BUBora Uzel

Bora Uzel

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bora Uzel has a total of 98 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Asymmetric Basin Evolution and Fault Kinematics in the Büyük Menderes Graben (Western Anatolia): Insights from 2D Seismic Reflection Data

    by Rabia Oğuz, Nuretdin Kaymakcı, Bora Uzel

    The Büyük Menderes Graben (BMG) is a major E-W-oriented extensional basin in Western Anatolia, which exhibits along-strike variability. Yet, the factors controlling its internal asymmetry and the dominant boundary fault remain unresolved, mostly because previous studies of the BMG lack a three-dimensional perspective. This study integrates 2D seismic reflection data, well-log information, and 3D structural modeling between Aydın and Kuyucak to reassess the kinematic evolution of the graben.Seismic reflection data reveal a distinctly asymmetric basin infill geometry, where early syn-rift deposits form clear wedge geometries and onlap patterns directed toward the southern graben-bounding fault, indicating that accommodation was primarily created along the southern margin. Overlying units show draping, subtle rollover structures, and thickening toward the south, further supporting continuous activity on the southern boundary fault throughout basin development, resembling a rift-climax system tracts described in the literature for half-grabens. The stratigraphic architecture and fault-sediment relationships observed on the N-S seismic sections are consistent with sandbox experiments and conceptual models depicting how major listric faults control the evolution of extensional basins.A key outcome of this study is the recognition of a second control on basin asymmetry: a series of transverse, consistently east-dipping normal faults with dominant fault polarity is imaged on E-W seismic lines across the BMG. These structures generate localized depocenters, divergent reflection patterns, and westward-increasing thickness trends associated with progradational sediment input. When combined with GPS and InSAR results, both of which indicate a westward increase in extension rates across the BMG, the transverse faults are interpreted as the structural response to spatially variable extension, accompanied by a delta progradation throughout basin evolution.The apparent symmetry observed on 2D seismic sections is primarily the result of the activation of high-angle normal faults along the northern margin during the Quaternary, which locally produced a more symmetrical basin infill geometry. The 3D structural model, on the other hand, further demonstrates that the basin deepens toward the southern boundary fault, whereas the northern fault retains its irregular geometry and limited subsidence. Geodetic slip-rate modeling also favors a north-dipping, active structure, aligning with the southern boundary fault. These observations suggest that the low-angle normal fault on the northern margin, commonly referred to as the Büyük Menderes Detachment Fault, is a relic structure of an earlier extensional phase, predating the formation of the current basin.Overall, stratigraphic geometries, structural characteristics, and geodetic data converge on a coherent conclusion: the BMG evolved through multi-phase extension, dominated by the southern boundary fault, while transverse east-dipping faults and delta progradation enhanced internal basin asymmetry. These results refine the current understanding of rift evolution and faulting history in Western Anatolia and emphasize the role of spatially variable extension in shaping extensional basins.Keywords: Eastern Mediterranean tectonics, Büyük Menderes Graben, extensional basin evolution, seismic reflection data, normal fault kinematics, active deformation.

  • Open Access

    Complex active deformation along southwestern part of the East Anatolian Fault Zone: Insights from 2023 Türkiye earthquake doublet 

    by Arda A. Özacar, M. Emin Ayhan, Bora Uzel, Eyup Sopacı, Syed Tanvir Shah, Zeynep Gülerce, Nuretdin Kaymakcı, Hakan Bora Okay, F. Bora Rojay

    The southwestern continuation of the East Anatolian Fault Zone (EAFZ), specifically its relationship with Iskenderun Basin, the Dead Sea Fault Zone (DSFZ) and Cyprus Slap is still enigmatic. In 2023, nearby splays of EAFZ in the southwest are ruptured by two large earthquakes that are nine hours apart. At first, Pazarcık earthquake (M7.8) initiated at a secondary fault, later jump to the main strand of EAFZ and propagated bilaterally producing a surface rupture exceeding 315 km in length. The Ekinözü earthquake (M7.7) triggered nine hours later also displayed bilateral rupture propagation and produced a 140 km long surface rupture. Surface deformations associated to both events that ruptured multiple fault segments with left-lateral strike-slip mechanism, are mapped in detail using satellite images and field observations. Surface offsets of both events are highly variable, reaches up to 8 m, and controlled mainly by subsurface slip. The accuracy of mapped active faults prior to the doublet, reduce significantly along plains where distributed deformations are common and occasionally surface rupture follows mapped inactive faults suggesting reactivation of old faults or unrecognized active faulting in the area.Large 19th century earthquakes previously associated to the faults ruptured during this doublet, are likely mislocated and these segments were accumulating stress at least for 500 years. Earthquake mechanisms recorded before and after the doublet revealed strike-slip regime corresponding well with EAFZ but towards south, extensional events become abundant. Based on the computed stress field, east-west striking Çardak fault ruptured during the second event, is not optimally oriented for left-lateral failure but suffered from noticeable static stress increase and rate-and-state friction based simulations including both static and dynamic effects suggested that it was at the end of its seismic cycle. Static stress changes resulted from the doublet also indicate pronounced increases, especially along Malatya, Savrun, Türkoğlu and Antakya fault segments which are remained as seismic gaps.GPS based slip models along multiple profiles constrained left-lateral slip rates of ruptured faults and suggested an increase in slip rate from south to north across EAFZ. During Pazarcık earthquake, rupture made a sharp bend towards south rather than following parallel fault segments towards Adana which are previously proposed as the western continuation of EAFZ. Our field observations indicated a fault traversing the Amanos mountains parallel to EAFZ along which fault kinematics and compiled GPS data together suggest left-lateral motions. Based on these findings, alternative regional kinematic models assuming Iskenderun and Maras blocks as independent or intact are established and later utilized for probabilistic seismic hazard analysis throughout the Adana basin by considering variable site conditions and basin effect in long spectral periods.

  • Open Access

    Measuring slip rate variability on the Eşen Fault, SW Türkiye, with cosmogenic chlorine-36 nuclide analysis

    by Natalie Forrest, Laura Gregory, Tim Craig, Tim Wright, Richard Shanks, Bora Uzel, Elif Çam

    Seismic hazard models often assume near-constant earthquake recurrence intervals on faults since the Last Glacial Maximum, approximately 15,000 years ago. However, it is tricky to show that real fault systems exhibit this behaviour, particularly for distributed networks of normal faults in extensional regimes. Instead, data is limited to historical seismology records, which is likely over a much shorter time than earthquake recurrence intervals, or a single time-averaged Holocene slip rate from paleoseismology methods. Neither method measures slip rate variability over multiple earthquake cycles.Cosmogenic nuclide analysis on limestone bedrock fault scarps, combined with Bayesian modelling, is an established method to interpret exhumation histories of normal faults since the Last Glacial Maximum. Production of chlorine-36 (36Cl) is primarily by interaction of calcium-40 in the limestone scarp with cosmic rays. Concentration profiles of 36Cl on a fault scarp therefore correlate with fault slip in earthquakes. Previous 36Cl studies demonstrate slip rate variability of normal faults in Italy and Türkiye.We apply this technique to interpret the slip history of the Eşen Fault, a major normal fault in southwest Türkiye with no known historical seismicity. Bayesian models suggest the last major earthquake was 1000 years ago, but prior to that, there was a period of fast slip of 2-3 mm/yr, which exposed at least 5 m of scarp in 2-3 kyr. Before that, the slip rate was much lower, at about 1 mm/yr. These results demonstrate slip rate variability, which informs our understanding of fault dynamics over millennia, and may help to improve seismic hazard models.

  • Open Access

    Volcanism straddling the Miocene–Pliocene boundary on Patmos and Chiliomodi islands (southeastern Aegean Sea): insights from new 40Ar ∕ 39Ar ages

    by Katharina M. Boehm, Klaudia F. Kuiper, Bora Uzel, Pieter Z. Vroon, Jan R. Wijbrans

    The island of Patmos, in the eastern Aegean Sea, consists almost entirely of late Miocene to Pliocene volcanic rocks. The magmatism in the Aegean is governed by subduction of the African plate below the Eurasian plate, back-arc extension, slab rollback, slab edge processes and westward extrusion of central Anatolia to the west along the Northern Anatolian Fault into the Aegean domain. The evolution of the Aegean basin is that of a back-arc setting, with a southerly trend in the locus of both convergent tectonics and back-arc stretching, allowing intermittent upwelling of arc, lithospheric and asthenospheric magmas. Here, we present new 40Ar/39Ar age data for Patmos and the nearby small island of Chiliomodi to place this volcanism in a new high-resolution geochronological framework. High-resolution geochronology provides a key to understanding the mechanisms of both the tectonic and magmatic processes that cause the extrusion of magma locally and sheds light on the tectonic evolution of the larger region of the back-arc basin as a whole. The volcanic series on Patmos is alkalic, consistent with a back-arc extensional setting, and ranges from trachybasalt to phonolites, trachytes and rhyolites, with SiO2 ranging from 51.6 wt % to 80.5 wt %, K2O ranging from 2 wt % to 11.8 wt % and extrusion ages ranging from 6.59 ± 0.04 (0.14) Ma to 5.17 ± 0.02 (0.11) Ma. Volcanism on Patmos and adjacent Chiliomodi can be understood as a combination of mantle and crustal tectonic processes including the influence of transform faults and rotational crustal forces that also caused the widening of the southern Aegean basin due to two opposite rotational poles in the east and west and rollback of the subducting slab south of Crete.


  • Open Access

    Volcanism straddling the Mio-Pliocene boundary on Patmos (East Aegean Sea): Insights from new 40Ar/39Ar ages

    by Katharina M. Boehm, Klaudia F. Kuiper, Bora Uzel, Pieter Z. Vroon, Jan R. Wijbrans

    The island of Patmos, in the eastern Aegean Sea, consists almost entirely of late Miocene to Pliocene volcanic rocks. The magmatism in the Aegean is governed by subduction of the African plate below the Eurasian plate, back-arc extension, slab roll-back, slab edge processes and westward extrusion of central Anatolia to the west along the Northern Anatolian Fault into the Aegean domain, The evolution of the Aegean basin is that of a back arc setting, with a southerly trend in the locus of both convergent tectonics, and back arc stretching, allowing intermittent upwelling of arc, lithospheric and asthenospheric magmas. Here, we present new 40Ar/39Ar age data for Patmos and the nearby small island of Chilomodi to place this volcanism in a new high resolution geochronological framework. High resolution geochronology provides a key to understanding the mechanisms of both the tectonic and magmatic processes that cause the extrusion of magma locally, and sheds light on the tectonic evolution of the larger region of the back-arc basin as a whole. The volcanic series on Patmos is alkalic, consistent with a back arc extensional setting and ranges from trachybasalt, to phonolites, trachytes and rhyolites, with SiO2 ranging from 51.6–80.5 wt.% and K2O from 2–11.8 wt.% with extrusion ages ranging from 6.59 ± 0.14 Ma–5.17 ± 0.11 Ma. Volcanism on Patmos and adjacent Chilomodi can be understood by a combination of mantle and crustal tectonic processes including influence of transform faults and rotational crustal forces that also caused the opening of the south Aegean basin due to roll back of the subducting slab south of Crete.

  • Predictive performance of current ground motion models for recorded strong motions in 2020 Samos Earthquake

    by Zeynep Gülerce, Burak Akbaş, A. Arda Özacar, Eyüp Sopacı, Fatih M. Önder, Bora Uzel, Gizem Can, Elife Cakir, Makbule Ilgaç, Berkan Söylemez, et al.


  • The site effects in Izmir Bay of October 30 2020, M7.0 Samos Earthquake

    by Kemal Onder Cetin, Selim Altun, Aysegul Askan, Mustafa Akgün, Alper Sezer, Cem Kıncal, Özkan Cevdet Özdağ, Yaprak İpEk, Berna Unutmaz, Zeynep Gülerce, et al.


  • Open Access

    Deformation in SW Anatolia (Turkey) Documented by Anisotropy of Magnetic Susceptibility Data

    by Murat Özkaptan, Erhan Gülyüz, Bora Uzel, Cor G. Langereis, A. Arda Özacar, Nuretdin Kaymakcı

    Convergence between the Eurasian and the African plates in the West Anatolian‐Aegean region results in a trench retreat due to slab roll‐back and tearing of the subducted African lithosphere. The upper plate response of this process gave way to back‐arc extension in the region. We have conducted a very detailed anisotropy of magnetic susceptibility (AMS) study on the Neogene rocks in SW Anatolia to unravel the style and magnitudes of deformation. For this purpose, from 83 sites in 11 structurally homogeneous domains, 1,680 paleomagnetic samples were analyzed. The results show that AMS fabrics are related to the tectonic deformation and that the magnetic lineation (maximum susceptibility axis, k1) is parallel to inferred maximum extension, while minimum susceptibility (k3) is typically normal to the bedding plane, corresponding to a preserved compaction associated with deposition fabric. The intermediate axis (k2) is parallel to a second extension direction and indicates that the region has been under the control of multi‐directional extension during the Neogene. Two main magnetic lineation directions are identified and represent Oligocene to middle Miocene E‐W, and late Miocene to Pliocene NW‐SE oriented extension. The magnetic lineation directions are dominantly parallel or perpendicular to the general strikes of the normal faults. The results show that the deformation in the region resembles two differentially stretched rubber sheets under the influence of SW oriented extension, exerted by the southward retreating Eastern Mediterranean subduction system.


  • Open Access

    Revealing the Deformation of SW Anatolia (Turkey) by Anisotropy of Magnetic Susceptibility (AMS) Data

    by Nuretdin Kaymakcı, Murat Özkaptan, Erhan Gülyüz, Bora Uzel, Cor Langereis, A. Arda Ozacar

    Convergence between the Eurasian and the African plates in the West Anatolian-Aegean region results in a trench retreat due to slab roll-back and tearing of the subducted African lithosphere. The upper plate response of this process gave way to back-arc extension in the region. In this context, we have conducted a very rigorous AMS study on the Neogene units in SW Anatolia to unravel the style and amounts of deformation. For this purpose, from 83 sites in 11 structurally homogeneous domains, 1680 paleomagnetic samples were analyzed. Obtained results are used to determine principal strain directions to unravel overall deformation styles and amounts in the region. The results have shown that AMS is related to the tectonic deformation, which facilitated that the AMS directions correspond to cumulative principal strains. Maximum susceptibility is parallel to the major extension (k), minimum susceptibility (k) corresponds to compaction after deposition, almost always normal to the bedding plane. The intermediate axis (k) found to be parallel to a second extension direction that the region has been under the control of multi-directional extension during Neogene. Two mean anisotropy directions are identified. These are Oligocene-Middle Miocene NW-SE, and Late Miocene-Pliocene NE-SW directed extension. The mean anisotropy directions are generally parallel or perpendicular to the general strikes of the normal faults. The results have shown that the deformation in the region resembles to differentially stretched rubber sheet under the influence of SW directed extension exerted by the southwards retreating Eastern Mediterranean subduction system.