Lotte Mathé
Lotte Mathé has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Patrick Van Dijck
Laboratory of Molecular Cell Biology, Department of Biology, KU Leuven, Leuven, Belgium
3 shared publications - Adam F. Feyaerts
VIB-KU Leuven Center for Microbiology, 3001 Leuven, Belgium
2 shared publications - Georg Hubmann
Chair for Bioprocess Engineering, Department of Biochemical and Chemical Engineering, TU Dortmund University, Emil-Figge-Straße 66, 44227, Dortmund, Germany
2 shared publications - Johan M. Thevelein
Center for Microbiology, VIB, Leuven-Heverlee, Belgium
2 shared publications - Jorge Duitama
Systems and Computing Engineering Department Universidad de Los Andes Bogota Colombia
2 shared publications Katrien Van Dyck
VIB Center for Microbiology, KU Leuven, Leuven, Belgium
2 shared publications
Latest Publications
- Open Access
- 2 March 2018
- Published by Springer Nature in Scientific Reports
- Vol. 8 (1) , 1-10
Essential oils and their components are a class of antifungals with potent vapour-phase-mediated anti-Candida activity
Multi-resistant microorganisms continue to challenge medicine and fuel the search for new antimicrobials. Here we show that essential oils and their components are a promising class of antifungals that can have specific anti-Candida activity via their vapour-phase. We quantify the vapour-phase-mediated antimicrobial activity (VMAA) of 175 essential oils and 37 essential oil components, representing more than a 1,000 unique molecules, against C. albicans and C. glabrata in a novel vapour-phase-mediated susceptibility assay. Approximately half of the tested essential oils and their components show growth-inhibitory VMAA. Moreover, an average greater activity was observed against the intrinsically more resistant C. glabrata, with essential oil component citronellal having a highly significant differential VMAA. In contrast, representatives of each class of antifungals currently used in clinical practice showed no VMAA. The vapour-phase-mediated susceptibility assay presented here thus allows for the simple detection of VMAA and can advance the search for novel (applications of existing) antimicrobials. This study represents the first comprehensive characterisation of essential oils and their components as a unique class of antifungals with antimicrobial properties that differentiate them from existing antifungal classes.
- 2 March 2018
- Published by Springer Nature in Scientific Reports
- Vol. 8 (1) , 1-10
Open AccessEssential oils and their components are a class of antifungals with potent vapour-phase-mediated anti-Candida activity
Multi-resistant microorganisms continue to challenge medicine and fuel the search for new antimicrobials. Here we show that essential oils and their components are a promising class of antifungals that can have specific anti-Candida activity via their vapour-phase. We quantify the vapour-phase-mediated antimicrobial activity (VMAA) of 175 essential oils and 37 essential oil components, representing more than a 1,000 unique molecules, against C. albicans and C. glabrata in a novel vapour-phase-mediated susceptibility assay. Approximately half of the tested essential oils and their components show growth-inhibitory VMAA. Moreover, an average greater activity was observed against the intrinsically more resistant C. glabrata, with essential oil component citronellal having a highly significant differential VMAA. In contrast, representatives of each class of antifungals currently used in clinical practice showed no VMAA. The vapour-phase-mediated susceptibility assay presented here thus allows for the simple detection of VMAA and can advance the search for novel (applications of existing) antimicrobials. This study represents the first comprehensive characterisation of essential oils and their components as a unique class of antifungals with antimicrobial properties that differentiate them from existing antifungal classes.
- 12 July 2017
- Published by Wiley in Flavour and Fragrance Journal
- Vol. 32 (5) , 347-353
Assay and recommendations for the detection of vapour‐phase‐mediated antimicrobial activities
Antimicrobial activity assays can be carried out in aqueous solutions using multi‐well plates. However, some bioactive compounds are volatile and can cause effects at a distance. To detect such vapour‐phase‐mediated antimicrobial activity, we introduce the vapour‐phase‐mediated patch assay, a simple bioassay that uses standard microtitre plates. As a proof‐of‐principle, we use the vapour‐phase‐mediated patch assay to test a small but chemically diverse set of selected essential oils with known antifungal activities i.e. Origanum compactum, Artemisia dracunculus, Cinnamomum camphora ct linalool, Cinnamomum cassia and Melissa officinalis, as well as their corresponding major components carvacrol, estragole, linalool, trans‐cinnamaldehyde and citral, against two pathogenic Candida species. As all but one of the tested essential oils i.e. Artemisia dracunculus and its corresponding component estragole, showed vapour‐phase‐mediated antimicrobial activity, we conclude that it is a rather common characteristic of essential oils and their components, that should always be taken into consideration. Additionally, we provide suggestions to prevent false positive results due to possible vapour‐phase‐mediated antimicrobial activities in bioactivity tests.
- 12 July 2017
- Published by Wiley in Flavour and Fragrance Journal
- Vol. 32 (5) , 347-353
Assay and recommendations for the detection of vapour‐phase‐mediated antimicrobial activities
Antimicrobial activity assays can be carried out in aqueous solutions using multi‐well plates. However, some bioactive compounds are volatile and can cause effects at a distance. To detect such vapour‐phase‐mediated antimicrobial activity, we introduce the vapour‐phase‐mediated patch assay, a simple bioassay that uses standard microtitre plates. As a proof‐of‐principle, we use the vapour‐phase‐mediated patch assay to test a small but chemically diverse set of selected essential oils with known antifungal activities i.e. Origanum compactum, Artemisia dracunculus, Cinnamomum camphora ct linalool, Cinnamomum cassia and Melissa officinalis, as well as their corresponding major components carvacrol, estragole, linalool, trans‐cinnamaldehyde and citral, against two pathogenic Candida species. As all but one of the tested essential oils i.e. Artemisia dracunculus and its corresponding component estragole, showed vapour‐phase‐mediated antimicrobial activity, we conclude that it is a rather common characteristic of essential oils and their components, that should always be taken into consideration. Additionally, we provide suggestions to prevent false positive results due to possible vapour‐phase‐mediated antimicrobial activities in bioactivity tests.
- Open Access
- 25 August 2013
- Published by Springer Nature in Current Genetics
- Vol. 59 (4) , 251-264
Recent insights into Candida albicans biofilm resistance mechanisms
Like other microorganisms, free-living Candida albicans is mainly present in a three-dimensional multicellular structure, which is called a biofilm, rather than in a planktonic form. Candida albicans biofilms can be isolated from both abiotic and biotic surfaces at various locations within the host. As the number of abiotic implants, mainly bloodstream and urinary catheters, has been increasing, the number of biofilm-associated bloodstream or urogenital tract infections is also strongly increasing resulting in a raise in mortality. Cells within a biofilm structure show a reduced susceptibility to specific commonly used antifungals and, in addition, it has recently been shown that such cells are less sensitive to killing by components of our immune system. In this review, we summarize the most important insights in the mechanisms underlying biofilm-associated antifungal drug resistance and immune evasion strategies, focusing on the most recent advances in this area of research.
- 25 August 2013
- Published by Springer Nature in Current Genetics
- Vol. 59 (4) , 251-264
Open AccessRecent insights into Candida albicans biofilm resistance mechanisms
Like other microorganisms, free-living Candida albicans is mainly present in a three-dimensional multicellular structure, which is called a biofilm, rather than in a planktonic form. Candida albicans biofilms can be isolated from both abiotic and biotic surfaces at various locations within the host. As the number of abiotic implants, mainly bloodstream and urinary catheters, has been increasing, the number of biofilm-associated bloodstream or urogenital tract infections is also strongly increasing resulting in a raise in mortality. Cells within a biofilm structure show a reduced susceptibility to specific commonly used antifungals and, in addition, it has recently been shown that such cells are less sensitive to killing by components of our immune system. In this review, we summarize the most important insights in the mechanisms underlying biofilm-associated antifungal drug resistance and immune evasion strategies, focusing on the most recent advances in this area of research.
- Open Access
- 11 June 2013
- Published by Springer Nature in Biotechnology for Biofuels
- Vol. 6 (1) , 87
Identification of multiple interacting alleles conferring low glycerol and high ethanol yield in Saccharomyces cerevisiae ethanolic fermentation
Background: Genetic engineering of industrial microorganisms often suffers from undesirable side effects on essential functions. Reverse engineering is an alternative strategy to improve multifactorial traits like low glycerol/high ethanol yield in yeast fermentation. Previous rational engineering of this trait always affected essential functions like growth and stress tolerance. We have screened Saccharomyces cerevisiae biodiversity for specific alleles causing lower glycerol/higher ethanol yield, assuming higher compatibility with normal cellular functionality. Previous work identified ssk1 E330N…K356N as causative allele in strain CBS6412, which displayed the lowest glycerol/ethanol ratio. Results: We have now identified a unique segregant, 26B, that shows similar low glycerol/high ethanol production as the superior parent, but lacks the ssk1 E330N…K356N allele. Using segregants from the backcross of 26B with the inferior parent strain, we applied pooled-segregant whole-genome sequence analysis and identified three minor quantitative trait loci (QTLs) linked to low glycerol/high ethanol production. Within these QTLs, we identified three novel alleles of known regulatory and structural genes of glycerol metabolism, smp1 R110Q,P269Q , hot1 P107S,H274Y and gpd1 L164P as causative genes. All three genes separately caused a significant drop in the glycerol/ethanol production ratio, while gpd1 L164P appeared to be epistatically suppressed by other alleles in the superior parent. The order of potency in reducing the glycerol/ethanol ratio of the three alleles was: gpd1 L164P > hot1 P107S,H274Y ≥ smp1 R110Q,P269Q . Conclusions: Our results show that natural yeast strains harbor multiple specific alleles of genes controlling essential functions, that are apparently compatible with survival in the natural environment. These newly identified alleles can be used as gene tools for engineering industrial yeast strains with multiple subtle changes, minimizing the risk of negatively affecting other essential functions. The gene tools act at the transcriptional, regulatory or structural gene level, distributing the impact over multiple targets and thus further minimizing possible side-effects. In addition, the results suggest polygenic analysis of complex traits as a promising new avenue to identify novel components involved in cellular functions, including those important in industrial applications.
- 11 June 2013
- Published by Springer Nature in Biotechnology for Biofuels
- Vol. 6 (1) , 87
Open AccessIdentification of multiple interacting alleles conferring low glycerol and high ethanol yield in Saccharomyces cerevisiae ethanolic fermentation
Background: Genetic engineering of industrial microorganisms often suffers from undesirable side effects on essential functions. Reverse engineering is an alternative strategy to improve multifactorial traits like low glycerol/high ethanol yield in yeast fermentation. Previous rational engineering of this trait always affected essential functions like growth and stress tolerance. We have screened Saccharomyces cerevisiae biodiversity for specific alleles causing lower glycerol/higher ethanol yield, assuming higher compatibility with normal cellular functionality. Previous work identified ssk1 E330N…K356N as causative allele in strain CBS6412, which displayed the lowest glycerol/ethanol ratio. Results: We have now identified a unique segregant, 26B, that shows similar low glycerol/high ethanol production as the superior parent, but lacks the ssk1 E330N…K356N allele. Using segregants from the backcross of 26B with the inferior parent strain, we applied pooled-segregant whole-genome sequence analysis and identified three minor quantitative trait loci (QTLs) linked to low glycerol/high ethanol production. Within these QTLs, we identified three novel alleles of known regulatory and structural genes of glycerol metabolism, smp1 R110Q,P269Q , hot1 P107S,H274Y and gpd1 L164P as causative genes. All three genes separately caused a significant drop in the glycerol/ethanol production ratio, while gpd1 L164P appeared to be epistatically suppressed by other alleles in the superior parent. The order of potency in reducing the glycerol/ethanol ratio of the three alleles was: gpd1 L164P > hot1 P107S,H274Y ≥ smp1 R110Q,P269Q . Conclusions: Our results show that natural yeast strains harbor multiple specific alleles of genes controlling essential functions, that are apparently compatible with survival in the natural environment. These newly identified alleles can be used as gene tools for engineering industrial yeast strains with multiple subtle changes, minimizing the risk of negatively affecting other essential functions. The gene tools act at the transcriptional, regulatory or structural gene level, distributing the impact over multiple targets and thus further minimizing possible side-effects. In addition, the results suggest polygenic analysis of complex traits as a promising new avenue to identify novel components involved in cellular functions, including those important in industrial applications.
- Open Access
- 18 March 2013
- Published by Elsevier in Metabolic Engineering
- Vol. 17, 68-81
Quantitative trait analysis of yeast biodiversity yields novel gene tools for metabolic engineering
- 18 March 2013
- Published by Elsevier in Metabolic Engineering
- Vol. 17, 68-81
Open AccessQuantitative trait analysis of yeast biodiversity yields novel gene tools for metabolic engineering