Paul Wassell
Research Subjects
Research Interests
Paul Wassell has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
Isti Christianti
Sinarmas Agribusiness and Food (R&D) Marunda Centre Blok D 1 No. 1, Ds. Segara Makmur, Kec. Tarumajaya, Marunda Makmur Bekasi 17211 Indonesia
4 shared publicationsGraham Bonwick
Department of Biological Sciences, University of Chester, U.K.
3 shared publications- Niall W. G. Young
Danisco A/S, Multiple Food Applications, Edwin Rahrs Vej 38, Brabrand 8220, Denmark
3 shared publications Christopher Smith
Department of Food and Tourism Management, Manchester Metropolitan University, U.K.
2 shared publicationsDewi Kristina Natalia Silalahi
2 shared publicationsDewi Yuliyanti
Sinarmas Agribusiness and Food (R&D) Marunda Centre Blok D 1 No. 1, Ds. Segara Makmur, Kec. Tarumajaya, Marunda Makmur Bekasi 17211 Indonesia
2 shared publications
Latest Publications
- 4 May 2023
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 58 (7) , 3707-3714
Micronutrient retention in high oleic palm oil: effect of refining technique
Summary: Retention of micronutrients in high oleic palm oil (HOPO) was evaluated by comparing two methods; standard refining (260 °C) and modified refining (160, 180, 200 °C). Tocopherol analysis showed that α‐tocopherol loss during standard refining was relatively low for both refined bleached and deodorised (RBD) PO control (10%) and RBDHOPO (2%). On the contrary, the carotene loss for both RBDPO control and RBDHOPO in standard refining methods was 99% (1.9 and 5.9 ppm, detected). Modified refining temperatures, can maintain up to 99% more carotenes than standard refining. Applying modified refining to RBDHOPO retains ~78%–83% more carotene than regular RBDPO. This examination shows, suitably processed RBDHOPO has the capability for producing a red palm oil (RPO), enriched with carotenoid for provitamin A function.
- 4 May 2023
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 58 (7) , 3707-3714
Micronutrient retention in high oleic palm oil: effect of refining technique
Summary: Retention of micronutrients in high oleic palm oil (HOPO) was evaluated by comparing two methods; standard refining (260 °C) and modified refining (160, 180, 200 °C). Tocopherol analysis showed that α‐tocopherol loss during standard refining was relatively low for both refined bleached and deodorised (RBD) PO control (10%) and RBDHOPO (2%). On the contrary, the carotene loss for both RBDPO control and RBDHOPO in standard refining methods was 99% (1.9 and 5.9 ppm, detected). Modified refining temperatures, can maintain up to 99% more carotenes than standard refining. Applying modified refining to RBDHOPO retains ~78%–83% more carotene than regular RBDPO. This examination shows, suitably processed RBDHOPO has the capability for producing a red palm oil (RPO), enriched with carotenoid for provitamin A function.
- 19 October 2022
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 57 (12) , 7731-7739
Triacylglycerol characterisation of Moringa oleifera seed oil by LC‐Q‐TOF and ESI
Summary: Currently, in the analysis of triacylglycerol (TAG) composition of the Moringa oleifera seed oil (MOSO), there are still approximately 13.9% of TAG still unknown. Reverse‐phase high‐performance liquid chromatography (HPLC) coupled to a refractive index detector (RID) has previously been applied for the identification of TAG in MOSO. A new approach focuses on the properties of the fatty acid assay and the full characterisation of TAGs. Identification and determination of TAG compositions in MOSO were done by LC‐Q‐TOF (LCMS‐9030) with ESI interface and HCOONH4 (ammonium formate) additive in the mobile aqueous phase. Triolein (OOO) was 39.3% and is the dominant TAG in MOSO. This new method was able to fully characterise a total of 33 TAG compositions using accurate mass MS data and MS/MS spectra.
- 19 October 2022
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 57 (12) , 7731-7739
Triacylglycerol characterisation of Moringa oleifera seed oil by LC‐Q‐TOF and ESI
Summary: Currently, in the analysis of triacylglycerol (TAG) composition of the Moringa oleifera seed oil (MOSO), there are still approximately 13.9% of TAG still unknown. Reverse‐phase high‐performance liquid chromatography (HPLC) coupled to a refractive index detector (RID) has previously been applied for the identification of TAG in MOSO. A new approach focuses on the properties of the fatty acid assay and the full characterisation of TAGs. Identification and determination of TAG compositions in MOSO were done by LC‐Q‐TOF (LCMS‐9030) with ESI interface and HCOONH4 (ammonium formate) additive in the mobile aqueous phase. Triolein (OOO) was 39.3% and is the dominant TAG in MOSO. This new method was able to fully characterise a total of 33 TAG compositions using accurate mass MS data and MS/MS spectra.
- 20 February 2021
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 56 (8) , 3903-3913
Polar compounds: a quantitative indicator for life cycle assessment during protracted semi‐continuous deep fat frying simulation
Summary: Total Polar Compound (TPC) analysis was used to evaluate fry life cycle of oils and shortenings with differing fatty acids compositions, and to understand if longer trisaturated material (Tribehenin), could influence total fry life, during protracted, semi‐continuous deep frying simulations. Results showed, when TPC reached 25% max, the TOTOX and FFA revealed correlated values. However, both FFA and Totox were deemed unreliable indicators of oil quality. TPCs were more acutely accurate, especially during oil filtration and top‐up procedures, where peak TPC onset showed stronger correlation for assessing oil degradation. Unsaturated frying oil, SBO (PUFA based), resulted with the shortest fry life of 132 fry‐cycles; POL (MUFA based) 138 fry‐cycles and MPS (MUFA based + Tribehenin) achieving up to 146 fry‐cycles, suggesting Tribehenin may apparently extend fry life longevity.
- 20 February 2021
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 56 (8) , 3903-3913
Polar compounds: a quantitative indicator for life cycle assessment during protracted semi‐continuous deep fat frying simulation
Summary: Total Polar Compound (TPC) analysis was used to evaluate fry life cycle of oils and shortenings with differing fatty acids compositions, and to understand if longer trisaturated material (Tribehenin), could influence total fry life, during protracted, semi‐continuous deep frying simulations. Results showed, when TPC reached 25% max, the TOTOX and FFA revealed correlated values. However, both FFA and Totox were deemed unreliable indicators of oil quality. TPCs were more acutely accurate, especially during oil filtration and top‐up procedures, where peak TPC onset showed stronger correlation for assessing oil degradation. Unsaturated frying oil, SBO (PUFA based), resulted with the shortest fry life of 132 fry‐cycles; POL (MUFA based) 138 fry‐cycles and MPS (MUFA based + Tribehenin) achieving up to 146 fry‐cycles, suggesting Tribehenin may apparently extend fry life longevity.
- Open Access
- 20 December 2018
- Published by Lembaga Penelitian dan Pengabdian Masyarakat Universitas Jambi in Indonesian Food Science and Technology Journal
- Vol. 2 (1) , 21-25
The Environmental effects on fortified palm olein in the Anthropocene
Until now, no literature exists to explain about the impact of time, and environmental parameters, when using typical commercial grade transparent linear low density polyethylene (LLDPE) packaging for protecting vegetable cooking oil during typical shelf-life conditions. We tested long-term impact of temperature and illuminance (light: 100 to 150 lux and darkness <1 lux) on refined bleached deodorized palm olein (RBDPOL), fortified with vitamin A. Results showed degradation of fortified RBDPOL with 70 ppm vitamin A was approximately 15% at 18-22oC in Light, 10% at 18-22oC in Darkness, 19% at 32-33oC in light and 17% 32-33oC in darkness. Similar trend was observed at 45 ppm vitamin A. Exposure to heat and light impacted vitamin A degradation, but is primarily attributed to temperature, irrespective of packaging. This investigation builds on our previous work (Silalahi et al., 2017), and confirms the impact of challenging environmental conditions on vegetable cooking oil shelf-life over long time periods.
- 20 December 2018
- Published by Lembaga Penelitian dan Pengabdian Masyarakat Universitas Jambi in Indonesian Food Science and Technology Journal
- Vol. 2 (1) , 21-25
Open AccessThe Environmental effects on fortified palm olein in the Anthropocene
Until now, no literature exists to explain about the impact of time, and environmental parameters, when using typical commercial grade transparent linear low density polyethylene (LLDPE) packaging for protecting vegetable cooking oil during typical shelf-life conditions. We tested long-term impact of temperature and illuminance (light: 100 to 150 lux and darkness <1 lux) on refined bleached deodorized palm olein (RBDPOL), fortified with vitamin A. Results showed degradation of fortified RBDPOL with 70 ppm vitamin A was approximately 15% at 18-22oC in Light, 10% at 18-22oC in Darkness, 19% at 32-33oC in light and 17% 32-33oC in darkness. Similar trend was observed at 45 ppm vitamin A. Exposure to heat and light impacted vitamin A degradation, but is primarily attributed to temperature, irrespective of packaging. This investigation builds on our previous work (Silalahi et al., 2017), and confirms the impact of challenging environmental conditions on vegetable cooking oil shelf-life over long time periods.
- 9 May 2017
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 52 (8) , 1869-1877
The stability of vitamin A in fortified palm olein during extended storage and thermal treatment
Summary: The stability of vitamin A in Refined Bleached Deodorised Palm Olein (RBDPOL) was studied for 24 months. Vitamin A decreased with time, temperature and thermal treatment (frying/cooking). RBDPOL fortification was observed over several temperature ranges, using PET, nylon and HDPE commercial packaging materials. After 24 months, the following vitamin A contents of 39–43 IU g−1 (39–45%) at 16–20 °C; 35–40 IU g−1 (43–49%) at 24–29 °C; and 28–39 IU g−1 (45–73%) at 24–45 °C were detected at the respective temperature ranges. Results showed stability of vitamin A fortified RBDPOL vegetable oil was not stable over typical shelf life (12 months). Depletion of vitamin A accelerated when the RBDPOL vegetable oil was subjected to high temperature thermal treatment.
- 9 May 2017
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 52 (8) , 1869-1877
The stability of vitamin A in fortified palm olein during extended storage and thermal treatment
Summary: The stability of vitamin A in Refined Bleached Deodorised Palm Olein (RBDPOL) was studied for 24 months. Vitamin A decreased with time, temperature and thermal treatment (frying/cooking). RBDPOL fortification was observed over several temperature ranges, using PET, nylon and HDPE commercial packaging materials. After 24 months, the following vitamin A contents of 39–43 IU g−1 (39–45%) at 16–20 °C; 35–40 IU g−1 (43–49%) at 24–29 °C; and 28–39 IU g−1 (45–73%) at 24–45 °C were detected at the respective temperature ranges. Results showed stability of vitamin A fortified RBDPOL vegetable oil was not stable over typical shelf life (12 months). Depletion of vitamin A accelerated when the RBDPOL vegetable oil was subjected to high temperature thermal treatment.
- 26 March 2012
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 28 (13) , 5539-5547
Synchrotron Radiation Macrobeam and Microbeam X-ray Diffraction Studies of Interfacial Crystallization of Fats in Water-in-Oil Emulsions
Using macrobeam and microbeam techniques, we performed synchrotron radiation X-ray diffraction (SR-XRD) analyses of fat crystallization in water-in-oil (W/O) emulsion, in combination with DSC and polarized optical microscopic observation. Particular focus was on the crystallization of the fats around water droplets in the W/O emulsion systems using food emulsifiers of polyglycerol polyricinoleate (PGPR) alone (PGPR emulsion), and PGPR and monobehenoylglycerol (MB) (PGPR+MB emulsion). We obtained the following results: (1) macrobeam SR-XRD confirmed that adding MB promoted fat crystallization during cooling, (2) microbeam SR-XRD indicated that the lamellar planes of fat crystals near the water and oil interfaces are arranged almost parallel to the interface planes in both PGPR emulsion and PGPR+MB emulsion, and (3) adding MB resulted in the formation of tiny fat crystals because it promoted crystallization, which occurred both in the bulk oil phase and at the W/O interfaces. The present study is the first to apply microbeam SR-XRD to observe the microscopic features of fat crystallization in W/O emulsion, following fat crystallization in the oil droplets in the oil-in-water (O/W) emulsion (Arima, S.; Ueno, S.; Ogawa, A.; Sato, K. Langmuir2009, 25, 9777–9784).
- 26 March 2012
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 28 (13) , 5539-5547
Synchrotron Radiation Macrobeam and Microbeam X-ray Diffraction Studies of Interfacial Crystallization of Fats in Water-in-Oil Emulsions
Using macrobeam and microbeam techniques, we performed synchrotron radiation X-ray diffraction (SR-XRD) analyses of fat crystallization in water-in-oil (W/O) emulsion, in combination with DSC and polarized optical microscopic observation. Particular focus was on the crystallization of the fats around water droplets in the W/O emulsion systems using food emulsifiers of polyglycerol polyricinoleate (PGPR) alone (PGPR emulsion), and PGPR and monobehenoylglycerol (MB) (PGPR+MB emulsion). We obtained the following results: (1) macrobeam SR-XRD confirmed that adding MB promoted fat crystallization during cooling, (2) microbeam SR-XRD indicated that the lamellar planes of fat crystals near the water and oil interfaces are arranged almost parallel to the interface planes in both PGPR emulsion and PGPR+MB emulsion, and (3) adding MB resulted in the formation of tiny fat crystals because it promoted crystallization, which occurred both in the bulk oil phase and at the W/O interfaces. The present study is the first to apply microbeam SR-XRD to observe the microscopic features of fat crystallization in W/O emulsion, following fat crystallization in the oil droplets in the oil-in-water (O/W) emulsion (Arima, S.; Ueno, S.; Ogawa, A.; Sato, K. Langmuir2009, 25, 9777–9784).
- 12 April 2010
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 45 (5) , 877-883
Ultrasound Doppler based in‐line viscosity and solid fat profile measurement of fat blends
Summary: This study reports the use of upgraded ultrasonic velocity profiling with pressure difference methodology; extended from previous work demonstrating true in‐line rheological and solid fat content (SFC) characterisation of complex opaque fat blends, subjected to scaled dynamic processing conditions. The experimental results have successfully confirmed previous non‐invasive, in‐line measurements for instantaneous velocity and rheological profiling of complex opaque fat blends [International Journal of Food Science and Technology43 (2008) 2083]. A method for in‐line measurements under dynamic processing conditions to obtain the SFC of a fat blend was developed and successfully tested for a 30% palm stearin and 70% rapeseed oil system over a temperature range of 10–40 °C. These measurements correlated well with standard SFC values from pulsed‐nuclear magnetic resonance (p‐NMR) measurements deviating not more than +/– 2% SFC points from the standard p‐NMR values.
- 12 April 2010
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 45 (5) , 877-883
Ultrasound Doppler based in‐line viscosity and solid fat profile measurement of fat blends
Summary: This study reports the use of upgraded ultrasonic velocity profiling with pressure difference methodology; extended from previous work demonstrating true in‐line rheological and solid fat content (SFC) characterisation of complex opaque fat blends, subjected to scaled dynamic processing conditions. The experimental results have successfully confirmed previous non‐invasive, in‐line measurements for instantaneous velocity and rheological profiling of complex opaque fat blends [International Journal of Food Science and Technology43 (2008) 2083]. A method for in‐line measurements under dynamic processing conditions to obtain the SFC of a fat blend was developed and successfully tested for a 30% palm stearin and 70% rapeseed oil system over a temperature range of 10–40 °C. These measurements correlated well with standard SFC values from pulsed‐nuclear magnetic resonance (p‐NMR) measurements deviating not more than +/– 2% SFC points from the standard p‐NMR values.
- 23 March 2010
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 45 (4) , 642-655
Towards a multidisciplinary approach to structuring in reduced saturated fat‐based systems – a review
Summary: Although many food products are essentially emulsions, interest in the structuring of oil‐continuous emulsions (and in specific cases water‐continuous emulsions) is intense, particularly to meet the continuing challenge of reducing the degree of saturates in food systems. Consequently, it is necessary to observe the effects of structurants and to examine their impacts on current food systems. This is especially the case where novel structuring materials are used to wholly or partially replace traditional structurants. A multidisciplinary approach is discussed encompassing traditional and novel mechanisms considered able to structure within low saturated fat‐based systems and which in themselves could also have emulsification properties. The presence of interfacial compositions as in emulsions requires a crucial understanding of the interactions within these compositions for the creation of building blocks in oil or fat structuring. Where a co‐surfactant structure may be used, together with novel structurants, for example, wax esters, phytosterols, it is necessary to understand how these may influence interfacial film thickness, strength and flexibility. Understanding how to measure mechanical visco‐elastic properties of structurant interactions both in model and real time dynamic measurements will be necessary to account for diffusion, orientation and self‐assembly mechanisms. This review discusses combining traditional techniques with novel structurant technology; developing and validating dynamic measurement techniques; and investigation of real systems as opposed to purely model systems.
- 23 March 2010
- Published by Oxford University Press (OUP) in International Journal of Food Science and Technology
- Vol. 45 (4) , 642-655
Towards a multidisciplinary approach to structuring in reduced saturated fat‐based systems – a review
Summary: Although many food products are essentially emulsions, interest in the structuring of oil‐continuous emulsions (and in specific cases water‐continuous emulsions) is intense, particularly to meet the continuing challenge of reducing the degree of saturates in food systems. Consequently, it is necessary to observe the effects of structurants and to examine their impacts on current food systems. This is especially the case where novel structuring materials are used to wholly or partially replace traditional structurants. A multidisciplinary approach is discussed encompassing traditional and novel mechanisms considered able to structure within low saturated fat‐based systems and which in themselves could also have emulsification properties. The presence of interfacial compositions as in emulsions requires a crucial understanding of the interactions within these compositions for the creation of building blocks in oil or fat structuring. Where a co‐surfactant structure may be used, together with novel structurants, for example, wax esters, phytosterols, it is necessary to understand how these may influence interfacial film thickness, strength and flexibility. Understanding how to measure mechanical visco‐elastic properties of structurant interactions both in model and real time dynamic measurements will be necessary to account for diffusion, orientation and self‐assembly mechanisms. This review discusses combining traditional techniques with novel structurant technology; developing and validating dynamic measurement techniques; and investigation of real systems as opposed to purely model systems.