Michael Herrenbauer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Michael Herrenbauer has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Peter Czermak
Institute of Bioprocess Engineering and Pharmaceutical Technology (IBPT), University of Applied Sciences Mittelhessen (THM), Wiesenstraße 14, 35390 Giessen, Germany
3 shared publications Clemens Posten
Universität Karlsruhe (TH)
2 shared publications- Clemens Posten
Institute of Mechanical Process Engineering and Mechanics, Karlsruhe Institute of Technology, 76131 Karlsruhe, Germany
2 shared publications Colin Awungacha Lekelefac
Institute of Bioprocess Engineering and Pharmaceutical Technology, University of Applied Sciences Mittelhessen, 35390 Giessen, Germany
2 shared publicationsErich Steiner
Innovative Applications of the Printing Technologies, Stuttgart Media University, Stuttgart, Germany
2 shared publicationsKarsten Schmidt
Universität Karlsruhe (TH)
2 shared publications
Latest Publications
- Open Access
Challenges of Alginate-Based Cast Films in Plastic-Free Food Packaging Applications: An Overview
This review investigates the potential of sodium alginate, a biobased polysaccharide from brown algae, for food packaging applications. It analyzes the main challenges of cast films, including water vapor permeability, mechanical performance, and processability, and evaluates strategies to enhance these properties without chemical modification. Chemical modification is excluded because it would classify alginate as a plastic under EU regulations (PPWR, SUPD), conflicting with plastic-free packaging. The review synthesizes literature from 2004 to 2025 on pure sodium alginate films that are plasticized and ionically crosslinked without additional modifiers or nanofillers. While alginate provides excellent oxygen and fat barriers, its high water vapor permeability and brittleness limit broader use. Ionic crosslinking improves strength and water resistance, yet non-uniform networks remain a key challenge. Film performance is also influenced by drying temperature, mixing speed, molecular weight, and protein incorporation. This review differs from previous studies by highlighting the coupled effects of plasticization, ionic crosslinking, and processing limitations that together determine alginate’s industrial feasibility. Research gaps concern long-term stability and behavior under industrial packaging conditions. Given environmental and regulatory pressures to replace fossil-based plastics, sodium alginate shows strong potential as a scalable, renewable material for sustainable food packaging.
Open AccessChallenges of Alginate-Based Cast Films in Plastic-Free Food Packaging Applications: An Overview
This review investigates the potential of sodium alginate, a biobased polysaccharide from brown algae, for food packaging applications. It analyzes the main challenges of cast films, including water vapor permeability, mechanical performance, and processability, and evaluates strategies to enhance these properties without chemical modification. Chemical modification is excluded because it would classify alginate as a plastic under EU regulations (PPWR, SUPD), conflicting with plastic-free packaging. The review synthesizes literature from 2004 to 2025 on pure sodium alginate films that are plasticized and ionically crosslinked without additional modifiers or nanofillers. While alginate provides excellent oxygen and fat barriers, its high water vapor permeability and brittleness limit broader use. Ionic crosslinking improves strength and water resistance, yet non-uniform networks remain a key challenge. Film performance is also influenced by drying temperature, mixing speed, molecular weight, and protein incorporation. This review differs from previous studies by highlighting the coupled effects of plasticization, ionic crosslinking, and processing limitations that together determine alginate’s industrial feasibility. Research gaps concern long-term stability and behavior under industrial packaging conditions. Given environmental and regulatory pressures to replace fossil-based plastics, sodium alginate shows strong potential as a scalable, renewable material for sustainable food packaging.
- 6 July 2020
- Published by Springer Nature in Applied Physics A
- Vol. 126 (8) , 1-15
Passivation capability of carbon black layers for screen-printed battery applications with Ag current collectors
- 6 July 2020
- Published by Springer Nature in Applied Physics A
- Vol. 126 (8) , 1-15
Passivation capability of carbon black layers for screen-printed battery applications with Ag current collectors
- 21 August 2019
- Published by IOP Publishing in Flexible and Printed Electronics
- Vol. 4 (3) , 035003
The effect of electrode calendering on the performance of fully printed Zn∣MnO 2 batteries
Primary zinc–carbon batteries with a coplanar battery architecture were prepared by screen printing. Prior to battery activation by printing of an acidic zinc chloride electrolyte, printed zinc and manganese dioxide electrodes were compacted by calendering. Material densification of the electodes resulted in electrode layer thickness reduction on both sides, modified micropore surface area and volume on the cathode side. Galvanostatic impedance measurements and chronopotentiometry were used to characterise fabricated batteries with the individually prepared electrode configurations. While calendering of both electrodes of the batteries showed adverse effects by an increase of internal resistances and a reduction of discharge capacities, exclusive calendering of the zinc anode increased the active material utilisation by electrochemical cell reaction and thus the discharge efficiency of the battery.
- 21 August 2019
- Published by IOP Publishing in Flexible and Printed Electronics
- Vol. 4 (3) , 035003
The effect of electrode calendering on the performance of fully printed Zn∣MnO 2 batteries
Primary zinc–carbon batteries with a coplanar battery architecture were prepared by screen printing. Prior to battery activation by printing of an acidic zinc chloride electrolyte, printed zinc and manganese dioxide electrodes were compacted by calendering. Material densification of the electodes resulted in electrode layer thickness reduction on both sides, modified micropore surface area and volume on the cathode side. Galvanostatic impedance measurements and chronopotentiometry were used to characterise fabricated batteries with the individually prepared electrode configurations. While calendering of both electrodes of the batteries showed adverse effects by an increase of internal resistances and a reduction of discharge capacities, exclusive calendering of the zinc anode increased the active material utilisation by electrochemical cell reaction and thus the discharge efficiency of the battery.
- Open Access
- 1 January 2015
- Published by Wiley in International Journal of Photoenergy
- Vol. 2015, 1-18
Photocatalytic Based Degradation Processes of Lignin Derivatives
Photocatalysis, belonging to the advanced oxidation processes (AOPs), is a potential new transformation technology for lignin derivatives to value added products (e.g., phenol, benzene, toluene, and xylene). Moreover, lignin represents the only viable source to produce aromatic compounds as fossil fuel alternative. This review covers recent advancement made in the photochemical transformation of industrial lignins. It starts with the photochemical reaction principle followed by results obtained by varying process parameters. In this context, influences of photocatalysts, metal ions, additives, lignin concentration, and illumination intensity and the influence of pH are presented and discussed. Furthermore, an overview is given on several used process analytical methods describing the results obtained from the degradation of lignin derivatives. Finally, a promising concept by coupling photocatalysis with a consecutive biocatalytic process was briefly reviewed.
- 1 January 2015
- Published by Wiley in International Journal of Photoenergy
- Vol. 2015, 1-18
Open AccessPhotocatalytic Based Degradation Processes of Lignin Derivatives
Photocatalysis, belonging to the advanced oxidation processes (AOPs), is a potential new transformation technology for lignin derivatives to value added products (e.g., phenol, benzene, toluene, and xylene). Moreover, lignin represents the only viable source to produce aromatic compounds as fossil fuel alternative. This review covers recent advancement made in the photochemical transformation of industrial lignins. It starts with the photochemical reaction principle followed by results obtained by varying process parameters. In this context, influences of photocatalysts, metal ions, additives, lignin concentration, and illumination intensity and the influence of pH are presented and discussed. Furthermore, an overview is given on several used process analytical methods describing the results obtained from the degradation of lignin derivatives. Finally, a promising concept by coupling photocatalysis with a consecutive biocatalytic process was briefly reviewed.
- Open Access
- 1 January 2014
- Published by Wiley in International Journal of Photoenergy
- Vol. 2014, 1-10
Photocatalytic Active Coatings for Lignin Degradation in a Continuous Packed Bed Reactor
The synthesis of immobilized catalyst on porous glass support material via the sol-gel route is reported. TiO2-P25-SiO2+ Pt, TiO2-P25-SiO2, TiOSO4_30.6 wt%, and ZnO + TiO2-P25-SiO2catalysts were synthesized and a comparative study is done regarding morphology of coatings, degradation rates, reaction rates, dissolved carbon (DC), formation of peaks, and fluorescence of products formed from the photocatalytic degradation of lignin sulfonate obtained from a local paper plant. Through simultaneous reaction-extraction pathways applying dialysis filtration and highly porous polystyrene divinylbenzene adsorbent resin (HR-P) for solid phase extraction (SPE), an attempt has been made to isolate smaller molecules produced from photocatalytic degradation. Moreover relatively high lignin sulfonate (0.5 g/L) concentrations are used in the reactions. UV-Vis spectroscopy revealed a faster reduction in the concentration values for the aliphatic moiety compared to the aromatic moiety. Peaks were observed by both fluorescence spectroscopy and HPLC suggesting the production of new substances and fluorophores.
- 1 January 2014
- Published by Wiley in International Journal of Photoenergy
- Vol. 2014, 1-10
Open AccessPhotocatalytic Active Coatings for Lignin Degradation in a Continuous Packed Bed Reactor
The synthesis of immobilized catalyst on porous glass support material via the sol-gel route is reported. TiO2-P25-SiO2+ Pt, TiO2-P25-SiO2, TiOSO4_30.6 wt%, and ZnO + TiO2-P25-SiO2catalysts were synthesized and a comparative study is done regarding morphology of coatings, degradation rates, reaction rates, dissolved carbon (DC), formation of peaks, and fluorescence of products formed from the photocatalytic degradation of lignin sulfonate obtained from a local paper plant. Through simultaneous reaction-extraction pathways applying dialysis filtration and highly porous polystyrene divinylbenzene adsorbent resin (HR-P) for solid phase extraction (SPE), an attempt has been made to isolate smaller molecules produced from photocatalytic degradation. Moreover relatively high lignin sulfonate (0.5 g/L) concentrations are used in the reactions. UV-Vis spectroscopy revealed a faster reduction in the concentration values for the aliphatic moiety compared to the aromatic moiety. Peaks were observed by both fluorescence spectroscopy and HPLC suggesting the production of new substances and fluorophores.
- Open Access
- 28 October 2013
- Published by Wiley in International Journal of Photoenergy
- Vol. 2013, 1-9
Evaluation of Photocatalytic Active Coatings on Sintered Glass Tubes by Methylene Blue
A comparative study between ten different photocatalytic active coatings was done. The effectiveness and photocatalytic activity of the coatings were studied by degradation experiments of methylene blue (MB) dye under UV light illumination. The reactor design consisting of sintered glass packed in a borosilicate tube placed between two planar dielectric barrier discharge lamps (Osram Planon) is reported for the first time. The coatings consisted of either titania, silica, or zinc on sintered borosilicate glass. The advantage of sol-gel in catalyst preparation was exploited to combine catalyst to act as cocatalyst. TiO2-P25 widely applied in suspension systems was effectively immobilized on sintered glass support with the aid of tetraethylorthosilicate (TEOS) solution which acted as support material. Results indicated that TiO2-P25+SiO2, TiO2-P25+SiO2+Pt, and TiOSO4_30,6wt% films showed highest degradation rates close to 100% after 90 min illumination with degradation rates exceeding 50% after 30 minutes. TTIP+Pt showed lowest degradation rate.
- 28 October 2013
- Published by Wiley in International Journal of Photoenergy
- Vol. 2013, 1-9
Open AccessEvaluation of Photocatalytic Active Coatings on Sintered Glass Tubes by Methylene Blue
A comparative study between ten different photocatalytic active coatings was done. The effectiveness and photocatalytic activity of the coatings were studied by degradation experiments of methylene blue (MB) dye under UV light illumination. The reactor design consisting of sintered glass packed in a borosilicate tube placed between two planar dielectric barrier discharge lamps (Osram Planon) is reported for the first time. The coatings consisted of either titania, silica, or zinc on sintered borosilicate glass. The advantage of sol-gel in catalyst preparation was exploited to combine catalyst to act as cocatalyst. TiO2-P25 widely applied in suspension systems was effectively immobilized on sintered glass support with the aid of tetraethylorthosilicate (TEOS) solution which acted as support material. Results indicated that TiO2-P25+SiO2, TiO2-P25+SiO2+Pt, and TiOSO4_30,6wt% films showed highest degradation rates close to 100% after 90 min illumination with degradation rates exceeding 50% after 30 minutes. TTIP+Pt showed lowest degradation rate.
- 28 June 2004
- Published by Wiley in Chemie Ingenieur Technik
- Vol. 76 (7) , 1017-1021
Molekulardynamische Simulationen zum Einfluss polycyclischer aromatischer Kohlenwasserstoffe (PAK) auf Phospholipid-Membranen
- 28 June 2004
- Published by Wiley in Chemie Ingenieur Technik
- Vol. 76 (7) , 1017-1021
Molekulardynamische Simulationen zum Einfluss polycyclischer aromatischer Kohlenwasserstoffe (PAK) auf Phospholipid-Membranen
- 1 August 2001
- Published by Springer Nature in Journal of Applied Phycology
- Vol. 13 (4) , 325-333
Light distribution in a novel photobioreactor – modelling for optimization
- 1 August 2001
- Published by Springer Nature in Journal of Applied Phycology
- Vol. 13 (4) , 325-333
Light distribution in a novel photobioreactor – modelling for optimization
- 1 September 1999
- Published by Elsevier in Chemical Engineering and Processing - Process Intensification
- Vol. 38 (4-6) , 517-523
Design of a photo-bioreactor for modelling purposes
- 1 September 1999
- Published by Elsevier in Chemical Engineering and Processing - Process Intensification
- Vol. 38 (4-6) , 517-523
Design of a photo-bioreactor for modelling purposes
- Open Access
- 1 July 1999
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 32 (2) , 7563-7567
Stirred Draft Tube Photo-Bioreactor for Modelling of Growth and Product Formation by Microalgae
- 1 July 1999
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 32 (2) , 7563-7567
Open AccessStirred Draft Tube Photo-Bioreactor for Modelling of Growth and Product Formation by Microalgae