Rodrigo Ledesma-Aguilar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Rodrigo Ledesma-Aguilar has a total of 102 co-authors. Here are the top co-authors by number of shared publications:
- Glen McHale
University of Edinburgh
25 shared publications - Gary George Wells
The University of Edinburgh
13 shared publications - Aurora Hernandez-Machado
Department of Condensed Matter Physics, University of Barcelona (UB), Barcelona, Spain
10 shared publications - Ignacio Pagonabarraga
Universitat de Barcelona
9 shared publications - Élfego Ruiz-Gutiérrez
School of Engineering, Newcastle University, Newcastle upon Tyne, NE1 7RU, UK
9 shared publications - Julia M. Yeomans
Rudolf Peierls Centre for Theoretical Physics, University of Oxford, Oxford, UK
7 shared publications
Latest Publications
- Open Access
- 12 November 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 135 (20) , 204003
Adhesive Forces in Droplet Kinetic Friction on Liquidlike Surfaces
Kinetic frictional forces resisting droplet motion often appear to be separate from surface wettability and adhesive forces. Here we show that such friction arises from a simple combination of the contact angle hysteresis and adhesive force. We show theoretically, and confirm using tilt angle experiments of droplets on liquidlike surfaces, the dependence of the coefficient of droplet-on-solid kinetic friction on system parameters. We also show that a molecular kinetic-type model can describe the observed nonlinear velocity-force relationship. Our findings provide a fundamental understanding of the relationship between droplet-on-solid friction, and wettability and liquid adhesion.
- 12 November 2025
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 135 (20) , 204003
Open AccessAdhesive Forces in Droplet Kinetic Friction on Liquidlike Surfaces
Kinetic frictional forces resisting droplet motion often appear to be separate from surface wettability and adhesive forces. Here we show that such friction arises from a simple combination of the contact angle hysteresis and adhesive force. We show theoretically, and confirm using tilt angle experiments of droplets on liquidlike surfaces, the dependence of the coefficient of droplet-on-solid kinetic friction on system parameters. We also show that a molecular kinetic-type model can describe the observed nonlinear velocity-force relationship. Our findings provide a fundamental understanding of the relationship between droplet-on-solid friction, and wettability and liquid adhesion.
- 6 November 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (45) , 30143-30159
Needle Matters: Addressing the Effect of the Needle on Contact Angle Hysteresis Surface Characterization
Reliable measurements of Contact Angle Hysteresis (CAH) are crucial for understanding surface wettability and droplet mobility. Although sessile drop goniometry - where droplets are inflated and deflated using a syringe needle - is widely used, systematic errors can occur due to variations in needle properties and dosing flow rates. These influences are not well quantified, which limits the reproducibility and comparability of CAH data across studies. Additionally, CAH measurements can be highly sensitive to the specifics of the experimental setup, a sensitivity that remains to be fully established. In this work, we systematically investigate the effects of needle size, material, and dosing flow rate on CAH measurements. We assess needle-droplet interactions at the primary surface-droplet and at the secondary needle-droplet triple-phase contact line (TPCL) and how these interactions affect droplet shape during CAH characterization, impacting the baseline contact angle and contact line dynamics. Our findings demonstrate that needle size is the primary factor significantly affecting the accuracy of advancing and receding contact angle measurements. The needle material has a secondary influence, especially on hydrophobic surfaces with high hysteresis. In contrast, hydrophilic surfaces are less affected by needle properties due to strong adhesion and high pinning forces, while low-hysteresis surfaces are also less affected owed to their low resistance to droplet movement. Although dosing flow rate significantly impacts contact angle measurements, particularly on hydrophobic surfaces, the effects of needle size and material are more pronounced. A flow rate of 10 μL/min, combined with recommended needle properties depending on the surface characterized, is suggested to facilitate quasi-steady droplet volume changes and minimize dynamic effects. These findings illuminate the intricate relationship between surface wettability, needle characteristics, and droplet mobility, providing quantitative criteria for optimizing experimental conditions and enhancing measurement accuracy.
- 6 November 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (45) , 30143-30159
Needle Matters: Addressing the Effect of the Needle on Contact Angle Hysteresis Surface Characterization
Reliable measurements of Contact Angle Hysteresis (CAH) are crucial for understanding surface wettability and droplet mobility. Although sessile drop goniometry - where droplets are inflated and deflated using a syringe needle - is widely used, systematic errors can occur due to variations in needle properties and dosing flow rates. These influences are not well quantified, which limits the reproducibility and comparability of CAH data across studies. Additionally, CAH measurements can be highly sensitive to the specifics of the experimental setup, a sensitivity that remains to be fully established. In this work, we systematically investigate the effects of needle size, material, and dosing flow rate on CAH measurements. We assess needle-droplet interactions at the primary surface-droplet and at the secondary needle-droplet triple-phase contact line (TPCL) and how these interactions affect droplet shape during CAH characterization, impacting the baseline contact angle and contact line dynamics. Our findings demonstrate that needle size is the primary factor significantly affecting the accuracy of advancing and receding contact angle measurements. The needle material has a secondary influence, especially on hydrophobic surfaces with high hysteresis. In contrast, hydrophilic surfaces are less affected by needle properties due to strong adhesion and high pinning forces, while low-hysteresis surfaces are also less affected owed to their low resistance to droplet movement. Although dosing flow rate significantly impacts contact angle measurements, particularly on hydrophobic surfaces, the effects of needle size and material are more pronounced. A flow rate of 10 μL/min, combined with recommended needle properties depending on the surface characterized, is suggested to facilitate quasi-steady droplet volume changes and minimize dynamic effects. These findings illuminate the intricate relationship between surface wettability, needle characteristics, and droplet mobility, providing quantitative criteria for optimizing experimental conditions and enhancing measurement accuracy.
- Open Access
- 19 September 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (38) , eadw6615
Multiple equilibria enables tunable wetting of droplets on patterned liquid surfaces
Patterning solid surfaces with varying wettability is important to manage droplets in microfluidics, heat transfer, and printing. Solid surface roughness poses fundamental limitations including contact-line pinning and solid friction. Here, we report an experimental strategy and theoretical design principles for patterned liquid surfaces (PaLS) that combine the controlled wettability from patterning with the ultrasmoothness of a lubricant-infused surface. In contrast to a solid, on PaLS, a droplet can be in 10 different wetting states. This richness arises from the adaptation of the liquid lubricants and can be harnessed to control the apparent contact angle of the droplet over the full range of wettability while removing contact-line pinning effects induced by the solid surface. In the limit of thin liquid films, we derive surface-averaged laws for the apparent contact angle for each wetting state, which capture both experimental and simulation data. Our results provide a distinct approach to surface patterning that exploits the interaction of fluids with lubricant-impregnated surfaces.
- 19 September 2025
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 11 (38) , eadw6615
Open AccessMultiple equilibria enables tunable wetting of droplets on patterned liquid surfaces
Patterning solid surfaces with varying wettability is important to manage droplets in microfluidics, heat transfer, and printing. Solid surface roughness poses fundamental limitations including contact-line pinning and solid friction. Here, we report an experimental strategy and theoretical design principles for patterned liquid surfaces (PaLS) that combine the controlled wettability from patterning with the ultrasmoothness of a lubricant-infused surface. In contrast to a solid, on PaLS, a droplet can be in 10 different wetting states. This richness arises from the adaptation of the liquid lubricants and can be harnessed to control the apparent contact angle of the droplet over the full range of wettability while removing contact-line pinning effects induced by the solid surface. In the limit of thin liquid films, we derive surface-averaged laws for the apparent contact angle for each wetting state, which capture both experimental and simulation data. Our results provide a distinct approach to surface patterning that exploits the interaction of fluids with lubricant-impregnated surfaces.
- Open Access
- 9 June 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (7) , 5660-5669
Long-Term Antibiofilm Efficacy of Slippery Covalently Attached Liquid-like Surfaces in Dynamic and Static Culture Conditions
This study explores the antibiofilm potential of slippery covalently attached liquid-like surfaces, revealing their remarkable ability to inhibit biofilm formation over extended periods, regardless of their hydrophobic or hydrophilic nature. We engineered permanently bound liquid-like solid surfaces with exceptional slipperiness, defined by ultralow contact angle hysteresis, and assessed their effectiveness against two nosocomial pathogens, Pseudomonas aeruginosa (PAO1) and Staphylococcus epidermidis (FH8). These surfaces achieved a 3-5 order of magnitude reduction in biofilm formation compared to polydimethylsiloxane under both static and dynamic culture conditions over 14 days. Impressively, both the hydrophobic and hydrophilic slippery liquid-like solid surfaces significantly outperformed the widely used antimicrobial coatings containing silver particles in the long term in both static and dynamic cultures. These slippery surfaces also outperformed emerging antibiofilm surfaces such as liquid-infused surfaces in extended periods of dynamic cultures. We have demonstrated that ultralow liquid-solid friction, characterized as ultralow contact angle hysteresis, is an important predictor of the long-term antibiofilm performance of both hydrophobic and hydrophilic slippery covalently attached liquid-like surfaces, particularly in dynamic cultures. This work elucidates the interfacial mechanisms and scientific principles underpinning the design of advanced antibiofilm surfaces capable of maintaining a superior performance over the long-term.
- 9 June 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (7) , 5660-5669
Open AccessLong-Term Antibiofilm Efficacy of Slippery Covalently Attached Liquid-like Surfaces in Dynamic and Static Culture Conditions
This study explores the antibiofilm potential of slippery covalently attached liquid-like surfaces, revealing their remarkable ability to inhibit biofilm formation over extended periods, regardless of their hydrophobic or hydrophilic nature. We engineered permanently bound liquid-like solid surfaces with exceptional slipperiness, defined by ultralow contact angle hysteresis, and assessed their effectiveness against two nosocomial pathogens, Pseudomonas aeruginosa (PAO1) and Staphylococcus epidermidis (FH8). These surfaces achieved a 3-5 order of magnitude reduction in biofilm formation compared to polydimethylsiloxane under both static and dynamic culture conditions over 14 days. Impressively, both the hydrophobic and hydrophilic slippery liquid-like solid surfaces significantly outperformed the widely used antimicrobial coatings containing silver particles in the long term in both static and dynamic cultures. These slippery surfaces also outperformed emerging antibiofilm surfaces such as liquid-infused surfaces in extended periods of dynamic cultures. We have demonstrated that ultralow liquid-solid friction, characterized as ultralow contact angle hysteresis, is an important predictor of the long-term antibiofilm performance of both hydrophobic and hydrophilic slippery covalently attached liquid-like surfaces, particularly in dynamic cultures. This work elucidates the interfacial mechanisms and scientific principles underpinning the design of advanced antibiofilm surfaces capable of maintaining a superior performance over the long-term.
- 3 June 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (23) , 14579-14588
Surfaces Slippery to Liquids: Wettability, Adhesion, and Contact Line Friction
Ensuring surfaces stay dry and clean and resistant to icing and fouling is a pervasive challenge. Historically, strategies to achieve this, such as superhydrophobicity, have focused on surface wettability. Recently, research has shifted to minimizing surface heterogeneity using slippery liquid-infused porous and slippery covalently attached liquid-like surfaces. Here, we discuss a conceptual approach to contact line friction that provides design principles underlying practical surfaces. This brings an understanding of how contact angles, on both solid and liquid-film surfaces, combined with contact angle hysteresis can predict contact line friction. This leads to reconsideration of the long-accepted wettability “spectrum”. Finally, we speculate on opportunities for new coatings free from poly- and perfluoroalkyl substances to address the societal and environmental challenges of “Forever Chemicals”.
- 3 June 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (23) , 14579-14588
Surfaces Slippery to Liquids: Wettability, Adhesion, and Contact Line Friction
Ensuring surfaces stay dry and clean and resistant to icing and fouling is a pervasive challenge. Historically, strategies to achieve this, such as superhydrophobicity, have focused on surface wettability. Recently, research has shifted to minimizing surface heterogeneity using slippery liquid-infused porous and slippery covalently attached liquid-like surfaces. Here, we discuss a conceptual approach to contact line friction that provides design principles underlying practical surfaces. This brings an understanding of how contact angles, on both solid and liquid-film surfaces, combined with contact angle hysteresis can predict contact line friction. This leads to reconsideration of the long-accepted wettability “spectrum”. Finally, we speculate on opportunities for new coatings free from poly- and perfluoroalkyl substances to address the societal and environmental challenges of “Forever Chemicals”.
- Open Access
- 6 December 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (50) , 26600-26606
Enhanced Imbibition in Liquid-Infused Coated Microchannels
Spontaneous capillary imbibition has the potential to improve the performance of many micro and nanodevices since it does not require an external energy source to drive a fluid flow. Despite this advantage, controlling and reducing the friction exerted by the channel walls, which limits the speed of the liquid, remains a challenge. Here, we demonstrate experimentally that infusing the walls of a channel with a liquid lubricant substantially speeds up the imbibition process and reduces the overall viscous friction. By varying the viscosity of the lubricant, we observe a substantial reduction of the imbibition time of up to 50%. Our experimental results are in good agreement with previous theoretical predictions, providing a solid framework to study low-resistance spontaneous imbibition processes.
- 6 December 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (50) , 26600-26606
Open AccessEnhanced Imbibition in Liquid-Infused Coated Microchannels
Spontaneous capillary imbibition has the potential to improve the performance of many micro and nanodevices since it does not require an external energy source to drive a fluid flow. Despite this advantage, controlling and reducing the friction exerted by the channel walls, which limits the speed of the liquid, remains a challenge. Here, we demonstrate experimentally that infusing the walls of a channel with a liquid lubricant substantially speeds up the imbibition process and reduces the overall viscous friction. By varying the viscosity of the lubricant, we observe a substantial reduction of the imbibition time of up to 50%. Our experimental results are in good agreement with previous theoretical predictions, providing a solid framework to study low-resistance spontaneous imbibition processes.
- Open Access
- 6 November 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (46) , 24387-24396
Competing Bifurcations Determine Symmetry Breaking During Droplet Snaps on Smooth Patterned Surfaces
The shape and stability of a droplet in contact with a solid surface is affected by the chemical composition and topography of the solid, and crucially, by the droplet's size. During a variation in size, most often observed during evaporation, droplets on smooth patterned surfaces can undergo sudden shape and position changes. Such changes, called snaps, are prompted by the surface pattern and arise from fold and pitchfork bifurcations which respectively cause symmetric and asymmetric motions. Yet, which type of snap is likely to be observed is an open fundamental question that has relevance in the rational design of surfaces for managing droplets. Here we show that the likelihood of observing symmetric or asymmetric snaps depends on the distance between fold and pitchfork bifurcation points and on how this distance varies for droplets that grow or shrink in size on surfaces patterned with a smooth topography. Our results can help develop strategies to control droplets by exploiting smooth surface patterns but also have broader relevance in situations where different types of bifurcations compete in determining the stability of a system, for instance in snap-through instabilities observed in elastic media.
- 6 November 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (46) , 24387-24396
Open AccessCompeting Bifurcations Determine Symmetry Breaking During Droplet Snaps on Smooth Patterned Surfaces
The shape and stability of a droplet in contact with a solid surface is affected by the chemical composition and topography of the solid, and crucially, by the droplet's size. During a variation in size, most often observed during evaporation, droplets on smooth patterned surfaces can undergo sudden shape and position changes. Such changes, called snaps, are prompted by the surface pattern and arise from fold and pitchfork bifurcations which respectively cause symmetric and asymmetric motions. Yet, which type of snap is likely to be observed is an open fundamental question that has relevance in the rational design of surfaces for managing droplets. Here we show that the likelihood of observing symmetric or asymmetric snaps depends on the distance between fold and pitchfork bifurcation points and on how this distance varies for droplets that grow or shrink in size on surfaces patterned with a smooth topography. Our results can help develop strategies to control droplets by exploiting smooth surface patterns but also have broader relevance in situations where different types of bifurcations compete in determining the stability of a system, for instance in snap-through instabilities observed in elastic media.
- Open Access
- 17 January 2024
- Published by Wiley in Small Structures
- Vol. 5 (4)
Transforming Auxetic Metamaterials into Superhydrophobic Surfaces
Superhydrophobic materials are often inspired by nature, whereas metamaterials are engineered to have properties not usually occurring naturally. In both, the key to their unique properties is structure. Here, it is shown that a negative Poisson's ratio (auxetic) mechanical metamaterial can transform into a unique superhydrophobic material. When stretched, its surface has the counterintuitive property that it also expands in the orthogonal lateral direction. The change in the solid surface fraction as strain is applied is modeled, and it is shown that it decreases as the space between solid elements of the auxetic lattice expands. This results in a unique dependence of the superhydrophobicity on strain. Experimental models are constructed to illustrate the relationship between different states of strain and superhydrophobicity as the lattice transitions from an auxetic to a conventional structure. The findings offer a new approach to designing superhydrophobic materials for self‐cleaning surfaces, droplet transportation, droplet encapsulation, and oil–water separation.
- 17 January 2024
- Published by Wiley in Small Structures
- Vol. 5 (4)
Open AccessTransforming Auxetic Metamaterials into Superhydrophobic Surfaces
Superhydrophobic materials are often inspired by nature, whereas metamaterials are engineered to have properties not usually occurring naturally. In both, the key to their unique properties is structure. Here, it is shown that a negative Poisson's ratio (auxetic) mechanical metamaterial can transform into a unique superhydrophobic material. When stretched, its surface has the counterintuitive property that it also expands in the orthogonal lateral direction. The change in the solid surface fraction as strain is applied is modeled, and it is shown that it decreases as the space between solid elements of the auxetic lattice expands. This results in a unique dependence of the superhydrophobicity on strain. Experimental models are constructed to illustrate the relationship between different states of strain and superhydrophobicity as the lattice transitions from an auxetic to a conventional structure. The findings offer a new approach to designing superhydrophobic materials for self‐cleaning surfaces, droplet transportation, droplet encapsulation, and oil–water separation.
- Open Access
- 9 October 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (15)
Wetting transitions on superhydrophobic auxetic metamaterials
Superhydrophobicity plays a pivotal role in numerous applications. Recently, we have demonstrated the potential of auxetic metamaterials in creating superhydrophobic materials with unique wetting properties. However, the superhydrophobic properties are lost when the liquid penetrates into the surface structure. Understanding the conditions for droplet penetration is crucial for advancing wetting control. Here, we experimentally identify the transition from droplet suspension to full-penetration on an auxetic bowtie/honeycomb lattice membrane. We develop a comprehensive physical model surface representing different states of strain, ranging from auxetic to conventional lattice membranes, and consider the wetting as the liquid surface tension is varied using water/ethanol mixtures. By examining the interplay between contact angle and lattice structure, we gain valuable insights into the conditions for droplet suspension and full-penetration. Additionally, we develop a simple touch test to discern whether a droplet has effectively fully penetrated the structure, providing a practical and efficient means of distinguishing the different wetting states (suspended or partially penetrating vs fully penetrating).
- 9 October 2023
- Published by AIP Publishing in Applied Physics Letters
- Vol. 123 (15)
Open AccessWetting transitions on superhydrophobic auxetic metamaterials
Superhydrophobicity plays a pivotal role in numerous applications. Recently, we have demonstrated the potential of auxetic metamaterials in creating superhydrophobic materials with unique wetting properties. However, the superhydrophobic properties are lost when the liquid penetrates into the surface structure. Understanding the conditions for droplet penetration is crucial for advancing wetting control. Here, we experimentally identify the transition from droplet suspension to full-penetration on an auxetic bowtie/honeycomb lattice membrane. We develop a comprehensive physical model surface representing different states of strain, ranging from auxetic to conventional lattice membranes, and consider the wetting as the liquid surface tension is varied using water/ethanol mixtures. By examining the interplay between contact angle and lattice structure, we gain valuable insights into the conditions for droplet suspension and full-penetration. Additionally, we develop a simple touch test to discern whether a droplet has effectively fully penetrated the structure, providing a practical and efficient means of distinguishing the different wetting states (suspended or partially penetrating vs fully penetrating).
- Open Access
- 24 July 2023
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 39 (31) , 11028-11035
Cassie’s Law Reformulated: Composite Surfaces from Superspreading to Superhydrophobic
In 1948, Cassie provided an equation describing the wetting of a smooth, heterogeneous surface. He proposed that the cosine of the contact angle, θc, for a droplet on a composite surface could be predicted from a weighted average using the fractional surface areas, fi, of the cosines of contact angles of a droplet on the individual component surfaces, i.e., cos θc = f1 cos θ1 + f2 cos θ2. This was a generalization of an earlier equation for porous materials, which has recently proven fundamental to underpinning the theoretical description of wetting of superhydrophobic and superoleophobic surfaces. However, there has been little attention paid to what happens when a liquid exhibits complete wetting on one of the surface components. Here, we show that Cassie's equation can be reformulated using spreading coefficients. This reformulated equation is capable of describing composite surfaces where the individual surface components have negative (droplet state/partial wetting) or positive (film-forming/complete wetting) spreading coefficients. The original Cassie equation is then a special case when the combination of interfacial tensions results in a droplet state on the composite surface for which a contact angle can be defined. In the case of a composite surface created from a partial wetting (droplet state) surface and a complete wetting (film-forming) surface, there is a threshold surface area fraction at which a liquid on the composite surface transitions from a droplet to a film state. The applicability of this equation is demonstrated from literature data including data on mixed self-assembled monolayers on copper, silver, and gold surfaces that was regarded as definitive in establishing the validity of the Cassie equation. Finally, we discuss the implications of these ideas for super-liquid repellent surfaces.
- 24 July 2023
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 39 (31) , 11028-11035
Open AccessCassie’s Law Reformulated: Composite Surfaces from Superspreading to Superhydrophobic
In 1948, Cassie provided an equation describing the wetting of a smooth, heterogeneous surface. He proposed that the cosine of the contact angle, θc, for a droplet on a composite surface could be predicted from a weighted average using the fractional surface areas, fi, of the cosines of contact angles of a droplet on the individual component surfaces, i.e., cos θc = f1 cos θ1 + f2 cos θ2. This was a generalization of an earlier equation for porous materials, which has recently proven fundamental to underpinning the theoretical description of wetting of superhydrophobic and superoleophobic surfaces. However, there has been little attention paid to what happens when a liquid exhibits complete wetting on one of the surface components. Here, we show that Cassie's equation can be reformulated using spreading coefficients. This reformulated equation is capable of describing composite surfaces where the individual surface components have negative (droplet state/partial wetting) or positive (film-forming/complete wetting) spreading coefficients. The original Cassie equation is then a special case when the combination of interfacial tensions results in a droplet state on the composite surface for which a contact angle can be defined. In the case of a composite surface created from a partial wetting (droplet state) surface and a complete wetting (film-forming) surface, there is a threshold surface area fraction at which a liquid on the composite surface transitions from a droplet to a film state. The applicability of this equation is demonstrated from literature data including data on mixed self-assembled monolayers on copper, silver, and gold surfaces that was regarded as definitive in establishing the validity of the Cassie equation. Finally, we discuss the implications of these ideas for super-liquid repellent surfaces.