Cesare Saccani
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Cesare Saccani has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
- Marco Pellegrini
Department of Industrial Engineering (DIN), University of Bologna, Viale Risorgimento, 2, 40136 Bologna, Italy
21 shared publications - Alessandro Guzzini
Department of Industrial Engineering (DIN), University of Bologna, Viale Risorgimento, 2, 40136 Bologna, Italy
10 shared publications - Augusto Bianchini
University of Bologna
9 shared publications - Arash Aghakhani
Department of Industrial Engineering, University of Bologna, 40136 Bologna, Italy
2 shared publications A. Cocchi
1 shared publicationAdrian Dudek
1 shared publication
Latest Publications
- Open Access
- 7 September 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (17) , 7809
Environmental Life Cycle Assessment of Innovative Ejectors Plant Technology for Sediment By-Pass in Harbours and Ports
Sedimentation is the natural process of sediment transportation and deposition in quiescent water conditions. Sedimentation can affect the functionality of ports, harbours and navigation channels by reducing water depth, making navigation difficult, if not impossible. Different solutions are available to guarantee infrastructure functionality against sedimentation, with maintenance dredging being the most widely adopted. Alternative technologies for dredging have been developed and tested to reduce the environmental concerns related to dredging operations. Among other solutions, applying a sediment by-pass system based on a jet pump emerged as one of the most promising. While the existing literature covers the techno-economic aspects of sediment by-pass systems, the environmental impacts must be better evaluated and assessed. This paper aims to resolve this gap by evaluating, through the ReCiPe2016 life cycle assessment (LCA) methodology, the environmental impact of an innovative sediment by-pass system called an “ejectors plant”. The LCA results are based on the demonstrator established in Cervia Harbour in Italy, which was extensively monitored for 15 months during its operation. This paper shows how energy consumption during the operation phase highly affects the considered midpoint and endpoint categories. For example, the GWP100 of the ejectors plant, considering the Italian electricity mix, equals 1.75 million tons of equivalent CO2 over 20 years, while under a low-carbon scenario, it is reduced to 0.17. In that case, material consumption in the construction phase becomes dominant, thus highlighting the importance of eco-innovation of ejectors plants to minimise oxidant formation. Finally, this paper compares the ejectors plant and traditional dredging through environmental LCA. The ejectors plant had a lower impact in all categories except for GWP-related categories. The sensitivity analysis showed how such a conclusion may be mitigated by considering different electricity mixes and maintenance dredging working cycles.
- 7 September 2024
- Published by MDPI AG in Sustainability
- Vol. 16 (17) , 7809
Open AccessEnvironmental Life Cycle Assessment of Innovative Ejectors Plant Technology for Sediment By-Pass in Harbours and Ports
Sedimentation is the natural process of sediment transportation and deposition in quiescent water conditions. Sedimentation can affect the functionality of ports, harbours and navigation channels by reducing water depth, making navigation difficult, if not impossible. Different solutions are available to guarantee infrastructure functionality against sedimentation, with maintenance dredging being the most widely adopted. Alternative technologies for dredging have been developed and tested to reduce the environmental concerns related to dredging operations. Among other solutions, applying a sediment by-pass system based on a jet pump emerged as one of the most promising. While the existing literature covers the techno-economic aspects of sediment by-pass systems, the environmental impacts must be better evaluated and assessed. This paper aims to resolve this gap by evaluating, through the ReCiPe2016 life cycle assessment (LCA) methodology, the environmental impact of an innovative sediment by-pass system called an “ejectors plant”. The LCA results are based on the demonstrator established in Cervia Harbour in Italy, which was extensively monitored for 15 months during its operation. This paper shows how energy consumption during the operation phase highly affects the considered midpoint and endpoint categories. For example, the GWP100 of the ejectors plant, considering the Italian electricity mix, equals 1.75 million tons of equivalent CO2 over 20 years, while under a low-carbon scenario, it is reduced to 0.17. In that case, material consumption in the construction phase becomes dominant, thus highlighting the importance of eco-innovation of ejectors plants to minimise oxidant formation. Finally, this paper compares the ejectors plant and traditional dredging through environmental LCA. The ejectors plant had a lower impact in all categories except for GWP-related categories. The sensitivity analysis showed how such a conclusion may be mitigated by considering different electricity mixes and maintenance dredging working cycles.
- Open Access
- 2 March 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 67, 1295-1307
Hydrogen blending effect on fiscal and metrological instrumentation: A review
- 2 March 2024
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 67, 1295-1307
Open AccessHydrogen blending effect on fiscal and metrological instrumentation: A review
- 15 July 2023
- Published by Springer Nature
- p. 469-476
Sustainability of Medical Gowns Supply Chain Management in the Post-covid Era
- 15 July 2023
- Published by Springer Nature
- p. 469-476
Sustainability of Medical Gowns Supply Chain Management in the Post-covid Era
- 2 May 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 48 (77) , 30170-30190
Direct carbon footprint of hydrogen generation via PEM and alkaline electrolysers using various electrical energy sources and considering cell characteristics
- 2 May 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 48 (77) , 30170-30190
Direct carbon footprint of hydrogen generation via PEM and alkaline electrolysers using various electrical energy sources and considering cell characteristics
- Open Access
- 21 January 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (3) , 2080
A New Geographic Information System (GIS) Tool for Hydrogen Value Chain Planning Optimization: Application to Italian Highways
Optimizing the hydrogen value chain is essential to ensure hydrogen market uptake in replacing traditional fossil fuel energy and to achieve energy system decarbonization in the next years. The design of new plants and infrastructures will be the first step. However, wrong decisions would result in temporal, economic losses and, in the worst case, failures. Because huge investments are expected, decision makers have to be assisted for its success. Because no tools are available for the optimum design and geographical location of power to gas (P2G) and power to hydrogen (P2H) plants, the geographic information system (GIS) and mathematical optimization approaches were combined into a new tool developed by CNR-ITAE and the University of Bologna in the SuperP2G project, aiming to support the interested stakeholders in the investigation and selection of the optimum size, location, and operations of P2H and P2G industrial plants while minimizing the levelized cost of hydrogen (LCOH). In the present study, the tool has been applied to hydrogen mobility, specifically to investigate the conversion of the existing refuelling stations on Italian highways to hydrogen refuelling stations (HRSs). Middle-term (2030) and long-term (2050) scenarios were investigated. In 2030, a potential demand of between 7000 and 10,000 tons/year was estimated in Italy, increasing to between 32,600 and 72,500 tons/year in 2050. The optimum P2H plant configuration to supply the HRS was calculated in different scenarios. Despite the optimization, even if the levelized cost of hydrogen (LCOH) reduces from 7.0–7.5 €/kg in 2030 to 5.6–6.2 €/kg in 2050, the results demonstrate that the replacement of the traditional fuels, i.e., gasoline, diesel, and liquefied petroleum gases (LPGs), will be disadvantaged without incentives or any other economic supporting schemes.
- 21 January 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (3) , 2080
Open AccessA New Geographic Information System (GIS) Tool for Hydrogen Value Chain Planning Optimization: Application to Italian Highways
Optimizing the hydrogen value chain is essential to ensure hydrogen market uptake in replacing traditional fossil fuel energy and to achieve energy system decarbonization in the next years. The design of new plants and infrastructures will be the first step. However, wrong decisions would result in temporal, economic losses and, in the worst case, failures. Because huge investments are expected, decision makers have to be assisted for its success. Because no tools are available for the optimum design and geographical location of power to gas (P2G) and power to hydrogen (P2H) plants, the geographic information system (GIS) and mathematical optimization approaches were combined into a new tool developed by CNR-ITAE and the University of Bologna in the SuperP2G project, aiming to support the interested stakeholders in the investigation and selection of the optimum size, location, and operations of P2H and P2G industrial plants while minimizing the levelized cost of hydrogen (LCOH). In the present study, the tool has been applied to hydrogen mobility, specifically to investigate the conversion of the existing refuelling stations on Italian highways to hydrogen refuelling stations (HRSs). Middle-term (2030) and long-term (2050) scenarios were investigated. In 2030, a potential demand of between 7000 and 10,000 tons/year was estimated in Italy, increasing to between 32,600 and 72,500 tons/year in 2050. The optimum P2H plant configuration to supply the HRS was calculated in different scenarios. Despite the optimization, even if the levelized cost of hydrogen (LCOH) reduces from 7.0–7.5 €/kg in 2030 to 5.6–6.2 €/kg in 2050, the results demonstrate that the replacement of the traditional fuels, i.e., gasoline, diesel, and liquefied petroleum gases (LPGs), will be disadvantaged without incentives or any other economic supporting schemes.
- Open Access
- 25 May 2022
- Published by MDPI AG in Atmosphere
- Vol. 13 (6) , 866
Modification of Fraser’s Method for the Atmospheric CO2 Mass Estimation by Using Satellite Data
One of the most critical greenhouse gases in the atmosphere is carbon dioxide (CO2) due to its long-lasting and negative impact on climate change. The global atmospheric monthly mean CO2 concentration is currently greater than 410 ppm which has changed dramatically since the industrial era. To choose suitable climate change mitigation and adaptation strategies it is necessary to define carbon dioxide mass distribution and global atmospheric carbon dioxide mass. The available method to estimate the global atmospheric CO2 mass was proposed in 1980. In this study, to increase the accuracy of the available method, various observation platforms such as ground-based stations, ground-based tall towers, aircrafts, balloons, ships, and satellites are compared to define the best available observations, considering the temporal and spatial resolution. In the method proposed in this study, satellite observations (OCO2 data), from January 2019 to December 2021, are used to estimate atmospheric CO2 mass. The global atmospheric CO2 mass is estimated around 3.24 × 1015 kg in 2021. For the sake of comparison, global atmospheric CO2 mass was estimated by Fraser’s method using NOAA data for the mentioned study period. The proposed methodology in this study estimated slightly greater amounts of CO2 in comparison to Fraser’s method. This comparison resulted in 1.23% and 0.15% maximum and average difference, respectively, between the proposed method and Fraser’s method. The proposed method can be used to estimate the required capacity of systems for carbon capturing and can be applied to smaller districts to find the most critical locations in the world to plan for climate change mitigation and adaptation.
- 25 May 2022
- Published by MDPI AG in Atmosphere
- Vol. 13 (6) , 866
Open AccessModification of Fraser’s Method for the Atmospheric CO2 Mass Estimation by Using Satellite Data
One of the most critical greenhouse gases in the atmosphere is carbon dioxide (CO2) due to its long-lasting and negative impact on climate change. The global atmospheric monthly mean CO2 concentration is currently greater than 410 ppm which has changed dramatically since the industrial era. To choose suitable climate change mitigation and adaptation strategies it is necessary to define carbon dioxide mass distribution and global atmospheric carbon dioxide mass. The available method to estimate the global atmospheric CO2 mass was proposed in 1980. In this study, to increase the accuracy of the available method, various observation platforms such as ground-based stations, ground-based tall towers, aircrafts, balloons, ships, and satellites are compared to define the best available observations, considering the temporal and spatial resolution. In the method proposed in this study, satellite observations (OCO2 data), from January 2019 to December 2021, are used to estimate atmospheric CO2 mass. The global atmospheric CO2 mass is estimated around 3.24 × 1015 kg in 2021. For the sake of comparison, global atmospheric CO2 mass was estimated by Fraser’s method using NOAA data for the mentioned study period. The proposed methodology in this study estimated slightly greater amounts of CO2 in comparison to Fraser’s method. This comparison resulted in 1.23% and 0.15% maximum and average difference, respectively, between the proposed method and Fraser’s method. The proposed method can be used to estimate the required capacity of systems for carbon capturing and can be applied to smaller districts to find the most critical locations in the world to plan for climate change mitigation and adaptation.
- Open Access
- 28 January 2022
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 10 (2) , 182
The Environmental Effects of the Innovative Ejectors Plant Technology for the Eco-Friendly Sediment Management in Harbors
A sediment bypassing plant based on innovative jet pump, ejectors, has been tested in the first-of-a-kind demo application at the harbor of Cervia (Italy, Northern Adriatic Sea). The ejector is a jet pump aimed to reduce sediment accumulation in navigation channels and coastal areas. Herein we present results of the first study assessing the potential ecological effects of the ejectors plant. Sediment characteristics, benthic, and fish assemblages before and after the plant activation have been analyzed in the putatively impacted (the sediment removal and discharge) areas and four control locations, one time before and two times after plant activation. Ejectors plant operation resulted in a reduction of the mud and organic matter content in the sediment, as well as in changes in shell debris amount in the impacted areas. Abundance and species richness of benthic macroinvertebrates, initially reduced in the impacted areas, probably due to the previous repeated dredging, returned to higher values during demo plant continuous operation. Higher diversity of fish fauna was observed in the study area during plant operation period. Observed dynamics of the ecological status of the marine habitat suggest that an ejectors plant could represent an eco-friendly solution alternative to dredging operations to solve harbor siltation problems.
- 28 January 2022
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 10 (2) , 182
Open AccessThe Environmental Effects of the Innovative Ejectors Plant Technology for the Eco-Friendly Sediment Management in Harbors
A sediment bypassing plant based on innovative jet pump, ejectors, has been tested in the first-of-a-kind demo application at the harbor of Cervia (Italy, Northern Adriatic Sea). The ejector is a jet pump aimed to reduce sediment accumulation in navigation channels and coastal areas. Herein we present results of the first study assessing the potential ecological effects of the ejectors plant. Sediment characteristics, benthic, and fish assemblages before and after the plant activation have been analyzed in the putatively impacted (the sediment removal and discharge) areas and four control locations, one time before and two times after plant activation. Ejectors plant operation resulted in a reduction of the mud and organic matter content in the sediment, as well as in changes in shell debris amount in the impacted areas. Abundance and species richness of benthic macroinvertebrates, initially reduced in the impacted areas, probably due to the previous repeated dredging, returned to higher values during demo plant continuous operation. Higher diversity of fish fauna was observed in the study area during plant operation period. Observed dynamics of the ecological status of the marine habitat suggest that an ejectors plant could represent an eco-friendly solution alternative to dredging operations to solve harbor siltation problems.
- Open Access
- 12 February 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (2) , 197
Effectiveness Assessment of an Innovative Ejector Plant for Port Sediment Management
The need to remove deposited material from water basins is common and has been shared by many ports and channels since the earliest settlements along coasts and rivers. Dredging, the most widely used method to remove sediment deposits, is a reliable and wide-spread technology. Nevertheless, dredging is only able to restore the desired water depth but without any kind of impact on the causes of sedimentation and so it cannot guarantee navigability over time. Moreover, dredging operations have relevant environmental and economic issues. Therefore, there is a growing market demand for alternatives to sustainable technologies to dredging able to preserve navigability. This paper aims to evaluate the effectiveness of guaranteeing a minimum water depth over time at the port entrance at Marina of Cervia (Italy), wherein the first industrial scale ejector demo plant has been installed and operated from June 2019. The demo plant was designed to continuously remove the sediment that naturally settles in a certain area through the operation of the ejectors, which are submersible jet pumps. This paper focuses on a three-year analysis of bathymetries realized at the port inlet before and after ejector demo plant installation and correlates the bathymetric data with metocean data (waves and sea water level) collected in the same period. In particular, this paper analyses the relation between sea depth and sediment volume variation at the port inlet with ejector demo plant operation regimes. Results show that in the period from January to April 2020, which was also the period of full load operation of the demo plant, the water depth in the area of influence of the ejectors increased by 0.72 mm/day, while in the whole port inlet area a decrease of 0.95 mm/day was observed. Furthermore, in the same period of operation, the ejector demo plant’s impact on volume variation was estimated in a range of 245–750 m3.
- 12 February 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (2) , 197
Open AccessEffectiveness Assessment of an Innovative Ejector Plant for Port Sediment Management
The need to remove deposited material from water basins is common and has been shared by many ports and channels since the earliest settlements along coasts and rivers. Dredging, the most widely used method to remove sediment deposits, is a reliable and wide-spread technology. Nevertheless, dredging is only able to restore the desired water depth but without any kind of impact on the causes of sedimentation and so it cannot guarantee navigability over time. Moreover, dredging operations have relevant environmental and economic issues. Therefore, there is a growing market demand for alternatives to sustainable technologies to dredging able to preserve navigability. This paper aims to evaluate the effectiveness of guaranteeing a minimum water depth over time at the port entrance at Marina of Cervia (Italy), wherein the first industrial scale ejector demo plant has been installed and operated from June 2019. The demo plant was designed to continuously remove the sediment that naturally settles in a certain area through the operation of the ejectors, which are submersible jet pumps. This paper focuses on a three-year analysis of bathymetries realized at the port inlet before and after ejector demo plant installation and correlates the bathymetric data with metocean data (waves and sea water level) collected in the same period. In particular, this paper analyses the relation between sea depth and sediment volume variation at the port inlet with ejector demo plant operation regimes. Results show that in the period from January to April 2020, which was also the period of full load operation of the demo plant, the water depth in the area of influence of the ejectors increased by 0.72 mm/day, while in the whole port inlet area a decrease of 0.95 mm/day was observed. Furthermore, in the same period of operation, the ejector demo plant’s impact on volume variation was estimated in a range of 245–750 m3.
- Open Access
A Preliminary Assessment of the Potential of Low Percentage Green Hydrogen Blending in the Italian Natural Gas Network
The growing rate of electricity generation from renewables is leading to new operational and management issues on the power grid because the electricity generated exceeds local requirements and the transportation or storage capacities are inadequate. An interesting option that is under investigation by several years is the opportunity to use the renewable electricity surplus to power electrolyzers that split water into its component parts, with the hydrogen being directly injected into natural gas pipelines for both storage and transportation. This innovative approach merges together the concepts of (i) renewable power-to-hydrogen (P2H) and of (ii) hydrogen blending into natural gas networks. The combination of renewable P2H and hydrogen blending into natural gas networks has a huge potential in terms of environmental and social benefits, but it is still facing several barriers that are technological, economic, legislative. In the framework of the new hydrogen strategy for a climate-neutral Europe, Member States should design a roadmap moving towards a hydrogen ecosystem by 2050. The blending of “green hydrogen”, that is hydrogen produced by renewable sources, in the natural gas network at a limited percentage is a key element to enable hydrogen production in a preliminary and transitional phase. Therefore, it is urgent to evaluate at the same time (i) the potential of green hydrogen blending at low percentage (up to 10%) and (ii) the maximum P2H capacity compatible with low percentage blending. The paper aims to preliminary assess the green hydrogen blending potential into the Italian natural gas network as a tool for policy makers, grid and networks managers and energy planners.
Open AccessA Preliminary Assessment of the Potential of Low Percentage Green Hydrogen Blending in the Italian Natural Gas Network
The growing rate of electricity generation from renewables is leading to new operational and management issues on the power grid because the electricity generated exceeds local requirements and the transportation or storage capacities are inadequate. An interesting option that is under investigation by several years is the opportunity to use the renewable electricity surplus to power electrolyzers that split water into its component parts, with the hydrogen being directly injected into natural gas pipelines for both storage and transportation. This innovative approach merges together the concepts of (i) renewable power-to-hydrogen (P2H) and of (ii) hydrogen blending into natural gas networks. The combination of renewable P2H and hydrogen blending into natural gas networks has a huge potential in terms of environmental and social benefits, but it is still facing several barriers that are technological, economic, legislative. In the framework of the new hydrogen strategy for a climate-neutral Europe, Member States should design a roadmap moving towards a hydrogen ecosystem by 2050. The blending of “green hydrogen”, that is hydrogen produced by renewable sources, in the natural gas network at a limited percentage is a key element to enable hydrogen production in a preliminary and transitional phase. Therefore, it is urgent to evaluate at the same time (i) the potential of green hydrogen blending at low percentage (up to 10%) and (ii) the maximum P2H capacity compatible with low percentage blending. The paper aims to preliminary assess the green hydrogen blending potential into the Italian natural gas network as a tool for policy makers, grid and networks managers and energy planners.
- Open Access
Analysis of the Existing Barriers for the Market Development of Power to Hydrogen (P2H) in Italy
New technological solutions are required to control the impact of the increasing presence of renewable energy sources connected to the electric grid that are characterized by unpredictable production (i.e., wind and solar energy). Energy storage is becoming essential to stabilize the grid when a mismatch between production and demand occurs. Among the available solutions, Power to Hydrogen (P2H) is one of the most attractive options. However, despite the potential, many barriers currently hinder P2H market development. The literature reports general barriers and strategies to overcome them, but a specific analysis is fundamental to identifying how these barriers concretely arise in national and regional frameworks, since tailored solutions are needed to foster the development of P2H local market. The paper aims to identify and to analyze the existing barriers for P2H market uptake in Italy. The paper shows how several technical, regulatory and economic issues are still unsolved, resulting in a source of uncertainty for P2H investment. The paper also suggests possible approaches and solutions to address the Italian barriers and to support politics and decision-makers in the definition and implementation of the national hydrogen strategy.
Open AccessAnalysis of the Existing Barriers for the Market Development of Power to Hydrogen (P2H) in Italy
New technological solutions are required to control the impact of the increasing presence of renewable energy sources connected to the electric grid that are characterized by unpredictable production (i.e., wind and solar energy). Energy storage is becoming essential to stabilize the grid when a mismatch between production and demand occurs. Among the available solutions, Power to Hydrogen (P2H) is one of the most attractive options. However, despite the potential, many barriers currently hinder P2H market development. The literature reports general barriers and strategies to overcome them, but a specific analysis is fundamental to identifying how these barriers concretely arise in national and regional frameworks, since tailored solutions are needed to foster the development of P2H local market. The paper aims to identify and to analyze the existing barriers for P2H market uptake in Italy. The paper shows how several technical, regulatory and economic issues are still unsolved, resulting in a source of uncertainty for P2H investment. The paper also suggests possible approaches and solutions to address the Italian barriers and to support politics and decision-makers in the definition and implementation of the national hydrogen strategy.