Kevin Reath
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Kevin Reath has a total of 83 co-authors. Here are the top co-authors by number of shared publications:
- Matthew E. Pritchard
Cornell University Ithaca NY USA
4 shared publications - Francisco Delgado
Departamento de Geología, Facultad de Ciencias Físicas y Matemáticas, Universidad de Chile, Santiago, Chile
3 shared publications - Marco Bagnardi
U.S. Geological Survey, Cascades Volcano Observatory Vancouver WA USA
3 shared publications - Paul Lundgren
Jet Propulsion Laboratory California Institute of Technology Pasadena CA USA
3 shared publications - Simon Carn
Department of Geological and Mining Engineering and Sciences, Michigan Technological University, Houghton, MI, USA
3 shared publications A. Alcott
2 shared publications
Latest Publications
- Open Access
- 1 June 2021
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 126 (6)
Quantifying Eruptive and Background Seismicity, Deformation, Degassing, and Thermal Emissions at Volcanoes in the United States During 1978–2020
An important aspect of volcanic hazard assessment is determination of the level and character of background activity at a volcano so that deviations from background (called unrest) can be identified. Here, we compile the instrumentally recorded eruptive and noneruptive activity for 161 US volcanoes between 1978 and 2020. We combine monitoring data from four techniques: seismicity, ground deformation, degassing, and thermal emissions. To previous work, we add the first comprehensive survey of US volcanoes using medium‐spatial resolution satellite thermal observations, newly available field surveys of degassing, and new compilations of seismic and deformation data. We report previously undocumented thermal activity at 30 volcanoes using data from the spaceborne ASTER sensor during 2000–2020. To facilitate comparison of activity levels for all US volcanoes, we assign a numerical classification of the Activity Intensity Level for each monitoring technique, with the highest ranking corresponding to an eruption. There are 96 US volcanoes (59%) with at least one type of detected activity, but this represents a lower bound: For example, there are 12 volcanoes where degassing has been observed but has not yet been quantified. We identify dozens of volcanoes where volcanic activity is only measured by satellite (45% of all thermal observations), and other volcanoes where only ground‐based sensors have detected activity (e.g., all seismic and 62% of measured degassing observations). Our compilation provides a baseline against which future measurements can be compared, demonstrates the need for both ground‐based and remote observations, and serves as a guide for prioritizing future monitoring efforts.
- 1 June 2021
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 126 (6)
Open AccessQuantifying Eruptive and Background Seismicity, Deformation, Degassing, and Thermal Emissions at Volcanoes in the United States During 1978–2020
An important aspect of volcanic hazard assessment is determination of the level and character of background activity at a volcano so that deviations from background (called unrest) can be identified. Here, we compile the instrumentally recorded eruptive and noneruptive activity for 161 US volcanoes between 1978 and 2020. We combine monitoring data from four techniques: seismicity, ground deformation, degassing, and thermal emissions. To previous work, we add the first comprehensive survey of US volcanoes using medium‐spatial resolution satellite thermal observations, newly available field surveys of degassing, and new compilations of seismic and deformation data. We report previously undocumented thermal activity at 30 volcanoes using data from the spaceborne ASTER sensor during 2000–2020. To facilitate comparison of activity levels for all US volcanoes, we assign a numerical classification of the Activity Intensity Level for each monitoring technique, with the highest ranking corresponding to an eruption. There are 96 US volcanoes (59%) with at least one type of detected activity, but this represents a lower bound: For example, there are 12 volcanoes where degassing has been observed but has not yet been quantified. We identify dozens of volcanoes where volcanic activity is only measured by satellite (45% of all thermal observations), and other volcanoes where only ground‐based sensors have detected activity (e.g., all seismic and 62% of measured degassing observations). Our compilation provides a baseline against which future measurements can be compared, demonstrates the need for both ground‐based and remote observations, and serves as a guide for prioritizing future monitoring efforts.
- Open Access
- 4 March 2021
- Published by Copernicus GmbH
Decrease in Volcano Jet Noise Peak Frequency from Crater Expansion
Volcanic jet noise is the sound, often below the human audible range (<20 Hz and termed infrasound), generated by momentum-driven fluid flow through a volcanic vent. Assuming the self-similarity of jet flows and audible jet noise extends to infrasonic volcanic jet noise, the Strouhal number, St=Djf/Uj, connects frequency changes, f, to changes in the jet length (expanded jet diameter, Dj) and/or velocity scale (jet velocity, Uj). We examine the infrasound signal characteristics from the June 2019 VEI 4 eruptions of Raikoke, Kuril Islands and Ulawun, Papua New Guinea volcanoes with changes in crater geometry. We use data from the International Monitoring System (IMS) infrasound network and pre- and post-eruption satellite data (RADARSAT-2 and PlanetScope imaging for Raikoke and Ulawun, respectively). During both eruptions we observe a decrease in infrasound peak frequency during the transition to a Plinian phase, which remains through the end of the eruptions. The RADARSAT-2 data show a qualitative increase in the crater area at Raikoke; quantitative analysis is limited by shadows. At Ulawun, however, we estimate an increase in crater area from ~35,000 m2 on May 25, 2019 to ~66,000 m2 on July 17, 2019. We assume a constant Strouhal number and use the crater diameter as a proxy for expanded jet diameter. Our analysis suggests that the increase in crater diameter alone cannot account for the decrease in peak frequency during the Ulawun eruption. This suggests that the jet velocity also increased, which fits satellite data, and or the fluid properties (e.g. particle loading, nozzle geometry and roughness, etc.) changed. This is reasonable as the Ulawun eruption went Plinian, which likely involved an increase in jet velocity and erosion of the crater walls. This is the first study to corroborate the decrease in infrasound peak frequency with documented increase in crater area. The fortuitous satellite overpass timing, clear skies, and high spatial resolution enabled the quantitative examination of the Ulawun eruption.
- 4 March 2021
- Published by Copernicus GmbH
Open AccessDecrease in Volcano Jet Noise Peak Frequency from Crater Expansion
Volcanic jet noise is the sound, often below the human audible range (<20 Hz and termed infrasound), generated by momentum-driven fluid flow through a volcanic vent. Assuming the self-similarity of jet flows and audible jet noise extends to infrasonic volcanic jet noise, the Strouhal number, St=Djf/Uj, connects frequency changes, f, to changes in the jet length (expanded jet diameter, Dj) and/or velocity scale (jet velocity, Uj). We examine the infrasound signal characteristics from the June 2019 VEI 4 eruptions of Raikoke, Kuril Islands and Ulawun, Papua New Guinea volcanoes with changes in crater geometry. We use data from the International Monitoring System (IMS) infrasound network and pre- and post-eruption satellite data (RADARSAT-2 and PlanetScope imaging for Raikoke and Ulawun, respectively). During both eruptions we observe a decrease in infrasound peak frequency during the transition to a Plinian phase, which remains through the end of the eruptions. The RADARSAT-2 data show a qualitative increase in the crater area at Raikoke; quantitative analysis is limited by shadows. At Ulawun, however, we estimate an increase in crater area from ~35,000 m2 on May 25, 2019 to ~66,000 m2 on July 17, 2019. We assume a constant Strouhal number and use the crater diameter as a proxy for expanded jet diameter. Our analysis suggests that the increase in crater diameter alone cannot account for the decrease in peak frequency during the Ulawun eruption. This suggests that the jet velocity also increased, which fits satellite data, and or the fluid properties (e.g. particle loading, nozzle geometry and roughness, etc.) changed. This is reasonable as the Ulawun eruption went Plinian, which likely involved an increase in jet velocity and erosion of the crater walls. This is the first study to corroborate the decrease in infrasound peak frequency with documented increase in crater area. The fortuitous satellite overpass timing, clear skies, and high spatial resolution enabled the quantitative examination of the Ulawun eruption.
- Open Access
- 12 May 2020
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 125 (5)
Volcano‐Tectonic Interactions at Sabancaya Volcano, Peru: Eruptions, Magmatic Inflation, Moderate Earthquakes, and Fault Creep
We present evidence of volcano‐tectonic interactions at Sabancaya volcano that we relate to episodic magma injection and high regional fluid pore pressures. We present a surface deformation time series at Sabancaya including observations from ERS‐1/2, Envisat, Sentinel‐1, COSMO‐SkyMed, and TerraSAR‐X that spans June 1992 to February 2019. These data show deep‐seated inflation northwest of Sabancaya from 1992–1997 and 2013–2019, as well as creep and rupture on multiple faults. Afterslip on the Mojopampa fault following a 2013 MW 5.9 earthquake is anomalously long lived, continuing for at least 6 years. The best fit fault plane for the afterslip is right‐lateral motion on an EW striking fault at 1 km depth. We also model surface deformation from two 2017 earthquakes (MW 4.4 and MW 5.2) on unnamed faults, for which the best fit models are NW striking normal faults at 1–2 km depth. Our best fit model for a magmatic inflation source (13 km depth, volume change of 0.04 to 0.05 km3 yr−1) induces positive Coulomb static stress changes on these modeled fault planes. Comparing these deformation results with evidence from satellite thermal and degassing data, field observations, and seismic records, we interpret strong pre‐eruptive seismicity at Sabancaya as a consequence of magmatic intrusions destabilizing tectonic faults critically stressed by regionally high fluid pressures. High fluid pressure likely also promotes fault creep driven by static stress transfer from the inflation source. We speculate that combining high pore fluid pressures with sufficiently large, offset magmatic inflation can promote strong earthquakes during volcanic unrest.
- 12 May 2020
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 125 (5)
Open AccessVolcano‐Tectonic Interactions at Sabancaya Volcano, Peru: Eruptions, Magmatic Inflation, Moderate Earthquakes, and Fault Creep
We present evidence of volcano‐tectonic interactions at Sabancaya volcano that we relate to episodic magma injection and high regional fluid pore pressures. We present a surface deformation time series at Sabancaya including observations from ERS‐1/2, Envisat, Sentinel‐1, COSMO‐SkyMed, and TerraSAR‐X that spans June 1992 to February 2019. These data show deep‐seated inflation northwest of Sabancaya from 1992–1997 and 2013–2019, as well as creep and rupture on multiple faults. Afterslip on the Mojopampa fault following a 2013 MW 5.9 earthquake is anomalously long lived, continuing for at least 6 years. The best fit fault plane for the afterslip is right‐lateral motion on an EW striking fault at 1 km depth. We also model surface deformation from two 2017 earthquakes (MW 4.4 and MW 5.2) on unnamed faults, for which the best fit models are NW striking normal faults at 1–2 km depth. Our best fit model for a magmatic inflation source (13 km depth, volume change of 0.04 to 0.05 km3 yr−1) induces positive Coulomb static stress changes on these modeled fault planes. Comparing these deformation results with evidence from satellite thermal and degassing data, field observations, and seismic records, we interpret strong pre‐eruptive seismicity at Sabancaya as a consequence of magmatic intrusions destabilizing tectonic faults critically stressed by regionally high fluid pressures. High fluid pressure likely also promotes fault creep driven by static stress transfer from the inflation source. We speculate that combining high pore fluid pressures with sufficiently large, offset magmatic inflation can promote strong earthquakes during volcanic unrest.
- Open Access
- 14 January 2020
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 21 (1)
Using Conceptual Models to Relate Multiparameter Satellite Data to Subsurface Volcanic Processes in Latin America
Satellite data have been extensively used to identify volcanic behavior. However, the physical subsurface processes causing any individual manifestation of activity can be ambiguous. We propose a classification scheme for the cause of unrest that simultaneously considers three multiparameter satellite observations. The scheme is based on characteristics of the volcanic system (open, closed, and eruptive) and unrest mechanisms (intrusion, evolution, and withdrawal) occurring at shallow depths in the volcanic system. We applied these models to satellite observations acquired at 47 of the most active volcanoes in Latin America. Of the volcanoes studied, 44 had a robust enough dataset for classification and were clustered into 4 groups and 10 subgroups with common behavioral characteristics. By identifying that these volcanoes can be clustered into a number of groupings significantly less than the number of volcanoes, we have demonstrated that commonalities in behavior patterns exist among diverse volcanic systems. Identifying volcanoes with similar characteristics underpins the use of past observations at one volcano to forecast activity at another and diverges from typical volcanic groupings, which are focused on geologic parameters (i.e., composition, volcano type, and tectonic setting). Based on satellite data alone, we have identified preeruptive intrusion prior to 15 eruptions at 12 different volcanoes, magma evolution prior to 18 eruptions at 13 volcanoes, and magma withdrawal at 3 eruptions and 3 volcanoes. Improvements to the spatial and temporal resolution are needed to make these relations robust. This classification scheme provides a framework for future automated clustering of volcanoes.
- 14 January 2020
- Published by American Geophysical Union (AGU) in Geochemistry, Geophysics, Geosystems
- Vol. 21 (1)
Open AccessUsing Conceptual Models to Relate Multiparameter Satellite Data to Subsurface Volcanic Processes in Latin America
Satellite data have been extensively used to identify volcanic behavior. However, the physical subsurface processes causing any individual manifestation of activity can be ambiguous. We propose a classification scheme for the cause of unrest that simultaneously considers three multiparameter satellite observations. The scheme is based on characteristics of the volcanic system (open, closed, and eruptive) and unrest mechanisms (intrusion, evolution, and withdrawal) occurring at shallow depths in the volcanic system. We applied these models to satellite observations acquired at 47 of the most active volcanoes in Latin America. Of the volcanoes studied, 44 had a robust enough dataset for classification and were clustered into 4 groups and 10 subgroups with common behavioral characteristics. By identifying that these volcanoes can be clustered into a number of groupings significantly less than the number of volcanoes, we have demonstrated that commonalities in behavior patterns exist among diverse volcanic systems. Identifying volcanoes with similar characteristics underpins the use of past observations at one volcano to forecast activity at another and diverges from typical volcanic groupings, which are focused on geologic parameters (i.e., composition, volcano type, and tectonic setting). Based on satellite data alone, we have identified preeruptive intrusion prior to 15 eruptions at 12 different volcanoes, magma evolution prior to 18 eruptions at 13 volcanoes, and magma withdrawal at 3 eruptions and 3 volcanoes. Improvements to the spatial and temporal resolution are needed to make these relations robust. This classification scheme provides a framework for future automated clustering of volcanoes.
- Open Access
- 3 January 2020
- Published by Wiley in ESS Open Archive
Volcano-tectonic interactions at Sabancaya volcano, Peru: eruptions, magmatic inflation, moderate earthquakes, and fault creep
We present evidence of volcano-tectonic interactions at Sabancaya volcano that we relate to episodic magma injection and high regional fluid pore pressures. We present a surface deformation time series at Sabancaya including observations from ERS-1/2, Envisat, Sentinel-1, COSMO-SkyMed, and TerraSAR-X that spans June 1992 - February 2019. These data show deep seated inflation northwest of Sabancaya from 1992-1997 and 2013-2019, as well as creep and rupture on multiple faults. Afterslip on the Mojopampa fault following a 2013 Mw 5.9 earthquake is anomalously long-lived, continuing for at least six years. The best fit fault plane for the afterslip is right-lateral motion on an EW striking fault at 1 km depth. We also model surface deformation from two 2017 earthquakes (Mw 4.4 and Mw 5.2) on unnamed faults, for which the best fit models are NW striking normal faults at 1-2 km depth. Our best fit model for a magmatic inflation source (13 km depth, volume change of 0.04 to 0.05 km^3 yr^-1), induces positive Coulomb static stress changes on these modeled fault planes. Comparing these deformation results with evidence from satellite thermal and degassing data, field observations, and seismic records, we interpret strong pre-eruptive seismicity at Sabancaya as a consequence of magmatic intrusions destabilizing tectonic faults critically stressed by regionally high fluid pressures. High fluid pressure likely also promotes fault creep driven by static stress transfer from the inflation source. We speculate that strong seismicity near volcanoes will be most likely with high pore fluid pressures and significant, offset magmatic inflation.
- 3 January 2020
- Published by Wiley in ESS Open Archive
Open AccessVolcano-tectonic interactions at Sabancaya volcano, Peru: eruptions, magmatic inflation, moderate earthquakes, and fault creep
We present evidence of volcano-tectonic interactions at Sabancaya volcano that we relate to episodic magma injection and high regional fluid pore pressures. We present a surface deformation time series at Sabancaya including observations from ERS-1/2, Envisat, Sentinel-1, COSMO-SkyMed, and TerraSAR-X that spans June 1992 - February 2019. These data show deep seated inflation northwest of Sabancaya from 1992-1997 and 2013-2019, as well as creep and rupture on multiple faults. Afterslip on the Mojopampa fault following a 2013 Mw 5.9 earthquake is anomalously long-lived, continuing for at least six years. The best fit fault plane for the afterslip is right-lateral motion on an EW striking fault at 1 km depth. We also model surface deformation from two 2017 earthquakes (Mw 4.4 and Mw 5.2) on unnamed faults, for which the best fit models are NW striking normal faults at 1-2 km depth. Our best fit model for a magmatic inflation source (13 km depth, volume change of 0.04 to 0.05 km^3 yr^-1), induces positive Coulomb static stress changes on these modeled fault planes. Comparing these deformation results with evidence from satellite thermal and degassing data, field observations, and seismic records, we interpret strong pre-eruptive seismicity at Sabancaya as a consequence of magmatic intrusions destabilizing tectonic faults critically stressed by regionally high fluid pressures. High fluid pressure likely also promotes fault creep driven by static stress transfer from the inflation source. We speculate that strong seismicity near volcanoes will be most likely with high pore fluid pressures and significant, offset magmatic inflation.
- 1 May 2019
- Published by Elsevier in Journal of Volcanology and Geothermal Research
- Vol. 376, 62-74
The AVTOD (ASTER Volcanic Thermal Output Database) Latin America archive
- 1 May 2019
- Published by Elsevier in Journal of Volcanology and Geothermal Research
- Vol. 376, 62-74
The AVTOD (ASTER Volcanic Thermal Output Database) Latin America archive
- Open Access
- 12 January 2019
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 124 (1) , 195-218
Thermal, Deformation, and Degassing Remote Sensing Time Series (CE 2000–2017) at the 47 most Active Volcanoes in Latin America: Implications for Volcanic Systems
Volcanoes are hazardous to local and global populations, but only a fraction are continuously monitored by ground‐based sensors. For example, in Latin America, more than 60% of Holocene volcanoes are unmonitored, meaning long‐term multiparameter data sets of volcanic activity are rare and sparse. We use satellite observations of degassing, thermal anomalies, and surface deformation spanning 17 years at 47 of the most active volcanoes in Latin America and compare these data sets to ground‐based observations archived by the Global Volcanism Program. This first comparison of multisatellite time series on a regional scale provides information regarding volcanic behavior during, noneruptive, pre‐eruptive, syneruptive, and posteruptive periods. For example, at Copahue volcano, deviations from background activity in all three types of satellite measurements were manifested months to years in advance of renewed eruptive activity in 2012. By quantifying the amount of degassing, thermal output, and deformation measured at each of these volcanoes, we test the classification of these volcanoes as open or closed volcanic systems. We find that ~28% of the volcanoes do not fall into either classification, and the rest show elements of both, demonstrating a dynamic range of behavior that can change over time. Finally, we recommend how volcano monitoring could be improved through better coordination of available satellite‐based capabilities and new instruments.
- 12 January 2019
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Solid Earth
- Vol. 124 (1) , 195-218
Open AccessThermal, Deformation, and Degassing Remote Sensing Time Series (CE 2000–2017) at the 47 most Active Volcanoes in Latin America: Implications for Volcanic Systems
Volcanoes are hazardous to local and global populations, but only a fraction are continuously monitored by ground‐based sensors. For example, in Latin America, more than 60% of Holocene volcanoes are unmonitored, meaning long‐term multiparameter data sets of volcanic activity are rare and sparse. We use satellite observations of degassing, thermal anomalies, and surface deformation spanning 17 years at 47 of the most active volcanoes in Latin America and compare these data sets to ground‐based observations archived by the Global Volcanism Program. This first comparison of multisatellite time series on a regional scale provides information regarding volcanic behavior during, noneruptive, pre‐eruptive, syneruptive, and posteruptive periods. For example, at Copahue volcano, deviations from background activity in all three types of satellite measurements were manifested months to years in advance of renewed eruptive activity in 2012. By quantifying the amount of degassing, thermal output, and deformation measured at each of these volcanoes, we test the classification of these volcanoes as open or closed volcanic systems. We find that ~28% of the volcanoes do not fall into either classification, and the rest show elements of both, demonstrating a dynamic range of behavior that can change over time. Finally, we recommend how volcano monitoring could be improved through better coordination of available satellite‐based capabilities and new instruments.
- 1 July 2016
- Published by Elsevier in Journal of Volcanology and Geothermal Research
- Vol. 321, 18-30
Predicting eruptions from precursory activity using remote sensing data hybridization
- 1 July 2016
- Published by Elsevier in Journal of Volcanology and Geothermal Research
- Vol. 321, 18-30
Predicting eruptions from precursory activity using remote sensing data hybridization
- 1 September 2013
- Published by Elsevier in Journal of Volcanology and Geothermal Research
- Vol. 265, 27-38
Exploration of geothermal systems using hyperspectral thermal infrared remote sensing
- 1 September 2013
- Published by Elsevier in Journal of Volcanology and Geothermal Research
- Vol. 265, 27-38
Exploration of geothermal systems using hyperspectral thermal infrared remote sensing
- 25 June 2013
- Published by Taylor & Francis in International Journal of Remote Sensing
- Vol. 34 (20) , 7178-7198
Remote sensing and geologic mapping of glaciovolcanic deposits in the region surrounding Askja (Dyngjufjöll) volcano, Iceland
The surface geology of the Northern Volcanic Zone in Iceland is dominated by volcanic ridges, central volcanoes, shield volcanoes, and tuyas. The largest features are typically ice-confined (glaciovolcanic) in origin, and are overlain by voluminous Holocene (subaerial) lavas and glacial outwash deposits. The literature has focused heavily on prominent or very young features, neglecting small and older volcanic features. The purpose of this study is to demonstrate the application of remote-sensing mapping techniques to the glaciovolcanic environment in order to identify dominant lithologies and determine locations for textural, stratigraphic, and age studies. The deposits targeted in this study occur on and around Askja volcano, in central Iceland, including Pleistocene glaciovolcanic tuffs and subaerial pumice from the 1875 rhyolitic eruption of Askja. Data from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) were used in conjunction with previously published geologic and remote-sensing data sets and recent field work on glaciovolcanic deposits of Askja for validation. Remotely acquired data sets include aerial photographs and one ASTER scene obtained in August 2010. Visible and near-infrared (VNIR) and thermal infrared (TIR) classifications and linear deconvolution of the TIR emissivity data were performed using end-members derived from regions of interest and laboratory spectra. End-members were selected from samples of representative lithologic units within the field area, including glaciovolcanic deposits (pillow lavas, tuffs, etc.), historical deposits (1875 pumice, 1920s basaltic lavas), and Holocene basaltic lavas from Askja. The results demonstrate the potential for remote sensing-based ground cover mapping of areas of glaciovolcanic deposits relevant to palaeo-ice reconstructions in areas such as Iceland, Antarctica, and British Columbia. Remote sensing-based mapping will benefit glaciovolcanic studies, by determining the lithologic variability of these relatively inaccessible massifs and serving as an important springboard for the identification of future field sites in remote areas.
- 25 June 2013
- Published by Taylor & Francis in International Journal of Remote Sensing
- Vol. 34 (20) , 7178-7198
Remote sensing and geologic mapping of glaciovolcanic deposits in the region surrounding Askja (Dyngjufjöll) volcano, Iceland
The surface geology of the Northern Volcanic Zone in Iceland is dominated by volcanic ridges, central volcanoes, shield volcanoes, and tuyas. The largest features are typically ice-confined (glaciovolcanic) in origin, and are overlain by voluminous Holocene (subaerial) lavas and glacial outwash deposits. The literature has focused heavily on prominent or very young features, neglecting small and older volcanic features. The purpose of this study is to demonstrate the application of remote-sensing mapping techniques to the glaciovolcanic environment in order to identify dominant lithologies and determine locations for textural, stratigraphic, and age studies. The deposits targeted in this study occur on and around Askja volcano, in central Iceland, including Pleistocene glaciovolcanic tuffs and subaerial pumice from the 1875 rhyolitic eruption of Askja. Data from the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) were used in conjunction with previously published geologic and remote-sensing data sets and recent field work on glaciovolcanic deposits of Askja for validation. Remotely acquired data sets include aerial photographs and one ASTER scene obtained in August 2010. Visible and near-infrared (VNIR) and thermal infrared (TIR) classifications and linear deconvolution of the TIR emissivity data were performed using end-members derived from regions of interest and laboratory spectra. End-members were selected from samples of representative lithologic units within the field area, including glaciovolcanic deposits (pillow lavas, tuffs, etc.), historical deposits (1875 pumice, 1920s basaltic lavas), and Holocene basaltic lavas from Askja. The results demonstrate the potential for remote sensing-based ground cover mapping of areas of glaciovolcanic deposits relevant to palaeo-ice reconstructions in areas such as Iceland, Antarctica, and British Columbia. Remote sensing-based mapping will benefit glaciovolcanic studies, by determining the lithologic variability of these relatively inaccessible massifs and serving as an important springboard for the identification of future field sites in remote areas.