Guofu Ma
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Guofu Ma has a total of 196 co-authors. Here are the top co-authors by number of shared publications:
- Hui Peng
Northwest Normal University
61 shared publications Kanjun Sun
College of Chemistry and Chemical Engineering Lanzhou City University Lanzhou Gansu Province China
51 shared publications- Ziqiang Lei
Northwest Normal University
43 shared publications Hui Peng
Key Laboratory of Eco‐functional Polymer Materials of the Ministry of Education, Key Laboratory of Polymer Materials of Gansu Province, College of Chemistry and Chemical Engineering, Collage of Engineering Northwest Normal University Lanzhou 730070 China
40 shared publicationsZiqiang Lei
Key Laboratory of Eco‐Functional Polymer Materials of the Ministry of Education Key Laboratory of Polymer Materials of Gansu Province College of Chemistry and Chemical Engineering Northwest Normal University Lanzhou 730070 China
23 shared publicationsXin Wang
Northwest Normal University
20 shared publications
Latest Publications
- 6 November 2026
- Published by Wiley in Chemistry – A European Journal
A Mechano‐Electrochemical Stable Hydrogel for Flexible Energy Storage and Motion Monitoring
Balancing mechanical toughness, environmental durability, sensing accuracy in hydrogel based flexible devices remains challenging. This paper reports a multifunctional hydrogel P(AM‐co‐SBMA)/CMCS‐IL, synthesized via free radical polymerization in [EMIM][BF 4 ]/H 2 O binary solvent system, natural polysaccharide CMCS as rigid reinforcing network, AM and zwitterionic SBMA for flexibility. The hydrogen bonds provide exceptional tensile properties, enduring 961% strain and 80% compressive strain without fracturing. It exhibits strong dehydration resistance, retaining 80% of its water content after 12 h in room temperature environment. When assembled into FSC, the device has high specific capacitance of 151.6 F g − 1 at 0.2 A g − 1 and energy density of 21.06 Wh kg − 1 at 200 W kg − 1 , while maintaining 76% capacitance retention after 8,000 cycles. Crucially, the FSC shows outstanding electrochemical stability across different bending (0° to 180°) and wide temperature range (−20°C to 60°C). Additionally, a flexible strain sensor based on the hydrogel features rapid electromechanical response (response and recovery times of 0.7 s and 0.6 s) and captures bending deformations and subtle muscle activities with high signal to noise ratios. This multifunctional electrolyte provides a key design strategy for integrating smart skins and flexible energy storage systems.
- 6 November 2026
- Published by Wiley in Chemistry – A European Journal
A Mechano‐Electrochemical Stable Hydrogel for Flexible Energy Storage and Motion Monitoring
Balancing mechanical toughness, environmental durability, sensing accuracy in hydrogel based flexible devices remains challenging. This paper reports a multifunctional hydrogel P(AM‐co‐SBMA)/CMCS‐IL, synthesized via free radical polymerization in [EMIM][BF 4 ]/H 2 O binary solvent system, natural polysaccharide CMCS as rigid reinforcing network, AM and zwitterionic SBMA for flexibility. The hydrogen bonds provide exceptional tensile properties, enduring 961% strain and 80% compressive strain without fracturing. It exhibits strong dehydration resistance, retaining 80% of its water content after 12 h in room temperature environment. When assembled into FSC, the device has high specific capacitance of 151.6 F g − 1 at 0.2 A g − 1 and energy density of 21.06 Wh kg − 1 at 200 W kg − 1 , while maintaining 76% capacitance retention after 8,000 cycles. Crucially, the FSC shows outstanding electrochemical stability across different bending (0° to 180°) and wide temperature range (−20°C to 60°C). Additionally, a flexible strain sensor based on the hydrogel features rapid electromechanical response (response and recovery times of 0.7 s and 0.6 s) and captures bending deformations and subtle muscle activities with high signal to noise ratios. This multifunctional electrolyte provides a key design strategy for integrating smart skins and flexible energy storage systems.
- 12 October 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (39) , 15719-15734
Lignosulfonate-based hydrogel electrolytes utilizing desolvation regulation and electrostatic shielding boost Zn anode stability and flexible sensor performance
A highly stable Zn anode and a highly sensitive flexible strain sensor was achieved by leveraging the synergistic effect of desolvation regulation and electrostatic shielding of a lignosulfonate-based hydrogel electrolyte.
- 12 October 2026
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 28 (39) , 15719-15734
Lignosulfonate-based hydrogel electrolytes utilizing desolvation regulation and electrostatic shielding boost Zn anode stability and flexible sensor performance
A highly stable Zn anode and a highly sensitive flexible strain sensor was achieved by leveraging the synergistic effect of desolvation regulation and electrostatic shielding of a lignosulfonate-based hydrogel electrolyte.
- 10 October 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (19)
Confined Phase Transition Infiltration Coupled With In Situ Pore Sealing: Constructing Hard Carbon Rich in Closed Pore for Plateau‐Capacity‐Dominated Sodium Storage
Biomass‐derived hard carbon (HC) is a promising candidate for anode materials in sodium‐ion batteries (SIBs). However, abundant open pores generated during activation process often lead to severe proliferation of the solid electrolyte interphase (SEI) and irreversible Na + consumption, severely compromising the initial Coulombic efficiency (ICE) and low‐voltage plateau capacity. This work proposes a synergistic strategy of confined phase transition infiltration and in situ pore sealing, using waste green tea as a precursor to construct a HC anode dominated by plateau capacity. Low dose of ZnCl 2 induces controllable hydrolysis and aromatization of cellulose and generate nanoscale open pores. These pores act as confined microreactors, inducing an in situ chemical vapor deposition like carbon growth that effectively “stitching” the open voids into solvent sieving closed pores. Consequently, it delivers a remarkable ICE of 79.1%, a high reversible capacity of 342.3 mAh g −1 at 0.1 A g −1 , and robust cycling stability (86.2% retention after 1000 cycles at 1.0 A g −1 ). In‐/ex situ analysis reveals that its reversible sodium storage mechanism encompasses a triple synergy of defect adsorption, interlayer intercalation, and closed pore filling with quasi metallic sodium clusters. The confined pore sealing engineering strategy provides a robust paradigm for designing high‐performance HC anodes.
- 10 October 2026
- Published by Wiley in ChemSusChem
- Vol. 19 (19)
Confined Phase Transition Infiltration Coupled With In Situ Pore Sealing: Constructing Hard Carbon Rich in Closed Pore for Plateau‐Capacity‐Dominated Sodium Storage
Biomass‐derived hard carbon (HC) is a promising candidate for anode materials in sodium‐ion batteries (SIBs). However, abundant open pores generated during activation process often lead to severe proliferation of the solid electrolyte interphase (SEI) and irreversible Na + consumption, severely compromising the initial Coulombic efficiency (ICE) and low‐voltage plateau capacity. This work proposes a synergistic strategy of confined phase transition infiltration and in situ pore sealing, using waste green tea as a precursor to construct a HC anode dominated by plateau capacity. Low dose of ZnCl 2 induces controllable hydrolysis and aromatization of cellulose and generate nanoscale open pores. These pores act as confined microreactors, inducing an in situ chemical vapor deposition like carbon growth that effectively “stitching” the open voids into solvent sieving closed pores. Consequently, it delivers a remarkable ICE of 79.1%, a high reversible capacity of 342.3 mAh g −1 at 0.1 A g −1 , and robust cycling stability (86.2% retention after 1000 cycles at 1.0 A g −1 ). In‐/ex situ analysis reveals that its reversible sodium storage mechanism encompasses a triple synergy of defect adsorption, interlayer intercalation, and closed pore filling with quasi metallic sodium clusters. The confined pore sealing engineering strategy provides a robust paradigm for designing high‐performance HC anodes.
- 7 October 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (41) , 18696-18708
Coupled Regulation of Solvation Structure and Interfacial Engineering by Acetaminophen for Ultralong-Life Aqueous Zn-Ion Hybrid Capacitors
Aqueous zinc-ion hybrid capacitors (AZICs) offer the advantages of safety, low cost, and environmental friendliness, but the poor interfacial stability of the Zn anode remains a bottleneck for their large-scale energy storage applications. Certain electrolyte additives can only provide one-dimensional regulation, which is insufficient to synergistically suppress multiple failure mechanisms. This study reports a “multifunctional single-molecule” additive strategy utilizing acetaminophen (AP) to achieve ultralong-term stability of the zinc anodes. The synergistic interaction between the phenolic hydroxyl (−OH) and amide (−NHCOCH3) functional groups in AP creates a stable Zn2+ solvation environment, effectively suppressing the hydrogen evolution reaction. Concurrently, the electron-rich aromatic rings form a hydrophobic dynamic passivation interface protective layer, facilitating the reversible deposition and stripping of Zn. Consequently, the introduction of AP significantly enhances electrochemical performance, such as the Zn//Zn symmetric cell exhibits a lifespan extended to 1000 h at 1 mA cm−2 and 1 mAh cm−2, while the AZICs maintains a high specific capacity of 49.8 mAh g−1 and a Coulombic efficiency close to 100% after 60,000 cycles at a high current density of 7 A g−1. This study confirms the immense application potential of AP as an eco-friendly, multifunctional additive platform in high-performance aqueous zinc-based energy storage devices.
- 7 October 2026
- Published by American Chemical Society (ACS) in ACS Sustainable Chemistry & Engineering
- Vol. 14 (41) , 18696-18708
Coupled Regulation of Solvation Structure and Interfacial Engineering by Acetaminophen for Ultralong-Life Aqueous Zn-Ion Hybrid Capacitors
Aqueous zinc-ion hybrid capacitors (AZICs) offer the advantages of safety, low cost, and environmental friendliness, but the poor interfacial stability of the Zn anode remains a bottleneck for their large-scale energy storage applications. Certain electrolyte additives can only provide one-dimensional regulation, which is insufficient to synergistically suppress multiple failure mechanisms. This study reports a “multifunctional single-molecule” additive strategy utilizing acetaminophen (AP) to achieve ultralong-term stability of the zinc anodes. The synergistic interaction between the phenolic hydroxyl (−OH) and amide (−NHCOCH3) functional groups in AP creates a stable Zn2+ solvation environment, effectively suppressing the hydrogen evolution reaction. Concurrently, the electron-rich aromatic rings form a hydrophobic dynamic passivation interface protective layer, facilitating the reversible deposition and stripping of Zn. Consequently, the introduction of AP significantly enhances electrochemical performance, such as the Zn//Zn symmetric cell exhibits a lifespan extended to 1000 h at 1 mA cm−2 and 1 mAh cm−2, while the AZICs maintains a high specific capacity of 49.8 mAh g−1 and a Coulombic efficiency close to 100% after 60,000 cycles at a high current density of 7 A g−1. This study confirms the immense application potential of AP as an eco-friendly, multifunctional additive platform in high-performance aqueous zinc-based energy storage devices.
- Open Access
- 27 July 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (8) , e70416
Bimetallic Modified N‐Doped Carbon Nanofibers as Efficient Bifunctional Electrocatalysts in Rechargeable Zn‐Air Battery
Carbon nanofibers (CNFs), featuring interconnected network characteristics, have attracted considerable attention as electrocatalyst supports due to their tunable morphology, high specific surface area, and abundant porous structure. However, their practical application is still limited by insufficient intrinsic activity. Herein, we successfully prepared cobalt (Co) and molybdenum (Mo) co‐embedded nitrogen‐doped porous carbon nanofibers (a‐Co/Mo@NCNFs) as efficient bifunctional electrocatalysts via electrospinning followed by high‐temperature pyrolysis. The introduction of Mo as an electronic modulator can tailor the electronic structure of Co sites, thereby optimizing the adsorption/desorption behavior of oxygen‐containing intermediates. Meanwhile, the hierarchical porous architecture facilitates rapid mass/electron transport and maximizes the exposure of catalytic sites. The optimized a‐Co/Mo@NCNFs catalyst exhibits outstanding bifunctional electrocatalytic activity, delivering a half‐wave potential of 0.831 V for oxygen reduction reaction and a low overpotential of 371 mV at 10 mA cm −2 for oxygen evolution reaction. Notably, Zn‐air battery based on the catalyst achieved higher open circuit voltage and power density than the benchmark Pt/C+RuO 2 system, demonstrating its great potential as an efficient and durable alternative for energy conversion and storage applications.
- 27 July 2026
- Published by Wiley in Batteries & Supercaps
- Vol. 9 (8) , e70416
Open AccessBimetallic Modified N‐Doped Carbon Nanofibers as Efficient Bifunctional Electrocatalysts in Rechargeable Zn‐Air Battery
Carbon nanofibers (CNFs), featuring interconnected network characteristics, have attracted considerable attention as electrocatalyst supports due to their tunable morphology, high specific surface area, and abundant porous structure. However, their practical application is still limited by insufficient intrinsic activity. Herein, we successfully prepared cobalt (Co) and molybdenum (Mo) co‐embedded nitrogen‐doped porous carbon nanofibers (a‐Co/Mo@NCNFs) as efficient bifunctional electrocatalysts via electrospinning followed by high‐temperature pyrolysis. The introduction of Mo as an electronic modulator can tailor the electronic structure of Co sites, thereby optimizing the adsorption/desorption behavior of oxygen‐containing intermediates. Meanwhile, the hierarchical porous architecture facilitates rapid mass/electron transport and maximizes the exposure of catalytic sites. The optimized a‐Co/Mo@NCNFs catalyst exhibits outstanding bifunctional electrocatalytic activity, delivering a half‐wave potential of 0.831 V for oxygen reduction reaction and a low overpotential of 371 mV at 10 mA cm −2 for oxygen evolution reaction. Notably, Zn‐air battery based on the catalyst achieved higher open circuit voltage and power density than the benchmark Pt/C+RuO 2 system, demonstrating its great potential as an efficient and durable alternative for energy conversion and storage applications.
- 10 June 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (40) , e73684
Calcium‐Mediated Fe─N Bond Reinforcement for Ultra‐Stable Oxygen Reduction Reaction
The practical deployment of atomically dispersed Fe–N–C catalysts for the oxygen reduction reaction (ORR) is severely hampered by the electrochemical leaching of Fe active sites. Inspired by the stabilizing role of Ca 2+ in metalloenzyme active sites, a novel Fe–Ca dual‐atom sites catalyst (Ca/Fe–N–C) is constructed on amorphous porous carbon nanosheets. The introduced Ca atom acts as an “electronic modulator” and “structural stabilizer,” which effectively lowers the oxidation state of Fe and reinforces Fe–N coordination bond. This ingenious design results in an exceptional ORR catalyst with the half‐wave potential of 0.912 V in alkaline media and unprecedented durability, exhibiting negligible decay after 80000 cycles. When integrated into Zn‐air batteries (ZABs), the Ca/Fe–N–C‐based cathode delivers a peak power density of 215 mW cm −2 and sustains operation for exceeding 1110 h, markedly superior to benchmark Pt/C. This work not only unveils the pivotal role of alkaline‐earth metals in stabilizing transition‐metal sites but also establishes a general paradigm for designing durable atomically dispersed catalysts for advanced energy conversion devices.
- 10 June 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (40) , e73684
Calcium‐Mediated Fe─N Bond Reinforcement for Ultra‐Stable Oxygen Reduction Reaction
The practical deployment of atomically dispersed Fe–N–C catalysts for the oxygen reduction reaction (ORR) is severely hampered by the electrochemical leaching of Fe active sites. Inspired by the stabilizing role of Ca 2+ in metalloenzyme active sites, a novel Fe–Ca dual‐atom sites catalyst (Ca/Fe–N–C) is constructed on amorphous porous carbon nanosheets. The introduced Ca atom acts as an “electronic modulator” and “structural stabilizer,” which effectively lowers the oxidation state of Fe and reinforces Fe–N coordination bond. This ingenious design results in an exceptional ORR catalyst with the half‐wave potential of 0.912 V in alkaline media and unprecedented durability, exhibiting negligible decay after 80000 cycles. When integrated into Zn‐air batteries (ZABs), the Ca/Fe–N–C‐based cathode delivers a peak power density of 215 mW cm −2 and sustains operation for exceeding 1110 h, markedly superior to benchmark Pt/C. This work not only unveils the pivotal role of alkaline‐earth metals in stabilizing transition‐metal sites but also establishes a general paradigm for designing durable atomically dispersed catalysts for advanced energy conversion devices.
- 18 May 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (23) , 12275-12283
A hydrogen-bonded zwitterionic hydrogel electrolyte constructs freeze-resistant and flame-retardant flexible zinc-ion capacitors
Multifunctional hydrogel electrolytes are promising for safe and flexible Zn-based energy storage, yet simultaneously achieving mechanical robustness, wide temperature adaptability, and intrinsic flame retardancy remains a formidable challenge. Herein, a multifunctional PAM/CS/Pro hydrogel electrolyte is fabricated via free-radical polymerization by integrating chitosan (CS) and zwitterionic D-proline (Pro) into a polyacrylamide (PAM) network, utilizing levulinic acid (LA) to enable homogeneous CS incorporation and reinforce secondary interactions. Mechanistically, the Pro-derived carboxylate groups serve as zincophilic sites that coordinate Zn2+, homogenize interfacial ion flux, and promote uniform Zn deposition to suppress dendrite growth. Concurrently, the synergy between zwitterionic moieties and CS hydroxyls constructs a dense hydrogen-bond network; this effectively increases the bound water fraction to inhibit ice crystallization at subzero temperatures and mitigate dehydration at elevated temperatures. Consequently, the hydrogel exhibits high stretchability (1180% elongation), robust adhesion, and intrinsic flame retardancy (LOI = 29%, peak HRR = 118.16 kW m−2). Zn//Zn symmetric cells demonstrate stable plating/stripping for over 240 h, and flexible zinc ion capacitors (ZICs) based on this electrolyte operate reliably at −20 °C, achieving an energy density of 60.33 Wh kg−1 at a power density of 149.99 W kg−1. This work presents an integrated ion–water–thermal management strategy, offering a blueprint for designing intrinsically safe and environmentally tolerant electrolytes for next-generation wearable energy storage.
- 18 May 2026
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 18 (23) , 12275-12283
A hydrogen-bonded zwitterionic hydrogel electrolyte constructs freeze-resistant and flame-retardant flexible zinc-ion capacitors
Multifunctional hydrogel electrolytes are promising for safe and flexible Zn-based energy storage, yet simultaneously achieving mechanical robustness, wide temperature adaptability, and intrinsic flame retardancy remains a formidable challenge. Herein, a multifunctional PAM/CS/Pro hydrogel electrolyte is fabricated via free-radical polymerization by integrating chitosan (CS) and zwitterionic D-proline (Pro) into a polyacrylamide (PAM) network, utilizing levulinic acid (LA) to enable homogeneous CS incorporation and reinforce secondary interactions. Mechanistically, the Pro-derived carboxylate groups serve as zincophilic sites that coordinate Zn2+, homogenize interfacial ion flux, and promote uniform Zn deposition to suppress dendrite growth. Concurrently, the synergy between zwitterionic moieties and CS hydroxyls constructs a dense hydrogen-bond network; this effectively increases the bound water fraction to inhibit ice crystallization at subzero temperatures and mitigate dehydration at elevated temperatures. Consequently, the hydrogel exhibits high stretchability (1180% elongation), robust adhesion, and intrinsic flame retardancy (LOI = 29%, peak HRR = 118.16 kW m−2). Zn//Zn symmetric cells demonstrate stable plating/stripping for over 240 h, and flexible zinc ion capacitors (ZICs) based on this electrolyte operate reliably at −20 °C, achieving an energy density of 60.33 Wh kg−1 at a power density of 149.99 W kg−1. This work presents an integrated ion–water–thermal management strategy, offering a blueprint for designing intrinsically safe and environmentally tolerant electrolytes for next-generation wearable energy storage.
- 8 May 2026
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13 (13) , 6248-6284
Solar thermal conversion gels for atmospheric water harvesting: fundamental principles and applications
This review presents recent advances in solar thermal conversion gels for atmospheric water harvesting, including design principles and compositions, mechanisms of adsorption/desorption, optimization strategies and diverse application scenarios.
- 8 May 2026
- Published by Royal Society of Chemistry (RSC) in Materials Horizons
- Vol. 13 (13) , 6248-6284
Solar thermal conversion gels for atmospheric water harvesting: fundamental principles and applications
This review presents recent advances in solar thermal conversion gels for atmospheric water harvesting, including design principles and compositions, mechanisms of adsorption/desorption, optimization strategies and diverse application scenarios.
- 18 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (9) , 6373-6382
Environmentally Resistant, Self-Adhesive, Antifreeze, and Moisturizing Conductive Hydrogels for Flexible Strain Sensors and Human-Motion Detection
- 18 April 2026
- Published by American Chemical Society (ACS) in ACS Applied Polymer Materials
- Vol. 8 (9) , 6373-6382
Environmentally Resistant, Self-Adhesive, Antifreeze, and Moisturizing Conductive Hydrogels for Flexible Strain Sensors and Human-Motion Detection