Ying-Lung Steve Tse
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ying-Lung Steve Tse has a total of 84 co-authors. Here are the top co-authors by number of shared publications:
- Ying-Yeung Yeung
Department of Chemistry and State Key Laboratory of Synthetic Chemistry The Chinese University of Hong Kong Shatin, NT Hong Kong China
10 shared publications - Xinyan Wang
Atombeat Technology Pte. Ltd. , 6 Rafflesr Quay
7 shared publications - Chung Chi Chio
The Chinese University of Hong Kong Sha Tin
5 shared publications - Chi Yuen Pak
Department of Chemistry, The Chinese University of Hong Kong, Shatin, New Territories, Hong Kong SAR, China
4 shared publications Haihui Wang
Department of Chemistry
4 shared publications- To Ngai
The Chinese University of Hong Kong
4 shared publications
Latest Publications
- Open Access
- 19 August 2026
- Published by American Chemical Society (ACS) in ACS Physical Chemistry Au
- Vol. 6 (5) , 1252-1263
Accelerated OH Oxidation of Methyl Chloride via Surface Accumulation at the Air–Water Interface
Chemical reactions often proceed differently at the air–water interface than in bulk solution. In particular, “on-water” catalysis refers to cases where reactions appear to be accelerated at aqueous surfaces. A growing body of work shows that rate acceleration can arise from intertwined effects, including modified solvation and acid–base behavior, as well as enhanced reactant concentrations. Despite this progress, it remains difficult to quantify, for specific atmospheric reactions, how much interfacial rate enhancement arises from (i) intrinsic changes in the free energy barrier versus (ii) concentration-driven effects, because fully converged interfacial free energy profiles are costly to obtain with ab initio molecular simulations. Here, we address this challenge for the reaction of methyl chloride CH3Cl with hydroxyl radicals (OH), an important atmospheric sink of CH3Cl, by developing a reaction-specific empirical valence bond (EVB) model parametrized against high-level ab initio data. The EVB model, combined with a flexible polarizable water force field, enables efficient condensed-phase simulations and systematic comparison of gas phase, bulk aqueous, and interfacial reactivity. Our results show that the reaction free energy barrier is only weakly affected by proximity to the air–water interface, whereas thermodynamic enrichment of the surface-active reactants increases the effective interfacial rate by more than 2 orders of magnitude relative to the aqueous bulk and by over 6 orders of magnitude relative to the gas phase.
- 19 August 2026
- Published by American Chemical Society (ACS) in ACS Physical Chemistry Au
- Vol. 6 (5) , 1252-1263
Open AccessAccelerated OH Oxidation of Methyl Chloride via Surface Accumulation at the Air–Water Interface
Chemical reactions often proceed differently at the air–water interface than in bulk solution. In particular, “on-water” catalysis refers to cases where reactions appear to be accelerated at aqueous surfaces. A growing body of work shows that rate acceleration can arise from intertwined effects, including modified solvation and acid–base behavior, as well as enhanced reactant concentrations. Despite this progress, it remains difficult to quantify, for specific atmospheric reactions, how much interfacial rate enhancement arises from (i) intrinsic changes in the free energy barrier versus (ii) concentration-driven effects, because fully converged interfacial free energy profiles are costly to obtain with ab initio molecular simulations. Here, we address this challenge for the reaction of methyl chloride CH3Cl with hydroxyl radicals (OH), an important atmospheric sink of CH3Cl, by developing a reaction-specific empirical valence bond (EVB) model parametrized against high-level ab initio data. The EVB model, combined with a flexible polarizable water force field, enables efficient condensed-phase simulations and systematic comparison of gas phase, bulk aqueous, and interfacial reactivity. Our results show that the reaction free energy barrier is only weakly affected by proximity to the air–water interface, whereas thermodynamic enrichment of the surface-active reactants increases the effective interfacial rate by more than 2 orders of magnitude relative to the aqueous bulk and by over 6 orders of magnitude relative to the gas phase.
- Open Access
- 24 June 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (35) , 37663-37676
Elucidating Formation Mechanisms of Inorganic Sulfates upon OH Radical Oxidation of Organosulfates via Non-Sulfur Radical Pathways: Insights from Methyl Sulfate
Organosulfates are major reservoirs of sulfur in atmospheric aerosols, yet the molecular steps by which hydroxyl radicals (OH) convert organosulfates into inorganic sulfate in aqueous particles remain poorly constrained. This uncertainty limits the mechanistic interpretation of organosulfate chemical aging and its representation in atmospheric models. Here, we use methyl sulfate, CH3OSO3–, the simplest organosulfate, as a model system to elucidate OH-initiated aqueous oxidation chemistry through integrated quantum-chemical calculations, in situ electron paramagnetic resonance spin trapping, and high-resolution mass spectrometry. Calculations show that OH oxidation is initiated predominantly by methyl H-abstraction rather than direct attack at the sulfate ester, producing a carbon-centered radical that rapidly adds O2 to form a peroxy radical. Subsequent peroxy–peroxy chemistry forms a tetroxide intermediate whose decomposition favors stepwise O–O bond scission to alkoxy sulfate radicals, while classical Russell and Bennett–Summers pathways are kinetically inaccessible. The key sulfate-forming step is a water-assisted, proton-coupled C–O bond cleavage of the alkoxy sulfate radical. Extended hydrogen-bond networks markedly lower the barrier for this fragmentation, enabling direct formation of bisulfate/sulfate and a formyl radical without requiring sulfite or sulfate radical anions as obligatory intermediates. Experimentally, mass spectrometry detects a BMPO-trapped methyl sulfate radical and an adduct consistent with formyl-radical formation, whereas sulfur-centered radical adducts are minor under our conditions. These combined results reveal a non-sulfur radical pathway for inorganic sulfate formation from organosulfates and highlight the central role of explicit solvation and proton transfer in aqueous aerosol sulfur chemistry.
- 24 June 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (35) , 37663-37676
Open AccessElucidating Formation Mechanisms of Inorganic Sulfates upon OH Radical Oxidation of Organosulfates via Non-Sulfur Radical Pathways: Insights from Methyl Sulfate
Organosulfates are major reservoirs of sulfur in atmospheric aerosols, yet the molecular steps by which hydroxyl radicals (OH) convert organosulfates into inorganic sulfate in aqueous particles remain poorly constrained. This uncertainty limits the mechanistic interpretation of organosulfate chemical aging and its representation in atmospheric models. Here, we use methyl sulfate, CH3OSO3–, the simplest organosulfate, as a model system to elucidate OH-initiated aqueous oxidation chemistry through integrated quantum-chemical calculations, in situ electron paramagnetic resonance spin trapping, and high-resolution mass spectrometry. Calculations show that OH oxidation is initiated predominantly by methyl H-abstraction rather than direct attack at the sulfate ester, producing a carbon-centered radical that rapidly adds O2 to form a peroxy radical. Subsequent peroxy–peroxy chemistry forms a tetroxide intermediate whose decomposition favors stepwise O–O bond scission to alkoxy sulfate radicals, while classical Russell and Bennett–Summers pathways are kinetically inaccessible. The key sulfate-forming step is a water-assisted, proton-coupled C–O bond cleavage of the alkoxy sulfate radical. Extended hydrogen-bond networks markedly lower the barrier for this fragmentation, enabling direct formation of bisulfate/sulfate and a formyl radical without requiring sulfite or sulfate radical anions as obligatory intermediates. Experimentally, mass spectrometry detects a BMPO-trapped methyl sulfate radical and an adduct consistent with formyl-radical formation, whereas sulfur-centered radical adducts are minor under our conditions. These combined results reveal a non-sulfur radical pathway for inorganic sulfate formation from organosulfates and highlight the central role of explicit solvation and proton transfer in aqueous aerosol sulfur chemistry.
- Open Access
- 2 January 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (7)
Halide Bond Assisted Double Desymmetrization of Meso ‐Dicarboxylic Acids with Symmetrical Olefins via Asymmetric Halogenation
The efficient synthesis of complex chiral molecules from achiral precursors is essential for sustainable pharmaceutical development. Among available strategies, the desymmetrization of meso compounds provides a powerful route to construct multiple stereocenters in a single step. Although meso ‐dicarboxylic acids are promising feedstocks, their catalytic asymmetric desymmetrization remains a significant challenge. Herein we report a catalytic asymmetric halolactonization of meso ‐dicarboxylic acids with electronically unbiased olefins, achieving simultaneous desymmetrization of both the meso ‐dicarboxylic acid and haliranium intermediate. This method efficiently constructs chiral caged polycyclic lactones bearing six stereocenters in a single operation. Furthermore, the reaction is extended to exocyclic olefins, granting access to valuable terpenoid scaffolds. Its synthetic utility is highlighted by the enantioselective formal synthesis of (–)‐longifolene, establishing a versatile platform for accessing norbornane‐based natural products. Mechanistic studies reveal that the brominated amino‐urea catalyst operates as a biomimetic hydrogen‐bonding activator. Unexpectedly, the bromine substituent on the catalysts functions as an unconventional Brønsted base to stabilize a key intermediate via halide bond instead of a typical halogen bond. This work marks a substantial advancement in terpenoid synthesis, merging operational simplicity with the efficient generation of multiple stereocenters in a single transformation.
- 2 January 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (7)
Open AccessHalide Bond Assisted Double Desymmetrization of Meso ‐Dicarboxylic Acids with Symmetrical Olefins via Asymmetric Halogenation
The efficient synthesis of complex chiral molecules from achiral precursors is essential for sustainable pharmaceutical development. Among available strategies, the desymmetrization of meso compounds provides a powerful route to construct multiple stereocenters in a single step. Although meso ‐dicarboxylic acids are promising feedstocks, their catalytic asymmetric desymmetrization remains a significant challenge. Herein we report a catalytic asymmetric halolactonization of meso ‐dicarboxylic acids with electronically unbiased olefins, achieving simultaneous desymmetrization of both the meso ‐dicarboxylic acid and haliranium intermediate. This method efficiently constructs chiral caged polycyclic lactones bearing six stereocenters in a single operation. Furthermore, the reaction is extended to exocyclic olefins, granting access to valuable terpenoid scaffolds. Its synthetic utility is highlighted by the enantioselective formal synthesis of (–)‐longifolene, establishing a versatile platform for accessing norbornane‐based natural products. Mechanistic studies reveal that the brominated amino‐urea catalyst operates as a biomimetic hydrogen‐bonding activator. Unexpectedly, the bromine substituent on the catalysts functions as an unconventional Brønsted base to stabilize a key intermediate via halide bond instead of a typical halogen bond. This work marks a substantial advancement in terpenoid synthesis, merging operational simplicity with the efficient generation of multiple stereocenters in a single transformation.
- Open Access
- 2 January 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (7) , e20866
Halide Bond Assisted Double Desymmetrization of Meso ‐Dicarboxylic Acids with Symmetrical Olefins via Asymmetric Halogenation
The efficient synthesis of complex chiral molecules from achiral precursors is essential for sustainable pharmaceutical development. Among available strategies, the desymmetrization of meso compounds provides a powerful route to construct multiple stereocenters in a single step. Although meso ‐dicarboxylic acids are promising feedstocks, their catalytic asymmetric desymmetrization remains a significant challenge. Herein we report a catalytic asymmetric halolactonization of meso ‐dicarboxylic acids with electronically unbiased olefins, achieving simultaneous desymmetrization of both the meso ‐dicarboxylic acid and haliranium intermediate. This method efficiently constructs chiral caged polycyclic lactones bearing six stereocenters in a single operation. Furthermore, the reaction is extended to exocyclic olefins, granting access to valuable terpenoid scaffolds. Its synthetic utility is highlighted by the enantioselective formal synthesis of (–)‐longifolene, establishing a versatile platform for accessing norbornane‐based natural products. Mechanistic studies reveal that the brominated amino‐urea catalyst operates as a biomimetic hydrogen‐bonding activator. Unexpectedly, the bromine substituent on the catalysts functions as an unconventional Brønsted base to stabilize a key intermediate via halide bond instead of a typical halogen bond. This work marks a substantial advancement in terpenoid synthesis, merging operational simplicity with the efficient generation of multiple stereocenters in a single transformation.
- 2 January 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (7) , e20866
Open AccessHalide Bond Assisted Double Desymmetrization of Meso ‐Dicarboxylic Acids with Symmetrical Olefins via Asymmetric Halogenation
The efficient synthesis of complex chiral molecules from achiral precursors is essential for sustainable pharmaceutical development. Among available strategies, the desymmetrization of meso compounds provides a powerful route to construct multiple stereocenters in a single step. Although meso ‐dicarboxylic acids are promising feedstocks, their catalytic asymmetric desymmetrization remains a significant challenge. Herein we report a catalytic asymmetric halolactonization of meso ‐dicarboxylic acids with electronically unbiased olefins, achieving simultaneous desymmetrization of both the meso ‐dicarboxylic acid and haliranium intermediate. This method efficiently constructs chiral caged polycyclic lactones bearing six stereocenters in a single operation. Furthermore, the reaction is extended to exocyclic olefins, granting access to valuable terpenoid scaffolds. Its synthetic utility is highlighted by the enantioselective formal synthesis of (–)‐longifolene, establishing a versatile platform for accessing norbornane‐based natural products. Mechanistic studies reveal that the brominated amino‐urea catalyst operates as a biomimetic hydrogen‐bonding activator. Unexpectedly, the bromine substituent on the catalysts functions as an unconventional Brønsted base to stabilize a key intermediate via halide bond instead of a typical halogen bond. This work marks a substantial advancement in terpenoid synthesis, merging operational simplicity with the efficient generation of multiple stereocenters in a single transformation.
- Open Access
- 10 August 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (39) , e202511770
Unveiling an Alternative Mechanism for Lewis Basic Selenium as a C─H Hydrogen Bond Catalyst and Its Application in the Halogenation of Arenes
Electrophilic halogenation is a fundamentally useful transformation, and Lewis basic selenium catalysts together with N ‐haloimides are known to promote the reaction under mild conditions. Selenourea is a frequently used platform for the Lewis base catalyst design. In literature, it is generally believed that the Lewis basic selenium can form a Lewis adduct with the halogen as the active halogenating species. Herein, we report our recent finding that unveils an alternative mechanism of this type of reaction. It was found that the Lewis basic selenourea is first oxidized by the halogen source to give a benchtop stable and non‐hygroscopic imidazolium hypervalent selenium dibromide compound that acts as the actual catalyst. The negative charge in the hypervalent selenium compound is stabilized by the electronegative bromide, leading to the site‐isolated and unoccupied imidazolium cationic moiety. Mechanistic studies suggest that the electropositive C–Hs of the imidazolium cation can act as a strong hydrogen bond donor to activate the N ‐haloimide reagent for efficient halogenation reaction, including late‐stage halogenation of drug molecules, with low catalyst loading. Further study revealed that hypervalent imidazolium selenium dibromide can generally be applied to other mechanistically unrelated hydrogen bond‐catalyzed reactions.
- 10 August 2025
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 64 (39) , e202511770
Open AccessUnveiling an Alternative Mechanism for Lewis Basic Selenium as a C─H Hydrogen Bond Catalyst and Its Application in the Halogenation of Arenes
Electrophilic halogenation is a fundamentally useful transformation, and Lewis basic selenium catalysts together with N ‐haloimides are known to promote the reaction under mild conditions. Selenourea is a frequently used platform for the Lewis base catalyst design. In literature, it is generally believed that the Lewis basic selenium can form a Lewis adduct with the halogen as the active halogenating species. Herein, we report our recent finding that unveils an alternative mechanism of this type of reaction. It was found that the Lewis basic selenourea is first oxidized by the halogen source to give a benchtop stable and non‐hygroscopic imidazolium hypervalent selenium dibromide compound that acts as the actual catalyst. The negative charge in the hypervalent selenium compound is stabilized by the electronegative bromide, leading to the site‐isolated and unoccupied imidazolium cationic moiety. Mechanistic studies suggest that the electropositive C–Hs of the imidazolium cation can act as a strong hydrogen bond donor to activate the N ‐haloimide reagent for efficient halogenation reaction, including late‐stage halogenation of drug molecules, with low catalyst loading. Further study revealed that hypervalent imidazolium selenium dibromide can generally be applied to other mechanistically unrelated hydrogen bond‐catalyzed reactions.
- Open Access
- 16 July 2025
- Published by Wiley in WIREs Computational Molecular Science
- Vol. 15 (4)
Molecular Simulations of Fluid Interfaces
Fluid interfaces are fundamental to numerous natural and industrial processes, making their study crucial for both academic and practical purposes. Molecular dynamics (MD) simulations have become an indispensable tool for investigating the structures and molecular‐level phenomena occurring at these interfaces. This review explores various computational strategies employed to model fluid interfaces, including classical force fields, quantum mechanical (QM) methods, and neural network potentials. The review begins by discussing the choice of potential energy functions, followed by a discussion of boundary conditions and their importance in simulating systems like the air‐water and water–oil interfaces. The review then shifts to comparing nonpolarizable and polarizable force fields, highlighting when electronic polarization becomes necessary for accurately modeling the interface systems. The use of ab initio molecular dynamics (AIMD) is also examined, particularly for its ability to capture electronic effects, albeit with significant computational costs. Finally, we explore the growing role of machine learning, particularly neural network potentials, in simulating complex interface systems. By reviewing key studies on air‐water and water–oil interfaces, we summarize the latest advancements in modeling fluid interfaces, with particular attention to chemical reactions near these interfaces. This review provides a concise and approachable overview of the computational approaches that are advancing our understanding of fluid interfaces at the molecular scale.This article is categorized under: Molecular and Statistical Mechanics > Molecular Dynamics and Monte‐Carlo Methods Software > Molecular Modeling Theoretical and Physical Chemistry > Statistical Mechanics
- 16 July 2025
- Published by Wiley in WIREs Computational Molecular Science
- Vol. 15 (4)
Open AccessMolecular Simulations of Fluid Interfaces
Fluid interfaces are fundamental to numerous natural and industrial processes, making their study crucial for both academic and practical purposes. Molecular dynamics (MD) simulations have become an indispensable tool for investigating the structures and molecular‐level phenomena occurring at these interfaces. This review explores various computational strategies employed to model fluid interfaces, including classical force fields, quantum mechanical (QM) methods, and neural network potentials. The review begins by discussing the choice of potential energy functions, followed by a discussion of boundary conditions and their importance in simulating systems like the air‐water and water–oil interfaces. The review then shifts to comparing nonpolarizable and polarizable force fields, highlighting when electronic polarization becomes necessary for accurately modeling the interface systems. The use of ab initio molecular dynamics (AIMD) is also examined, particularly for its ability to capture electronic effects, albeit with significant computational costs. Finally, we explore the growing role of machine learning, particularly neural network potentials, in simulating complex interface systems. By reviewing key studies on air‐water and water–oil interfaces, we summarize the latest advancements in modeling fluid interfaces, with particular attention to chemical reactions near these interfaces. This review provides a concise and approachable overview of the computational approaches that are advancing our understanding of fluid interfaces at the molecular scale.This article is categorized under: Molecular and Statistical Mechanics > Molecular Dynamics and Monte‐Carlo Methods Software > Molecular Modeling Theoretical and Physical Chemistry > Statistical Mechanics
- 16 October 2024
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 679 (Pt B) , 284-293
Assembly and jamming of polar additive-swollen microgels at liquid–liquid interfaces: From inverse Pickering emulsions to functional materials
- 16 October 2024
- Published by Elsevier in Journal of Colloid and Interface Science
- Vol. 679 (Pt B) , 284-293
Assembly and jamming of polar additive-swollen microgels at liquid–liquid interfaces: From inverse Pickering emulsions to functional materials
- 14 February 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 128 (8) , 1987-1999
Reparameterization of Polarizable Force Fields for Studying Ion Transfer across Liquid–Liquid Interfaces
We have developed a general scheme for refining classical polarizable molecular dynamics (MD) force fields that can accurately describe the molecular interactions in systems with liquid-liquid interfaces. While ab initio MD (AIMD) simulations can naturally describe molecular interactions, they are often so computationally expensive that simulating large system sizes and/or long time scales is usually infeasible. To resolve this, we parameterized efficient and accurate classical polarizable force fields that use AIMD reference data by minimizing both the relative entropy and the root mean squared deviation in atomic forces. We utilized our new multiscale models to study chloride ion transfer across the water-dichloromethane (DCM) interface with and without the tetraethylammonium cation as the phase-transfer catalyst. Our calculated free-energy barrier for the water-DCM interface is consistent with the other reported simulation results. We further analyzed the ion-transfer process by studying the hydration shell structures around the chloride ion and the ion-pair formation to better understand the mechanism. We observed that electronic polarizability is an important factor for the studied phase-transfer catalyst to lower the free-energy barrier of the ion transfer. Using the water-benzene interface system as an additional example, we show that our parameterization scheme provides a general route for modeling different liquid-liquid interface systems even when the experimental data or force field parameters are not readily available.
- 14 February 2024
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 128 (8) , 1987-1999
Reparameterization of Polarizable Force Fields for Studying Ion Transfer across Liquid–Liquid Interfaces
We have developed a general scheme for refining classical polarizable molecular dynamics (MD) force fields that can accurately describe the molecular interactions in systems with liquid-liquid interfaces. While ab initio MD (AIMD) simulations can naturally describe molecular interactions, they are often so computationally expensive that simulating large system sizes and/or long time scales is usually infeasible. To resolve this, we parameterized efficient and accurate classical polarizable force fields that use AIMD reference data by minimizing both the relative entropy and the root mean squared deviation in atomic forces. We utilized our new multiscale models to study chloride ion transfer across the water-dichloromethane (DCM) interface with and without the tetraethylammonium cation as the phase-transfer catalyst. Our calculated free-energy barrier for the water-DCM interface is consistent with the other reported simulation results. We further analyzed the ion-transfer process by studying the hydration shell structures around the chloride ion and the ion-pair formation to better understand the mechanism. We observed that electronic polarizability is an important factor for the studied phase-transfer catalyst to lower the free-energy barrier of the ion transfer. Using the water-benzene interface system as an additional example, we show that our parameterization scheme provides a general route for modeling different liquid-liquid interface systems even when the experimental data or force field parameters are not readily available.
- Open Access
- 13 February 2024
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 14 (5) , 3018-3027
Design and Applications of Cyclopropenium Chalcogen Dihalides in Catalysis via C(sp3)–H···X Interactions
- 13 February 2024
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 14 (5) , 3018-3027
Open AccessDesign and Applications of Cyclopropenium Chalcogen Dihalides in Catalysis via C(sp3)–H···X Interactions