by changing the ratio of HTPDMS to l-lactide (L-LA), and were used as stabilizers for the ring-opening dispersion polymerization (RODP) of L-LA to prepare poly(l-lactide) (PLLA) in supercritical carbon dioxide (ScCO2). The experimental results showed that the prepared non-fluorous triblock copolymers were very effective as new stabilizers for the RODP and fine powders of PLLA were obtained. The structure of the stabilizers and PLLA were characterized by 1H NMR and FTIR spectroscopy. The morphology of PLLA was investigated by scanning electron microscopy (SEM). The effects of the CO2-philic/lipophilic segment lengths of the stabilizers on the RODP were explored. The effects of the stabilizer concentration on the polymerization yield, molecular weight, and morphology of PLLA were investigated.
- 9 November 2016
- Published by CSIRO Publishing in Australian Journal of Chemistry
- Vol. 70 (6) , 712-717
Ring-Opening Dispersion Polymerization of l-Lactide with Polylactide Stabilizer in Supercritical Carbon Dioxide
Non-fluorous triblock copolymers of poly(l-lactide)-block-hydroxypropyl-terminated poly(dimethyl siloxanes)-block-poly(l-lactide) (PLLA-HTPDMS-PLLA) with two different molecular weights in the range of 4800 to 6500 Da, were prepared by changing the ratio of HTPDMS to l-lactide (L-LA), and were used as stabilizers for the ring-opening dispersion polymerization (RODP) of L-LA to prepare poly(l-lactide) (PLLA) in supercritical carbon dioxide (ScCO2). The experimental results showed that the prepared non-fluorous triblock copolymers were very effective as new stabilizers for the RODP and fine powders of PLLA were obtained. The structure of the stabilizers and PLLA were characterized by 1H NMR and FTIR spectroscopy. The morphology of PLLA was investigated by scanning electron microscopy (SEM). The effects of the CO2-philic/lipophilic segment lengths of the stabilizers on the RODP were explored. The effects of the stabilizer concentration on the polymerization yield, molecular weight, and morphology of PLLA were investigated.
- 22 July 2016
- Published by Wiley in Polymer Engineering & Science
- Vol. 56 (12) , 1432-1436
Preparation and characterization of chitosan‐ graft ‐poly(L‐lactic acid) microparticles
To improve the properties of chitosan (CS) and poly(L‐lactic acid) (PLLA) and obtain fully biodegradable materials, CS‐ g ‐PLLA copolymers were prepared using 1‐(3‐Dimethylaminopropyl)‐3‐ethylcarbodiimide hydrochloride (EDC)/N‐hydroxyl succinimide (NHS) as a coupling agent. The copolymers were characterized by Fourier transform infrared analysis (FTIR), 1 H nuclear magnetic resonance ( 1 H NMR), elemental analysis, differential scanning calorimetry (DSC), X‐ray diffraction (XRD) and scanning electron microscopy (SEM). The results obtained by FTIR and 1 H NMR showed that CS and PLLA were grafted successfully via an amide bond. DSC and XRD results showed that the thermal stability of CS had been significantly improved by grafting PLLA to the molecular chains of CS and the crystallinity of the CS‐ g ‐PLLA copolymers decreased significantly. Elemental analysis showed that the achieved the maximum degree of substitution of PLLA was 60.88%, while the concentration of CS was 2 mg/mL, the PLLA molecular weight was 10,000, and the EDC/NHS ratio was 2:1. Images from SEM demonstrated that the copolymers had a spherical shape and smooth surface. Moreover, the products were well dispersed without any aggregation. POLYM. ENG. SCI., 56:1432–1436, 2016. © 2016 Society of Plastics Engineers
- 22 July 2016
- Published by Wiley in Polymer Engineering & Science
- Vol. 56 (12) , 1432-1436
Preparation and characterization of chitosan‐ graft ‐poly(L‐lactic acid) microparticles
To improve the properties of chitosan (CS) and poly(L‐lactic acid) (PLLA) and obtain fully biodegradable materials, CS‐ g ‐PLLA copolymers were prepared using 1‐(3‐Dimethylaminopropyl)‐3‐ethylcarbodiimide hydrochloride (EDC)/N‐hydroxyl succinimide (NHS) as a coupling agent. The copolymers were characterized by Fourier transform infrared analysis (FTIR), 1 H nuclear magnetic resonance ( 1 H NMR), elemental analysis, differential scanning calorimetry (DSC), X‐ray diffraction (XRD) and scanning electron microscopy (SEM). The results obtained by FTIR and 1 H NMR showed that CS and PLLA were grafted successfully via an amide bond. DSC and XRD results showed that the thermal stability of CS had been significantly improved by grafting PLLA to the molecular chains of CS and the crystallinity of the CS‐ g ‐PLLA copolymers decreased significantly. Elemental analysis showed that the achieved the maximum degree of substitution of PLLA was 60.88%, while the concentration of CS was 2 mg/mL, the PLLA molecular weight was 10,000, and the EDC/NHS ratio was 2:1. Images from SEM demonstrated that the copolymers had a spherical shape and smooth surface. Moreover, the products were well dispersed without any aggregation. POLYM. ENG. SCI., 56:1432–1436, 2016. © 2016 Society of Plastics Engineers
- 28 July 2015
- Published by Springer Nature in Journal of Polymer Research
- Vol. 22 (8) , 1-7
Dispersion polymerization of L-lactide/ε-caprolactone in supercritical carbon dioxide
- 28 July 2015
- Published by Springer Nature in Journal of Polymer Research
- Vol. 22 (8) , 1-7
Dispersion polymerization of L-lactide/ε-caprolactone in supercritical carbon dioxide
- 4 May 2015
- Published by Taylor & Francis in Particulate Science and Technology
- Vol. 33 (3) , 314-320
Preparation of the Magnetic Polylactic Acid Microspheres with the Modified Fe3O4 and Compound Emulsifiers
In order to achieve a targeting drug carrier system, magnetic polylactic acid (PLA) microspheres were synthesized by modified Fe3O4 and compound emulsifiers with the method of emulsion solvent evaporation. The morphology, size, and size distribution of magnetic microspheres were measured by scanning electron microscopy and laser particle size analyzer, respectively. The result indicated that modified Fe3O4 and compound emulsifiers were necessary for fabrication of magnetic PLA/Fe3O4 microspheres. By analyzing the Fourier transform infrared spectra, it was found that all of existing functional groups of PLA and Fe3O4 were kept invariable. Besides, magnetic property of microspheres was measured by vibrating sample magnetometer, and related results showed that the magnetic microspheres were super paramagnetic and the magnetization can be reached to 12.6 emu/g. On the basis of the thermalgravimetric analysis, the research found that magnetic Fe3O4 was loaded into the PLA microspheres whose content of magnetic particles was 15 wt%.
- 4 May 2015
- Published by Taylor & Francis in Particulate Science and Technology
- Vol. 33 (3) , 314-320
Preparation of the Magnetic Polylactic Acid Microspheres with the Modified Fe3O4 and Compound Emulsifiers
In order to achieve a targeting drug carrier system, magnetic polylactic acid (PLA) microspheres were synthesized by modified Fe3O4 and compound emulsifiers with the method of emulsion solvent evaporation. The morphology, size, and size distribution of magnetic microspheres were measured by scanning electron microscopy and laser particle size analyzer, respectively. The result indicated that modified Fe3O4 and compound emulsifiers were necessary for fabrication of magnetic PLA/Fe3O4 microspheres. By analyzing the Fourier transform infrared spectra, it was found that all of existing functional groups of PLA and Fe3O4 were kept invariable. Besides, magnetic property of microspheres was measured by vibrating sample magnetometer, and related results showed that the magnetic microspheres were super paramagnetic and the magnetization can be reached to 12.6 emu/g. On the basis of the thermalgravimetric analysis, the research found that magnetic Fe3O4 was loaded into the PLA microspheres whose content of magnetic particles was 15 wt%.