Panos Marantos
Research Subjects
Research Interests
Panos Marantos has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Konstantinos J. Kyriakopoulos
Engineering Division and Center for AI & Robotics (CAIR), New York University, Abu Dhabi, UAE
6 shared publications - George C. Karras
Department of Informatics and Telecommunications, University of Thessaly, 35131 Lamia, Greece
5 shared publications - Charalampos P. Bechlioulis
University of Patras
3 shared publications Carlos Balaguer
Robotics Lab, Universidad Carlos III de Madrid, Leganes, Madrid, Spain
1 shared publicationElisabeth Menendez
Robotics Lab, Universidad Carlos III de Madrid, Leganes, Madrid, Spain
1 shared publication- Leonidas Dritsas
Department of Electrical & Electronic Engineering Educators, School of Pedagogical and Technological Education, 15122 Athens, Greece
1 shared publication
Latest Publications
- 1 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (2) , 1160-1167
Modeling, Gait Sequence Design, and Control Architecture of BADGER Underground Robot
This letter presents the dynamic modeling, the gait sequence design, and the control architecture of the BADGER autonomous underground robot. BADGER is a modular and articulated robotic mechanism which employs inchworm biomimetic motion to drill and propel within the soil. It is used to drill and manoeuvre in the subsurface for building curved tunnels of small diameter in underground spaces, without the need for open-cut excavation. In order to design efficient motion control strategies, a model-based approach is followed. To this end, the kinematic and the lagrangian dynamic models are derived, which take into account the physical interaction of the robot drill-head with the environment, and are used for designing the inchworm gait sequence and for calculating the actuation torques and forces required to realise the trajectory profiles of the gait sequence. The motion control is executed on a simulation platform or on the actual robot hardware using a Robot Operating System (ROS) control architecture. The gait sequence and the motion controller are validated though an experiment where the BADGER is commanded to drill and follow a straight line path in the underground. The gait sequence for following a generic 3D curvilinear path in the underground is demonstrated in a simulation environment.
- 1 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 6 (2) , 1160-1167
Modeling, Gait Sequence Design, and Control Architecture of BADGER Underground Robot
This letter presents the dynamic modeling, the gait sequence design, and the control architecture of the BADGER autonomous underground robot. BADGER is a modular and articulated robotic mechanism which employs inchworm biomimetic motion to drill and propel within the soil. It is used to drill and manoeuvre in the subsurface for building curved tunnels of small diameter in underground spaces, without the need for open-cut excavation. In order to design efficient motion control strategies, a model-based approach is followed. To this end, the kinematic and the lagrangian dynamic models are derived, which take into account the physical interaction of the robot drill-head with the environment, and are used for designing the inchworm gait sequence and for calculating the actuation torques and forces required to realise the trajectory profiles of the gait sequence. The motion control is executed on a simulation platform or on the actual robot hardware using a Robot Operating System (ROS) control architecture. The gait sequence and the motion controller are validated though an experiment where the BADGER is commanded to drill and follow a straight line path in the underground. The gait sequence for following a generic 3D curvilinear path in the underground is demonstrated in a simulation environment.
- 3 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 28 (6) , 2352-2363
A Robust Predictive Control Approach for Underwater Robotic Vehicles
- 3 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 28 (6) , 2352-2363
A Robust Predictive Control Approach for Underwater Robotic Vehicles
- 24 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Oceanic Engineering
- Vol. 44 (3) , 642-663
Unsupervised Online System Identification for Underwater Robotic Vehicles
This paper presents an unsupervised strategy for online system identification of underwater robotic vehicles. The proposed method consists of four operating modules, namely the state estimation module, the collision avoidance module, the excitation module, and the parameter estimation module, that collaborate online in a closed-loop architecture. The excitation inputs are formulated online, based on the convergence achieved for each actuated degree of freedom, thus speeding up the identification process while concurrently evading overfitting. Additionally, the proposed algorithm guarantees safe operation by avoiding collisions with the workspace boundaries; hence, no human supervision is required during the identification procedure. Moreover, the overall scheme is of low complexity and can be easily integrated into the real-time embedded system framework of underwater robotic vehicles. Finally, the efficacy of the proposed strategy was experimentally verified via an online system identification of a small underwater robotic vehicle, and the accuracy of the estimated parameters was further experimentally evaluated via a trajectory tracking task, by comparing the performance of a PID control scheme that employed feedforward compensation of the identified dynamics, with the corresponding performance of a conventional model-free PID control scheme.
- 24 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Oceanic Engineering
- Vol. 44 (3) , 642-663
Unsupervised Online System Identification for Underwater Robotic Vehicles
This paper presents an unsupervised strategy for online system identification of underwater robotic vehicles. The proposed method consists of four operating modules, namely the state estimation module, the collision avoidance module, the excitation module, and the parameter estimation module, that collaborate online in a closed-loop architecture. The excitation inputs are formulated online, based on the convergence achieved for each actuated degree of freedom, thus speeding up the identification process while concurrently evading overfitting. Additionally, the proposed algorithm guarantees safe operation by avoiding collisions with the workspace boundaries; hence, no human supervision is required during the identification procedure. Moreover, the overall scheme is of low complexity and can be easily integrated into the real-time embedded system framework of underwater robotic vehicles. Finally, the efficacy of the proposed strategy was experimentally verified via an online system identification of a small underwater robotic vehicle, and the accuracy of the estimated parameters was further experimentally evaluated via a trajectory tracking task, by comparing the performance of a PID control scheme that employed feedforward compensation of the identified dynamics, with the corresponding performance of a conventional model-free PID control scheme.
- 4 October 2017
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 92 (1) , 145-158
Vision-based Autonomous Landing Control for Unmanned Helicopters
- 4 October 2017
- Published by Springer Nature in Journal of Intelligent & Robotic Systems
- Vol. 92 (1) , 145-158
Vision-based Autonomous Landing Control for Unmanned Helicopters
- 4 January 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 25 (6) , 2010-2021
Robust Trajectory Tracking Control for Small-Scale Unmanned Helicopters With Model Uncertainties
This paper addresses the trajectory tracking control problem for small-scale unmanned helicopters with model uncertainties. In particular, we propose a robust control scheme that is decomposed into a position and an attitude control modules, operating in a cascaded form, and does not depend on the explicit knowledge of the value of the model parameters. Exploiting the concepts and techniques of prescribed performance control, each module guarantees trajectory tracking with prescribed transient and steady-state response, despite the presence of external disturbances, such as wind gusts and ground effect phenomena. Additionally, a novel reformulation of the translational dynamics reveals a sufficient condition for closed-loop stability and allows us to extract the appropriate attitude commands straightforwardly. Moreover, the derived control algorithms are of low complexity and thus can be efficiently implemented on low-cost, aerial embedded systems of limited power and computational resources. Finally, the efficacy of the proposed control scheme is verified via extensive experimental studies using an autonomous small-scale helicopter.
- 4 January 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Control Systems Technology
- Vol. 25 (6) , 2010-2021
Robust Trajectory Tracking Control for Small-Scale Unmanned Helicopters With Model Uncertainties
This paper addresses the trajectory tracking control problem for small-scale unmanned helicopters with model uncertainties. In particular, we propose a robust control scheme that is decomposed into a position and an attitude control modules, operating in a cascaded form, and does not depend on the explicit knowledge of the value of the model parameters. Exploiting the concepts and techniques of prescribed performance control, each module guarantees trajectory tracking with prescribed transient and steady-state response, despite the presence of external disturbances, such as wind gusts and ground effect phenomena. Additionally, a novel reformulation of the translational dynamics reveals a sufficient condition for closed-loop stability and allows us to extract the appropriate attitude commands straightforwardly. Moreover, the derived control algorithms are of low complexity and thus can be efficiently implemented on low-cost, aerial embedded systems of limited power and computational resources. Finally, the efficacy of the proposed control scheme is verified via extensive experimental studies using an autonomous small-scale helicopter.
- 1 May 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10504729,p. 5272-5277
Autonomous model-free landing control of small-scale flybarless helicopters
This paper proposes an autonomous landing scheme for a small-scale flybarless helicopter equipped with low-cost navigation sensors. The main contribution of this paper is the design of a model-free motion controller that guarantees autonomous landing with prescribed transient and steady state response, despite the presence of external disturbances acting on the vehicle. The proposed control scheme is of low complexity and does not require any knowledge of the helicopter dynamic parameters. Hence, it can be easily implemented in embedded control platforms integrated on small-scale helicopters. In order to provide the controller with accurate estimation of the vehicle's state vector during the landing procedure, an asynchronous sensor fusion and state estimation algorithm, based on an Unscented Kalman Filter (UKF), has been also implemented. The performance and the efficiency of the overall scheme are experimentally verified using a small-scale flybarless helicopter in a real autonomous landing process.
- 1 May 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10504729,p. 5272-5277
Autonomous model-free landing control of small-scale flybarless helicopters
This paper proposes an autonomous landing scheme for a small-scale flybarless helicopter equipped with low-cost navigation sensors. The main contribution of this paper is the design of a model-free motion controller that guarantees autonomous landing with prescribed transient and steady state response, despite the presence of external disturbances acting on the vehicle. The proposed control scheme is of low complexity and does not require any knowledge of the helicopter dynamic parameters. Hence, it can be easily implemented in embedded control platforms integrated on small-scale helicopters. In order to provide the controller with accurate estimation of the vehicle's state vector during the landing procedure, an asynchronous sensor fusion and state estimation algorithm, based on an Unscented Kalman Filter (UKF), has been also implemented. The performance and the efficiency of the overall scheme are experimentally verified using a small-scale flybarless helicopter in a real autonomous landing process.